The Utilization of Waste Magnesite in the Production of the Cordierite Ceramic

AŞKIN A., Tatar I., Kilinc S., Tezel O.

3rd International Conference on Energy and Environment Research (ICEER), Barcelona, İspanya, 7 - 11 Eylül 2016, cilt.107, ss.137-143 identifier identifier

  • Yayın Türü: Bildiri / Tam Metin Bildiri
  • Cilt numarası: 107
  • Doi Numarası: 10.1016/j.egypro.2016.12.151
  • Basıldığı Şehir: Barcelona
  • Basıldığı Ülke: İspanya
  • Sayfa Sayıları: ss.137-143
  • Anahtar Kelimeler: cordierite, single phase cordierite, sintering, waste magnesite
  • Eskişehir Osmangazi Üniversitesi Adresli: Evet

Özet

Cordierite ceramics comprises MgO as the main ingredient. In this work, cordierite composition was prepared with raw magnesite (CR) and with waste magnesite (CW) generated during the magnesite processing, sintered at various temperatures, between 1250-1350 degrees C, and heating rates, and then samples were analyzed with DTA, XRD and their bulk density, water absorption and porosity were determined. The cordierite composition prepared with waste magnesite and sintered at 1325 degrees C and 3 degrees C/min heating rate, produced a single-phase cordierite with 1.64 g/cm3 bulk density, and 36.5%, and 22.5% porosity and water absorption, respectively, which demonstrates its suitability for the cordierite production. (C) 2017 The Authors. Published by Elsevier Ltd.