Synthesis and characterization of cylindrical electrode with sucrose binder as advanced electrode materials for copper 3D-electro-oxidation

Şamdan C.

Environmental Science and Pollution Research, cilt.30, sa.44, ss.99511-99528, 2023 (SCI-Expanded) identifier identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 30 Sayı: 44
  • Basım Tarihi: 2023
  • Doi Numarası: 10.1007/s11356-023-29388-7
  • Dergi Adı: Environmental Science and Pollution Research
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus, IBZ Online, ABI/INFORM, Aerospace Database, Agricultural & Environmental Science Database, Aqualine, Aquatic Science & Fisheries Abstracts (ASFA), BIOSIS, CAB Abstracts, EMBASE, Environment Index, Geobase, MEDLINE, Pollution Abstracts, Veterinary Science Database, Civil Engineering Abstracts
  • Sayfa Sayıları: ss.99511-99528
  • Anahtar Kelimeler: 3-phase 3-dimensional electro-oxidation reactor, Cu2+ removal, Microelectrodes, SDs modification, Sucrose-bonded cylindrical electrode
  • Eskişehir Osmangazi Üniversitesi Adresli: Evet

Özet

This study produced a biomass-based cylindrical electrode containing sucrose (an organic binder). The Cu2+ removal performance of the synthesized sucrose-bonded cylindrical electrode was evaluated in a 3-phase 3-dimensional electro-oxidation reactor (3D-EO) and the classical electro-oxidation method (2D-EO). Sodium Dodecyl Sulfate (SDs) was grafted onto activated carbon and used as microelectrode in 3D-EO reactors. SDs grafting resulted in a 57% reduction in the micropores of activated carbon. Therefore, the surface area of carbon after grafting decreased from 1328 m2/g to 580 m2/g. The sucrose-bonded cylindrical electrode has a rich carbon structure and consists of 84.04 wt% C, 12.10 wt% O and 3.20 wt%Si. According to CV measurement, the sucrose-bonded cylindrical electrode gives a surface reaction against Cu2+ at voltages lower than -0.62 V. Increasing the potential difference from 1V to 3V in 2D-EO and 3D-EO processes led to the removal of Cu2+ from the solution. The 3D-EO reactor achieved a removal rate of 87.12% at 3V. The 100 ppm solution was treated with a 3D-EO reactor containing 6 g/L of PC/SDs400Ws for 60 min, successfully removing 91.22% of Cu2+.