Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Isı Transferi Problemi için Sabit Modelli Çoklu Ağ Şemalarının Değerlendirilmesi

TEKÇE M. S., GÜLEREN K. M.
Isı Bilimi ve Tekniği Dergisi , cilt.44, sa.2, ss.322-338, 2024 (SCI-Expanded) identifier

DÖNEN PATLAMA MOTORLARINDAKİ OLUŞAN DALGA YAPISININ SAYISAL OLARAK İNCELENMESİ

KOCAASLAN O., GÜLEREN K. M., SARACOĞLU B. H., YASA T.
Isı Bilimi ve Tekniği Dergisi , cilt.44, sa.1, ss.33-45, 2024 (SCI-Expanded) Creative Commons License identifier

A study on required grid resolution for large eddy simulation analyses Büyük girdap benzetimi analizleri için gerekli ağ çözünürlüğü üzerine bir çalışma

GÜLEREN K. M.
Journal of the Faculty of Engineering and Architecture of Gazi University , cilt.39, sa.4, ss.2209-2221, 2024 (SCI-Expanded) identifier

A PARAMETRIC STUDY ON THE SWIRLER FOR TURBULENT COMBUSTION

Kocaaslan O., Yasa T., Guleren K. M.
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , cilt.41, sa.2, ss.205-226, 2021 (SCI-Expanded) identifier identifier identifier

Numerical Analysis of the Cavity Flow subjected to Passive Controls Techniques

GÜLEREN K. M., TÜRK S., Demircan O. M., Demir O.
IOP CONFERENCE SERIES: MATERIALS SCIENCE AND ENGINEERING , cilt.326, sa.012015, 2018 (SCI-Expanded) identifier identifier

Automatic optimization of a centrifugal pump based on impeller-diffuser interaction

Guleren K. M.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART A-JOURNAL OF POWER AND ENERGY , cilt.232, sa.8, ss.1004-1018, 2018 (SCI-Expanded) identifier identifier

OPERATING TEMPERATURES OF THE SOLAR CELLS USED IN THE CONCENTRATOR SYSTEM WITH RADIATING PLATES

Sengil N., Guleren K. M., Sengil U.
ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , cilt.36, sa.2, ss.83-91, 2016 (SCI-Expanded) identifier identifier

Numerical identification of blade exit angle effect on the performance for a multistage centrifugal pump impeller

BABAYİĞİT O., KOCAASLAN O., AKSOY M. H., GÜLEREN K. M., ÖZGÖREN M.
EPJ WEB OF CONFERENCES , cilt.92, 2015 (SCI-Expanded) Sürdürülebilir Kalkınma identifier identifier

Numerical flow analysis of coronary arteries through concentric and eccentric stenosed geometries

GÜLEREN K. M.
JOURNAL OF BIOMECHANICS , cilt.46, sa.6, ss.1043-1052, 2013 (SCI-Expanded) identifier identifier identifier

Numerical study of the turbulent flow in strongly curved stationary and rotating U-ducts

GÜLEREN K. M.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS , cilt.64, sa.1, ss.23-43, 2010 (SCI-Expanded) identifier identifier

Laminarization of internal flows under the combined effect of strong curvature and rotation

GÜLEREN K. M., Afgan I., Turan A.
JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME , cilt.130, sa.9, 2008 (SCI-Expanded) identifier identifier

Measurements of Reynolds stresses in centrifugal compressor vaned diffusers

PINARBAŞI A., GÜLEREN K. M., ÖZTÜRK A.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , cilt.222, sa.8, ss.1487-1503, 2008 (SCI-Expanded) identifier identifier

Validation of large-eddy simulation of strongly curved stationary and rotating U-duct flows

GÜLEREN K. M., Turan A.
INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW , cilt.28, sa.5, ss.909-921, 2007 (SCI-Expanded) identifier identifier

Numerical simulation of the stalled flow within a vaned centrifugal pump

GÜLEREN K. M., PINARBAŞI A.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , cilt.218, sa.4, ss.425-435, 2004 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Centrifugal Pump Optimization via Integration of Machine Learning and Computational Fluid Dynamics

Rabbani S., GÜLEREN K. M., Afgan I.
Engineered Science , cilt.30, 2024 (Scopus) identifier

