Effect of admixture ratio and aggregate type on self-leveling screed properties

CANBAZ M., TOPÇU İ. B., Atesin O.

CONSTRUCTION AND BUILDING MATERIALS, cilt.116, ss.321-325, 2016 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 116
  • Basım Tarihi: 2016
  • Doi Numarası: 10.1016/j.conbuildmat.2016.04.084
  • Dergi Adı: CONSTRUCTION AND BUILDING MATERIALS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.321-325
  • Anahtar Kelimeler: Self-leveling screed, Crushed sand, River sand, New generation superplasticizer, COMPACTING REPAIR MORTARS, FLY-ASH, FINE AGGREGATE, NANO-CUO, SUBSTITUTION, CEMENT, FLOW
  • Eskişehir Osmangazi Üniversitesi Adresli: Evet

Özet

Screeds are construction materials used to correct surface defects and to bevel floors. It is intended to prevent a variety of problems in conventional cementitious screed with a new screed system such as self leveling, minimized cracking risk, pumpable, self-leveling, curing speedily, that can be applied quickly, which can reduce the dead load due to the property to make thin coatings. In this study, it was produced self-leveling screeds with three types of aggregate and new generation superplasticizer. Slump flow, compressive strength, unit weight, ultrasonic pulse velocity, capillarity, water absorption and shear strength tests were conducted. It was observed that, when aggregate was getting finer, T500 time was decreased and flowability was increased. At the end of the study; the use of 0-1 mm river sand and 1% plasticizer in the production of the self-leveling screed (SLS) gave more positive results. (c) 2016 Elsevier Ltd. All rights reserved.