Influence of fly ash on corrosion resistance and chloride ion permeability of concrete

BOĞA A. R., TOPÇU İ. B.

CONSTRUCTION AND BUILDING MATERIALS, cilt.31, ss.258-264, 2012 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 31
  • Basım Tarihi: 2012
  • Doi Numarası: 10.1016/j.conbuildmat.2011.12.106
  • Dergi Adı: CONSTRUCTION AND BUILDING MATERIALS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.258-264
  • Anahtar Kelimeler: Concrete, Fly ash, Durability, Corrosion, Accelerated corrosion test, Rapid chloride permeability test, BLAST-FURNACE SLAG, REINFORCED-CONCRETE, STEEL, PERFORMANCE, DURABILITY, PENETRATION, INHIBITORS, BEHAVIOR, PLAIN
  • Eskişehir Osmangazi Üniversitesi Adresli: Evet

Özet

In this study, concrete and reinforced concrete have been produced by using fly ash (FA) at 0%, 15%, 30% and 45% ratios replace by CEM I 42.5 R cement which is used as 300 doses. The specimens produced have been kept in two different cure durations which are for 28 and 56 days and in two different conditions which are air and water. Physical, mechanical, and durability properties of the produced specimens of concrete and reinforced concrete have been determined. Unit weight, ultrasonic pulse velocity, dynamic elasticity module, Schmidt hardness, splitting-tensile, compressive, and chloride ion permeability tests have been done on concrete specimens. On reinforced concrete specimens, accelerated corrosion tests have been done. As a result of the tests, it was concluded that it is very important that water cure is done for 56 days and also that quite durable concretes against corrosion can be produced by using FA at 15% ratios replace by cement. (C) 2012 Elsevier Ltd. All rights reserved.