Yayınlar & Eserler

Yayın Ağı
Makaleler 39
Tümü (39)
SCI-E, SSCI, AHCI (27)
SCI-E, SSCI, AHCI, ESCI (27)
Scopus (29)
TRDizin (6)
Diğer Yayınlar (4)

1. Influence of post heat treatment on tribological and microstructural properties of plasma wire arc additive manufactured maraging steels

Kaya E., Ulutan M., Çakır E., Buytoz S.
MATERIALS TESTING , cilt.66, sa.11, ss.1843-1854, 2024 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma identifier identifier

2. Corrosion behavior of SiC and FeCrC reinforced AISI 304 components fabricated by plasma wire arc additive manufacturing (P-WAAM)

Bayar İ., ÖTEYAKA M. Ö., Çakir E., ULUTAN M.
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture , cilt.238, sa.11, ss.1648-1657, 2024 (SCI-Expanded, Scopus) identifier identifier

3. Investigation of microstructure and mechanical properties of SiC and FeCrC reinforced components fabricated with plasma wire arc additive manufacturing (P-WAAM)

Bayar İ., ULUTAN M.
Materials Science and Engineering A , cilt.875, 2023 (SCI-Expanded, Scopus) identifier identifier

4. Tel Ark Katmanlı İmalat (TAKİ) Yöntemi ve Farklı Malzemelerde Mekanik Özelliklerinin İncelenmesi

ÇAKIR E., Ulutan M.
Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi , cilt.10, sa.1, ss.217-235, 2023 (Hakemli Dergi) Creative Commons License identifier

5. Nano WC Kompozitlerde Fe-Ni Oranın Mikroyapı ve Mekanik Özelliklere Etkisi

KAYA E., ULUTAN M.
Mühendislik Bilimleri ve Tasarım Dergisi , cilt.11, sa.1, ss.376-393, 2023 (TRDizin) identifier

6. Tribomechanical and microstructural properties of cathodic arc-deposited ternary nitride coatings

KAYA E., ULUTAN M.
Ceramics International , cilt.48, ss.21305-21316, 2022 (SCI-Expanded, Scopus) identifier identifier

7. The Effects of Different Heat Treatment and Coating Techniques on X120CrMo29-2 Martensitic Stainless Steel

KAYA E., ULUTAN M., Akbulut A.
Journal of Scientific Reports-A , cilt.49, sa.2, ss.62-73, 2022 (TRDizin) identifier

8. The evaluation Of The Non-Toxic Ferrous Matrix Based WC Reinforced Composites: A Review

KAYA E., ULUTAN M.
Celal Bayar Üniversitesi Fen Bilimleri Dergisi , cilt.18, sa.2, ss.129-139, 2022 (TRDizin) identifier

9. Lubricity assessment of ultra-low sulfur diesel fuel (ULSD), biodiesel, and their blends, in conjunction with pure hydrocarbons and biodiesel based compounds

Tat M. E., Çelik O. N., Er Ü., Gaşan H., Ulutan M.
International Journal of Engine Research , cilt.23, sa.2, ss.214-231, 2022 (SCI-Expanded, Scopus) Creative Commons License Sürdürülebilir Kalkınma identifier identifier

10. Investigation Of Tribological And Mechanical Performance Of Cryogenic Treated Medium Carbon Steel, 38mnvs6

KAYA E., ULUTAN M., KILIÇAY K., BAYAR İ.
Journal Of The Balkan Tribological Association , cilt.617, sa.627, ss.26-4, 2020 (Scopus) identifier

11. Enhancement on the Tool Steel's Surface Properties by Eta Carbide Distribution Mechanism of Cryogenic Treatment

KAYA E., KILIÇAY K., ULUTAN M.
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS , cilt.73, sa.10, ss.2673-2682, 2020 (SCI-Expanded, Scopus) identifier identifier

12. Microstructure and Tribological Properties of Tool Steel AISI O2 After Thorough Cryogenic Heat Treatment

KAYA E., KILIÇAY K., ULUTAN M.
METAL SCIENCE AND HEAT TREATMENT , cilt.62, ss.399-404, 2020 (SCI-Expanded, Scopus) identifier identifier

13. Microstructural and tribological properties of induction cladded NiCrBSi/WC composite coatings

KILIÇAY K., BUYTOZ S., ULUTAN M.
SURFACE & COATINGS TECHNOLOGY , cilt.397, 2020 (SCI-Expanded, Scopus) identifier identifier

