APPRAISAL OF THE EFFECT OF HUMIDITY ON TRIAXIAL COMPRESSIVE STRENGTH OF MARL MATERIAL BY NUMERICAL MODELING


Creative Commons License

EMİR E., BEYHAN S.

ACTA GEODYNAMICA ET GEOMATERIALIA, cilt.13, sa.1, ss.103-118, 2016 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 13 Sayı: 1
  • Basım Tarihi: 2016
  • Doi Numarası: 10.13168/agg.2015.0045
  • Dergi Adı: ACTA GEODYNAMICA ET GEOMATERIALIA
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Sayfa Sayıları: ss.103-118
  • Eskişehir Osmangazi Üniversitesi Adresli: Evet

Özet

When it's essential to conduct intact rock strength tests on saturated samples to be representative of rock mass, clay bearing rocks such as marl which might present water sensitive behavior should be carefully inspected. In the following water table study, rock samples of Tuncbilek region that tend to fracture were alternatively conditioned in a climate cabin. According to the underground mine weather information taken from Tuncbilek region, triaxial compression tests were performed on oven dried marl samples and conditioned in 60 % Relative Humidity ( RH), 80 % RH and 90 % RH at 17.6 degrees C. Calculated values of Mohr-Coulomb and Hoek-Brown failure criteria parameters depending on triaxial test results showed inverse change which does not let evaluate rock material strength. To achieve this goal, numerical modeling analyses were used. This allowed evaluating of intact rock triaxial strength by the effect of intact rock properties on the behavior of rock mass. Finally; it was found that moisture decreased the strength of marl rock material, and conditioning by moisture diffusion is an appropriate procedure for evaluating water sensitive rocks such as marl.