Yayınlar & Eserler

Yayın Ağı
Makaleler 33
Tümü (33)
SCI-E, SSCI, AHCI (21)
SCI-E, SSCI, AHCI, ESCI (24)
ESCI (3)
Scopus (25)
TRDizin (3)
Diğer Yayınlar (6)

1. Thermal modeling of variable process parameter effects in powder bed fusion using electron beam

Kirim B., Söylemez E., Tan E., Yasa E.
Rapid Prototyping Journal , cilt.30, sa.10, ss.2097-2112, 2024 (SCI-Expanded) identifier

2. Effect of Heat Treatment and Hot Isostatic Pressing on the Corrosion Behavior of Ti6Al4 V Parts Produced by Electron Beam Melting Additive Manufacturing Technology

Karasoglu M., ÖTEYAKA M. Ö., YASA E., Tan E., KUŞHAN M. C.
ACS Omega , cilt.9, sa.27, ss.29904-29916, 2024 (SCI-Expanded) identifier identifier

3. Choosing between commercially pure titanium and Ti-6Al-4V gyroid structures for orthopedic applications: An analysis through Timoshenko beam theory, the Gibson-Ashby model and experimental methods

Depboylu F. N., Yasa E., Poyraz Ö., KORKUSUZ F., Popa A.
Materials Today Communications , cilt.39, 2024 (SCI-Expanded) identifier

4. Mechanical properties of laser powder bed fusion produced overhang parts with different support geometries: an experimental study

Gülcan O., Günaydın K., Çelik A., YASA E.
Progress in Additive Manufacturing , cilt.9, sa.2, ss.211-229, 2024 (ESCI) identifier identifier

5. Biomimetic dental implant production using selective laser powder bed fusion melting: In-vitro results

Onder M. E., Culhaoglu A., Ozgul O., Tekin U., Atıl F., Taze C., et al.
Journal of the Mechanical Behavior of Biomedical Materials , cilt.151, 2024 (SCI-Expanded) identifier identifier

6. Recent Inventions in Additive Manufacturing: Holistic Review

Fidan I., Huseynov O., Ali M. A., Alkunte S., Rajeshirke M., Gupta A., et al.
Inventions , cilt.8, sa.4, 2023 (ESCI) Creative Commons License identifier identifier

7. Thin-Walled Commercially Pure Titanium Structures: Laser Powder Bed Fusion Process Parameter Optimization

Depboylu F. N., YASA E., Poyraz O., KORKUSUZ F.
Machines , cilt.11, sa.2, 2023 (SCI-Expanded) Creative Commons License identifier identifier

8. Material-specific phenomena and developing higher yield process parameters in laser powder bed fusion of 17-4 PH stainless steel

YASA E., Atik İ., Kandemir İ.
Journal of the Brazilian Society of Mechanical Sciences and Engineering , cilt.45, sa.1, 2023 (SCI-Expanded) identifier identifier

9. Modeling of residual stress and distortion in direct metal laser sintering process: a fast prediction approach

Kundakcıoğlu E., Lazoglu I., Poyraz Ö., YASA E.
Production Engineering , cilt.16, sa.6, ss.769-783, 2022 (ESCI) identifier identifier

10. Optimization of Tooth Support Geometrical Parameters for Laser Powder Bed Fusion Produced Overhang Parts

Gulcan O., Gunaydin K., Celik A., YASA E.
JOURNAL OF TESTING AND EVALUATION , cilt.51, 2022 (SCI-Expanded) identifier identifier

11. Contact-Free Support Structures for the Direct Metal Laser Melting Process

Celik A., Tekoglu E., YASA E., Sönmez M. Ş.
MATERIALS , cilt.15, sa.11, 2022 (SCI-Expanded) Creative Commons License identifier identifier identifier

12. Titanium based bone implants production using laser powder bed fusion technology

Depboylu F. N., YASA E., Poyraz Ö., Minguella-Canela J., KORKUSUZ F., De los Santos López M. A.
Journal of Materials Research and Technology , cilt.17, ss.1408-1426, 2022 (SCI-Expanded) identifier identifier

13. Effect of thickness and build direction on the mechanical behavior and microstructure of AISI 316L stainless steel produced by Laser Beam Powder Bed Fusion

