| AVESİS

Publication Type

Publication Sub Type

(WOS) Research Areas

SDG

Researchers

Year


Published journal articles indexed by SCI, SSCI, and AHCI
Multi-choice conic goal programming model-based network data envelopment analysis Deliktaş D., Üstün Ö., Aktar Demirtaş E., Arapoğlu R. A. RAIRO RECHERCHE OPERATIONNELLE , vol.58, pp.3391-3416, 2024 (SCI-Expanded)
Simultaneous optimization of the vulcanization characteristics and mechanical properties of chloroprene and natural rubber blend by response surface methodology Aktar Demirtaş E., Goksuzoglu M., Karadeniz Y. Polymer Bulletin , vol.81, no.14, pp.12691-12714, 2024 (SCI-Expanded)
A multi-objective nonlinear integer programming model for mixed runway operations within the TMAs Kaplan Z., Çetek C., SARAÇ T. Aeronautical Journal , vol.128, no.1320, pp.340-370, 2024 (SCI-Expanded)
Extensive Model and Matheuristic Algorithm for the Train Platforming Problem with Two-Train-Capacity Tracks: A Case Study of Prague Central Station Akyol Özer E., Bulicek J., SARAÇ T. Transportation Research Record , vol.2678, no.4, pp.131-154, 2024 (SCI-Expanded)
Optimization of SiC-based shear thickening fluids behavior using a mathematical approach Sofuğlu M. A., SAĞIR M. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science , vol.238, no.7, pp.2841-2847, 2024 (SCI-Expanded)
Comparison of automated machine learning (AutoML) libraries in time series forecasting Zaman serisi tahminlemede otomatikleştirilmiş makine öğrenmesi (AutoML) kütüphanelerinin karşılaştırılması Akkurt N., HASGÜL S. Journal of the Faculty of Engineering and Architecture of Gazi University , vol.39, no.3, pp.1693-1701, 2024 (SCI-Expanded)
Simultaneous optimization of WEDM parameters for CPOH steel by central composite design Ceylan S. M., Sahin Y., AKTAR DEMİRTAŞ E. Indian Journal of Engineering and Materials Sciences , vol.31, no.2, pp.297-307, 2024 (SCI-Expanded)
An analytical network process model for deciding on Turkiye’s Coal Mining Policy Alpay Ş., Yavuz M. MINERAL RESOURCES MANAGEMENT , vol.40, no.3, pp.113-134, 2024 (SCI-Expanded)
Determining the factor levels for a green supply chain using response surface methodology based discrete event simulation Dosdoğru A. T., Buruk Şahin Y., Göçken M., Boru İpek A. Kybernetes , 2024 (SCI-Expanded)
Drone Arc Routing Problems and Metaheuristic Solution Approach Altin I., Sipahioglu A. DRONES , vol.8, no.8, pp.1-30, 2024 (SCI-Expanded)
KPI based performance estimation in production systems using deep learning techniques Derin öğrenme teknikleri kullanılarak üretim sistemlerinde KPI tabanlı performans tahminleme Akkurt T., SARIÇİÇEK İ. Journal of the Faculty of Engineering and Architecture of Gazi University , vol.39, no.3, pp.1499-1507, 2024 (SCI-Expanded)
PROJECT SELECTION REVISITED: CUSTOMIZED TYPE-2 FUZZY ORESTE APPROACH FOR PROJECT PRIORITIZATION ULUSKAN M., Beki B. International Journal of Industrial Engineering : Theory Applications and Practice , vol.31, no.2, pp.317-339, 2024 (SCI-Expanded)
Bi-objective optimization-based multi-criteria decision-making framework for disassembly line balancing and employee assignment problem DENİZ N., ÖZÇELİK F. KYBERNETES , vol.53, no.3, pp.1073-1091, 2024 (SCI-Expanded)
Flying Sidekick Traveling Salesman Problem in Truck–Drone Team Logistics with Energy Issues Akşit B., Özden Gürcan G., Sarıçiçek İ. TRANSPORTATION RESEARCH RECORD , pp.1-15, 2024 (SCI-Expanded)
Integrated cell formation and part scheduling: A new mathematical model along with two meta-heuristics and a case study for truck industry Buruk Şahin Y., Alpay Ş. SCIENTIA IRANICA INTERNATIONAL JOURNAL OF SCIENCE & TECHNOLOGY , vol.31, no.11, pp.888-905, 2024 (SCI-Expanded)
A MILP model and a heuristic algorithm for post-disaster connectivity problem with heterogeneous vehicles Tükenmez İ., Saraç T., Kaya O. Journal of Heuristics , vol.30, no.5-6, pp.359-396, 2024 (SCI-Expanded)
Renewable Energy-Aware Machine Scheduling Under Intermittent Energy Supply ERTEM M. IEEE ACCESS , vol.12, pp.23613-23625, 2024 (SCI-Expanded)
New representation schemes for identical parallel machine scheduling problems with sequence dependent setup times Takan A., SARAÇ T. JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.38, no.2, pp.1041-1054, 2023 (SCI-Expanded)
A mathematical model for the unrelated parallel machine scheduling problem with common server and process resource constraints Şaştım Ö., HASGÜL S. Journal of the Faculty of Engineering and Architecture of Gazi University , vol.39, no.1, pp.607-619, 2023 (SCI-Expanded)
A matheuristic algorithm for multi-objective unrelated parallel machine scheduling problem Çok amaçli ilişkisiz paralel makine çizelgeleme problemi için bir matsezgisel algoritma SARAÇ T., ÖZÇELİK F. Journal of the Faculty of Engineering and Architecture of Gazi University , vol.38, no.3, pp.1953-1966, 2023 (SCI-Expanded)
Optimization of biodegradation yield of reactive blue 49: An integrated approach using response surface methodology based marine predators algorithm Oge E., NURAL YAMAN B., BURUK ŞAHİN Y. JOURNAL OF MICROBIOLOGICAL METHODS , vol.206, 2023 (SCI-Expanded)
A modified metaheuristic algorithm for a home health care routing problem with health team skill levels Somar S., URAZEL B., BURUK ŞAHİN Y. Applied Soft Computing , vol.148, 2023 (SCI-Expanded)
Predictive Six Sigma for Turkish manufacturers: utilization of machine learning tools in DMAIC ULUSKAN M., Karşı M. G. International Journal of Lean Six Sigma , vol.14, no.3, pp.630-652, 2023 (SCI-Expanded)
Emission and Flight Time Optimization Model for Aircraft Landing Problem ÇEÇEN R. K., SARAÇ T., Cetek C. TRANSPORTATION RESEARCH RECORD , vol.2677, no.2, pp.763-773, 2023 (SCI-Expanded)
A MIP model and a hybrid genetic algorithm for flexible job-shop scheduling problem with job-splitting Tutumlu B., SARAÇ T. Computers and Operations Research , vol.155, 2023 (SCI-Expanded)
A novel conflict free routing with multi pickup delivery tasks for autonomous vehicles SARIÇİÇEK İ., YAZICI A., ASLAN Ö. ROBOTIC INTELLIGENCE AND AUTOMATION , vol.43, pp.191-206, 2023 (SCI-Expanded)
A case study for surgical mask production during the COVID-19 pandemic: continuous improvement with Kaizen and 5S applications AKTAR DEMİRTAŞ E., Gultekin O. S., Uskup C. International Journal of Lean Six Sigma , vol.14, no.3, pp.679-703, 2023 (SCI-Expanded)
Unrelated parallel machine scheduling problem with stochastic sequence dependent setup times Saraç T., Özçelik F., Ertem M. Operational Research , vol.23, no.3, 2023 (SCI-Expanded)
How can infectious medical waste be forecasted and transported during the COVID-19 pandemic? A hybrid two-stage method Xin L., Xi C., SAĞIR M., Wenbo Z. TECHNOLOGICAL FORECASTING AND SOCIAL CHANGE , vol.187, 2023 (SSCI)
Estimation of biosurfactant production parameters and yields without conducting additional experiments on a larger production scale   SARAÇ T., ANAGÜN A. S., ÖZÇELİK F., AYTAR ÇELİK P., TOPTAŞ Y., KIZILKAYA B., et al. JOURNAL OF MICROBIOLOGICAL METHODS , vol.202, no.106597, 2022 (SCI-Expanded)
Investigation of cognitive strain during visual inspection of cutting tools İlhan N., Özkan N. F. LE TRAVAIL HUMAIN , vol.85, no.2, pp.105-122, 2022 (SCI-Expanded)
A combined mathematical model and genetic algorithm solution methodology for tri-levels electrical grid protection problem with multiple types of attacks Baskan O., SAĞIR M. COMPUTERS & INDUSTRIAL ENGINEERING , vol.173, 2022 (SCI-Expanded)
A bi-objective ergonomic assembly line balancing model with conic scalarization method YETKİN B. N., KAHYA E. Human Factors and Ergonomics In Manufacturing , vol.32, no.6, pp.494-507, 2022 (SCI-Expanded)
Görsel muayenede arama ve karar verme sürecini deǧerlendirmeye yönelik yeni bir yaklaşim A novel approach to assess search and decision-making process in visual inspection Ege B., Ulutaş B. Journal of the Faculty of Engineering and Architecture of Gazi University , vol.37, no.3, pp.1535-1551, 2022 (SCI-Expanded)
A Predictive Maintenance System Design and Implementation for Intelligent Manufacturing Cinar E., Kalay S., Saricicek İ. MACHINES , vol.10, no.11, 2022 (SCI-Expanded)
Energy efficient routing and task scheduling for autonomous transfer vehicles in intra logistics SARIÇİÇEK İ., Keser S., Cibi A., Ozdemir T., YAZICI A. Kuwait Journal of Science , vol.49, no.1, 2022 (SCI-Expanded)
Workers-constrained shutdown maintenance scheduling with skills flexibility: Models and solution algorithms ERTEM M., As'ad R., Awad M., Al-Bar A. COMPUTERS & INDUSTRIAL ENGINEERING , vol.172, 2022 (SCI-Expanded)
Prognostics-aware multi-robot route planning to extend the lifetime Yayan U., Yazıcı A., Sarıçiçek İ. KUWAIT JOURNAL OF SCIENCE , vol.49, no.4, pp.1-20, 2022 (SCI-Expanded)
