Influence of Irradiation Time on Structural, Morphological Properties of ZnO-NRs Films Deposited by MW-CBD and Their Photodiode Applications


Creative Commons License

ILICAN S., GÖRGÜN K., ÇAĞLAR Y., ÇAĞLAR M.

JOURNAL OF NANOMATERIALS, cilt.2017, 2017 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 2017
  • Basım Tarihi: 2017
  • Doi Numarası: 10.1155/2017/6308174
  • Dergi Adı: JOURNAL OF NANOMATERIALS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Eskişehir Osmangazi Üniversitesi Adresli: Evet

Özet

Microwave-assisted chemical bath deposition (MW-CBD) was used to deposit zinc oxide nanorods (ZnO-NRs) films by using different microwave irradiation time. The films exhibit a good crystallinity having a hexagonal wurtzite phase formation. Although the dominant preferred orientation was not observed for the ZnO-5 and ZnO-10, ZnO-8 showed (002) preferred orientation. The emission scanning electron microscope (FESEM) showed almost randomly oriented hexagonal nanorods on the surface. A slight decrease in the length of the observed hexagonal nanorods due to the increase in the irradiation time was observed, changing from 550 nm to 300 nm. The p-Si/n-ZnO-NRs heterojunction photodiodes were fabricated. The current-voltage characteristics of these photodiodes were investigated under dark and different illumination intensity. An increase in the reverse current with increasing illumination intensity confirmed that the fabricated photodiodes exhibited a photoconducting behavior. In addition, the barrier height and series resistance values of the photodiodes were determined from capacitance-voltage measurements.