YASA E., Karasoglu M.
Kovove Materialy , cilt.60, sa.1, ss.55-65, 2022 (SCI-Expanded) Creative Commons License identifier identifier

14. Tribological and mechanical behavior of AISI 316L lattice-supported structures produced by laser powder bed fusion

YASA E., AY G. M., Türkseven A.
International Journal of Advanced Manufacturing Technology , cilt.118, sa.5-6, ss.1733-1748, 2022 (SCI-Expanded) identifier identifier

15. Microstructure and mechanical properties of hybrid additive manufactured dissimilar 17-4 PH and 316L stainless steels

Ozsoy A., Tureyen E. B., Baskan M., YASA E.
Materials Today Communications , cilt.28, 2021 (SCI-Expanded) identifier identifier

16. Pulsed-mode Selective Laser Melting of 17-4 PH stainless steel: Effect of laser parameters on density and mechanical properties

Ozsoy A., YASA E., Keles M., Tureyen E. B.
Journal of Manufacturing Processes , cilt.68, ss.910-922, 2021 (SCI-Expanded) identifier identifier

17. Investigation of residual stresses by micro indentation in selective laser melting Lazerle metal toz ergitme prosesinde kalinti gerilmelerin mikro girinti tekniǧi ile incelenmesi

YASA E., Poyraz Ö.
Journal of the Faculty of Engineering and Architecture of Gazi University , cilt.36, sa.2, ss.1029-1039, 2021 (SCI-Expanded) identifier identifier identifier

18. Additive Manufacturing in Land Vehicle Industry

Ersoy K., KOÇ B., YASA E.
American Journal of Biomedical Science and Research , 2019 (Hakemli Dergi) Creative Commons License

19. Dimensional Accuracy and Mechanical Properties of Chopped Carbon Reinforced Polymers Produced by Material Extrusion Additive Manufacturing

Yasa E., Ersoy K.
MATERIALS , cilt.12, sa.23, 2019 (SCI-Expanded) Creative Commons License identifier identifier identifier

20. Anisotropic impact toughness of chopped carbon fiber reinforced nylon fabricated by material extrusion-based additive manufacturing

YASA E.
Eskişehir Technical University Journal of Science and Technology A- Applied Sciences And Engineering , cilt.20, sa.2, ss.195-203, 2019 (Hakemli Dergi) Creative Commons License

21. Thermal and molten pool model in selective laser melting process of Inconel 625

Kundakcioglu E., Lazoglu I., Poyraz O., YASA E., Cizicioglu N.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.95, ss.3977-3984, 2018 (SCI-Expanded) identifier identifier

22. A Study on the Stair Stepping Effect in Direct Metal Laser Sintering of a Nickel-based Superalloy

YASA E., Poyraz Ö., Uğur Solakoğlu E., Akbulut G., Ören S.
Procedia CIRP , cilt.45, ss.175-178, 2016 (Hakemli Dergi)

23. BENCHMARKING OF OPTICAL 3D MEASUREMENT SYSTEMS FORAEROSPACE APPLICATIONS

ÖREN S., YASA E., UĞUR E., POYRAZ Ö., AKBULUT G., PİLATİN S.
Mühendis ve Makina , 2014 (Hakemli Dergi)

24. Benchmarking for Metal Additive Manufacturing

YASA E., POYRAZ Ö., YAĞMUR A., YILMAZ R., PİLATİN S.
MSI Defence Review , 2014 (Hakemli Dergi)

25. Assessing and comparing influencing factors of residual stresses in selective laser melting using a novel analysis method

Kruth J., Deckers J., Yasa E., Wauthle R.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE , cilt.226, ss.980-991, 2012 (SCI-Expanded) identifier identifier

26. Overview of cryogenic cooling in machining of Ti alloys and a case study

YASA E., Pilatin S., ÇOLAK O.
Journal of Production Engineering , cilt.15, sa.2, ss.1-9, 2012 (Hakemli Dergi)

27. Determination of geometrical factors in Layerwise Laser Melting using optical process monitoring

Craeghs T., Clijsters S., Yasa E., Bechmann F., Berumen S., Kruth J.
OPTICS AND LASERS IN ENGINEERING , cilt.49, sa.12, ss.1440-1446, 2011 (SCI-Expanded) identifier identifier