A mix integer programming model and solution approach to determine the optimum machine number in the unrelated parallel machine scheduling problem SARAÇ T., Tutumlu B. JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.37, no.1, pp.329-345, 2022 (SCI-Expanded)
A goal programming model for balancing agent loads in the multi-resource generalized assignment problem Çok kaynakli genellestirilmis atama probleminde ajan yüklerinin dengelenmesi için bir hedef programlama modeli ÖZÇELİK F., SARAÇ T. Journal of the Faculty of Engineering and Architecture of Gazi University , vol.37, no.1, pp.193-205, 2022 (SCI-Expanded)
Enhancing Six Sigma Understanding: Insights into Various Dimensions and Aspects of Six Sigma ULUSKAN M. ENGINEERING MANAGEMENT JOURNAL , vol.34, no.1, pp.99-128, 2022 (SCI-Expanded)
A stochastic approach for the single-machine scheduling problem to minimize total expected cost with client-dependent tardiness costs ÖZÇELİK F., ERTEM M., SARAÇ T. ENGINEERING OPTIMIZATION , vol.54, no.7, pp.1178-1192, 2022 (SCI-Expanded)
A questionnaire-based musculoskeletal disorder assessment for aircraft maintenance technicians Yazgan E., ÖZKAN N. F., ULUTAŞ B. AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY , vol.94, no.2, pp.240-247, 2022 (SCI-Expanded)
A bi-objective mathematical model for an unrelated parallel machine scheduling problem with job-splitting SARAÇ T., Tutumlu B. JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.37, no.4, pp.2293-2307, 2022 (SCI-Expanded)
Response surface methodology to tune artificial neural network hyper-parameters Bozkurt Keser S., Buruk Şahin Y. Expert Systems , vol.38, no.8, 2021 (SCI-Expanded)
Mixed-integer programming models for 1.5-dimensional cutting problem with technical constraints Saraç T., Sağır M. JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.36, no.1, pp.291-302, 2021 (SCI-Expanded)
Meta-heuristic algorithm for aircraft pre-tactical conflict resolution with altitude and heading angle change maneuvers Cecen R. K., SARAÇ T., Cetek C. TOP , vol.29, no.3, pp.629-647, 2021 (SCI-Expanded)
Kritik Sistemlerin Savunma Planlaması için İki Seviyeli Çoklu Saldırı Tipli Koruma Modelleri BAŞKAN O., SAĞIR M. Journal Of The Faculty Of Engineering And Architecture Of Gazi University , vol.36, no.4, pp.1909-1922, 2021 (SCI-Expanded)
OPTIMIZATION OF HYDROGEN GENERATION BY CATALYTIC HYDROLYSIS OF NaBH4 WITH HALLOYSITE-SUPPORTED CoB CATALYST USING RESPONSE SURFACE METHODOLOGY Hoşgün S., Özdemir M., Buruk Şahin Y. Clays And Clay Minerals , vol.1, no.69, pp.128-141, 2021 (SCI-Expanded)
DSS-Based Process Control and FMEA Studies for Different Processes in the Field of Textile Buruk Şahin Y., Aktar Demirtaş E. Tekstil Ve Konfeksiyon , vol.31, no.4, pp.250-263, 2021 (SCI-Expanded)
Bi-level multiple attack type protection models for defense planning of critical systems Baskan O., SAĞIR M. JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.36, no.4, pp.1909-1921, 2021 (SCI-Expanded)
Single-Machine Order Acceptance and Scheduling Problem Considering Setup Time and Release Date Relations Bicakci P. S., KARA İ., Sagir M. Arabian Journal for Science and Engineering , vol.46, no.2, pp.1549-1559, 2021 (SCI-Expanded)
Application of the ANP in the interview phase of air traffic controller candidate selection process Özdemir M., SAĞIR M. Aircraft Engineering and Aerospace Technology , vol.93, no.10, pp.1616-1623, 2021 (SCI-Expanded)
Assembly line worker assignment and rebalancing problem: A mathematical model and an artificial bee colony algorithm Karaş A., Özçelik F. Computers and Industrial Engineering , vol.156, 2021 (SCI-Expanded)
Assessment of musculoskeletal disorders among employees working office workplaces in the manufacturing sector KAHYA E. Work , vol.69, no.3, pp.1103-1113, 2021 (SSCI)
Iterated greedy algorithms enhanced by hyper-heuristic based learning for hybrid flexible flowshop scheduling problem with sequence dependent setup times: A case study at a manufacturing plant Özsoydan F. B., Sagir M. COMPUTERS & OPERATIONS RESEARCH , vol.125, 2021 (SCI-Expanded)
Teknik kısıtlı 1,5 boyutlu kesme problemi için karma tamsayılı matematiksel modeller Saraç T., Sağır M. Journal Of The Faculty Of Engineering And Architecture Of Gazi University , vol.36, no.1, pp.291-302, 2021 (SCI-Expanded)
A TWO-STAGE SOLUTION APPROACH FOR PLASTIC INJECTION MACHINES SCHEDULING PROBLEM Saraç T., Sipahioğlu A., Ozer E. A. Journal of Industrial and Management Optimization , vol.17, no.3, pp.1289-1314, 2021 (SCI-Expanded)
Intuitionistic fuzzy c-control charts using defuzzification and likelihood methods ERCAN TEKŞEN H., Anagun A. S. JOURNAL OF INTELLIGENT & FUZZY SYSTEMS , vol.39, no.5, pp.6465-6473, 2020 (SCI-Expanded)
An empirical study investigating the user acceptance of a virtual conversational agent interface for family health history collection among the geriatric population Ponathil A., Özkan N. F., Bertrand J., Agnisarman S., Narasimha S., Welch B., et al. HEALTH INFORMATICS JOURNAL , vol.26, no.4, pp.2946-2966, 2020 (SCI-Expanded)
Application of hidden Markov models to eye tracking data analysis of visual quality inspection operations Ulutaş B., Özkan N. F., Michalski R. CENTRAL EUROPEAN JOURNAL OF OPERATIONS RESEARCH , vol.28, pp.761-777, 2020 (SCI-Expanded)
Family health history collected by virtual conversational agents: An empirical study to investigate the efficacy of this approach Ponathil A., Ozkan F., Welch B., Bertrand J., Chalil Madathil K. JOURNAL OF GENETIC COUNSELING , vol.29, no.6, pp.1081-1092, 2020 (SCI-Expanded)
Artificial Neural Networks as a quality loss function for Six Sigma ULUSKAN M. TOTAL QUALITY MANAGEMENT & BUSINESS EXCELLENCE , vol.31, pp.1811-1828, 2020 (SSCI)
Improving the rapid office strain assessment method with an integrated multi-criteria decision making approach KILIÇ DELİCE E., Can G. F., KAHYA E. JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.35, no.3, pp.1297-1314, 2020 (SCI-Expanded)
Evaluation of landfill sites using GIS-based MCDA with hesitant fuzzy linguistic term sets ÖZKAN B., SARIÇİÇEK İ., ÖZCEYLAN E. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH , vol.27, no.34, pp.42908-42932, 2020 (SCI-Expanded)
A mixed integer nonlinear model for air refueling optimization to save fuel in military deployment operations Toydas M., SARAÇ T. International Journal of Industrial Engineering : Theory Applications and Practice , vol.27, no.4, pp.627-644, 2020 (SCI-Expanded)
MIP models and a matheuristic algorithm for an identical parallel machine scheduling problem under multiple copies of shared resources constraints Ozer E. A., SARAÇ T. TOP , vol.27, no.1, pp.94-124, 2019 (SCI-Expanded)
GIS-based MCDM modeling for landfill site suitability analysis: A comprehensive review of the literature ÖZKAN B., ÖZCEYLAN E., SARIÇİÇEK İ. ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH , vol.26, no.30, pp.30711-30730, 2019 (SCI-Expanded)
A mobile application based on multi-criteria decision-making methods for underground mining method selection İPHAR M., ALPAY Ş. INTERNATIONAL JOURNAL OF MINING RECLAMATION AND ENVIRONMENT , vol.33, no.7, pp.480-504, 2019 (SCI-Expanded)
An extended review on disassembly line balancing with bibliometric & social network and future study realization analysis DENİZ N., ÖZÇELİK F. JOURNAL OF CLEANER PRODUCTION , vol.225, pp.697-715, 2019 (SCI-Expanded)
Evaluation of brain computer interface usage in terms of cognitive load: a pilot study Kahya E., Özkan N. F., Ulutaş B. JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.34, no.2, pp.648-662, 2019 (SCI-Expanded)
ASSESSING OCCUPATIONAL RISK FACTORS FOR FORKLIFT DRIVERS Ulutaş B., Özkan N. F. TRAVAIL HUMAIN , vol.82, no.2, pp.129-149, 2019 (SCI-Expanded)
An immune system based algorithm for cell formation problem Ulutaş B. JOURNAL OF INTELLIGENT MANUFACTURING , vol.30, pp.2835-2852, 2019 (SCI-Expanded)
Mismatch between classroom furniture and anthropometric measures of university students KAHYA E. INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS , vol.74, 2019 (SCI-Expanded)
A mathematical model and heuristic algorithms for an unrelated parallel machine scheduling problem with sequence-dependent setup times, machine eligibility restrictions and a common server Bektur G., SARAÇ T. COMPUTERS & OPERATIONS RESEARCH , vol.103, pp.46-63, 2019 (SCI-Expanded)
Analysis of Lean Six Sigma tools from a multidimensional perspective ULUSKAN M. TOTAL QUALITY MANAGEMENT & BUSINESS EXCELLENCE , vol.30, pp.1167-1188, 2019 (SSCI)
Single machine scheduling problem with stochastic sequence-dependent setup times ERTEM M., ÖZÇELİK F., SARAÇ T. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH , vol.57, no.10, pp.3273-3289, 2019 (SCI-Expanded)
Data-theoretic methodology and computational platform to quantify organizational factors in socio-technical risk analysis Pence J., Sakurahara T., Zhu X., Mohaghegh Z., ERTEM M., Ostroff C., et al. RELIABILITY ENGINEERING & SYSTEM SAFETY , vol.185, pp.240-260, 2019 (SCI-Expanded)
