Effect of Aluminum Casting Dross Addition on Mechanical Properties and Microstructure in Aluminum Foam Production Alüminyum Köpük Üretiminde Alüminyum Döküm Cürufu İlavesinin Mekanik Özelliklere ve Mikroyapıya Etkisi
El-Cezeri Journal of Science and Engineering, cilt.9, sa.3, ss.996-1004, 2022 (Scopus)
- Yayın Türü: Makale / Tam Makale
- Cilt numarası: 9 Sayı: 3
- Basım Tarihi: 2022
- Doi Numarası: 10.31202/ecjse.1020426
- Dergi Adı: El-Cezeri Journal of Science and Engineering
- Derginin Tarandığı İndeksler: Scopus
- Sayfa Sayıları: ss.996-1004
- Anahtar Kelimeler: aluminum foam, characterization, compressive strength, Dross
- Eskişehir Osmangazi Üniversitesi Adresli: Evet
Özet
© 2022, TUBITAK. All rights reserved.In the study, Al foams were produced using 6063 Al alloy casting dross and Boric acid. Foam materials were sintered at 130 ºC for 1 hour and at 550 ºC for 3 hours. The microstructure was analyzed with optical and scanning electron microscopes (SEM). Compression strength was measured with a compression tester. The porosity increased from 34.8% to 37.8%, the compressive strength increased from 12.43 MPa to 20.25 MPa, and the hardness increased from 98 HV to 115 HV with increasing dross amount.