Prof. Dr. BERNA ULUTAŞ

JOURNAL OF INTELLIGENT MANUFACTURING , cilt.30, ss.2835-2852, 2019 (SCI-Expanded)

ASSESSING OCCUPATIONAL RISK FACTORS FOR FORKLIFT DRIVERS

Ulutaş B., Özkan N. F.

TRAVAIL HUMAIN , cilt.82, sa.2, ss.129-149, 2019 (SCI-Expanded)

Evaluation of brain computer interface usage in terms of cognitive load: a pilot study

Kahya E., Özkan N. F., Ulutaş B.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.34, sa.2, ss.648-662, 2019 (SCI-Expanded)

Efficiency analysis of cement manufacturing facilities in Turkey considering undesirable outputs

Ulutaş B., Kulturel-Konak S.

JOURNAL OF CLEANER PRODUCTION , cilt.156, ss.932-938, 2017 (SCI-Expanded)

A new methodology to cluster derivative product modules: an application

Aydin M., Ulutaş B.

INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH , cilt.54, sa.23, ss.7091-7099, 2016 (SCI-Expanded)

Dynamic facility layout problem in footwear industry

Ulutaş B., Islier A. A.

JOURNAL OF MANUFACTURING SYSTEMS , cilt.36, ss.55-61, 2015 (SCI-Expanded)

Assessing hypermutation operators of a clonal selection algorithm for the unequal area facility layout problem

ENGINEERING OPTIMIZATION , cilt.45, sa.3, ss.375-395, 2013 (SCI-Expanded)

An artificial immune system based algorithm to solve unequal area facility layout problem

Ulutaş B., Kulturel-Konak S.

EXPERT SYSTEMS WITH APPLICATIONS , cilt.39, ss.5384-5395, 2012 (SCI-Expanded)

A review of clonal selection algorithm and its applications

Ulutaş B., Kulturel-Konak S.

ARTIFICIAL INTELLIGENCE REVIEW , cilt.36, sa.2, ss.117-138, 2011 (SCI-Expanded)

A methodology to design virtual cellular manufacturing systems

Khilwani N., Ulutaş B., Islier A. A., Tiwari M. K.

JOURNAL OF INTELLIGENT MANUFACTURING , cilt.22, sa.4, ss.533-544, 2011 (SCI-Expanded)

A novel attribute-based dynamic content area layout for internet newspapers

Ulutaş B., Islier A. A.

INTERNET RESEARCH , cilt.20, sa.2, ss.135-153, 2010 (SCI-Expanded)

A clonal selection algorithm for dynamic facility layout problems

Ulutaş B., Islier A. A.

JOURNAL OF MANUFACTURING SYSTEMS , cilt.28, ss.123-131, 2009 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

ASSESSING THE UNIVERSITY ON-CAMPUS TRANSPORT MODES: A PRELIMINARY STUDY

Keleş F., Özgül H., Haktanirlar Ulutas B.

Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online) , cilt.32, sa.1, ss.1118-1129, 2024 (Hakemli Dergi)

Using Problem-Based Learning (PBL) in an Undergraduate Ergonomics Course

Journal of Problem Based Learning in Higher Education , cilt.11, ss.90-104, 2023 (Scopus)

Assessing the efficiency of airports by considering health and safety issues: A pilot study for Turkey

USTAEL B., ULUTAŞ B.

JOURNAL OF AIRLINE AND AIRPORT MANAGEMENT , cilt.12, sa.2, ss.49-68, 2022 (Hakemli Dergi)

Teaching and assessing strategies for an undergraduate manufacturing processes course: Experiences of 9 years

ÖZKAN N. F., ULUTAŞ B., YETKİN B. N.

International Journal of Mechanical Engineering Education , cilt.50, sa.4, ss.902-922, 2022 (ESCI) Sürdürülebilir Kalkınma

DERİN ÖĞRENME YÖNTEMLERİYLE SÜRÜCÜ YORGUNLUK TESPİTİ: BİR UYGULAMA

International Journal on Mathematic, Engineering and Natural Sciences , cilt.6, sa.21, ss.212-223, 2022 (Hakemli Dergi)

ERGONOMİ GÖZ ÖNÜNDE BULUNDURULARAK FRAKTAL OFİS YERLEŞİMİ

Tuncer M. C., Özkan N. F., Ulutaş B.

Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi , cilt.28, sa.1, ss.21-32, 2020 (Hakemli Dergi)

A systematic approach to assess visual inspection tasks: an assembly line case

INTERNATIONAL JOURNAL OF PRODUCTIVITY AND QUALITY MANAGEMENT , cilt.29, sa.3, ss.418-438, 2020 (Scopus)

THE EFFECTS OF ENVIRONMENTAL FACTORS ON JOB PERFORMANCE IN METAL INDUSTRY

Kahya E., Ulutaş B., Özkan N. F.

Journal of Industrial Engineering , cilt.30, sa.1, ss.1-14, 2019 (Hakemli Dergi)

METAL ENDÜSTRİSİNDE KİŞİSEL KORUYUCU DONANIM KULLANIMININ ANALİZİ

Kahya E., Ulutaş B., Özkan N. F.

Selcuk University Journal of Engineering ,Science and Technology , cilt.7, sa.2, ss.420-433, 2019 (Hakemli Dergi)

ÜNİVERSİTE ÖĞRENCİLERİNİN PROSPEKTÜS KULLANMA BİLİNCİ VE DAVRANIŞLARININ ARAŞTIRILMASI

Selçuk Üniversitesi Fen Fakültesi Fen Dergisi , cilt.44, sa.1, ss.51-62, 2018 (Hakemli Dergi)

EFFICIENCY ANALYSIS OF AIRPORTS IN TURKEY CONSIDERING ENVIRONMENTAL EFFECTS

The Central European Review of Economics and Management , cilt.2, sa.1, ss.65-78, 2018 (Hakemli Dergi)

ANALYSIS OF ENVIRONMENTAL CONDITIONS IN METAL INDUSTRY

Kahya E., Ulutaş B., Özkan N. F.

Mühendislik Bilimleri ve Tasarım Dergisi , cilt.6, sa.1, ss.38-46, 2018 (Hakemli Dergi)

Assessing visual control activities in ceramic tile surface defect detection: an eye-tracking study

Ulutaş B., Özkan N. F.

INTERNATIONAL JOURNAL OF INTELLIGENT ENGINEERING INFORMATICS , cilt.5, ss.342-351, 2017 (ESCI)

Using eye-tracking data to evaluate medicine information leaflets on-screen

Journal of Mathematics and Statistical Science , cilt.3, sa.12, ss.364-376, 2017 (Hakemli Dergi)

Türkiye deki illerin iş kazaları ve meslek hastalıkları açısından veri zarflama analizi ile değerlendirilmesi

e-Cumhuriyet Üniversitesi İktisadi ve İdari Bilimler Dergisi (elektronik) , cilt.17, sa.2, ss.23-46, 2016 (Hakemli Dergi)

Assessing the performance of two bio inspired algorithms to solve single row layout problem

International Journal of Manufacturing Engineering , sa.265904, ss.1-12, 2013 (Hakemli Dergi)

Determining the parameters of MSG algorithm for multi period layout problem

Ulutaş B., Saraç T.

JOURNAL OF MANUFACTURING TECHNOLOGY MANAGEMENT , cilt.23, sa.7, ss.922-936, 2012 (ESCI)

Evaluating the effect of teaching strategies and learning styles to students success

e-Journal of New World Sciences Academy NWSA-Education Sciences , cilt.7, sa.12, ss.613-620, 2012 (Hakemli Dergi)

Assessing the relative performance of university departments teaching vs research

Istanbul University Econometrics and Statistics e-journal , cilt.3, ss.125-138, 2011 (Hakemli Dergi)

Evaluating the performance of children protection societies via data envelopment analysis

Ulutaş B., Kırış Ş.

Hacettepe University Journal of Society and Social Work , cilt.19, sa.1, ss.57-70, 2008 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

A Human-Robot Collaboration Workstation Design to Assess Worker Physical Workload with JACK Software

ULUTAŞ B., YETKİN B. N.