Scheduling trucks in a multi-door cross-docking system with time windows Ozden G., Sarıçiçek İ. BULLETIN OF THE POLISH ACADEMY OF SCIENCES-TECHNICAL SCIENCES , vol.67, no.2, pp.349-362, 2019 (SCI-Expanded)
Different methods to fuzzy X- R control charts used in production Interval type-2 fuzzy set example ERCAN TEKŞEN H., Anagun A. S. JOURNAL OF ENTERPRISE INFORMATION MANAGEMENT , vol.31, no.6, pp.848-866, 2018 (SSCI)
Methodology to evaluate the monetary benefit of Probabilistic Risk Assessment by modeling the net value of Risk-Informed Applications at nuclear power plants Pence J., Abolhelm M., Mohaghegh Z., Reihani S., ERTEM M., Kee E. RELIABILITY ENGINEERING & SYSTEM SAFETY , vol.175, pp.171-182, 2018 (SCI-Expanded)
Development of an ANN-based decision-making method for determining optimum parameters in turning operation ORAK S., ARAPOĞLU R. A., SOFUOĞLU M. A. SOFT COMPUTING , vol.22, no.18, pp.6157-6170, 2018 (SCI-Expanded)
Classification of BCI Users Based on Cognition ÖZKAN N. F., KAHYA E. COMPUTATIONAL INTELLIGENCE AND NEUROSCIENCE , 2018 (SCI-Expanded)
Interval type-2 fuzzy c-control charts using likelihood and reduction methods ERCAN TEKŞEN H., Anagun A. S. Soft Computing , vol.22, no.15, pp.4921-4934, 2018 (SCI-Expanded)
Auditory Suspicious Event Databases: DASE and Bi-DASE Barkana B. D., John N., SARIÇİÇEK İ. IEEE ACCESS , vol.6, pp.33977-33985, 2018 (SCI-Expanded)
Equipment selection based on two different fuzzy multi criteria decision making methods: Fuzzy TOPSIS and fuzzy VIKOR ALPAY Ş., İPHAR M. OPEN GEOSCIENCES , vol.10, no.1, pp.661-677, 2018 (SCI-Expanded)
Single allocation p-hub median location and routing problem with simultaneous pick-up and delivery Kartal Z., HASGÜL S., Ernst A. T. TRANSPORTATION RESEARCH PART E-LOGISTICS AND TRANSPORTATION REVIEW , vol.108, pp.141-159, 2017 (SCI-Expanded)
Performance analysis of descriptive statistical features in retinal vessel segmentation via fuzzy logic, ANN, SVM, and classifier fusion Barkana B. D., SARIÇİÇEK İ., Yildirim B. KNOWLEDGE-BASED SYSTEMS , vol.118, pp.165-176, 2017 (SCI-Expanded)
Efficiency analysis of cement manufacturing facilities in Turkey considering undesirable outputs Özkan N. F., Ulutaş B. JOURNAL OF CLEANER PRODUCTION , vol.156, pp.932-938, 2017 (SCI-Expanded)
Assessing ergonomic risks in an university's administrative offices ÖZKAN N. F., KAHYA E. JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.32, no.1, pp.141-150, 2017 (SCI-Expanded)
The use of full factorial design for modeling the effects of process parameters on decolorization of Reactive Yellow 15 by using Fe/ZrO2 catalyst AŞÇI Y., AYAS N., AKTAR DEMİRTAŞ E. DESALINATION AND WATER TREATMENT , vol.69, pp.328-334, 2017 (SCI-Expanded)
Phenol tolerance and biodegradation optimization of Serratia marcescens NSO9-1 using Plackett-Burman and Box-Behnken design SARAÇ N., UĞUR A., ŞİMŞEK Ö., AYTAR ÇELİK P., Toptas Y., Buruk Y., et al. Environmental Engineering and Management Journal , vol.16, no.11, pp.2637-2645, 2017 (SCI-Expanded)
An ANN-Based Method to Predict Surface Roughness in Turning Operations ARAPOĞLU R. A., SOFUOĞLU M. A., ORAK S. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , vol.42, no.5, pp.1929-1940, 2017 (SCI-Expanded)
Classification of Breast Masses in Mammograms Using 2D Homomorphic Transform Features and Supervised Classifiers Barkana B. D., SARIÇİÇEK İ. JOURNAL OF MEDICAL IMAGING AND HEALTH INFORMATICS , vol.7, no.7, pp.1566-1571, 2017 (SCI-Expanded)
A mathematical model suggestion for airspace sector design Temizkan S., SİPAHİOĞLU A. JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.31, no.4, pp.913-920, 2016 (SCI-Expanded)
Modeling and analysis of the effects of nano-oil additives on wear properties of AISI 4140 steel material using mixture design BURUK ŞAHİN Y., ÇELİK O. N., Burnak N., AKTAR DEMİRTAŞ E. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY , vol.230, no.4, pp.442-451, 2016 (SCI-Expanded)
A new methodology to cluster derivative product modules: an application Aydin M., Ulutaş B. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH , vol.54, no.23, pp.7091-7099, 2016 (SCI-Expanded)
Two parallel injection machine scheduling under crane constraint Bektur G., SARAÇ T. JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.31, no.4, pp.903-911, 2016 (SCI-Expanded)
Optimization of a biosurfactant production from bacteria isolated from soil and characterization of the surfactant Toptas Y., Celikdemir M., TUNCER C., Sahin Y., AYTAR ÇELİK P., Burnak N., et al. TURKISH JOURNAL OF BIOCHEMISTRY-TURK BIYOKIMYA DERGISI , vol.41, no.5, pp.338-346, 2016 (SCI-Expanded)
A metaheuristic approach for a cubic cell formation problem BURUK ŞAHİN Y., ALPAY Ş. EXPERT SYSTEMS WITH APPLICATIONS , vol.65, pp.40-51, 2016 (SCI-Expanded)
A STATISTICAL EXPERIMENTAL DESIGN TO DETERMINE THE AZO DYE DECOLORIZATION AND DEGRADATION BY THE HETEROGENEOUS FENTON PROCESS AŞÇI Y., AKTAR DEMİRTAŞ E., FİLİK İŞÇEN C., Anagun A. S. FRESENIUS ENVIRONMENTAL BULLETIN , vol.24, pp.3717-3726, 2015 (SCI-Expanded)
Dynamic facility layout problem in footwear industry Ulutaş B., Islier A. A. JOURNAL OF MANUFACTURING SYSTEMS , vol.36, pp.55-61, 2015 (SCI-Expanded)
Effects of Dexterity Level and Hand Anthropometric Dimensions on Smartphone Users' Satisfaction ÖZKAN N. F., GÖKALP YAVUZ F. MOBILE INFORMATION SYSTEMS , vol.2015, 2015 (SCI-Expanded)
Unmanned Aerial Vehicle hub-location and routing for monitoring geographic borders SARIÇİÇEK İ., Akkus Y. APPLIED MATHEMATICAL MODELLING , vol.39, no.14, pp.3939-3953, 2015 (SCI-Expanded)
NEURAL-NETWORK-BASED GENETIC ALGORITHM FOR OPTIMAL KITCHEN FAUCET STYLES Ozsoydan F. B., KANDEMİR C. M., Demirtas E. NEURAL NETWORK WORLD , vol.25, no.4, pp.387-404, 2015 (SCI-Expanded)
Degradation of burazol blue ED by heterogeneous fenton process: simultaneous optimization by central composite design Akay U., Aktar Demirtaş E. DESALINATION AND WATER TREATMENT , vol.56, no.12, pp.3346-3356, 2015 (SCI-Expanded)
A Case Study in Mixture Design: Multi Response Optimization of Glaze Formulation AKTAR DEMİRTAŞ E., Ayva O., BURUK ŞAHİN Y. Quality Engineering , vol.27, no.2, pp.186-195, 2015 (SCI-Expanded)
Laccase production and dye decolorization by Trametes versicolor: application of Taguchi and Box-Behnken Methodologies Gedikli S., AYTAR ÇELİK P., BURUK ŞAHİN Y., APOHAN E., Cabuk A., YEŞİLADA Ö., et al. TURKISH JOURNAL OF BIOCHEMISTRY-TURK BIYOKIMYA DERGISI , vol.39, no.3, pp.298-306, 2014 (SCI-Expanded)
Generalized quadratic multiple knapsack problem and two solution approaches SARAÇ T., SİPAHİOĞLU A. COMPUTERS & OPERATIONS RESEARCH , vol.43, pp.78-89, 2014 (SCI-Expanded)
A Dynamic Path Planning Approach for Multirobot Sensor-Based Coverage Considering Energy Constraints YAZICI A., Kirlik G., PARLAKTUNA O., SİPAHİOĞLU A. IEEE TRANSACTIONS ON CYBERNETICS , vol.44, no.3, pp.305-314, 2014 (SCI-Expanded)
Heuristic solution approaches for the cumulative capacitated vehicle routing problem ÖZSOYDAN F. B., SİPAHİOĞLU A. OPTIMIZATION , vol.62, no.10, pp.1321-1340, 2013 (SCI-Expanded)
U-TYPE ASSEMBLY LINE BALANCING WITH ERGONOMIC FACTORS FOR BALANCE STABILITY GÜNER B., HASGÜL S. JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.27, no.2, pp.407-415, 2012 (SCI-Expanded)
Capacitated arc routing problem with deadheading demands Kirlik G., SİPAHİOĞLU A. COMPUTERS & OPERATIONS RESEARCH , vol.39, no.10, pp.2380-2394, 2012 (SCI-Expanded)
A hybrid genetic algorithm for the single row layout problem ÖZÇELİK F. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH , vol.50, no.20, pp.5872-5886, 2012 (SCI-Expanded)
A genetic algorithm extended modified sub-gradient algorithm for cell formation problem with alternative routings ÖZÇELİK F., SARAÇ T. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH , vol.50, no.15, pp.4025-4037, 2012 (SCI-Expanded)
A genetic algorithm with proper parameters for manufacturing cell formation problems SARAÇ T., ÖZÇELİK F. JOURNAL OF INTELLIGENT MANUFACTURING , vol.23, no.4, pp.1047-1061, 2012 (SCI-Expanded)
Global awareness, future city design and decision making Saaty T. L., SAĞIR M. JOURNAL OF SYSTEMS SCIENCE AND SYSTEMS ENGINEERING , vol.21, no.3, pp.337-355, 2012 (SCI-Expanded)
Lead and nickel biosorption with a dried fungal biomass isolated from lead mine drainage using response surface methodology AYTAR ÇELİK P., Gedikli S., BURUK ŞAHİN Y., ÇABUK A., Burnak N. NEW BIOTECHNOLOGY , vol.29, 2012 (SCI-Expanded)
Generalisation of unidirectional loop layout problem and solution by a genetic algorithm ÖZÇELİK F., Islier A. A. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH , vol.49, no.3, pp.747-764, 2011 (SCI-Expanded)
A two-objective mathematical model without cutting patterns for one-dimensional assortment problems Kasimbeyli N., SARAÇ T., Kasimbeyli R. JOURNAL OF COMPUTATIONAL AND APPLIED MATHEMATICS , vol.235, no.16, pp.4663-4674, 2011 (SCI-Expanded)