14. Microstructure and Wear Properties of Hot-Pressed NiCrBSi/TiC Composite Materials

Islak S., Ulutan M., Buytoz S.
RUSSIAN JOURNAL OF NON-FERROUS METALS , cilt.61, sa.5, ss.571-582, 2020 (SCI-Expanded, Scopus) identifier identifier

15. Experimental study on Tribological Performance of SIC Composite Coating Layers

KILIÇAY K., ULUTAN M., KAYA E., BAYAR İ.
Journal Of The Balkan Tribological Association , cilt.26, sa.2, ss.390-400, 2020 (Scopus) identifier

16. Effects of Al on the Phase Volume Fractions and Wear Properties in the AlxCoCrFeMoNi High Entropy Alloy System

Gaşan H., Lökçü E., Ozcan A., Çelik O. N., Çelikyürek İ., Ulutan M., et al.
METALS AND MATERIALS INTERNATIONAL , cilt.26, sa.3, ss.310-320, 2020 (SCI-Expanded, Scopus) identifier identifier

17. Surface modification of atmospheric plasma sprayed cermet coatings by plasma transferred arc method

BAYAR İ., ULUTAN M.
TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING , cilt.97, sa.6, ss.298-304, 2019 (SCI-Expanded, Scopus) identifier identifier

18. Effect of cryogenic treatment on the microstructure and the wear behavior of WC-Co end mills for machining of Ti6Al4V titanium alloy

Çelik O. N., Sert A., Gaşan H., Ulutan M.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.95, ss.2989-2999, 2018 (SCI-Expanded, Scopus) identifier identifier

19. Tribological and Mechanical Properties of Deep Cryogenically Treated Medium Carbon Micro Alloy Steel

KAYA E., ULUTAN M.
METALS AND MATERIALS INTERNATIONAL , cilt.23, sa.4, ss.691-698, 2017 (SCI-Expanded, Scopus) identifier identifier

20. Effect of cryogenic treatment on tribological behaviour of TiC composite coatings

KILIÇAY K., ULUTAN M.
SURFACE ENGINEERING , cilt.33, sa.12, ss.886-894, 2017 (SCI-Expanded, Scopus) identifier identifier

21. Microstructure and wear behaviour of plasma transferred arc (PTA)-deposited FeCrC composite coatings on AISI 5115 steel

Ulutan M., KILIÇAY K., Celik O. N., ER Ü.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , cilt.236, ss.26-34, 2016 (SCI-Expanded, Scopus) identifier identifier

22. Plasma transferred arc surface modification of atmospheric plasma sprayed ceramic coatings

ULUTAN M., KILIÇAY K., KAYA E., BAYAR İ.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , cilt.30, sa.8, ss.3813-3818, 2016 (SCI-Expanded, Scopus) identifier identifier

23. Investigation of the solid lubrication effect of commercial boron-based compounds in end milling

KILIÇAY K., Ulutan M.
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING , cilt.17, sa.4, ss.517-524, 2016 (SCI-Expanded, Scopus) identifier identifier

24. ADHESIVE WEAR BEHAVIOR OF TIN AND CRNCOATED DIN115CRV3 STEEL TOOLS AT DIFFERENT LOAD CONDITIONS

ÖTEYAKA M. Ö., Yıldırım M. M., ULUTAN M., ÇELİK O. N.
International Journal of Advances in Mechanical and Civil Engineering , cilt.2, sa.5, ss.1-4, 2015 (Hakemli Dergi)

25. FRICTION AND WEAR BEHAVIOUR OF BORIDED AISI 304 STAINLESS STEEL WITH NANO PARTICLE AND MICRO PARTICLE SIZE OF BORIDING AGENTS

Gunen A., Ulutan M., Gok M. S., Kurt B., Orhan N.
JOURNAL OF THE BALKAN TRIBOLOGICAL ASSOCIATION , cilt.20, sa.3, ss.362-379, 2014 (SCI-Expanded, Scopus) identifier identifier

26. Microstructural and Wear Characteristics of High Velocity Oxygen Fuel (HVOF) Sprayed NiCrBSi-SiC Composite Coating on SAE 1030 Steel

BUYTOZ S., ULUTAN M., ISLAK S., Kurt B., ÇELİK O. N.
ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.38, sa.6, ss.1481-1491, 2013 (SCI-Expanded, Scopus) identifier identifier

27. Effects of graphite content on the microstructure and wear properties of an AISI 8620 steel surface modified by tungsten inert gas (TIC)

ÇELİK O. N., ULUTAN M., GAŞAN H., ER Ü., BUYTOZ S.
SURFACE & COATINGS TECHNOLOGY , cilt.206, sa.6, ss.1423-1429, 2011 (SCI-Expanded, Scopus) identifier identifier