8th International Scientific-Technical Conference Manufacturing, MANUFACTURING 2024, Poznan, Polonya, 14 - 16 Mayıs 2024, ss.43-56

Assessing the Effectiveness and Efficiency of Selected Solution Approaches for Two-Dimensional Stock Cutting Problems (Part I): Case Study Printed Circuit Boards

Ulutaş B., Ioannou G., Bracke S.

8th International Scientific-Technical Conference Manufacturing, MANUFACTURING 2024, Poznan, Polonya, 14 - 16 Mayıs 2024, ss.107-121

A Skill-Based MILP Model in Cellular Manufacturing Systems with Human-Robot Collaboration

YETKİN B. N., ULUTAŞ B.

10th IFAC Triennial Conference on Manufacturing Modelling, Management and Control (MIM), Nantes, Fransa, 22 - 24 Haziran 2022, cilt.55, ss.1728-1733

The changing role of humans in new manufacturing systems

International Conference on Industrial Engineering and Management (ICIEM 2021), Jaipur, Hindistan, 17 - 19 Aralık 2021

A Literature Review on Human-Robot Collaborative Environments Considering Ergonomics

Yetkin B. N., Ulutaş B.

GJCIE 2021 Virtual Global Joint Conference on Industrial Engineering and Its Application Areas, 30 Ekim 2021

A Worker Assignment and Assembly Line Balancing Model Considering Workforce Ageing

Yetkin B. N., Ulutaş B.

26th ICPR (Virtual Conference) - Taichung, Taiwan Intelligent and Transformative Production in Pandemic Times, 18 - 21 Temmuz 2021

ROSA and a questionnaire based approach to assess job satisfaction of office workers

5th International Conference on Engineering Sciences, 19 Eylül 2019

Considering product life cycle stages and worker skill level in seru production systems

Süer A. G., ULUTAŞ B., Kaku I., Yin Y.

25th International Conference on Production Research Manufacturing Innovation: Cyber Pyhsical Manufacturing, Chicago, Amerika Birleşik Devletleri, 9 - 14 Ağustos 2019

Sustainability versus efficiency of manufacturing process: structured comparison of two high precision fine grinding process

Radetzky M., Grams L., Bracke S., ULUTAŞ B.

25th International Conference on Production Research Manufacturing Innovation: Cyber Pyhsical Manufacturing, Chicago, Amerika Birleşik Devletleri, 9 - 14 Ağustos 2019

Efficiency and effectivity of high precision grinding manufacturing processes: An approach based on combined DEA and cluster analyses

Bracke S., Radetzky M., Rosebrock C., ULUTAŞ B.

12th CIRP Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME), Naples, İtalya, 18 - 20 Temmuz 2018, cilt.79, ss.292-297

Basic structure of lessons learned approach to improve manufacturing processes: A case study

Bracke S., Ulutas B.

9th IFAC/IFIP/IFORS/IISE/INFORMS Conference on Manufacturing Modelling, Management and Control (IFAC MIM), Berlin, Almanya, 28 - 30 Ağustos 2019, cilt.52, ss.1010-1015

The contest of knowledge,machine and human factors in Industry 4.0

The 60th Diamond Jubilee National Convention of IIIE and International Conference on “Role of Industrial Engineering in Industry 4.0 Paradigm” (ICIEIND), Bhubaneswar, Hindistan, 27 - 30 Ekim 2018

Assessing work related musculoskelatal disorders in metal industry

ULUTAŞ B., ÖZKAN N. F., KAHYA E.

UGAL International Conference - Multidisciplinary HUB for Higher Education Internationalization by Means of Innovative Interaction with the Labour Market and Society, 26 - 27 Ekim 2018

Forming zones in a tandem design AGV system based on cell formation principles

The 60th Diamond Jubilee National Convention of IIIE and International Conference on “Role of Industrial Engineering in Industry 4.0 Paradigm” (ICIEIND), Bhubaneswar, Hindistan, 27 - 30 Eylül 2018

Improving the interior design of an overhead crane cabin: a steel industry case

Ulutas I. B., ULUTAŞ B.

31th International Seminar of Ergonomics (ISET 2018), Poznan, Polonya, 23 - 25 Mayıs 2018

Occupational risk assessment for coil slitting set up operators

ULUTAŞ B., Ulutas I. B.