A NUMERICAL STUDY ON THE CONTROL OF THE FLOW IN AN AXISYMMETRIC SUDDEN EXPANSION

GÜLEREN K. M.
Anadolu Üniversitesi Bilim ve Teknoloji Dergisi :A-Uygulamalı Bilimler ve Mühendislik , cilt.18, ss.1, 2017 (Hakemli Dergi)

Türk Hava Kurumu Uçak Tasarımları

SÜLÜMBAZ M., GÜLEREN K. M.
Mühendis ve Makina , cilt.54, sa.638, ss.54-61, 2013 (Hakemli Dergi)

Avrupa Birliği ve Türkiye nin Rüzgâr Enerjisi Üretiminin Güncel Bir Analizi

KESKİN M. H., GÜLEREN K. M.
Mühendis ve Makina , cilt.54, sa.639, ss.57-68, 2013 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Adaptive Meshing Strategies for Steady Shock Wave at Transonic Regime

GÜMÜŞ M. A., GÜLEREN K. M.
11th ANKARA INTERNATIONAL AEROSPACE CONFERENCE, Ankara, Türkiye, 05 Eylül 2021

Noise reduction of Open Cavities by Passive Flow Control Methods at Transonic Speeds Using OpenFOAM

Demir O., ÇELİK B., GÜLEREN K. M.
31st International Conference on Parallel Computational Fluid Dynamics, Antalya, Türkiye, 14 - 17 Mayıs 2019

Aeroacoustics Analysis of Flaps and Spoilersfor High-Speed Open Cavity Flows

demircan o. m., demir o., TÜRK S., GÜLEREN K. M.
6th OpenFOAM Conference 2018, Almanya, 23 - 25 Ekim 2018

THE MODELING OF THE TURBULENT FLOW IN A GENERIC CONTRACTED ARTERY GEOMETRY

GÜLEREN K. M.
9TH INTERNATIONAL BIOMECHANICS CONGRESS, Eskişehir, Türkiye, 19 - 22 Eylül 2018

TURBULENT FLOW ANALYSIS IN AN IDEAL STENOSED RCA AND LAD MODEL

GÜLEREN K. M.
9 TH INTERNATIONAL BIOMECHANICS CONGRESS, Eskişehir, Türkiye, 19 - 22 Eylül 2018

Transonik Akışlarda Girdap Üreteçlerinin Kavite Gürültüsüne Etkisi

Demir O., ÇELİK B., GÜLEREN K. M.
7. Ulusal Havacılık ve Uzay Konferansı, Türkiye, 12 - 14 Eylül 2018

Aeroacustics Analysis of a Hybrid Control Method for the Flow-Induced Noise Generation of Transonic Cavity Flows

demircan o. m., demir o., TÜRK S., GÜLEREN K. M.
ICCFD 10 : 2018 International Conference on Computational Fluid Dynamics, İspanya, 9 - 13 Temmuz 2018

Supersonic CFD Analysis of a Mach 2.65 Mixed-Compression Axisymmetric Intake

BAŞIBÜYÜK A., KOCAASLAN O., GÜLEREN K. M.
International Conference on Applied Mathematics in Engineering (ICAME), 27 Haziran 2018 - 29 Haziran 2019

Numerical Investigation of the Wrap Angle Effect on Swirler Blade Combustion Performance

KOCAASLAN O., GÜLEREN K. M.
International Conference on Applied Mathematics in Engineering (ICAME), 27 - 29 Haziran 2018

Analysis of the NASA S-Duct Intake

KUTLUBAY İ. K., BABAYİĞİT O., GÜLEREN K. M.
International Conference on Applied Mathematics in Engineering (ICAME), 27 - 29 Haziran 2018

Supersonic CFD Analysis of a Mach 2.56 Mixed-Compression Axisymmetric Intake

BAŞIBÜYÜK A. C., KOCAASLAN O., GÜLEREN K. M.
International Conference on Applied Mathematics in Engineering, Balıkesir, Türkiye, 27 - 29 Haziran 2018