28. Amerika Birleşik Devletlerin de Makine Mühendisliği Eğitimi

ALTUN Ö., TİMURALP Ç., YILMAZ S., ULUTAN M.
Mühendis ve Makine , cilt.52, sa.621, ss.36-42, 2011 (Hakemli Dergi)

29. Microstructure and Wear Behavior of TIG Surface-Alloyed AISI 4140 Steel

ULUTAN M., YILDIRIM M. M., BUYTOZ S., ÇELİK O. N.
TRIBOLOGY TRANSACTIONS , cilt.54, sa.1, ss.67-79, 2011 (SCI-Expanded, Scopus) identifier identifier

30. Tribological Properties of Borided AISI 4140 Steel with the Powder Pack-Boriding Method

ULUTAN M., YILDIRIM M. M., ÇELİK O. N., BUYTOZ S.
TRIBOLOGY LETTERS , cilt.38, sa.3, ss.231-239, 2010 (SCI-Expanded, Scopus) identifier identifier

31. Effect of Different Surface Treatment Methods on the Friction and Wear Behavior of AISI 4140 Steel

ULUTAN M., ÇELİK O. N., GAŞAN H., ER Ü.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY , cilt.26, sa.3, ss.251-257, 2010 (SCI-Expanded, Scopus) identifier identifier

32. Plazma transferli ark kaynak yüzey işlemiyle AISI 304 paslanmaz çelik yüzeyine WC Ni B4C kompozit kaplamasının mikroyapısal karakteristiği

BUYTOZ S., ULUTAN M., KURT B., ISLAK S., SOMUNKIRAN İ.
E-Journal of New World Sciences Academy , cilt.5, sa.1, ss.35-47, 2010 (Hakemli Dergi)

33. Interfacial Microstructure of Diffusion Bonded Inconel 738 and Ferritic Stainless Steel Couple

Kurt B., ULUTAN M.
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY , cilt.25, sa.4, ss.527-530, 2009 (SCI-Expanded, Scopus) identifier identifier

34. TIG yöntemiyle yüzeyi sertleştirilen AISI 4140 çeliğinin mikroyapı incelemesi

ULUTAN M., YILDIRIM M. M., BUYTOZ S.
Eskişehir Osmangazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi , cilt.22, sa.1, ss.93-108, 2009 (Hakemli Dergi)

35. Microstructural changes to SiC coated metallic surfaces produced by the TIG welding process on a 45Mn5 steel

Yildirim M. M., Buytoz S., Ulutan M.
PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY , cilt.44, sa.2, ss.59-69, 2007 (SCI-Expanded, Scopus) identifier identifier

36. In situ synthesis of SiC reinforced MMC surface on AISI 304 stainless steel by TIG surface alloying

Buytoz S., Ulutan M.
SURFACE & COATINGS TECHNOLOGY , cilt.200, ss.3698-3704, 2006 (SCI-Expanded, Scopus) identifier identifier

37. Dry sliding wear behavior of TIG welding clad WC composite coatings

Buytoz S., Ulutan M., Yildirim M.
APPLIED SURFACE SCIENCE , cilt.252, sa.5, ss.1313-1323, 2005 (SCI-Expanded, Scopus) identifier identifier

38. TIG yöntemiyle yapılan WC ile yüzey sertleştirme işleminin abrasiv aşınma performansının incelenmesi

YILDIRIM M. M., BUYTOZ S., ULUTAN M.
Doğu Anadolu Bölgesi Araştırmaları , cilt.3, sa.2, ss.38-44, 2005 (Hakemli Dergi) Sürdürülebilir Kalkınma

39. TIG yöntemiyle yüzeyi sertleştirilen AISI 4340 çeliğinin mikroyapısının incelenmesi

BUYTOZ S., ULUTAN M., YILDIRIM M. M.
Osmangazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi , cilt.18, sa.1, ss.44-60, 2005 (Hakemli Dergi)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 24

1. INFLUENCE OF CRYOGENIC HEAT TREATMENT ON PERFORMANCE OF UNCOATED, ALCRN AND ALTIN CARBIDE CUTTING TOOLS IN MILLING OF TI6AL4V

Demircan Y., Gemici S., SERT A., ULUTAN M., GAŞAN H.
6th International Conference on Advances in Mechanical Engineering, İstanbul, Türkiye, 20 Ekim 2021, ss.1541-1553, (Tam Metin Bildiri)

