Numerical Investigation of the Air-Side Thermal Hydraulic Performance of a Louvered-Fin and Flat-Tube Heat Exchanger at Low Reynolds Numbers

ERBAY L. B., UĞURLUBİLEK N., ALTUN Ö., DOĞAN B.

HEAT TRANSFER ENGINEERING, cilt.38, sa.6, ss.627-640, 2017 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 38 Sayı: 6
  • Basım Tarihi: 2017
  • Doi Numarası: 10.1080/01457632.2016.1200382
  • Dergi Adı: HEAT TRANSFER ENGINEERING
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.627-640
  • Eskişehir Osmangazi Üniversitesi Adresli: Evet

Özet

In this study, the air-side heat transfer and fluid flow characteristics of a louvered-fin and flat-tube type heat exchanger used in the household refrigerators were investigated numerically. Louver angles of 20 degrees, 24 degrees, 28 degrees, and 32 degrees and fin pitches of 1.50, 2.00, and 2.50mm were tested. To represent domestic refrigeration systems, the simulations were conducted for low Reynolds numbers, between 223 and 573. The results were evaluated using the volume goodness factor for the air side. The best performance was obtained with louver angle of 20 degrees and fin pitch of 1.50mm at Reynolds number of 229 over the investigated cases. It was demonstrated that the Colburn j-factor, friction factor, Stanton number, and volume goodness factor did not change linearly with respect to the parameters considered.