A NEW DIAGNOSIS SYSTEM BASED ON FUZZY REASONING TO DETECT MEAN AND/OR VARIANCE SHIFTS IN A PROCESS SARIÇİÇEK İ., Cimen O. INTERNATIONAL JOURNAL OF INNOVATIVE COMPUTING INFORMATION AND CONTROL , vol.7, no.12, pp.6935-6948, 2011 (SCI-Expanded)
A Data Envelopment-Based Clustering Approach for Public Sugar Factories in Privatizing Process AKTAR DEMİRTAŞ E. MATHEMATICAL PROBLEMS IN ENGINEERING , vol.2011, 2011 (SCI-Expanded)
Two meta-heuristics for parallel machine scheduling with job splitting to minimize total tardiness SARIÇİÇEK İ., Celik C. APPLIED MATHEMATICAL MODELLING , vol.35, no.8, pp.4117-4126, 2011 (SCI-Expanded)
AN AUTOMATED MULTI-OBJECTIVE INVIGILATOR-EXAM ASSIGNMENT SYSTEM KAMIŞLI ÖZTÜRK Z., ÖZTÜRK G., SAĞIR M. INTERNATIONAL JOURNAL OF INFORMATION TECHNOLOGY & DECISION MAKING , vol.9, no.2, pp.223-238, 2010 (SCI-Expanded)
A novel attribute-based dynamic content area layout for internet newspapers Ulutaş B., Islier A. A. INTERNET RESEARCH , vol.20, no.2, pp.135-153, 2010 (SCI-Expanded)
Exam scheduling: Mathematical modeling and parameter estimation with the Analytic Network Process approach SAĞIR M., KAMIŞLI ÖZTÜRK Z. MATHEMATICAL AND COMPUTER MODELLING , vol.52, pp.930-941, 2010 (SCI-Expanded)
Energy constrained multi-robot sensor-based coverage path planning using capacitated arc routing approach SİPAHİOĞLU A., Kirlik G., PARLAKTUNA O., YAZICI A. ROBOTICS AND AUTONOMOUS SYSTEMS , vol.58, no.5, pp.529-538, 2010 (SCI-Expanded)
Ordering of regions in Turkey according to their potential to increase female labor force: A multi-criterion decision making model application PARLAKTUNA İ., SARIÇİÇEK İ. IKTISAT ISLETME VE FINANS , vol.25, no.294, pp.35-65, 2010 (SSCI)
GRASP with path relinking for a multiple objective sequencing problem for a mixed-model assembly line ALPAY Ş. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH , vol.47, no.21, pp.6001-6017, 2009 (SCI-Expanded)
Dynamic job shop scheduling for missed due date performance ALPAY Ş., Yuzugullu N. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH , vol.47, no.15, pp.4047-4062, 2009 (SCI-Expanded)
Underground mining method selection by decision making tools ALPAY Ş., YAVUZ M. TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY , vol.24, no.2, pp.173-184, 2009 (SCI-Expanded)
An essay on rank preservation and reversal Saaty T. L., Sağır M. MATHEMATICAL AND COMPUTER MODELLING , vol.49, pp.1230-1243, 2009 (SCI-Expanded)
The Performance of the Modified Subgradient Algorithm on Solving the 0-1 Quadratic Knapsack Problem SİPAHİOĞLU A., SARAÇ T. INFORMATICA , vol.20, no.2, pp.293-304, 2009 (SCI-Expanded)
A clonal selection algorithm for dynamic facility layout problems Ulutaş B., Islier A. A. JOURNAL OF MANUFACTURING SYSTEMS , vol.28, pp.123-131, 2009 (SCI-Expanded)
Analytic network process and multi-period goal programming integration in purchasing decisions AKTAR DEMİRTAŞ E., Ustun O. COMPUTERS & INDUSTRIAL ENGINEERING , vol.56, no.2, pp.677-690, 2009 (SCI-Expanded)
Determination of optimal product styles by ordinal logistic regression versus conjoint analysis for kitchen faucets AKTAR DEMİRTAŞ E., Anagun A. S., KÖKSAL G. INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS , vol.39, no.5, pp.866-875, 2009 (SCI-Expanded)
Heuristic-Based Dynamic Route Planning Method for a Homogeneous Multi-robot Team YAZICI A., SİPAHİOĞLU A., PARLAKTUNA O. ADVANCED ROBOTICS , vol.23, no.3, pp.269-287, 2009 (SCI-Expanded)
Project-oriented task scheduling for mobile robot team HASGÜL S., SARIÇİÇEK İ., ÖZKAN M., PARLAKTUNA O. JOURNAL OF INTELLIGENT MANUFACTURING , vol.20, no.2, pp.151-158, 2009 (SCI-Expanded)
EXTENDING THE MEASUREMENT OF TANGIBLES TO INTANGIBLES Saaty T. L., SAĞIR M. INTERNATIONAL JOURNAL OF INFORMATION TECHNOLOGY & DECISION MAKING , vol.8, no.1, pp.7-27, 2009 (SCI-Expanded)
Rebuttal of "Choosing a municipal landfill site by analytic network process" by M. Banar, BM Kose, A. Ozkan, IP Acar (Published in Volume 52, Number 4, April 2007, pp. 747-751) SAĞIR M. ENVIRONMENTAL GEOLOGY , vol.57, no.4, pp.953-956, 2009 (SCI-Expanded)
Rebuttal of the "Comments on the answers for the Rebuttal of -Choosing a municipal landfill site by analytic network process" SAĞIR M. ENVIRONMENTAL EARTH SCIENCES , vol.59, no.3, pp.715-716, 2009 (SCI-Expanded)
Real-time tour construction for a mobile robot in a dynamic environment SİPAHİOĞLU A., YAZICI A., PARLAKTUNA O., GÜREL U. ROBOTICS AND AUTONOMOUS SYSTEMS , vol.56, no.4, pp.289-295, 2008 (SCI-Expanded)
Multi-period lot-sizing with supplier selection using achievement scalarizing functions Ustun O., AKTAR DEMİRTAŞ E. COMPUTERS & INDUSTRIAL ENGINEERING , vol.54, no.4, pp.918-931, 2008 (SCI-Expanded)
A VRP-based route planning for a mobile robot group PARLAKTUNA O., SİPAHİOĞLU A., YAZICI A. Turkish Journal of Electrical Engineering and Computer Sciences , vol.15, no.2, pp.187-197, 2007 (SCI-Expanded)
A multi-objective programming approach to 1.5-dimensional assortment problem Gasimov R. N., SİPAHİOĞLU A., Sarac T. EUROPEAN JOURNAL OF OPERATIONAL RESEARCH , vol.179, no.1, pp.64-79, 2007 (SCI-Expanded)
A multiobjective faculty-course-time slot assignment problem with preferences Ismayilova N. A., SAĞIR M., Gasimov R. N. MATHEMATICAL AND COMPUTER MODELLING , vol.46, pp.1017-1029, 2007 (SCI-Expanded)
Unidirectional loop layout problem with balanced flow ÖZÇELİK F., Islier A. A. ADVANCES IN APPLIED ARTIFICIAL INTELLIGENCE, PROCEEDINGS , vol.4031, pp.741-749, 2006 (SCI-Expanded)
Priority-constrained task sequencing for heterogeneous mobile robots Ozkan M., SARIÇİÇEK İ., Parlaktuna O., HASGÜL S. ADVANCES IN APPLIED ARTIFICIAL INTELLIGENCE, PROCEEDINGS , vol.4031, pp.393-399, 2006 (SCI-Expanded)
Optimization of genetic algorithm parameters for multi-channel manufacturing systems by Taguchi method Anagun A., ÖZÇELİK F. AI 2005: ADVANCES IN ARTIFICIAL INTELLIGENCE , vol.3809, pp.1021-1024, 2005 (SCI-Expanded)
The analytic hierarchy process and multiobjective 0-1 faculty course assignment Ozdemir M., Gasimov R. EUROPEAN JOURNAL OF OPERATIONAL RESEARCH , vol.157, no.2, pp.398-408, 2004 (SCI-Expanded)
Why the magic number seven plus or minus two Saaty T., Ozdemir M. MATHEMATICAL AND COMPUTER MODELLING , vol.38, pp.233-244, 2003 (SCI-Expanded)
Novel approach to multi-channel manufacturing system design ÖZÇELİK F., Islier A. INTERNATIONAL JOURNAL OF PRODUCTION RESEARCH , vol.41, no.12, pp.2711-2726, 2003 (SCI-Expanded)
Integrated facilities design using a contour distance metric Norman B., ARAPOĞLU R. A., Smith A. IIE TRANSACTIONS , vol.33, no.4, pp.337-344, 2001 (SCI-Expanded)
Locating input and output points in facilities design - A comparison of constructive, evolutionary, and exact methods ARAPOĞLU R. A., Norman B., Smith A. IEEE TRANSACTIONS ON EVOLUTIONARY COMPUTATION , vol.5, no.3, pp.192-203, 2001 (SCI-Expanded)
Articles Published in Other Journals
DMAIC Cycle for the New Product Launch Process: FMEA and DOE Applications for Built-In Oven DEMİRTAŞ E. A., KOSTUR G. Y., KARA M. E. Verimlilik Dergisi , vol.58, no.1, pp.29-44, 2024 (Peer-Reviewed Journal)
Column generation approach for 1.5-dimensional cutting stock problem with technical constraints SAĞIR M., SARAÇ T. Mathematical Modelling and Numerical Simulation with Applications , vol.4, no.3, pp.335-350, 2024 (Peer-Reviewed Journal)
INVESTIGATION OF THE EFFECT OF SPEED CHANGE IN MACHINES ON SUSTAINABILITY: A MATHEMATICAL MODEL ÖZÇELİK F., SARAÇ T., ERTEM M. Endüstri Mühendisliği , vol.35, no.1, pp.115-135, 2024 (Peer-Reviewed Journal)
ASSESSING THE UNIVERSITY ON-CAMPUS TRANSPORT MODES: A PRELIMINARY STUDY Keleş F., Özgül H., Haktanirlar Ulutas B. Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online) , vol.32, no.1, pp.1118-1129, 2024 (Peer-Reviewed Journal)
STOKASTİK TALEPLİ VE ÇOK PERİYOTLU EVDE SAĞLIK HİZMETLERİNİN PLANLANMASI PROBLEMİ Saraç T., Tükenmez İ., Tutumlu B. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi , vol.29, no.1, pp.1-18, 2024 (Peer-Reviewed Journal)
Stochastic Bottleneck Multi-Resource Generalized Assignment Problem SARAÇ T., ÖZÇELİK F. JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , vol.27, pp.769-775, 2024 (ESCI)
DİYALİZ MERKEZLERİNDE SEANS ÇİZELGELEMESİ İÇİN BİR YAKLAŞIM ÖNERİSİ VE KARAR DESTEK SİSTEMİ Günesen Akansu B. Doğuş Üniversitesi Dergisi , vol.25, no.1, pp.171-181, 2024 (Peer-Reviewed Journal)
EVALUATION OF ENERGY CONSUMPTION WITH PHYSICAL WORKLOAD DETECTED BY ERGONOMIC RISK ASSESSMENT METHODS KAHYA E., ÖZGEN C., JORAYEVA N. Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online) , vol.32, no.2, pp.1315-1325, 2024 (Peer-Reviewed Journal)
A GENETIC ALGORITHM FOR THE PARALLEL MACHINE SCHEDULING PROBLEM WITH STOCHASTIC DUE DATES ÖZÇELİK F., SARAÇ T. Endüstri Mühendisliği , vol.35, no.2, pp.189-209, 2024 (Peer-Reviewed Journal)