31th International Seminar of Ergonomics (ISET 2018), Poznan, Polonya, 23 - 25 Mayıs 2018

Assessing musculoskeletal discomfort of forklift drivers in a warehouse

2nd International Mediterranean Science and Engineering Congress, Adana, Türkiye, 25 - 27 Ekim 2017

Assesing Knowledge and Behaviour of Medicine Leaflets Use for University Studends

3RD INTERNATIONAL RESEARCHERS, STATISTICIANS AND YOUNG STATISTICIANS CONGRESS, 24 - 26 Mayıs 2017

From the Point of a Tower Crane Operator’s View: Use ofan Eye-Tracker in Construction Sites

The 2nd Asian Conference on Ergonomics and Design (ACED) 2017, 1 - 04 Haziran 2017

Assessing physical and environmental factors in a home appliance manufacturing facility

2nd Asian Conference on Ergonomics and Design (ACED), Chiba, Japonya, 1 - 04 Haziran 2017

Concept for analysing product sustainability regarding eco-related product perception and efficiency within a product spectrum

Bracke S., ULUTAŞ B., Rosebrock C.

14th Global Conference on Sustainable Manufacturing (GCSM), Stellenbosch, Güney Afrika, 3 - 05 Ekim 2016, cilt.8, ss.28-35 Sürdürülebilir Kalkınma

Assessing sustainable manufacturing related problems for marble facilities: an application

Ayber S., ULUTAŞ B.

14th Global Conference on Sustainable Manufacturing (GCSM), Stellenbosch, Güney Afrika, 3 - 05 Ekim 2016, cilt.8, ss.129-135 Sürdürülebilir Kalkınma

A novel approach to quantify the risk probabilities for a risk analysis methodology

AHFE 2016 International Conference, Amerika Birleşik Devletleri, 27 - 31 Temmuz 2016

A review of reverse logistics studies and assessing future trends for Turkey

Kocabaş M., ULUTAŞ B.

Global Joint Conference on Industrial Engineering and Its Application Areas 2016, 14 - 15 Temmuz 2016

A Framework to Assign Forklift Drivers to Relevant Duties Based on Physical and Cognitive Factors

Global Joint Conference on Industrial Engineering and Its Application Areas 2016, İstanbul, Türkiye, 14 - 15 Temmuz 2016

Türkiye'deki 81 ilin iş kazaları ve meslek hastalıkları açısından veri zarflama yöntemi ile değerlendirilmesi

ULUTAŞ B., AHMET GÜRSEL S.

17th International Symposium on Econometrics, Operations Resarch and Statistics, 2 - 04 Mayıs 2016

Contribution for analysing, saving and prioritising of lessons learned issues regarding product improvement and future product generations

Bracke S., Inoue M., ULUTAŞ B.

13th Global Conference on Sustainable Manufacturing - Decoupling Growth from Resource Use, Binh Dong New City, Vietnam, 16 - 18 Eylül 2015, cilt.40, ss.179-184 Sürdürülebilir Kalkınma

Use of an eye-tracker to assess workers in ceramic tile surface defect detection

Ozkan F., ULUTAŞ B.

3rd International Conference on Control, Decision and Information Technologies (CoDIT), St Pauls Bay, Malta, 6 - 08 Nisan 2016, ss.88-91

Robust cell design with product life cycle consideration

45th Computers and Industrial Engineering Conference, Metz, Fransa, 28 - 30 Ekim 2015

Methods of Manufacturing Planning Prevention of failures Simulation Tools

1st Symposium on Computational Reliability Engineering (CRE) in Product Development and Manufacturing, Düsseldorf, Almanya, 21 - 23 Ekim 2015

Dijital Ortamdaki İlaç Prospektüslerinin Göz Takip Cihazı ile Değerlendirilmesi

21. Ulusal Ergonomi Kongresi, Türkiye, 2 - 04 Ekim 2015

Dijital ortamdaki ilaç prospektüslerin göz takip cihazı ile değerlendirilmesi

ULUTAŞ B., AHMET GÜRSEL S.

