The Usability of Boric Acid as an Alternative Foaming Agent on the Fabrication of Al/Al<sub>2</sub>O<sub>3</sub> Composite Foams

Yaman B., Onuklu E., Korpe N.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, sa.9, ss.4319-4328, 2017 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Basım Tarihi: 2017
  • Doi Numarası: 10.1007/s11665-017-2911-4
  • Dergi Adı: JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.4319-4328
  • Anahtar Kelimeler: Al foam, alumina reinforced Al composite foam, boric acid, boron oxide, SPACE-HOLDER TECHNIQUE, MECHANICAL-PROPERTIES, COMPRESSIVE BEHAVIOR, ALUMINUM FOAMS, ENERGY-ABSORPTION, METAL FOAMS, PARTICLE, ADDITIONS
  • Eskişehir Osmangazi Üniversitesi Adresli: Evet

Özet

Pure Al and alumina (2, 5, 10 wt.% Al2O3)-added Al composite foams were fabricated through powder metallurgy technique, where boric acid (H3BO3) is employed as a new alternative foaming agent. It is aimed to determine the effects of boric acid on the foaming behavior and cellular structure and also purposed to develop the mechanical properties of Al foams by addition of Al2O3. Al and Al composite foams with porosity fraction in the range of 46-53% were achieved by sintering at 620 A degrees C for 2 h. Cell morphology was characterized using a combination of stereomicroscope equipped with image analyzer and scanning electron microscopy. Microhardness values were measured via using Vickers indentation technique. Quasi-static compression tests were performed at strain rate of 10(-3) s(-1). Compressive strength and energy absorption of the composite foams enhanced not only by the increasing weight fraction of alumina, but also by the usage of boric acid which leads to formation of boron oxide (B2O3) acting as a binder in obtaining dense cell walls. The results revealed that the boric acid has outstanding potential as foaming agent in the fabrication of Al and Al composite foams by providing improved mechanical properties.