Optimal defense strategies against intelligent cyber attacks ERTEM M., Bier V. Journal of innovative engineering and natural science (Online) , vol.4, no.1, pp.245-262, 2024 (Peer-Reviewed Journal)
A simulated annealing algorithm for the faculty-level university course timetabling problem Akbulut H. E., ÖZÇELİK F., SARAÇ T. PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , no.1, pp.17-30, 2024 (ESCI)
İKİ BOYUTLU KESME PROBLEMİ İÇİN YENİ KARMA TAMSAYILI DOĞRUSAL PROGRAMLAMA MODELLERİ Tutumlu B., Tunçer G., Saraç T. Eskişehir Osmangazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , vol.32, no.1, pp.1130-1139, 2024 (Peer-Reviewed Journal)
INPUT SELECTION THROUGH CORRELATION-HYPOTHESIS TESTING BASED FILTERING IN ANN CLASSIFICATION MODELS Uluskan M., ŞENLİ H. D. Nicel bilimler dergisi (Online) , vol.6, no.1, pp.68-102, 2024 (Peer-Reviewed Journal)
A MATHEMATICAL MODEL FOR THE TYPE-II ASSEMBLY LINE BALANCING PROBLEM WITH HIERARCHİCAL WORKER ASSIGNMENT Karaş Çelik A., Özçelik F. Endüstri Mühendisliği , vol.35, no.1, pp.1-21, 2024 (Peer-Reviewed Journal)
Solving a Cubic Cell Formation Problem with Quality Index Using a Hybrid Meta-Heuristic Approach URAZEL B., ŞAHİN Y. B. GAZI UNIVERSITY JOURNAL OF SCIENCE , vol.36, no.2, pp.752-771, 2023 (Scopus)
A Hybrid Algorithm for Flow Shop Scheduling Problem with Unavailable Time Periods and Additional Resources ÖZÇELİK F., SARAÇ T. Gazi University Journal of Science , vol.36, no.4, pp.1563-1576, 2023 (ESCI)
TEKNOLOJİK GELİŞMELER IŞIĞINDA ENDÜSTRİ MÜHENDİSLİĞİNİN GELECEĞİ Aktar Demirtaş E., Sağır M., Alpay Ş., Özkan N. F., Hasgül S., Sipahioğlu A. Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online) , vol.31, no.4, pp.1094-1111, 2023 (Peer-Reviewed Journal)
A Mixed-Integer Linear Programming Model for Conflict Resolution Using Airspace Discretization Technique in a Generic Free Route Airspace Kaplan Z., Cetek C., SARAÇ T. JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , 2023 (ESCI)
A HYBRID MODIFIED SUBGRADIENT ALGORITHM THAT SELF-DETERMINES THE PROPER PARAMETER VALUES SARAÇ T., TUTUMLU B., ÖZER E. A. Journal of scientific reports-A (Online) , no.052, pp.190-199, 2023 (Peer-Reviewed Journal)
Efficiency analysis of OECD countries during COVID-19 pandemic using multi-stage DEA Kıdak Ş. M., Arapoğlu R. A., Aktar Demirtaş E. PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , vol.29, no.5, pp.426-439, 2023 (ESCI)
PARALEL İŞLEMCİLİ ESNEK AKIŞ ATÖLYESİ ÇİZELGELEME PROBLEMLERİ İÇİN STOKASTİK ÇÖZÜM YAKLAŞIMI Ertem M., Sağır M. Endüstri Mühendisliği , vol.34, pp.69-90, 2023 (Peer-Reviewed Journal)
İki amaçlı çok sıralı yerleşim problemi için bir diferansiyel evrim algoritması Çimen Ünlükal E., Özçelik F. Endüstri Mühendisliği , vol.34, no.2, pp.201-219, 2023 (Peer-Reviewed Journal)
Using Problem-Based Learning (PBL) in an Undergraduate Ergonomics Course ULUTAŞ B. Journal of Problem Based Learning in Higher Education , vol.11, pp.90-104, 2023 (Scopus)
Bozulma Etkili ve Tek Bakım Ekipli Bakım Çizelgeleme Problemi İçin Bir Matematiksel Model Saraç T., Özçelik F. Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online) , vol.31, no.3, pp.882-892, 2023 (Peer-Reviewed Journal)
PARAMETER-LESS AND METAPHOR-LESS METAHEURISTIC ALGORITHM SUGGESTION FOR SOLVING COMBINATORIAL OPTIMIZATION PROBLEMS Altın İ., Sipahioğlu A. Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online) , vol.31, no.1, pp.599-609, 2023 (Peer-Reviewed Journal)
Çapraz Sevkiyatta İşçi Sayısına Bağlı Yükleme ve Boşaltma Sürelerinin Olduğu Kapı Atama Problemi Özçelik F., Saraç T., Öz M. C. Endüstri Mühendisliği , vol.34, no.3, pp.311-333, 2023 (Peer-Reviewed Journal)
Structural equation modelling – artificial neural network based hybrid approach for assessing quality of university cafeteria services ULUSKAN M. TQM Journal , vol.35, no.4, pp.1048-1071, 2023 (ESCI)
Evaluation of the Performance of Private Universities With AHP, COPRAS, SAW, TOPSIS and Borda Count Methods Uluskan M., Akpolat G., Şimşek D. Journal of Industrial Engineering , vol.33, no.1, pp.22-61, 2022 (Peer-Reviewed Journal)
Parallel Machine Scheduling Problem with Unavailable Time Periods and Sequence Dependent Setup Times Özçelik F., Saraç T. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji , vol.10, no.3, pp.588-600, 2022 (Peer-Reviewed Journal)
DERİN ÖĞRENME YÖNTEMLERİYLE SÜRÜCÜ YORGUNLUK TESPİTİ: BİR UYGULAMA ÖZKAN N. F., ULUTAŞ B., YETKİN B. N. International Journal on Mathematic, Engineering and Natural Sciences , vol.6, no.21, pp.212-223, 2022 (Peer-Reviewed Journal)
Teaching and assessing strategies for an undergraduate manufacturing processes course: Experiences of 9 years ULUTAŞ B. International Journal of Mechanical Engineering Education , vol.50, no.4, pp.902-922, 2022 (ESCI)
Mavi yaka performans degerlendirmesinde kullanilacak olcutlerin belirlenmesi icin AHP temelli bir matematiksel model - An AHP based mathematical model to determine the criteria used in the worker performance evaluation Tutumlu B., Saraç T., Sağır M. PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , vol.28, pp.173-182, 2022 (ESCI)
Supplier Evaluation Through AHP, Fuzzy Ahp, LBWA and COPRAS Methods: An Application in the Railway Industry Uluskan M., Topuz D., Çimen C. Journal of Engineering and Architecture Faculty of Eskisehir Osmangazi University , vol.30, no.3, pp.412-430, 2022 (Peer-Reviewed Journal)
Using attack graphs to defend healthcare systems from cyberattacks: a longitudinal empirical study Unozkan H., Ertem M., Bendak S. NETWORK MODELING AND ANALYSIS IN HEALTH INFORMATICS AND BIOINFORMATICS , vol.11, no.1, 2022 (ESCI)
A GENETIC ALGORITHM FOR THE PROBLEM OF ASSIGNING CASTING MOLDS TO CASTING MACHINES İzci E., Karabulut N., Saraç T. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi , vol.30, no.1, pp.7-15, 2022 (Peer-Reviewed Journal)
Impact Of Supplier Selection On Final Product Quality: A Structural Equation Modeling Analysis Uluskan M., Akın Ş. Journal of Industrial Engineering , vol.33, no.3, pp.452-468, 2022 (Peer-Reviewed Journal)
Bir Savunma Sanayi Firmasında Depo Bölgesi Atama Sisteminin Veri Madenciliği ve Makine Öğrenme Yaklaşımlarıyla İyileştirilmesi Ertem M. Avrupa Bilim ve Teknoloji Dergisi , no.34, 2022 (Peer-Reviewed Journal)
Assessing the efficiency of airports by considering health and safety issues: A pilot study for Turkey USTAEL B., ULUTAŞ B. JOURNAL OF AIRLINE AND AIRPORT MANAGEMENT , vol.12, no.2, pp.49-68, 2022 (Peer-Reviewed Journal)
A course scheduling model based on academic title-based preferences and deviations- a case study of industrial engineering department TÜKENMEZ İ., BURUK ŞAHİN Y. PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , vol.28, no.4, pp.547-558, 2022 (ESCI)
Stokastik İlişkisiz Paralel Makine Çizelgeleme Problemi için bir Matematiksel Model Ertem M., Özçelik F., Saraç T. Avrupa Bilim ve Teknoloji Dergisi , vol.29, pp.278-283, 2021 (Peer-Reviewed Journal)
Six Sigma In Plastic Injection Molding: Reuse Defective Parts In New Article Production As Raw Material Input Or Not? ULUSKAN M. Journal of Industrial Engineering , vol.32, no.2, pp.341-363, 2021 (Peer-Reviewed Journal)
BAKIM FAALİYETLERİNİ DİKKATE ALAN MAKİNE ÇİZELGELEME: LİTERATÜR ARAŞTIRMASI DÜNDAR D. R., SARIÇİÇEK İ., YAZICI A. Uludağ University Journal of The Faculty of Engineering , vol.26, no.2, pp.737-756, 2021 (Peer-Reviewed Journal)
ÜÇ BOYUTLU HÜCRE OLUŞTURMA PROBLEMİNE ÇOK AMAÇLI BİR ÇÖZÜM YAKLAŞIMI ÖZÇELİK F., SARAÇ T. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi , vol.29, no.2, pp.182-188, 2021 (Peer-Reviewed Journal)
Improving Service Bus Routes for Patient Ergonomics Günesen B., Kapanoğlu M. Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi , vol.13, no.3, pp.98-108, 2021 (Peer-Reviewed Journal)
OTOMOTİV SEKTÖRÜNDE KAİZEN YÖNTEMİ İLE TESİS YERLEŞİM TASARIMI VE REBA ANALİZİ ULUSKAN M., ÖZYALINER M. T. Journal of Engineering and Architecture Faculty of Eskişehir Osmangazi University , vol.29, no.1, pp.1-19, 2021 (Peer-Reviewed Journal)
Decreasing Defects in Plastic Injection Molding and Vibration Welding Processes Through Statistical Process Control ULUSKAN M. Open Journal of Nano , vol.6, no.2, pp.7-18, 2021 (Peer-Reviewed Journal)
İki Amaçlı Çoklu Gezgin Satıcı Problemi için Üç Aşamalı Çözüm Yaklaşımı Günesen B., Kapanoğlu M. Avrupa Bilim ve Teknoloji Dergisi , no.26, pp.325-331, 2021 (Peer-Reviewed Journal)
EVALUATION OF JEPPESEN AND GARMIN ELECTRONIC FLIGHT BAGS (EFBs) APPLICATIONS IN TERMS OF COGNITIVE WORKLOAD AND AVAILABILITY ÖZKAN N. F., AKSOY E., Şensoy G. International Journal of Multidisciplinary Studies and Innovative Technologies , vol.5, no.1, pp.36-45, 2021 (Peer-Reviewed Journal)
KESTİRİMCİ BAKIMDA MAKİNE ÖĞRENMESİ: LİTERATÜR ARAŞTIRMASI Dündar D. R., ÇİNAR E., SARIÇİÇEK İ., YAZICI A. Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online) , vol.29, no.2, pp.256-276, 2021 (Peer-Reviewed Journal)