21. Ulusal Ergonomi Kongresi, Isparta, Türkiye, 2 - 04 Ekim 2015

Three phase approach for cellular design considering product life cycle stages

15th IFAC/IEEE/IFIP/IFORS Symposium Information Control in Manufacturing (INCOM 2015), 11 - 13 Mayıs 2015

Evaluating ideal medicine leaflet design to enhance usability

Joint International Symposium of 44th International Conference on Computers and Industrial Engineering and 9th International Symposium of Intelligent Manufacturing and Service Systems (CIE44 & IMSS’14), İstanbul, Türkiye, 14 - 16 Ekim 2014

Assesing Undesirable outputs on the performance measurement of cement manufacturing facilities

44th International Conference on Computers and Industrial Engineering, 14 - 16 Ekim 2014

Assessing undesirable outputs on the performance measurement of cement manufacturing facilities

Assessing the number of cells for a cell formation problem

15th IFAC Symposium on Information Control Problems in Manufacturing, Ottawa, Kanada, 11 - 13 Mayıs 2015, cilt.48, ss.1122-1127

Depo alanlarında vinç kullanımının ergonomik açıdan değerlendirilmesi

EZERCELİ Ö., ÖZKAN N. F., ULUTAŞ B.

20. Ulusal Ergonomi Kongresi, Ankara, Türkiye, 26 - 28 Eylül 2014

CDMF-RELSUS concept: Reliable and Sustainable products - Influences on design, manufacturing, layout integration and use phase

Bracke S., Inoue M., ULUTAŞ B., Yamada T.

21st CIRP Conference on Life Cycle Engineering (CIRP LCE), Trondheim, Norveç, 18 - 20 Haziran 2014, cilt.15, ss.8-13 Sürdürülebilir Kalkınma

Maden ocaklarının ergonomik açıdan değerlendirilmesi bir uygulama

9. Endüstri - Işletme Mühendisliği Kurultayı, Eskişehir, Türkiye, 06 Aralık 2013 - 07 Aralık 2014

İlaç Prospektüslerinin Kullanılabilirlik Açısından İncelenmesi ve Bir Uygulama

19. Ulusal ERgonomi Kongresi, Türkiye, 27 - 29 Eylül 2013

Modeling and decision making for rug and carpet discard policies

Joint German Society for Operations Research (GOR) and British Operational Research Society Decision Analysis Special Interest Group (DASIG) Conference, Hamburg, Almanya, 23 - 24 Eylül 2013

Assessing lean manufacturing implementations for an aviation company

ULUTAŞ B., ÖZCAN D.

International IIE Conference, İstanbul, Türkiye, 26 - 28 Haziran 2013

Assessing features of platform and derivative products in terms of similarity

AYDIN M., ULUTAŞ B.

International IIE Conference, İstanbul, Türkiye, 26 - 28 Haziran 2013

Assessing working environment and stressors in a garment company

AYGÜN B., ÖZKAN N. F., ULUTAŞ B.

International IIE Conference, İstanbul, Türkiye, 26 - 28 Haziran 2013

Assesing working environment and stressorsin a garment company

AYGÜN B., ÖZKAN N. F., ULUTAŞ B.

International IIE Confernce, 2013, 26 - 28 Haziran 2013

Kamu Binalarının Yürüme Engelliler için Ulaşılabilirlik Açısından İncelenmesi Eskişehir ve Kütahya Örneği

18. Ulusal Ergonomi Kongresi, Türkiye, 15 - 18 Kasım 2012

Spor salonlarının ergonomi kuralları göz önünde bulundurularak değerlendirilmesi

18. Ulusal Ergonomi Kongresi, Gaziantep, Türkiye, 15 - 18 Kasım 2012

Assessing the critical factors for materials handling activities in sustainable manufacturing cement industry

10th Global Conference on Sustainable Manufacturing Towards Implementing Sustainable Manufacturing, İstanbul, Türkiye, 31 Ekim - 02 Kasım 2012 Sürdürülebilir Kalkınma

Selecting the appropriate metal cutting fluids in sustainable manufacturing environments

ULUTAŞ B., NÜGÜ M. O.

