X-ray photoelectron spectroscopy (XPS) and gamma-ray shielding investigation of boro-silicate glasses contained alkali/alkaline modifier


Kaky K. M., ŞAKAR E., Akbaba U., KASAPOĞLU A. E., Sayyed M. I., GÜR E., ...Daha Fazla

RESULTS IN PHYSICS, cilt.14, 2019 (SCI-Expanded) identifier identifier

  • Yayın Türü: Makale / Tam Makale
  • Cilt numarası: 14
  • Basım Tarihi: 2019
  • Doi Numarası: 10.1016/j.rinp.2019.102438
  • Dergi Adı: RESULTS IN PHYSICS
  • Derginin Tarandığı İndeksler: Science Citation Index Expanded (SCI-EXPANDED), Scopus
  • Anahtar Kelimeler: X-ray photoelectron spectroscopy, Borosilicate glasses, Radiation, Attenuation, BORATE GLASSES, ALUMINOSILICATE GLASSES, BOROSILICATE GLASS, PARAMETERS, FEATURES, BI2O3, SYSTEM, ALKALI, OXIDE
  • Eskişehir Osmangazi Üniversitesi Adresli: Hayır

Özet

In the present work, seven glass samples have been prepared utilizing melt-quenching method with composition of 40B(2)O(3)-10SiO(2)-10Al(2)O(3)-30ZnO-10 (Li2O/Na2O/K2O/MgO/CaO/SrO/BaO) all in mol%. Scanning electron microscope (SEM) and Energy-dispersive X-ray spectroscopy (EDX) have characterized for H3 (K2O) and H7 (BaO), to examine the structural properties. X-ray Photoelectron Spectroscopy (XPS) has shown that the boron (B) element composition is highest after oxygen elements in all the glasses. It has been also observed that incorporation of potassium (K) and strontium (Sr) elements are maximum compared to the other doped elements into the glass. Further, the photon shielding for H1-H7 samples were also studied. We calculated the mass attenuation coefficients (mu/rho) for the present samples at some energies between 0.015 and 10 MeV. The results revealed that H7 (BaO) sample owns the highest mu/rho values followed by H6 (SrO) while H1 (Li2O) has the lowest mu/rho. Moreover, H7 and H6 samples have higher effective atomic number than the rest of glasses. H7 sample has excellent shielding properties when compared with the other glasses. We found that the composition of the sample affects the attenuation of the glasses and high attenuation can be achieved when we used heavy metal oxides (such as BaO).