Preparation and characterization of carbon molecular sieves from chestnut shell by chemical vapor deposition

DEMİRAL H., DEMİRAL İ.

ADVANCED POWDER TECHNOLOGY, cilt.29, sa.12, ss.3033-3039, 2018 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 29 Sayı: 12
  • Basım Tarihi: 2018
  • Doi Numarası: 10.1016/j.apt.2018.07.015
  • Dergi Adı: ADVANCED POWDER TECHNOLOGY
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.3033-3039
  • Anahtar Kelimeler: Carbon molecular sieve, Chemical vapor deposition, Gas adsorption, ACTIVATED CARBON, CO2 ADSORPTION, PALM SHELL, METHANE, BIOMASS, SEPARATION, HYDROGEN
  • Eskişehir Osmangazi Üniversitesi Adresli: Evet

Özet

In this study, carbon molecular sieves (CMS) were produced from chestnut shell by chemical activation process followed by chemical vapor deposition (CVD) of methane. The influences of deposition temperature (800-900 degrees C), time (15-60 min) and flow rate of CH4 (100-300 mL/min) on pore development of carbon molecular sieve were investigated. The produced CMSs were characterized by several techniques such as N-2 adsorption, CO2 adsorption, CH4 adsorption, elemental analysis, FTIR analysis and SEM analysis. The textural analysis of the CMS samples showed the successful deposition of methane on pores of the produced activated carbon derived from chestnut shell to yield a microporous CMS with a narrow pore size distribution. The deposition temperature, time and flow rate of CH4 were shown to strongly affect the pore structure of the CMS. The maximum CO2 adsorption capacity (525.7 mg/g) was obtained at a deposition temperature of 850 degrees C, time of 30 min, and CH4 flow rate of 100 mL/min. (C) 2018 The Society of Powder Technology Japan. Published by Elsevier B.V. and The Society of Powder Technology Japan. All rights reserved.