28. The investigation of the influence of laser re-melting on density, surface quality and microstructure of selective laser melting parts

Yasa E., Deckers J., Kruth J.
RAPID PROTOTYPING JOURNAL , cilt.17, sa.5, ss.312-327, 2011 (SCI-Expanded) identifier identifier

29. Manufacturing by combining Selective Laser Melting and Selective Laser Erosion/laser re-melting

Yasa E., Kruth J. -., Deckers J.
CIRP ANNALS-MANUFACTURING TECHNOLOGY , cilt.60, sa.1, ss.263-266, 2011 (SCI-Expanded) identifier identifier

30. Microstructure and mechanical properties of selective laser melted 18Ni-300 steel

KEMPEN K., YASA E., THIJS L., KRUTH J. P., VAN HUMBEECK J.
Physics Procedia , cilt.12, sa.1, ss.255-263, 2011 (Hakemli Dergi)

31. Microstructural investigation of Selective Laser Melting 316L stainless steel parts exposed to laser re-melting

YASA E., Kruth J. P.
Procedia Engineering (CIRP Conference on Surface Integrity (CSI) , cilt.19, ss.389-395, 2011 (Hakemli Dergi)

32. Charpy impact testing of metallic Selective Laser Melting parts

YASA E., Deckers J., Kruth J. P., Rombouts M., Luyten J.
Virtual and Physical Prototyping , cilt.5, sa.2, ss.89-98, 2010 (Scopus)

33. Investigation of laser and process parameters for Selective Laser Erosion

YASA E., Kruth J.
Precision Engineering-Journal Of The International Societies For Precision Engineering And Nanotechnology , cilt.34, sa.1, ss.101-112, 2010 (SCI-Expanded)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 39

1. Maksillofasiyal ve El Cerrahisi için Cp-Ti İmplantların Üretiminde Lazer Metal Toz Ergitme (LAM) Teknoloji Platformunun Geliştirilmesi

DEPBOYLU F. N., YASA E., KORKUSUZ F., POYRAZ Ö.
BİOMED 2021-TR, 18 Aralık 2021, (Özet Bildiri)

2. Parametric Simulations for Residual Stresses and Distortions of Inconel 625 Fabricated by Laser Powder Bed Fusion Additive Manufacturing

POYRAZ Ö., YASA E., TUNÇ L. T., KILIÇAY K.
AMC TURKEY 2021, İstanbul, Türkiye, 9 - 10 Eylül 2021, (Tam Metin Bildiri)

3. On the Z-Dimensional Accuracy of L-Powder Bed Fusion

YASA E., Kandemir İ., ATİK İ.
AMC TURKEY 2021, İstanbul, Türkiye, 09 Eylül 2021, (Tam Metin Bildiri)

4. The Selective Laser Melting Process Development of 17-4 PH Stainless Steels with Pulsed-wave Lasers

YASA E., ÖZSOY A., TÜREYEN E. B.
32. Annual Int. Virtual Solid Freeform Fabrication Synposium, Amerika Birleşik Devletleri, 2 - 04 Ağustos 2021, (Tam Metin Bildiri)

5. A Comparative and Experimental Study on the Effect of Heat Treatment Cycles for PBF Ti6Al4V

KARAŞOĞLU M., YASA E., TAN E., YAĞMUR A.
32. Annual Int. Virtual Solid Freeform Fabrication Synposium, Amerika Birleşik Devletleri, 2 - 04 Ağustos 2021, (Tam Metin Bildiri)

6. An Investigation on the Effect of Reuse and Recycling on Powder Characteristics in Electron Beam Melting

YASA E., KARAŞOĞLU M., TAN E., GÜMÜŞ B., SÖYLEMEZ E., AKTAŞ K.
IMMC 2021, Türkiye, 10 Haziran 2021, (Tam Metin Bildiri)

7. Biyomimetik Poröz Dental İmplant Tasarımı, İn-vivo ve İn-vitro Değerlendirilmesi: İn-vitro Ön Sonuçlar

ODABAŞI F., ÖNDER M. E., TEKİN U., ATIL F., ÇULHAOĞLU A. K., YASA E.
AÇBİD 14th International Online Congress, 07 Mayıs 2021, (Özet Bildiri)