2. Selection of Process Parameters on Wire Arc AdditiveManufacturing Waam of TI6AL4V

ÇAKIR E., BAYAR İ., ULUTAN M.
4th International Conference on Engineering Technologies, ICENTE, Konya, Türkiye, 19 - 21 Kasım 2020, ss.350-354, (Tam Metin Bildiri)

3. Tel Ark Katmanlı İmalat (TAKİ) Yötemi, Türkçe İsimlendirmeleri ve Farklı Malzemelerde Uygulamaları

ÇAKIR E., BAYAR İ., ULUTAN M.
5. International Conference on Material Science and Technology in Cappadocia/TURKEY(IMSTEC 2020), Nevşehir, Türkiye, 16 - 18 Ekim 2020, ss.160-165, (Tam Metin Bildiri)

4. Determination of Wire Arc Additive Manufacturing Parameters with Plasma Arc Welding

BAYAR İ., ÇAKIR E., ULUTAN M.
5. International Conference on Material Science and Technology in Cappadocia/TURKEY (IMSTEC 2020), Nevşehir, Türkiye, 16 - 18 Ekim 2020, ss.105-107, (Tam Metin Bildiri)

5. MICROSTRUCTURAL INVESTIGATES OF Ni-BASED COMPOSITENi-ESASLI KOMPOZITIN MIKROYAPISAL INCELENMESI

BUYTOZ S., ULUTAN M., Nevruz A.
The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia/TURKEY (IMSMATEC’19), 21 - 23 Mayıs 2019, (Tam Metin Bildiri)

6. Rene 65 Süper Alaşımının Delik Delme Işleminde FarklıParametrelerin Taguchi Yöntemiyle Analizi

BİLGİÇ F., ER Ü., ULUTAN M.
18. Uluslararası Makina Tasarım ve İmalat Kongresi, 3 - 06 Haziran 2018, ss.973-988, (Tam Metin Bildiri)

7. Experimental Investigation of Different Hard Carbide Layers Coated by Flame Spray Technic on 90MnCrV8

KILIÇAY K., BAYAR İ., KAYA E., ULUTAN M.
The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, İzmir, Turkey, İzmir, Türkiye, 10 - 12 Nisan 2018, (Özet Bildiri)

8. Effect of Different Heat Inputs on Microstructure and Hardness in PTA Layers

KILIÇAY K., BAYAR İ., KAYA E., ULUTAN M.
The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, İzmir, Turkey, İzmir, Türkiye, 10 - 12 Nisan 2018, (Özet Bildiri)

9. A Comparative Study of Quantitative Image Analyze and X-Ray Diffraction Methods for Carbide Amount in composite coatings on steel

KILIÇAY K., KAYA E., BAYAR İ., ULUTAN M.
1st International Symposium On Innovative Approches In Scientific Studies, Antalya, Turkey, Antalya, Türkiye, 11 - 13 Nisan 2018, (Özet Bildiri)

10. Numerical and Analytical Analysis of Hertz Contact Pressure in ASTM G99 Wear Test

KAYA E., KILIÇAY K., ULUTAN M.
1st International Symposium On Innovative Approches In Scientific Studies, Antalya, Turkey, Antalya, Türkiye, 11 - 13 Nisan 2018, (Özet Bildiri)

11. Precise Measurement of Wear Rate Method for ASTM G-99 Wear Test

KAYA E., KILIÇAY K., BAYAR İ., ULUTAN M.
1st International Symposium On Innovative Approches In Scientific Studies, Antalya, Turkey, Antalya, Türkiye, 11 - 13 Nisan 2018, (Özet Bildiri)

12. Investigation of Microstructure and Tribological Properties of Molybdenum Coatings

BAYAR İ., ULUTAN M., KILIÇAY K., KAYA E.
International Congress On Applied Science And technology, Astech’2017, Malaga, Spain, Malaga, İspanya, 17 - 20 Nisan 2017, (Özet Bildiri)

13. Investigation of Process Parameters of AISI 304 Fiber Cut with Fiber Laser

BAYAR İ., KILIÇAY K., KAYA E., ULUTAN M., AKMAN D.
International Congress On Applied Science And technology, Astech’2017, Malaga, Spain, Malaga, İspanya, 17 - 20 Nisan 2017, (Özet Bildiri)

14. Effect of Ti addition on microstructure and Hardness of Al1.5CoCr FeMoNi high entropy alloys

GAŞAN H., LÖKÇÜ E., ÇELİK O. N., Özcan A., ÇELİKYÜREK İ., ULUTAN M.
METAL 2017 26. International conference on Metallurgy and Materials, Brno, Çek Cumhuriyeti, 24 - 26 Mayıs 2017, ss.79, (Özet Bildiri)