10th Global Conference on Sustainable Manufacturing Towards Implementing Sustainable Manufacturing, İstanbul, Türkiye, 31 Ekim - 02 Kasım 2012 Sürdürülebilir Kalkınma

A modified flexible bay and slicing structure for unequal area facilities

14th IFAC Symposium on Information Control Problems in Manufacturing, BUCHAREST, Romanya, 23 - 25 Mayıs 2012

Evaluating office layouts by considering ergonomic principles

25th Conference of European Chapter on Combinatorial Optimization (ECCO25), Antalya, Türkiye, 26 - 28 Nisan 2012

Cep Telefonlarından İnternete Erişimin Ergonomik Açıdan İncelenmesi

17. Ulusal ERgonomi Kongresi, Türkiye, 14 - 16 Ekim 2011

ESOGÜ Endüstri Mühendisliği Bölümü Web Sitesinin Ergonomik Açıdan İncelenmesi ve Öneriler

17. Ulusal Ergonomi Kongresi, Türkiye, 14 - 16 Ekim 2011

ESOGU EM bölümü web sitesinin ergonomik açıdan değerlenmesi

17. Ulusal Ergonomi Kongresi, Eskişehir, Türkiye, 14 - 16 Ekim 2011

Vardiyalı çalışma çizelgelerinin hemşireler için değerlendirilmesi

ULUTAŞ B., ÇETİNKAYA H.

17. Ulusal Ergonomi Kongresi, Eskişehir, Türkiye, 14 - 16 Ekim 2011

Evaluating the effect of teaching strategies and learning styles to students success

5th International Computer & Instructional Technologies Symposium, Elazığ, Türkiye, 20 - 22 Eylül 2011

An application of SMED methodology

Proceedings of the International Conference on Industrial Engineering and Systems Management (ICIESM 2011), Paris, Fransa, 27 - 29 Temmuz 2011

Assessing the relative performance of university departments teaching vs research

12th International Symposium on Econometrics Operations Research and Statistics, Denizli, Türkiye, 26 - 29 Mayıs 2011

Determining the parameters of MSG algorithm for multi period layout problem

ULUTAŞ B., SARAÇ T.

2nd International Conference on Production and Industrial Engineering (CPIE-2010), 3 - 05 Aralık 2010

Assessing the performance of bio inspired heuristics for single row layout problems

ULUTAŞ B., ULUTAŞ B. B.

30. Ulusal Yöneylem Araştırması ve Endüstri Mühendisliği Kongresi (YAEM 2010), İstanbul, Türkiye, 30 Haziran - 02 Temmuz 2010

An analytical network process combined data envelopment analysis methodology to evaluate the performance of airports in Turkey

ULUTAŞ B., ULUTAŞ B. B.

International Symposium on the Analytic Hierarchy Process 2009, PITTSBURGH, Amerika Birleşik Devletleri, 30 Temmuz - 01 Ağustos 2009

An analytical network process model to evaluate the nature based disasters at Turkey

International Symposium on the Analytic Hierarchy Process 2009, PITTSBURGH, Amerika Birleşik Devletleri, 30 Temmuz - 01 Ağustos 2009

Evaluating the global threats for humanity An analytical network process model

SAĞIR M., ULUTAŞ B.

International Symposium on the Analytic Hierarchy Process 2009, PITTSBURGH, Amerika Birleşik Devletleri, 30 Temmuz - 01 Ağustos 2009

A sub gradient algorithm to solve dynamic facility layout problem

ULUTAŞ B., SARAÇ T.

The 5th International Symposium on Management, Engineering and Informatics (MEI 2009), 10 - 13 Temmuz 2009

Which energy source to use A case study for Turkey

Aktar Demirtaş E., Ulutaş B.

INFORMS, İstanbul, Türkiye, 6 - 10 Temmuz 2003

Evaluating the emotions of internet newspaper readers by kansei engineering

23rd European Conference on Operational Research (EURO2009), Bonn, Almanya, 5 - 08 Temmuz 2009

A clonal selection algorithm for the quadratic multiple knapsack problem

SARAÇ T., ULUTAŞ B.

23rd European Conference on Operational Research (EURO2009), Bonn, Almanya, 5 - 08 Temmuz 2009

A clonal selection algorithm for the quadratic mutiple knapsack problem

SARAÇ T., ULUTAŞ B.