8. On the Use of Inherent Strain Method for Modelling Electron Beam Melting

TAN E., YASA E., GÜMÜŞ B., SÖYLEMEZ E., AKTAŞ K.
EBAM 2020, 5 - 07 Ekim 2020, (Özet Bildiri)

9. Katmanlı İmalat Teknolojilerinin Truva Atı

YASA E.
Kaynak Teknolojisi XI. Ulusal Kongre ve Sergisi, Ankara, Türkiye, 15 - 16 Kasım 2019, (Özet Bildiri)

10. Selective Laser Melting Process Development for enhanced productivity with Ph 17-4 stainless steel

YASA E., Atik İ., Bayraktar İ.
AMCTURKEY Additive Manufacturing Conference, İstanbul, Türkiye, 17 - 18 Ekim 2019, (Özet Bildiri)

11. On the optimization of metal spatter sweeping in Selective Laser Melting

Gürkan A. Y., Bursa M., YASA E., Öğüt E.
AMCTURKEY Additive Manufacturing Conference, İstanbul, Türkiye, 17 - 18 Ekim 2019, (Özet Bildiri)

12. On the effect of unfixed process variables on mechanica properties in Selective Laser Melting

YASA E., Ersoy K., KOÇ B.
AMCTURKEY Additive Manufacturing Conference, İstanbul, Türkiye, 17 - 18 Ekim 2019, (Özet Bildiri)

13. Characterization and Compression Testing of Double Gyroid Lattice Structures produced by Direct Metal Laser Sintering

Kavas B., YASA E., SÖNMEZ M. Ş.
AMCTURKEY Additive Manufacturing Conference, İstanbul, Türkiye, 17 - 18 Ekim 2019, (Özet Bildiri)

14. Compressive Strength Testing and Characterization of Double Gyroid Lattice Structure Produced by Direct Metal Laser Melting

KAVAS B., YASA E., SÖNMEZ M. Ş.
4th WORKSHOP ON METAL ADDITIVE MANUFACTURING, 27 - 28 Mayıs 2019, (Özet Bildiri)

15. Understanding Adopting Selective Laser Melting of Metallic Materials

YASA E.
29th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, 13 - 15 Ağustos 2018, (Tam Metin Bildiri)

16. A Review on the Additive Manufacturing of Fiber Reinforced Polymer Matrix Composites

YASA E., Ersoy K.
29th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, 13 - 15 Ağustos 2018, (Tam Metin Bildiri)

17. Investigation of Support Structures for Direct MetalLaser Sintering (DMLS) of IN625 Parts,

Poyraz Ö., YASA E., Akbulut G., Orhangül A., Pilatin S.
Proc. of Solid Freeform Fabrication (SFF) Symposium, Austin, Amerika Birleşik Devletleri, 10 - 12 Ağustos 2015, (Tam Metin Bildiri)

18. A Technological And Business Perspective Of Additive Manufacturing For Defense Industry

Ersoy K., KOÇ B., YASA E.
18th INTERNATIONAL CONFERENCE ON MACHINE DESIGN ANDPRODUCTION, 3 - 06 Temmuz 2018, (Tam Metin Bildiri)

19. A CASE STUDY IN ADDITIVE MANUFACTURING OF LARGE METALLIC PARTS

YASA E., KOÇ B., ERSOY K.
Research and Development in Business and Education,in Prague November 14-16, 2017, Prague, Çek Cumhuriyeti, 14 - 16 Kasım 2017, (Özet Bildiri)

20. The enhancement of micromachining ability of Selective Laser Melting by Selective Laser Erosion,

Kruth J. P., YASA E., Vanparys M., Van Vaerenbergh J.
International Conference Polymers and Moulds Innovations, GENT, Belçika, 19 Nisan 2007 - 20 Nisan 2017, (Tam Metin Bildiri)

21. Process limits of direct metal lasersintering (DMLS) in terms of minimum hole and boss diameters with varying aspect ratios