Büyük Ölçekli Bir Üretim İşletmesinin Ofislerinde Risk Değerlendirmesi. KAHYA E., ADA G., ÇETİNKAYA Ö. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi , vol.29, no.1, pp.97-109, 2021 (Peer-Reviewed Journal)
Comparison of Three Travel Websites According to Cognitive Load and Usability Metrics YETKİN B. N., ÖZKAN N. F., Sert M., Yücel G. International Journal of Multidisciplinary Studies and Innovative Technologies , vol.5, no.1, pp.30-35, 2021 (Peer-Reviewed Journal)
BİR İPLİK FABRİKASINDA SİPARİŞLERİN ÇİZELGELENMESİ Şenbay Ç., Saraç T., Aktar Demirtaş E. Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online) , vol.29, no.1, pp.64-75, 2021 (Peer-Reviewed Journal)
Genetik Algoritma ile Eş Zamanlı Topla-Dağıt Araç Rotalama: İstanbul Anadolu Yakası için Bir Uygulama BOZKURT KESER S., TOPRAK A., CİĞER F. E., DEMİRÖZ M., SARIÇİÇEK İ. Journal of the Institute of Science and Technology , vol.11, no.3, pp.1686-1699, 2021 (Peer-Reviewed Journal)
Uygunluk Kısıtlı Çok Kaynaklı Genelleştirilmiş Atama Problemi İçin Bir Tavlama Benzetimi Algoritması Erten K., SARAÇ T., ÖZÇELİK F. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji , vol.9, no.3, pp.385-401, 2021 (Peer-Reviewed Journal)
Endüstri Mühendisliği Öğrencilerinin Uzaktan Eğitim Memnuniyetini Etkileyen Faktörlerin Yapısal Eşitlik Modeli İle İncelenmesi ULUSKAN M., DURAL G., CİNKARA H. Journal of Engineering and Architecture Faculty of Eskişehir Osmangazi University , vol.29, no.3, pp.356-380, 2021 (Peer-Reviewed Journal)
Ergonomik Montaj Hattı Dengeleme Problemine Farklı Çözüm Yaklaşımları KAHYA E., YETKİN B. N. Endüstri Mühendisliği , vol.32, no.2, pp.217-234, 2021 (Peer-Reviewed Journal)
RESTRICTED ENUMERATION AND MACHINE GROUPING BASED APPROACH FOR HYBRID FLEXIBLE FLOW SHOP SCHEDULING PROBLEMS WITH SEQUENCE-DEPENDENT SETUP TIMES Sağır M., Okul H. D. Endüstri Mühendisliği , vol.31, no.3, pp.337-352, 2020 (Peer-Reviewed Journal)
İşçilerin Sağlık ve Yetenek Seviyelerine Göre İş İstasyonlarına Kısmi ya da Tam Kapasiteli Olarak Atanması Problemi İçin Bir Çözüm Yaklaşımı TUTUMLU B., Aygün B., SARAÇ T. Endüstri Mühendisliği , vol.31, no.1, pp.18-27, 2020 (Peer-Reviewed Journal)
The effect of dynamic penalty function on solution of quadratic knapsack problem with simulated annealing algorithm SİPAHİOĞLU A., ALTIN İ. Applied Analysis and Optimization , vol.4, no.2, pp.257-271, 2020 (Peer-Reviewed Journal)
Bees algorithm for cubic cell formation problem Gokdas H., ÖZÇELİK F. PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , vol.26, no.4, pp.812-822, 2020 (ESCI)
Bir Metal Sanayi İşletmesinde Fiziksel Zorlanmaların Kas İskelet Sistemi Rahatsızlıklarına Etkisi KAHYA E. Endüstri Mühendisliği , vol.31, no.2, pp.148-158, 2020 (Peer-Reviewed Journal)
A goal programming model for the make-up/compensation examination problem SARAÇ T., ÖZÇELİK F., ERDOĞAN H. PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , vol.26, no.1, pp.203-210, 2020 (ESCI)
Ölçüm Cihazlarına Ait Kalibrasyon Periyotları İçin Risk Analizi İncelemesi Ve Karar Destek Sistemi Tasarımı ULUSKAN M., Böcü Y. Journal of Engineering and Architecture Faculty of Eskisehir Osmangazi University , vol.28, no.2, pp.174-193, 2020 (Peer-Reviewed Journal)
Work-Related Injuries And Exposures Among Emergency Medical Service Personnel Due To Interior Design Of Ambulance KAHYA E., Sakarya S., Özkan H., ANIK N. ESTÜDAM Halk Sağlığı Dergisi , vol.5, no.2, pp.257-269, 2020 (Peer-Reviewed Journal)
Mazeret/Telafi Sinavi Cizelgeleme Problemi icin Bir Hedef Programlama Modeli SARAÇ T., ÖZÇELİK F., ERDOĞAN AKBULUT H. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi , vol.26, no.1, pp.203-210, 2020 (ESCI)
A thorough Six Sigma DMAIC application for household appliance manufacturing systems Oven door-panel alignment case ULUSKAN M., ODA E. P. The TQM Journal , vol.32, no.6, pp.1683-1714, 2020 (Scopus)
Culture versus Policy: More Global Collaboration to Effectively Combat COVID-19 Li J., Kun G., Enrique Herrera V., Heesoek L., Jiming L., Ning Z., et al. The Innovation , vol.1, no.2, pp.1-2, 2020 (Scopus)
FRACTAL OFFICE LAYOUT BY CONSIDERING ERGONOMICS Özkan N. F., Ulutaş B. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi , vol.28, no.1, pp.21-32, 2020 (Peer-Reviewed Journal)
A DECISION SUPPORT SYSTEM FOR CROSS-DOCKING CENTERS WITH DIFFERENT OBJECTIVES ÖZDEN G., SARIÇİÇEK İ. SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI , vol.38, no.1, pp.421-440, 2020 (ESCI)
Seramik Sektöründe Kojenerasyon Tesisleri İle Elektrik Üretim Kararı İçin Karar Destek Sistemi ULUSKAN M., Azman B., Kara A., Alptekin K. Journal of Industrial Engineering , vol.31, no.3, pp.281-319, 2020 (Peer-Reviewed Journal)
Çok Amaçlı Permütasyon Akış Tipi Çizelgeleme Problemi için bir NSGA-II Algoritması SARAÇ T., Doğan N. Endüstri Mühendisliği , vol.31, no.2, pp.105-121, 2020 (Peer-Reviewed Journal)
Ambulans Çalışanlarının Kas İskelet Sistemi Rahatsızlıklarının Değerlendirilmesi KAHYA E., Sakarya S. Ergoterapi ve Rehabilitasyon Dergisi , vol.8, no.2, pp.99-106, 2020 (Peer-Reviewed Journal)
Endüstri Mühendisliği Eğitimi ve Endüstri 4.0 İlişkisinin ESOGU Endüstri Mühendisliği Öğrencileri Bakışıyla Analizi SERTEL E., BURUK ŞAHİN Y., İşlier A. Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi , vol.12, no.1, pp.236-250, 2020 (Peer-Reviewed Journal)
A systematic approach to assess visual inspection tasks: an assembly line case Tuncer M. C., Özkan N. F., Ulutaş B. INTERNATIONAL JOURNAL OF PRODUCTIVITY AND QUALITY MANAGEMENT , vol.29, no.3, pp.418-438, 2020 (Scopus)
MULTI-OBJECTIVE SCHEDULING BY MAXIMIZING MACHINE PREFERENCES FOR UNRELATED PARALLEL MACHINES SARIÇİÇEK İ. SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI , vol.38, no.1, pp.405-420, 2020 (ESCI)
Bir Makine Fabrikasında Yarı Mamul Depolama Sistemi için EtkinRaf Yerleşimi Önerisi BURUK ŞAHİN Y., EKMEKÇİ S., YÜREKLİ M. Avrupa Bilim ve Teknoloji Dergisi , no.18, pp.664-674, 2020 (Peer-Reviewed Journal)
Eğitim Sektöründe Faktör Analizi Tabanlı Hizmet Kalitesi Ölçümü Ve Kalite Fonksiyon Yayılımı Uygulaması Uluskan M., Çendik İ. Endüstri Mühendisliği , vol.31, no.2, pp.122-147, 2020 (Peer-Reviewed Journal)
Seramik Sektöründe Çevre Koşullarının Analizi KAHYA E. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi , vol.28, no.2, pp.136-142, 2020 (Peer-Reviewed Journal)
İÇ LOJİSTİKTE OTONOM ROBOTLAR İÇİN GÖREV PLANLAMASI BOZKURT KESER S., SARIÇİÇEK İ., YAZICI A. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi , vol.28, no.2, pp.94-106, 2020 (Peer-Reviewed Journal)
Performance Evaluation of Istanbul Metrobus System Through Data Envelopment Analysis Aktar Demirtaş E., Acar R. TRANSPORTATION IN DEVELOPING ECONOMIES , vol.6, no.2, 2020 (ESCI)
BİR OLUKLU MUKAVVA KUTU FABRİKASINDA STANDART BOBİN ENLERİNİN BELİRLENMESİ SARAÇ T., SAĞIR M. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi , vol.27, no.1, pp.47-59, 2019 (Peer-Reviewed Journal)
METAL ENDÜSTRİSİNDE KİŞİSEL KORUYUCU DONANIM KULLANIMININ ANALİZİ Kahya E., Ulutaş B., Özkan N. F. Selcuk University Journal of Engineering ,Science and Technology , vol.7, no.2, pp.420-433, 2019 (Peer-Reviewed Journal)
THE EFFECTS OF ENVIRONMENTAL FACTORS ON JOB PERFORMANCE IN METAL INDUSTRY Kahya E., Ulutaş B., Özkan N. F. Journal of Industrial Engineering , vol.30, no.1, pp.1-14, 2019 (Peer-Reviewed Journal)
Demontaj hattı dengeleme problemi için ELECTRE’ye dayalı bir çözüm yaklaşımı önerisi DENİZ N., ÖZÇELİK F. Alphanumeric Journal , vol.7, no.2, pp.399-416, 2019 (Peer-Reviewed Journal)
KAPASİTE KISITLI ESNEK ATÖLYE TİPİ ÇİZELGELEME PROBLEMİ İÇİN ÜÇ AŞAMALI BİR ÇÖZÜM YAKLAŞIMI VE BİR İŞLETMEDE UYGULANMASI Karabulut M. A., SARAÇ T. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi , vol.27, no.3, pp.233-241, 2019 (Peer-Reviewed Journal)
SOLUCAN GÜBRESİ ÜRETİM TESİSİ İÇİN BİR KARAR DESTEK SİSTEMİ ÖZEN İ., ŞİMŞEK Z. C., ÖZÇELİK F., SARAÇ T. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi , vol.27, no.2, pp.85-92, 2019 (Peer-Reviewed Journal)
USING FUZZY TOPSIS AND REGRESSION BASED WEIGHTS TO RANK E-COMMERCE WEBSITES ÖZKAN N. F., GÖKALP YAVUZ F. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi , vol.27, no.2, pp.116-124, 2019 (Peer-Reviewed Journal)
Solution approaches for truck scheduling problem in cross-docking Özden G., Sarıçiçek İ. PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , vol.25, no.1, pp.82-88, 2019 (ESCI)
Karar Destek Sistemi Tabanlı bir Kalite Evi için Oransal bir Ölçek Önerisi BURUK ŞAHİN Y., AKTAR DEMİRTAŞ E. journal of industrial engineering , vol.30, no.3, pp.173-186, 2019 (Peer-Reviewed Journal)
A Wage Scheme Based on Job and Performance Evaluations KAHYA E. Journal of Industrial Engineering , vol.30, no.3, pp.187-203, 2019 (Peer-Reviewed Journal)
SERAMİK SEKTÖRÜNDE TAŞIMA İŞLEMLERİNDE ERGONOMİK RİSK ANALİZİ KAHYA E., ÇİÇEK E. Ergoterapi ve Rehabilitasyon Dergisi , vol.7, no.1, pp.47-58, 2019 (Peer-Reviewed Journal)
