SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler
Tribological and mechanical behavior of AISI 316L lattice-supported structures produced by laser powder bed fusion
International Journal of Advanced Manufacturing Technology
, cilt.118, sa.5-6, ss.1733-1748, 2022 (SCI-Expanded)
Investigation of residual stresses by micro indentation in selective laser melting Lazerle metal toz ergitme prosesinde kalinti gerilmelerin mikro girinti tekniǧi ile incelenmesi
Journal of the Faculty of Engineering and Architecture of Gazi University
, cilt.36, sa.2, ss.1029-1039, 2021 (SCI-Expanded)
Thermal and molten pool model in selective laser melting process of Inconel 625
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY
, cilt.95, ss.3977-3984, 2018 (SCI-Expanded)
Investigation of laser and process parameters for Selective Laser Erosion
Precision Engineering-Journal Of The International Societies For Precision Engineering And Nanotechnology
, cilt.34, sa.1, ss.101-112, 2010 (SCI-Expanded)
Diğer Dergilerde Yayınlanan Makaleler
BENCHMARKING OF OPTICAL 3D MEASUREMENT SYSTEMS FORAEROSPACE APPLICATIONS
Mühendis ve Makina
, 2014 (Hakemli Dergi)
Benchmarking for Metal Additive Manufacturing
MSI Defence Review
, 2014 (Hakemli Dergi)
Overview of cryogenic cooling in machining of Ti alloys and a case study
Journal of Production Engineering
, cilt.15, sa.2, ss.1-9, 2012 (Hakemli Dergi)
Microstructure and mechanical properties of selective laser melted 18Ni-300 steel
Physics Procedia
, cilt.12, sa.1, ss.255-263, 2011 (Hakemli Dergi)
Charpy impact testing of metallic Selective Laser Melting parts
Virtual and Physical Prototyping
, cilt.5, sa.2, ss.89-98, 2010 (Scopus)
Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar
On the Use of Inherent Strain Method for Modelling Electron Beam Melting
EBAM 2020, 5 - 07 Ekim 2020
Selective Laser Melting Process Development for enhanced productivity with Ph 17-4 stainless steel
AMCTURKEY Additive Manufacturing Conference, İstanbul, Türkiye, 17 - 18 Ekim 2019
On the optimization of metal spatter sweeping in Selective Laser Melting
AMCTURKEY Additive Manufacturing Conference, İstanbul, Türkiye, 17 - 18 Ekim 2019
Characterization and Compression Testing of Double Gyroid Lattice Structures produced by Direct Metal Laser Sintering
AMCTURKEY Additive Manufacturing Conference, İstanbul, Türkiye, 17 - 18 Ekim 2019
Compressive Strength Testing and Characterization of Double Gyroid Lattice Structure Produced by Direct Metal Laser Melting
4th WORKSHOP ON METAL ADDITIVE MANUFACTURING, 27 - 28 Mayıs 2019
Understanding Adopting Selective Laser Melting of Metallic Materials
29th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, 13 - 15 Ağustos 2018
The enhancement of micromachining ability of Selective Laser Melting by Selective Laser Erosion,
International Conference Polymers and Moulds Innovations, GENT, Belçika, 19 Nisan 2007 - 20 Nisan 2017
Process limits of direct metal lasersintering (DMLS) in terms of minimum hole and boss diameters with varying aspect ratios
UMTIK (17thInternational Conference on Machine Design and Production) Conference, Bursa, Türkiye, 12 - 15 Temmuz 2016
Katmanlı İmalat Ve Talaşlı İmalatın Birlikte Uygulandığı Melez Üretim Sistemleri Üzerine
UTIS 6. Ulusal Talaşlı İmalat Sempozyumu, İstanbul, Türkiye, 5 - 07 Kasım 2015
Repair and Manufacturing of High Performance Tools byAdditive Manufacturing
8th International Conf. and Exhibition On Design and Production of Machines andDies/Molds, Aydın, Türkiye, 18 - 21 Haziran 2015
On Additive Manufacturing for Aviation/Space Applications
SASAD İleri Malzemeler ve Süreçler Çalıştayı, Türkiye, 2 - 03 Aralık 2014
Investigation of free-form surface reconstruction techniques for reverse engineering of worn-out gas turbine blades: a case study
The 16thInternational Conference on Machine Design and Production, İzmir, Türkiye, 30 Haziran - 03 Temmuz 2014
On Additive Manufacturing
7th International Powder Metallurgy Conference and Exhibition, Ankara, Türkiye, 24 - 28 Haziran 2014
Havacılık malzemelerinin atalet kaynağı yöntemi ilebirleştirilmesi
IV. Ulusal Talaşlı İmalat Sempozyumu, Türkiye, 7 - 09 Kasım 2013
Havacılık sektöründe optik ölçümyöntemlerinin yeri ve karşılaştırmalı değerlendirilmesi üzerine bir çalışma
VIII Ulusal Ölçümbilim Kongresi ve Sergisi, Kocaeli, Türkiye, 26 - 28 Eylül 2013
Parameter study for Selective Laser Erosion
4th InternationalConference and Exhibition on design and production of machines and dies/molds, İzmir, Türkiye, 21 Haziran 2007 - 23 Haziran 2013
Assessment of machinability performance in 5-axis milling of Inconel 718 alloy with different carbide grades
7thInternational Conference and Exhibition on Design and Production of Machines and Dies/Molds, Antalya, Türkiye, 20 - 23 Haziran 2013
A Review on the Improvements in Machinability of Ti-6Al-4V
10th Global Conference on Sustainable Manufacturing, İstanbul, Türkiye, 31 Ekim - 02 Kasım 2012
Overview of cryogenic cooling in machining of Ti alloys and a case study
3rdInt. Conf. on Sustainable Life in Manufacturing, 2 - 05 Ekim 2012
Improving productivity rate in SLM of commercial steel powders
RAPID 2009 Conference Exposition, Schaumburg, Amerika Birleşik Devletleri, 12 - 14 Mayıs 2009
Roughness improvement in Selective Laser Melting
Proc. of PMI 2008, 1 - 02 Eylül 2008
Consolidation of polymer powders by selective lasersintering
Proc. of PMI 2008, Gent, Belçika, 1 - 02 Eylül 2008
Experimental analysis of process and laser parameters in laser marking
Proc. of ASME ESDA 2008, Haifa, İsrail, 7 - 09 Temmuz 2008
Experimental study of the combined process of Selective Laser Melting and Selective Laser Erosion
Proc. of RAPID2008, Florida, Amerika Birleşik Devletleri, 20 - 22 Mayıs 2008
Kitap & Kitap Bölümleri
The investigation of the influence of laser re-melting on density, surface quality and microstructure of SLM parts
Emerald Gems: A Focus on SLM and SLS Methods in 3D Printing, , Editör, EMERALD GROUP, ss.23-50, 2015