NUMERICAL INVESTIGATION OF THE EFFECT OF SWIRLER BLADE WRAP ANGLE ON COMBUSTION CHAMBER EFFICIENCY

KOCAASLAN O., GÜLEREN K. M.
International Conference on Applied Mathematics in Engineering (ICAME), Balıkesir, Türkiye, 27 - 29 Haziran 2018

Numerical Analysis of the Cavity Flow subjected to Passive Control Techniques

GÜLEREN K. M., TÜRK S., Demircan O. M., Demir O.
3rd International Conference on Mechanicaland Aeronautical Engineering, 13 - 16 Aralık 2017

Conceptual Design of an Annular Type Combustion Chamber

KOCAASLAN O., GÜLEREN K. M.
ICENTE 2017: International Conference on Engineering Technologies, 7 - 09 Aralık 2017

Kavite Akışlardaki Pasif Kontrol Yönteminin Sayısal Yöntemlerle Doğrulanması

TÜRK S., Demircan O. M., Demir O., GÜLEREN K. M.
21. Ulusal Isı Bilimi ve Tekniği Kongresi, Türkiye, 13 - 16 Eylül 2017

Validation of Open-Source Cfd Software For High Speed Turbulent Cavity Flows

Demircan O. M., Demir O., TÜRK S., GÜLEREN K. M.
AIAC 2017: 9th Ankara International Aerospace Conference, 20 - 22 Eylül 2017

Application of Analytic Network Process in Evaluating Initial Training Aircraft

AYAR M., Cavcar M., GÜLEREN K. M.
AIAC 2017: 9th Ankara International Aerospace Conference, 20 - 22 Eylül 2017

The Effect of Boundary Conditions on The Subsonic Turbulent Cavity Flows

Demir O., Demircan O. M., TÜRK S., GÜLEREN K. M.
ISSA 2017: International Symposium of Sustainable Aviation, 10 - 13 Eylül 2017

Bir İş Jeti Hava Taşıtının Sistem Mühendisliği Yaklaşımıyla Kavramsal Tasarımı

KUTAY Ç., GÜLEREN K. M.
6. Ulusal Havacılık ve Uzay Konferansı, Türkiye, 28 - 30 Eylül 2016

Thermal and Flow Field Analysis of Electronic Components Inside a Desktop Computer Chassis

ÇETİN K., GÜLEREN K. M.
Ninth International Conference onComputational Fluid Dynamics (ICCFD9), 11 - 15 Temmuz 2016 identifier

Solution of the Two Dimensional Steady State Heat Conduction using the Finite Volume Method

MORASATA R., GÜLEREN K. M.
Ninth International Conference onComputational Fluid Dynamics (ICCFD9), 11 - 15 Temmuz 2016 identifier

Aerodynamic Analysis Of The Flow Over A Tilt Rotor Aircraft

MORASATA R., GÜLEREN K. M.
The International Symposium on Sustainable Aviation 2016, 29 Mayıs - 01 Haziran 2016

A System Engineering Methodology Applied To The Design Of A Business Jet Aircraft

ÇETİN K., GÜLEREN K. M.
The International Symposium on Sustainable Aviation 2016, 29 Mayıs - 01 Haziran 2016

Aerodynamic Computational Fluid Dynamics Analysis of A Medium Altitude Long Endurance Unmanned Aerial Vehicle

DEMİRCAN O. M., GÜLEREN K. M.
The International Symposium on Sustainable Aviation 2016, 29 Mayıs - 01 Haziran 2016

Aerodynamic Cfd Analysis of A Jet Driven Fighter Aircraft

DEMİR O., GÜLEREN K. M.
The International Symposium on Sustainable Aviation 2016, 29 Mayıs - 01 Haziran 2016

Design of A Four Seat Civil Trainer Aircraft ISSA 2016 International Symposium of Sustainable Aviation

MORASATA R., GÜLEREN K. M.
The International Symposium on Sustainable Aviation 2016, 29 Mayıs - 01 Haziran 2016

Numerical identification of blade exit angle effect on the performance for a multistage centrifugal pump impeller

BABAYİĞİT O., KOCAASLAN O., AKSOY M. H., GÜLEREN K. M., ÖZGÖREN M.
9th International Conference on Experimental Fluid Mechanics, 18 - 21 Kasım 2014 Sürdürülebilir Kalkınma identifier identifier