Solakoğlu Uğur E., Yılmaz R., Ören S., Akbulut G., Poyraz Ö., YASA E.
UMTIK (17thInternational Conference on Machine Design and Production) Conference, Bursa, Türkiye, 12 - 15 Temmuz 2016, (Tam Metin Bildiri)

22. Katmanlı İmalat Ve Talaşlı İmalatın Birlikte Uygulandığı Melez Üretim Sistemleri Üzerine

POYRAZ Ö., YASA E., PİLATİN S.
UTIS 6. Ulusal Talaşlı İmalat Sempozyumu, İstanbul, Türkiye, 5 - 07 Kasım 2015, (Tam Metin Bildiri)

23. Repair and Manufacturing of High Performance Tools byAdditive Manufacturing

YASA E., Poyraz Ö., Cızıoğlu N., Pilatin S.
8th International Conf. and Exhibition On Design and Production of Machines andDies/Molds, Aydın, Türkiye, 18 - 21 Haziran 2015, (Tam Metin Bildiri)

24. On Additive Manufacturing for Aviation/Space Applications

YASA E.
SASAD İleri Malzemeler ve Süreçler Çalıştayı, Türkiye, 2 - 03 Aralık 2014, (Özet Bildiri)

25. Benchmarking of different powder-bed metal fusionprocesses for machine selection in additive manufacturing

YASA E., Demir F., Akbulut G., Cızıoğlu N., Pilatin S.
Proc. of Solid Freeform Fabrication (SFF)Symposium, Austin, Amerika Birleşik Devletleri, 4 - 06 Ağustos 2014, (Tam Metin Bildiri)

26. Investigation of free-form surface reconstruction techniques for reverse engineering of worn-out gas turbine blades: a case study

Poyraz Ö., Uğur Solakoğlu E., Demir F., YASA E., Pilatin S.
The 16thInternational Conference on Machine Design and Production, İzmir, Türkiye, 30 Haziran - 03 Temmuz 2014, (Tam Metin Bildiri)

27. On Additive Manufacturing

YASA E.
7th International Powder Metallurgy Conference and Exhibition, Ankara, Türkiye, 24 - 28 Haziran 2014, (Özet Bildiri)

28. Havacılık malzemelerinin atalet kaynağı yöntemi ilebirleştirilmesi

Cızıoğlu N., YASA E., Akbulut G., Pilatin S.
IV. Ulusal Talaşlı İmalat Sempozyumu, Türkiye, 7 - 09 Kasım 2013, (Tam Metin Bildiri)

29. Havacılık sektöründe optik ölçümyöntemlerinin yeri ve karşılaştırmalı değerlendirilmesi üzerine bir çalışma

YASA E., Ören S., Ezgi U., Poyraz Ö., Akbulut G.
VIII Ulusal Ölçümbilim Kongresi ve Sergisi, Kocaeli, Türkiye, 26 - 28 Eylül 2013, (Tam Metin Bildiri)

30. Parameter study for Selective Laser Erosion

Kruth J. P., YASA E., Van Vaerenbergh J.
4th InternationalConference and Exhibition on design and production of machines and dies/molds, İzmir, Türkiye, 21 Haziran 2007 - 23 Haziran 2013, (Tam Metin Bildiri)

31. Assessment of machinability performance in 5-axis milling of Inconel 718 alloy with different carbide grades

YASA E., Orhangül A., Songüler C., Pilatin S., Baytok E.
7thInternational Conference and Exhibition on Design and Production of Machines and Dies/Molds, Antalya, Türkiye, 20 - 23 Haziran 2013, (Tam Metin Bildiri)

32. A Review on the Improvements in Machinability of Ti-6Al-4V

YASA E., Alpağan U., Pilatin S., ÇOLAK O.
10th Global Conference on Sustainable Manufacturing, İstanbul, Türkiye, 31 Ekim - 02 Kasım 2012, (Tam Metin Bildiri)

33. Overview of cryogenic cooling in machining of Ti alloys and a case study

YASA E., Pilatin S., ÇOLAK O.
3rdInt. Conf. on Sustainable Life in Manufacturing, 2 - 05 Ekim 2012, (Tam Metin Bildiri)