15. Experimental Study on Tribological Performance of SiC Composite Coating Layers

KILIÇAY K., ULUTAN M., KAYA E., BAYAR İ.
3rd International Iron Steel Symposium (UDCS’17), Karabük, Turkey, Karabük, Türkiye, 3 - 05 Nisan 2017, (Tam Metin Bildiri)

16. Investigation of Tribological and Mechanical Performance of Cryogenic Treated Medium Carbon Steel, 38MnVS6

KAYA E., ULUTAN M., KILIÇAY K., BAYAR İ.
3rd International Iron and Steel Symposium (UDCS’17), Karabük, Turkey, Karabük, Türkiye, 3 - 05 Nisan 2017, ss.460-464, (Tam Metin Bildiri)

17. Effect of Mo Content on Structure and Wear Behavior of AlCoCrFeMoxNi x 0 5 1 0 High Entropy Alloys

GAŞAN H., LÖKÇÜ E., özcan a., ÇELİK O. N., ÇELİKYÜREK İ., ULUTAN M., et al.
25th International Conference on Metallurgy and Materials, Bruno, Çek Cumhuriyeti, 25 - 27 Mayıs 2016

18. EFFECT OF AUSTENITIZATION TEMPERATURE ON TRIBOLOGICAL BEHAVIOUR OF MICRO ALLOYED STEEL

ULUTAN M., KILIÇAY K., KAYA E.
International Conference on Material Science and Technology in Cappadocia(IMSTEC 2016), 6 - 08 Nisan 2016, (Tam Metin Bildiri)

19. ADHESIVE WEAR BEHAVIOR OF TIN AND CRNCOATED DIN115CRV3 STEEL TOOLS AT DIFFERENT LOAD CONDITIONS

ÖTEYAKA M. Ö., YILDIRIM M. M., ULUTAN M., ÇELİK O. N.
Proceedings of 8th ISERD International Conference, İstanbul, Türkiye, 9 - 11 Ağustos 2015, ss.69-72, (Tam Metin Bildiri)

20. Adhesive Wear Behavior of TiN and CrN Coaated DIN 115 CrV 3 Steel Tools at Different Load Conditions

ÖTEYAKA M. Ö., YILDIRIM M. M., ULUTAN M., ÇELİK O. N.
International Conference on Chemical and Biochemical Engineering, 09 Ağustos 2015, (Tam Metin Bildiri)

21. Investigation of Lubrication and Wear Properties of Biodiesel and Diesel Fuels on Fuel Pump Material

TAT M. E., ÇELİK O. N., KNOTHE G., ER Ü., GAŞAN H., ULUTAN M.
World Conference on Oilseed Processing, Fats & Oils Processing, Biofuels & Applications, İzmir, Türkiye, 21 - 23 Haziran 2011

22. Effect of Lubrication and Wear Properties of Biodiesel added Ultra Low Sulfur Diesel (ULSD) Fuel on Common Rail Fuel Injection Pump Material

TAT M. E., ÇELİK O. N., KNOTHE G., ER Ü., GAŞAN H., ULUTAN M.
World Conference on Oilseed Processing, Fats & Oils Processing, Biofuels & Applications, İzmir, Türkiye, 21 - 23 Haziran 2011, ss.34, (Özet Bildiri)

23. TIG Yöntemiyle Yüzey Özellikleri Değiştirilen AISI 8620 Çeliğinin Adhesif Aşınma Özelliklerinin İncelenmesi

ÇELİK O. N., ULUTAN M., BUYTOZ S., GAŞAN H., ER Ü.
13th International Materials Symposium IMSP'2010, Denizli, Türkiye, 13 - 15 Ekim 2010, ss.1504-1511, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

24. An investigation on fatigue life of borided AISI 1010 steel

ÇELİK O. N., GAŞAN H., ULUTAN M., MURAT S.
Proceedings of 12th International Materials Symposium(IMSP'2008), Denizli, Türkiye, 15 - 17 Ekim 2008, ss.123-130, (Tam Metin Bildiri)
Metrikler

Yayın

63

Yayın (WoS)

27

Yayın (Scopus)

29

Atıf (WoS)

711

H-İndeks (WoS)

14

Atıf (Scopus)

812

H-İndeks (Scopus)

15

Atıf (Scholar)

57

H-İndeks (Scholar)

4

Atıf (Sobiad)

6

Atıf (Diğer Toplam)

2

Proje

15

Fikri Mülkiyet

1

Tez Danışmanlığı

16

Açık Erişim

1
BM Sürdürülebilir Kalkınma Amaçları