INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES, vol.40, pp.701-710, 2003 (SCI-Expanded)
Predictive empirical models for the mechanical properties of rock masses have been used in rock engineering because direct measurement of the properties is difficult due to the presence of discontinuities. Such empirical models are open to improvement because they are based on collected data. The purposes of the present study are to assess the existing empirical equations and to develop a new empirical approach. For this reason, in the first stage of the study, the prediction performance of the existing models proposed for predicting the deformation modulus of rock masses were evaluated statistically by using a database including 115 data values obtained from in situ plate loading and dilatometer tests. A new empirical approach with higher prediction capacity than the existing empirical models was developed in the subsequent stage of the study. The new empirical model considers the modulus ratio of intact rock (E-i/UCS), rock quality designation (RQD) and weathering degree (WD). Although, data obtained from very weak and weak rock masses were included in the development of the new empirical equation, the type of rocks employed in the study were limited. Therefore, a crosscheck between the new empirical equation and previous empirical approaches should be performed in the design stage. (C) 2003 Elsevier Ltd. All rights reserved.