34. Improving productivity rate in SLM of commercial steel powders

Badrossamay M., YASA E., Van Vaerenbergh J.
RAPID 2009 Conference Exposition, Schaumburg, Amerika Birleşik Devletleri, 12 - 14 Mayıs 2009, (Tam Metin Bildiri)

35. Roughness improvement in Selective Laser Melting

Kruth J. P., YASA E., Deckers J.
Proc. of PMI 2008, 1 - 02 Eylül 2008, (Tam Metin Bildiri)

36. Consolidation of polymer powders by selective lasersintering

Kruth J. P., Levy G., Schindel R., Craeghs T., YASA E.
Proc. of PMI 2008, Gent, Belçika, 1 - 02 Eylül 2008, (Tam Metin Bildiri)

37. Experimental investigation of laser surface re-melting for the improvement of Selective Laser Melting process

Kruth J. P., YASA E., Deckers J.
Proc. of Solid Freeform Fabrication (SFF) Symposium, Austin, Amerika Birleşik Devletleri, 4 - 06 Ağustos 2008, (Tam Metin Bildiri)

38. Experimental analysis of process and laser parameters in laser marking

Kruth J. P., YASA E.
Proc. of ASME ESDA 2008, Haifa, İsrail, 7 - 09 Temmuz 2008, (Tam Metin Bildiri)

39. Experimental study of the combined process of Selective Laser Melting and Selective Laser Erosion

YASA E., Kruth J. P.
Proc. of RAPID2008, Florida, Amerika Birleşik Devletleri, 20 - 22 Mayıs 2008, (Tam Metin Bildiri)
Kitaplar 8

1. Smart Bioceramics for Orthopedic Applications

YASA E., Depboylu F. N., KORKUSUZ P., KORKUSUZ F.
Innovative Bioceramics in Translational Medicine II, Choi A.H., Ben-Nissan B., Editör, Springer, ss.157-186, 2022

2. İskelet sisteminde kullanılan biyomalzemeler ve vücudun biyomalzemelere yanıtı

Depboylu F. N., KORKUSUZ P., YASA E., KORKUSUZ F.
Üst Ekstremite, Yaralanmalarında Rehabilitasyon, Tunay V, Erden Z, Yıldız C., Editör, Hipokrat Yayınevi, Ankara, ss.38-49, 2021

3. Chapter 3 - Selective laser melting: principles and surface quality

YASA E.
Handbooks in Advanced Manufacturing, Additive Manufacturing, Juan Pou, Antonio Riveiro, J. Paulo Davim, Editör, Elsevier, ss.77-120, 2021

4. Tasarım ve İmalat

Yasa E. (Editör)
Intech Open, London, 2020

5. Powder Bed Fusion Additive Manufacturing of Ni-Based Superalloys: Applications, Characteristics, and Limitations

YASA E., POYRAZ Ö.
Additive Manufacturing Applications for Metals and Composites, K.R. Balasubramanian, V. Senthilkumar, Editör, IGI Global, Pennsylvania, ss.249-270, 2020

6. Additive Manufacturing of Polymer Matrix Composites

Yasa E.
Uçak Teknolojisi (Aircraft Technology), Melih Kushan, Editör, Intech Open, London, ss.147-169, 2018

7. The investigation of the influence of laser re-melting on density, surface quality and microstructure of SLM parts

YASA E., Deckers J., Kruth J. P.
Emerald Gems: A Focus on SLM and SLS Methods in 3D Printing, , Editör, EMERALD GROUP, ss.23-50, 2015

8. Selective Laser Sintering/Melting and Selective Laser Erosion with Nd:YAG Lasers

YASA E., CRAEGHS T., KRUTH J. P.
Advances in Laser and Optics Research Vol.7, Arkin W., Editör, NOVA PUBLISHERS, Hauppauge NY, ss.1-64, 2012
Metrikler

Yayın

80

Yayın (WoS)

24

Yayın (Scopus)

25

Atıf (WoS)

684

H-İndeks (WoS)

7

Atıf (Scopus)

810

H-İndeks (Scopus)

7

Atıf (Diğer Toplam)

11

Proje

5

Tez Danışmanlığı

1

Açık Erişim

7
BM Sürdürülebilir Kalkınma Amaçları