Anionically reinforced hydrogel network entrapped fungal cells for retention of cadmium in the contaminated aquatic media

Celik S., AKAR S., ŞÖLENER M., AKAR T.

JOURNAL OF ENVIRONMENTAL MANAGEMENT, cilt.204, ss.583-593, 2017 (SCI-Expanded) identifier identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 204
  • Basım Tarihi: 2017
  • Doi Numarası: 10.1016/j.jenvman.2017.08.049
  • Dergi Adı: JOURNAL OF ENVIRONMENTAL MANAGEMENT
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.583-593
  • Anahtar Kelimeler: p(MPA-co-AMPS) matrix, Biosorptive treatment, Equilibrium characterization, Kinetics, Immobilized biomass, AQUEOUS-SOLUTION, WASTE-WATER, METAL REMOVAL, GEL BEADS, BIOSORPTION, CD(II), ADSORPTION, EQUILIBRIUM, IONS, BIOSORBENT
  • Eskişehir Osmangazi Üniversitesi Adresli: Evet

Özet

A novel biomass/polymer composite was fabricated by embedding Thamnidium elegans cells in acrylic network of p(3-Methoxyprophyl)acrylamide p(MPA) enriched with 2-Alcrylamido-2-methyl-1-propane sulfonic acid (AMPS). Cd(II) retention potential of hydrogel (p(MPA-co-AMPS)) increased by 20.66% times after this enrichment. The gel matrix could be effectively entrapped the biomass and resulting sorbent applied to remove Cd(II) from water in batch and continuous modes. The main physico-chemical parameters are discussed in addition to characterization, regeneration and application studies of the suggested sorbent. Equilibrium occurred within 30 min and Langmuir model predicted the equilibrium data. Kinetics of Cd(II) removal onto immobilized biomass is modeled using the pseudo-second-order rate equation. Maximum monolayer sorption capacity was estimated to be 123.76 mg g(-1) at 25 degrees C. Designed composite was successfully applied for the removal of Cd(II) from industrial wastewater. EDTA and HNO3 can be efficiently used for Cd(II) recovery and composite sorbent recycled for at least 12 cycles with nearly stable sorption performance. (C) 2017 Elsevier Ltd. All rights reserved.