A mathematical model for in-plant Milk-Run routing SİPAHİOĞLU A., ALTIN İ. PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , vol.25, no.9, pp.1050-1055, 2019 (ESCI)
A NEW MATHEMATICAL MODEL AND RANDOM KEY BASED METAHEURISTIC SOLUTION APPROACH FOR COURSE-ROOM-TIME ASSIGNMENT PROBLEM KAMIŞLI ÖZTÜRK Z., SAĞIR M. Journal of Engineering and Architecture Faculty of Eskisehir Osmangazi University , vol.2, no.2, pp.67-76, 2019 (Peer-Reviewed Journal)
SÜREÇ YETERLİLİK ANALİZİNİN GENİŞLETİLMİŞ KAİZEN YÖNTEMİNE ENTEGRASYONU: OTOMOTİV SEKTÖRÜNDE BİR UYGULAMA ULUSKAN M. Journal of Engineering and Architecture Faculty of Eskisehir Osmangazi University , vol.27, no.3, pp.165-183, 2019 (Peer-Reviewed Journal)
A New Mathematical Model for the Integrated Solution of Cell Formation and Part Scheduling Problem Buruk Şahin Y., Alpay Ş. GAZI UNIVERSITY JOURNAL OF SCIENCE , vol.32, no.4, pp.1196-1210, 2019 (ESCI)
ERGONOMİK MONTAJ HATTI DENGELEME İÇİN YENİ BİR MODEL ÖNERİSİ KAHYA E., ŞAHİN B. N. Mühendislik Bilimleri ve Tasarım Dergisi , vol.7, no.4, pp.767-778, 2019 (Peer-Reviewed Journal)
A COMBINED MATHEMATICAL MODELING AND ANALYTIC HIERARCHY PROCESSAPPROACH FOR SPORTS SCHEDULING PROBLEMS SAĞIR M., Abdul HAMID N. H., KENDALL G. Journal of Industrial Engineering , vol.30, no.2, pp.111-122, 2019 (Peer-Reviewed Journal)
JANT SEKTÖRÜNDE QEC ve REBA YÖNTEMLERİYLE ERGONOMİK RİSK DEĞERLENDİRMESİ KAHYA E., Sema S. Karaelmas İş Sağlığı ve Güvenliği Dergisi , vol.3, pp.83-96, 2019 (Peer-Reviewed Journal)
Soba Montaj Hattında Ergonomik Risk Değerlendirmesi Kahya E., Acar Ş. B., Şahin D., Sarıçiçek İ. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi , vol.27, no.1, pp.21-39, 2019 (Peer-Reviewed Journal)
Toplam Ekipman Etkinliğini İyileştirmede TRIZ Kullanımı: Bir Uygulama ÖZKAN N. F., Ada E. C., Genlik S. Verimlilik Dergisi , vol.2019, no.2, pp.169-184, 2019 (Peer-Reviewed Journal)
Improving healthcare service processes by lean thinking DENİZ N., ÖZÇELİK F. PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , vol.24, no.4, pp.739-748, 2018 (ESCI)
HEDEF PROGRAMLAMA MODELİ İLE ERGONOMİK KISITLAR ALTINDA MONTAJ HATTI DENGELEMESİ ŞAHİN B. N., KAHYA E. Mühendislik Bilimleri ve Tasarımı Dergisi , vol.6, pp.188-196, 2018 (Peer-Reviewed Journal)
Evaluation Of The Classroom Furniture For University Students KAHYA E. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi , vol.26, no.1, pp.20-29, 2018 (Peer-Reviewed Journal)
THE EFFECTS OF INTERPERSONAL AFFECT AND OPPORTUNİTY TO OBSERVE ON RATINGS IN MULTI-SOURCE ASSESSMENT PROCESS. KAHYA E. Süleyman Demirel Üniversitesi İktisadi ve İdari Bilimler Fakültesi Dergisi , vol.23, no.4, pp.1505-1519, 2018 (Peer-Reviewed Journal)
ANALYSIS OF ENVIRONMENTAL CONDITIONS IN METAL INDUSTRY Kahya E., Ulutaş B., Özkan N. F. Mühendislik Bilimleri ve Tasarım Dergisi , vol.6, no.1, pp.38-46, 2018 (Peer-Reviewed Journal)
ÜNİVERSİTE ÖĞRENCİLERİNİN PROSPEKTÜS KULLANMA BİLİNCİ VE DAVRANIŞLARININ ARAŞTIRILMASI Özkan N. F., Ulutaş B. Selçuk Üniversitesi Fen Fakültesi Fen Dergisi , vol.44, no.1, pp.51-62, 2018 (Peer-Reviewed Journal)
THE USE OF THE ANALYTIC HIERARCHY PROCESS FOR ADMISSION TO AN AIR TRAFFIC CONTROL DEPARTMENT ÖZDEMİR M., SAĞIR M. International Journal of the Analytic Hierarchy Process , 2018 (Scopus)
ERGONOMİK RİSK KISITLARI ALTINDA YENİ BİR MONTAJ HATTI DENGELEME MODELİGELİŞTİRİLMESİ KAHYA E., ŞAHİN B. N., DAŞDELEN E., DOĞRU S. Mühendislik Bilimleri ve Tasarım Dergisi , vol.6, pp.49-57, 2018 (Peer-Reviewed Journal)
MEASUREMENT OF CLINICAL NURSE PERFORMANCE: DEVELOPING A TOOL INCLUDING CONTEXTUAL ITEMS KAHYA E., ORAL N. Journal of Nursing Education and Practice , vol.8, no.6, pp.112-123, 2018 (Peer-Reviewed Journal)
APPLICABLE PERFORMANCE CRITERIA TO EVALUATE CLINICAL NURSES KAHYA E., ORAL N. Hacettepe Sağlık İdaresi Dergisi , vol.21, no.2, pp.289-304, 2018 (Peer-Reviewed Journal)
A decision support system for non-identical parallel machine scheduling SARIÇİÇEK İ. PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , vol.24, no.1, pp.108-116, 2018 (ESCI)
USE OF ANALYTIC HIERARCHY PROCESS FOR THE STUDENT SELECTION PROBLEM OF AN AIR TRAFFIC CONTROL DEPARTMENT ÖZDEMİR M., SAĞIR M. International Journal of the Analytic Hierarchy Process , vol.10, no.1, 2018 (Scopus)
KOMBİ MONTAJ HATTINDA ERGONOMİK RİSK ANALİZİ KAHYA E., GÜRLEYEN E. Mühendislik Bilimleri ve Tasarımı Dergisi , vol.6, no.0, pp.58-66, 2018 (Peer-Reviewed Journal)
Düzey 1 Bölgelerinin İşsizliği Azaltmada Rekabet Gücüne Göre Sıralanması PARLAKTUNA İ., SARIÇİÇEK İ. Business and Economics Research Journal , vol.9, no.4, pp.811-823, 2018 (Peer-Reviewed Journal)
Bir Yüksek Öğretim Kurumunda Öğrenci Sıralarının Uygunluğunun Analizi, KAHYA E., ÜNLÜER G., GÜZELDAL Z., DEMİRCİ Z. Ö. Ergonomi , vol.1, no.2, pp.59-76, 2018 (Peer-Reviewed Journal)
Sağlık Hizmet Kalitesinin Servqual Temelli Kalite Evi ile Değerlendirilmesinde Yeni Bir Yaklaşım AKTAR DEMİRTAŞ E., KÖKSAL G. Verimlilik Dergisi , vol.2, no.2, pp.29-52, 2018 (Peer-Reviewed Journal)
Kaynak Makinelerinin Vardiya Bazında Çizelgelenmesi Problemi İçin İki Aşamalı Bir Çözüm Yaklaşımı SARAÇ T., Erten K., Yılmaz E. Endüstri Mühendisliği , vol.29, no.1, pp.2-14, 2018 (Peer-Reviewed Journal)
Nöroloji Yoğun Bakım Ünitesinde Çalışan Hemşirelerin Maruz Kaldığı Fiziksel Zorlanmaların Analizi KAHYA E., GÜRLEYEN E., GÜLBANDILAR S. Ergonomi , vol.1, no.1, pp.39-48, 2018 (Peer-Reviewed Journal)
PERSONEL DEĞERLEME SİSTEMİ İÇİN KARAR DESTEK SİSTEMİ TASARIMI KAHYA E., TÜRKOĞLU M. Süleyman Demirel Üniversitesi İktisadi ve İdari Bilimler Fakültesi Dergisi , vol.23, no.3, pp.937-960, 2018 (Peer-Reviewed Journal)
Kabin Üretimi Yapan Bir İşletmenin Kaynak Atölyesinde İş Sağlığı Ve Güvenliği Risk Değerlendirmesi AYDIN F., ÇİDEM Ç., KAHYA E. Ergonomi , vol.1, no.3, pp.137-147, 2018 (Peer-Reviewed Journal)
Harran University Journal of Engineering ÖĞÜTLÜ A. S., HASGÜL S. Harran University Journal of Engineering , vol.3, no.2, pp.35-42, 2018 (Peer-Reviewed Journal)
BİR METAL SANAYİ İŞLETMESİNDE ERGONOMİK RİSK ANALİZİ. ÖZOĞUL B., ÇİMEN B., KAHYA E. Mühendislik Bilimleri ve Tasarımı Dergisi , vol.6, pp.159-175, 2018 (Peer-Reviewed Journal)
BİR MOBİLYA İŞLETMESİNİN MONTAJ HATTINDA ERGONOMİK RİSK ANALİZİ ÇİÇEK E., KAZANÇ N., KAHYA E. Mühendislik Bilimleri ve Tasarımı Dergisi , vol.6, pp.67-82, 2018 (Peer-Reviewed Journal)
AN ASSIGNMENT BASED MODELLING APPROACH FOR THE INVENTORY ROUTING PROBLEM OF MATERIAL SUPPLY SYSTEMS OF THE ASSEMBLY LINES Satoğlu Ş. I., SİPAHİOĞLU A. SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI , vol.36, no.1, pp.161-177, 2018 (ESCI)
A wage model consisted of job evaluation employee characteristics and job performance KAHYA E. PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , vol.24, no.4, pp.720-729, 2018 (ESCI)
EFFICIENCY ANALYSIS OF AIRPORTS IN TURKEY CONSIDERING ENVIRONMENTAL EFFECTS Ulutaş B. The Central European Review of Economics and Management , vol.2, no.1, pp.65-78, 2018 (Peer-Reviewed Journal)
A differential evolution algorithm for simple straight and U-type assembly line balancing problems ÖZÇELİK F. PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , vol.24, no.1, pp.130-140, 2018 (ESCI)
A NEW SCHEDULING APPROACH TO TRAINPLATFORMING PROBLEM AKYOL ÖZER E., Volek J., SARAÇ T., Bulicek J. Perner’xxs Contacts , vol.2, no.12, pp.5-18, 2017 (Peer-Reviewed Journal)
Assessing visual control activities in ceramic tile surface defect detection: an eye-tracking study Ulutaş B., Özkan N. F. INTERNATIONAL JOURNAL OF INTELLIGENT ENGINEERING INFORMATICS , vol.5, pp.342-351, 2017 (ESCI)
Seven SAĞIR M. International Journal of the Analytic Hierarchy Process , vol.9, no.3, 2017 (Scopus)
Farklı yeteneklere ve önceliklere sahip ajanların ve aynı ajana atanması gereken işlerin olduğu çok kaynaklı genelleştirilmiş atama problemi için bir hedef programlama modeli ÖZÇELİK F., SARAÇ T. Gazi Üniversitesi Fen Bilimleri Dergisi Part: C Tasarım ve Teknoloji , vol.5, no.1, pp.75-90, 2017 (Peer-Reviewed Journal)
İşgücü Piyasası İçin Bir Sosyal Sermaye Puanı Hesaplama Önerisi Parlaktuna İ., Saraç T., Meçik O., Aybek E. C. American Academic Scholarly Reserach Journal , vol.7, no.7, 2017 (Peer-Reviewed Journal)
Using eye-tracking data to evaluate medicine information leaflets on-screen Özkan N. F., Ulutaş B. Journal of Mathematics and Statistical Science , vol.3, no.12, pp.364-376, 2017 (Peer-Reviewed Journal)
Sağlık Hizmetlerinde Hastaların Kalite Algılarının Değerlendirilmesi DENİZ N., BÜYÜK K. Balkan and Near Eastern Journal of Social Sciences , 2017 (Peer-Reviewed Journal)
An Investigation on the Ratings from Four Sources for Different Positions in a 360 Degree Feedback System KAHYA E., ÇEMREK F. ESKISEHIR OSMANGAZI UNIVERSITESI IIBF DERGISI-ESKISEHIR OSMANGAZI UNIVERSITY JOURNAL OF ECONOMICS AND ADMINISTRATIVE SCIENCES , vol.12, no.3, pp.49-64, 2017 (ESCI)