23rd European Conference on Operational Research (EURO2009), Bonn, Almanya, 5 - 08 Temmuz 2009

The performance of clonal selection algorithm for cell formation problem compared to other nature based methods

4th International Conference of Group Technology/Cellular Manufacturing 2009, Kitakyushu, Japonya, 16 - 18 Şubat 2009

A Clonal Selection Algorithm for Cell Formation Problem with Alternative Routings

ULUTAŞ B., SARAÇ T.

International Symposium on Group Technology and Cellular Manufacturing (GT/CM2009), 16 - 18 Şubat 2009

İnternet gazetelerinin ana sayfa tasarımında ergonomik faktörlerin incelenmesi

14. Ulusal Ergonomi Kongresi, Trabzon, Türkiye, 30 Ekim - 01 Kasım 2008

Dinamik yerlesim problemleri için gelistirilen klonal seçim algoritması Ayakkabı sektöründe uygulama

28.Ulusal Yöneylem ve Endüstri Mühendisliği Kongresi, İstanbul, Türkiye, 30 Haziran - 02 Temmuz 2008

Alternative layout procedures for multi period production environments

12th International Conference on Information Processing and Management of Uncertainty in Knowledge Based Systems (IPMU), Malaga, İspanya, 22 - 27 Haziran 2008

Eskisehir Osmangazi Üniversitesi Endüstri Mühendisliği dersliklerinin ergonomik analizi

ULUTAŞ B., EROL D.

13. Ulusal Ergonomi Kongresi, Kayseri, Türkiye, 6 - 08 Aralık 2007

Kombilerde kumanda panellerinin ergonomik değerlendirilmesi

AKSU Ö., ULUTAŞ B., EROL D.

13. Ulusal Ergonomi Kongresi, Kayseri, Türkiye, 6 - 08 Aralık 2007

Tesis yerlesim problemlerinde klonal ve psikoklonal seçim algoritmaları

27.Ulusal Yöneylem ve Endüstri Mühendisliği Kongresi, İzmir, Türkiye, 2 - 04 Temmuz 2007

Parameter setting for clonal selection algorithm in facility layout problems

ULUTAŞ B., Islier A. A.

International Conference on Computational Science and Its Applications (ICCSA 2007), Kuala-Lumpur, Malezya, 26 - 29 Ağustos 2007, cilt.4705, ss.886-889

Reallocation of the children according to their similarity dissimilarity a case study at the children protection society

ULUTAŞ B., KIRIŞ Ş.

3rd International Conference of Group Technology/Cellular Manufacturing 2006, Groningen, Hollanda, 3 - 05 Temmuz 2006

A data envelopment analysis approach to evaluate performance of manufacturing cells

KIRIŞ Ş., ULUTAŞ B.

3rd International Conference of Group Technology/Cellular Manufacturing 2006, Groningen, Hollanda, 3 - 05 Temmuz 2006

An artificial immune system algorithm for single row layout problem

36th International Conference on Computers and Industrial Engineering, Taipei, Tayvan, 20 - 23 Haziran 2006

Artificial immune systems for group technology

1st International symposium on bio-inspired computing, Johor-Bahru, Malezya, 5 - 07 Eylül 2005

A new approach to the dynamic layout problem

35th International Conference on Computers and Industrial Engineering, İstanbul, Türkiye, 19 - 22 Haziran 2005

Türkiye deki enerji kaynaklarının değerlendirilmesi ve tüketim yerlerine en uygun dağılımı

2. Ulusal Ege Enerji Sempozyumu ve Sergisi, Kütahya, Türkiye, 26 - 28 Mayıs 2004 Sürdürülebilir Kalkınma

Group technology rationle to assign roommates in student dormitories

Group Technology/Cellular Manufacturing World Symposium 2003, Colombes, Fransa, 28 - 30 Temmuz 2003

A machine partition method in tandem design AGVS for real life applications

2nd International Conference on Responsive Manufacturing, Gaziantep, Türkiye, 26 - 28 Haziran 2002

A review on AGV Systems

21.Ulusal Yöneylem ve Endüstri Mühendisliği Kongresi, Gazimagusa, Kıbrıs (Kktc), 12 - 14 Haziran 2000

AGV Systems and Applications

Uluslararası Endüstri Mühendisliği Sempozyumu, İstanbul, Türkiye, 10 - 13 Mart 1999

Kitap & Kitap Bölümleri

Application of Digital Human Modelling and Factorial Experiments for Workstation Optimization

Yetkin B. N., Ulutaş B.

