Natural convection in tilted rectangular enclosures with a vertically situated hot plate inside


ALTAÇ Z., Kurtul O.

APPLIED THERMAL ENGINEERING, cilt.27, ss.1832-1840, 2007 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 27
  • Basım Tarihi: 2007
  • Doi Numarası: 10.1016/j.applthermaleng.2007.01.006
  • Dergi Adı: APPLIED THERMAL ENGINEERING
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.1832-1840
  • Eskişehir Osmangazi Üniversitesi Adresli: Evet

Özet

A numerical study of laminar natural convection in tilted rectangular enclosures that contain a vertically situated hot plate is performed. The plate is very thin and isothermal on both lateral ends, and it acts as a heat source within the medium. Three surfaces of the rectangular enclosure are insulated while one lateral surface is cold. Navier-Stokes equations, continuity equation and the energy equation, along with the Boussinesq approximation, are expressed in the form of vorticity-transport equations. All the pertinent equations are solved using the finite volume method with SIMPLE algorithm. The Rayleigh numbers and the tilt angle of the enclosure are ranged from 105 to 107 and from 0 degrees to 90 degrees, respectively. The aspect ratios of the rectangular enclosures that are considered in this study are A = 1 and A = 2. The isotherms and streamlines are produced for various Rayleigh numbers and geometrical conditions, and steady-state Nusselt numbers are computed. The steady-state plate-surface-averaged Nusselt numbers are computed for each case as a function of Rayleigh number and other non-dimensional geometrical parameters and a correlation useful for practical problems was derived. (C) 2007 Elsevier Ltd. All rights reserved.