Investigation of Sn-Zn electrodeposition from acidic bath on EQCM

ARICI M., Nazir H., Aksu M. L.

JOURNAL OF ALLOYS AND COMPOUNDS, vol.509, no.5, pp.1534-1537, 2011 (SCI-Expanded) identifier identifier

  • Publication Type: Article / Article
  • Volume: 509 Issue: 5
  • Publication Date: 2011
  • Doi Number: 10.1016/j.jallcom.2010.10.161
  • Journal Indexes: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Page Numbers: pp.1534-1537
  • Keywords: Metals and alloys, Coating materials, Oxidation, SEM, Corrosion, CORROSION
  • Eskisehir Osmangazi University Affiliated: Yes


Tin-zinc (Sn-Zn) alloy with low tin content was deposited on gold electrode and steel substrate with use of chronoamperometric technique from an acidic bath. In order to evaluate coating efficiency of Sn-Zn alloy in 0.5 M NaCl solution, open circuit potential-time curve (E-OCP-t), polarization curves, mass change of the electrode (Delta m-t) using quartz crystal microbalance (QCM) were compared to those of pure Sn and Zn coatings. Anodic stripping measurements were carried out simultaneously with the mass loss of the deposit. Scanning electron microscopy (SEM) and energy dispersive X-ray spectra (EDS) analysis were performed to characterize the surface morphology. Anodic stripping experiment and EDS analysis indicated that Sn, Zn, and SnO2 formed on the electrode surface when Sn-Zn was coated from acidic bath. Furthermore, local mapping demonstrated homogeneous distribution of Sn and Zn atoms throughout the surface. (C) 2010 Elsevier B.V. All rights reserved.