Human Factors and Simulation, Julia Wright,Daniel Barber, Editör, AHFE Open Access, New York, ss.8-15, 2024

Two-dimensional cutting problems: Effectiveness and efficiency of selected solution approaches; Case Study Printed Circuit Boards (Part I)

Ulutaş B., Georgios I., Bracke S.

Advances in Manufacturing IV Volume 1-Mechanical Engineering: Digitalization, Sustainability and Industry , Bartosz Gapinski,Olaf Ciszak,Vitalii Ivanov,Jose Mendes Machado, Editör, Springer Nature Switzerland Ag, Geneve, ss.107-121, 2024

A Human-Robot Collaboration Workstation Design to Assess Worker Physical Workload with JACK Software

Ulutaş B., Yetkin B. N.

Advances in Manufacturing IV: Volume 5 - Biomedical Engineering: Digitalization, Sustainability and Industry Applications, Gorski,F.,Păcurar,R.,Roca González,J.F.,Rychlik,M., Editör, Springer Nature Switzerland Ag, Geneve, ss.43-56, 2024

Assessing Cognitive Load and Visual Attention in a Railway Simulator using Eye Tracking Technology: A Pilot Study

ÖZKAN N. F., ALTIN İ., ULUTAŞ B.

Advances in Engineering Research, Petrova V.M., Editör, NOVA Science Publishers, Inc., New York, ss.91-114, 2023

PBL Applications in Teaching Topics related with “Data”

ULUTAŞ B., Timur C., Chelai O., Sa V., YILDIRIM H., Caprioara D.

Higher Education in a Digital Era through Project-based E-learning: Contributes of the RESTART4EDU Project, Dias C., P., Azevedo A.S., Oliveira I., Kara E., Ergunay O., Donmez H. M., Girtu M., Caprioara D., Editör, Aletheia, Associação Científica e Cultural, Braga, ss.187-198, 2023

A Literature Review on Human-robot Collaborative Environments Considering Ergonomics

YETKİN B. N., ULUTAŞ B.

Lecture Notes in Management and Industrial Engineering, Calisir F., Editör, Springer, Cham, ss.49-60, 2023

Efficiency of Assessment of Onshore Wind Farms in Turkey: A DEA Approach

Advances in Engineering Research Volume 48, Viktoria M. Petrova, Editör, Nova Science Publisher, New York, ss.91-114, 2022

Efficiency Assessment of Onshore Wind Farms in Turkey: A DEA Approach

Advances in Engineering Research, Victoria M. Petrova, Editör, NOVA SCIENCE PUBLISHERS, ss.91-114, 2022

Efficiency Evaluation of Health Services of Selected Countries during the COVID-19 Pandemic

Advances in Health and Disease Volume 54, Lowell T. Duncan, Editör, Nova Science Publisher, New York, ss.119-136, 2022

Eye Tracking Applications in Real Life Manufacturing Environments: Materials Handling and Quality Control

Advances in Engineering Research, Victoria M. Petrova, Editör, NOVA Science Publishers Inc. , New York, ss.93-118, 2021

Testing Performance of Assembly Workers by Use of Dexterity Tests and Eye-Tracking System

Advances in Engineering Research, Victoria M. Petrova, Editör, NOVA Science Publishers Inc. , New York, ss.167-184, 2021

Forming Zones in a Tandem Design AGV System Based onCell Formation Principles

Advances in Mechanical Engineering in the Era of New Technologies, Jayanta Kumar Nath, Sasmeeta Tripathy, Bibhuti Bhusan Pradhan, Rajendra Prasad Mohanty, Editör, Siksha ‘O’ Anusandhan, Bhubaneswar, Odisha, ss.176-184, 2020

A Novel to Approach to Quantify the Risk Probabilities for a Risk Analysis Methodology