MULTI OBJECTIVE OPTIMIZATION OF TURNING OPERATION USING HYBRID DECISION MAKING ANALYSIS Sofuoğlu M. A., Arapoğlu R. A., Orak S. Anadolu University Journal of Science and Technology A - Applied Sciences and Engineering , vol.18, no.3, pp.595-610, 2017 (Peer-Reviewed Journal)
Paralel Makina Çizelgeleme Problemi için bir Karma TamsayılıProgramlama Modeli: Ortak Kaynak Kullanımı AKYOL ÖZER E., SARAÇ T. Gazi Üniversitesi Fen Bilimleri Dergisi Part: C Tasarım ve Teknoloji , vol.5, no.3, pp.109-126, 2017 (Peer-Reviewed Journal)
Türkiye deki illerin iş kazaları ve meslek hastalıkları açısından veri zarflama analizi ile değerlendirilmesi Ulutaş B. e-Cumhuriyet Üniversitesi İktisadi ve İdari Bilimler Dergisi (elektronik) , vol.17, no.2, pp.23-46, 2016 (Peer-Reviewed Journal)
Selection of disposal contractor by multi criteria decision making methods Korkmazer C., AKTAR DEMİRTAŞ E., Erol D. PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , vol.22, no.4, pp.305-313, 2016 (ESCI)
KULLANICI TERCİHLERİNİN DİKKATE ALINMASI DURUMUNDAÜNİVERSİTE DERS ÇİZELGELEME PROBLEMİ KAMIŞLI ÖZTÜRK Z., KASIMBEYLİ N., SAĞIR M., SOYUÖZ ACAR M., ÖZÇETİN E., ALEGÖZ M., et al. Endüstri Mühendisliği Dergisi , vol.27, no.1, pp.2-16, 2016 (Peer-Reviewed Journal)
An Experiment in Use of Brain Computer Interfaces for Cognitive Researches ÖZKAN N. F., KAHYA E. International Journal of Intelligence Science , vol.5, pp.80-88, 2015 (Peer-Reviewed Journal)
A Multi Crıterıa Job Evaluatıon Method For A State Bank AKTAR DEMİRTAŞ E., BURUK ŞAHİN Y., SAĞIR M. International Journal of AHP , vol.7, no.2, 2015 (Scopus)
Choosing the best city of the future SAĞIR M. Journal of Urban Management , vol.4, no.1, pp.3-23, 2015 (Scopus)
Rankıng Countrıes More Relıably In The Summer Olympıcs Thomas L S., SAĞIR M. International Journal of the Analytic Hierarchy Process , vol.7, no.3, 2015 (Scopus)
USE OF REGRESSION IN NOISY SPEECH RECOGNITION ERGİN S., ARAPOĞLU R. A. Dumlupınar Üniversitesi Sosyal Bilimler Dergisi , pp.495-501, 2014 (Peer-Reviewed Journal)
How Many Judges Should There Be in a Group ? Saaty T. L., Özdemir M. Annals of Data Science , vol.1, pp.359-368, 2014 (Scopus)
Plastik enjeksiyon makinelerinin vardiya bazında çizelgelenmesi problemi için bir hedef programlama modeli Kaya S., SARAÇ T. Endüstri Mühendisliği Dergisi , vol.24, no.1, pp.12-26, 2013 (Peer-Reviewed Journal)
Decision Support System for Inventory Management in a Pharmaceutical Warehouse ARSLAN M., SARIÇİÇEK İ. ANADOLU UNIVERSITY JOURNAL OF SCIENCE AND TECHNOLOGY –A Applied Sciences and Engineering , vol.14, no.3, pp.283-295, 2013 (Peer-Reviewed Journal)
Ders proje gruplarının oluşturulması için bir matematiksel model SARAÇ T., ÖZÇELİK F. Endüstri Mühendisliği , vol.24, pp.2-11, 2013 (Peer-Reviewed Journal)
An integrated approach to supplier selection using AHP and FUZZY PROMETHEE BEKTUR G., HASGÜL S. Turkish Online Journal of Science & Technology , vol.3, no.3, pp.1-7, 2013 (Peer-Reviewed Journal)
Streptecoccus equi ile hyaluronik aist üretiminde optimum koşulların Plackett Burman yöntemi ile belirlenmesi AYTAR ÇELİK P., BURUK ŞAHİN Y., ÇABUK A. Elektronik Mikrobiyoloji Dergisi TR , vol.11, pp.28-35, 2013 (Peer-Reviewed Journal)
Normal and Abnormal Non Speech Audio Event Detection Using MFCC and PR Based Feature Sets Barkana B. D., Uzkent B., SARIÇİÇEK İ. Advanced Materials Research , vol.601, pp.200-208, 2013 (Peer-Reviewed Journal)
Kıdem Seviyelerine Göre İşgücü Çizelgeleme Problemi Hizmet Sektöründe Bir Uygulama BEKTUR G., HASGÜL S. İktisadi ve İdari Bilimler Fakültesi Dergisi , vol.15, no.2, pp.385-402, 2013 (Peer-Reviewed Journal)
Plastik parçalar üreten bir fabrikanın montaj hatlarının çizelgelenmesi AKYOL E., SARAÇ T. Endüstri Mühendisliği Dergisi , vol.23, no.2, pp.28-41, 2012 (Peer-Reviewed Journal)
Determining the parameters of MSG algorithm for multi period layout problem Ulutaş B., Saraç T. JOURNAL OF MANUFACTURING TECHNOLOGY MANAGEMENT , vol.23, no.7, pp.922-936, 2012 (ESCI)
Eti Şirketler Grubu nda üretim çizelgeleme problemi için bir hedef programlama modeli ve genetik algoritma Koçanlı M. M., Aydınbeyli Y. E., SARAÇ T. Endüstri Mühendisliği Dergisi , vol.23, no.3, pp.4-21, 2012 (Peer-Reviewed Journal)
A New Crossover Operator for Single Machine Total Weighted Tardiness Problem with Sequence Dependent Setup Times Kirlik G., Kartal Z., HASGÜL S. GAZI UNIVERSITY JOURNAL OF SCIENCE , vol.25, no.1, pp.127-136, 2012 (ESCI)
Evaluating the effect of teaching strategies and learning styles to students success Özkan N. F., Ulutaş B. e-Journal of New World Sciences Academy NWSA-Education Sciences , vol.7, no.12, pp.613-620, 2012 (Peer-Reviewed Journal)
0 1 tamsayılı doğrusal olmayan matematiksel modellerin uygun çözüm temelli genişletilmiş subgradient algoritması ile çözülmesi SARAÇ T. Eskişehir Osmangazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , vol.25, no.1, pp.57-73, 2012 (Peer-Reviewed Journal)
Application of the Electre III Method for a Solid Waste Management System SİPAHİOĞLU A., ÖZKAN A., BANAR M., ACAR I. Anadolu Üniversity Journal of Science and Technology , vol.12, no.1, pp.11-23, 2011 (Peer-Reviewed Journal)
Sıra bağımlı hazırlık süreli iki ölçütlü tek makine çizelgeleme problemi için sezgisel bir çözüm yöntemi ÖZÇELİK F., SARAÇ T. Endüstri Mühendisliği Dergisi , vol.22, no.4, pp.48-57, 2011 (Peer-Reviewed Journal)
A discrete particle swarm optimization algorithm for bicriteria warehouse location problem ÖZSOYDAN F. B., SARAÇ T. Ekonometri ve İstatistik Dergisi , no.13, pp.114-124, 2011 (Peer-Reviewed Journal)
Single Allocation P Hub Median Problem to Monitor Land Borders by Using Unmanned Aircraft Yasemin A., SARIÇİÇEK İ. Technological developments in Networking, Education and Automation , pp.237-241, 2010 (Peer-Reviewed Journal)
Çok amaçlı sırt çantası probleminin çözümüne yeni bir yaklaşım konik skalerleştirme SİPAHİOĞLU A., SARAÇ T. Endüstri Mühendisliği Dergisi , vol.21, no.4, pp.2-12, 2010 (Peer-Reviewed Journal)
Plastik enjeksiyon makinalarının çizelgelenmesi problemi SARAÇ T., SİPAHİOĞLU A. Endüstri Mühendisliği Dergisi , vol.20, no.2, pp.2-14, 2009 (Peer-Reviewed Journal)
Mutfak Armatürü Tasarımının Kullanıcıların Görsel Algılarına Göre Lojistik Regresyon Yoluyla Belirlenmesi Aktar Demirtaş E., Anagün A., Köksal G. Endüstri Mühendisliği , vol.19, no.2, pp.17-31, 2008 (Peer-Reviewed Journal)
Evaluating the performance of children protection societies via data envelopment analysis Ulutaş B., Kırış Ş. Hacettepe University Journal of Society and Social Work , vol.19, no.1, pp.57-70, 2008 (Peer-Reviewed Journal)
Forecasting Method Selection for Capacity Planning in Service Systems Aktar Demirtaş E., Anagün S. Eskişehir Osmangazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , no.1, pp.137-150, 2007 (Peer-Reviewed Journal)
Hazırlık Zamanı Kaynaklı Üretim Kayıplarını Enazlayan Çok Amaçlı Bir Çizelgeleme Algoritması SAĞIR M., SARAÇ T. Endüstri Mühendisliği Dergisi , vol.18, no.4, pp.14-25, 2007 (Peer-Reviewed Journal)
A decision support system for underground mining method selection ALPAY Ş., YAVUZ M. Lecture Notes In Computer Science , vol.4570, pp.334, 2007 (Scopus)
A Genetic Algorithm for the Quadratic Multiple Knapsack Problem SİPAHİOĞLU A., SARAÇ T. Lecture Notes In Computer Science , vol.4729, pp.490-498, 2007 (Scopus)
Cooperative Decision Making with Scheduler Agents SARIÇİÇEK İ., Yüzügüllü N. Lecture Notes In Computer Science , vol.4674, pp.201-208, 2007 (Scopus)
Revising the Metal Industry Job Evaluation System for Blue Collar Jobs KAHYA E. Compensation & Benefits Review , vol.38, no.6, pp.49-63, 2006 (Peer-Reviewed Journal)
Alternatif rotaların varlığında üretim hücrelerinin genetik algoritma kullanılarak oluşturulması SARAÇ T., ÖZÇELİK F. Endüstri Mühendisliği Dergisi , vol.17, no.4, pp.22-36, 2006 (Peer-Reviewed Journal)
Kıbrıs Sorunu Çözüm Önerilerini Değerlendirmede Analitik Serim Süreci Yaklaşımı Üstün Ö., Sağır M., Aktar Demirtaş E. Endüstri Mühendisliği , vol.16, no.4, pp.2-13, 2005 (Peer-Reviewed Journal)
Hücre Oluşturma Yöntemlerine İlişkin Bir Değerlendirme Aktar Demirtaş E. Eskişehir Osmangazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , no.2, pp.1-16, 2004 (Peer-Reviewed Journal)
Multi-Agent Shop-Floor Management System Sarıçiçek İ., Yüzügüllü N. Endüstri Mühendisliği , vol.14, no.4, pp.14-25, 2003 (Peer-Reviewed Journal)
Bir İşletmede Tedarikçi Seçimine Yönelik bir Model ve Uygulaması SARIÇİÇEK İ., DAĞDEVİREN M., Yüzügüllü N. Osmangazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , vol.14, no.1, pp.31-46, 2001 (Peer-Reviewed Journal)
A New Unidimensional Serach Method for Optimization The Tangential Interpolation KAHYA E. International Jorunal of Applied Mathematics , vol.1, no.7, pp.711-724, 1999 (Peer-Reviewed Journal)
Integrated facility design using an evolutionary approach with a subordinate network algorithm Norman B. A., Smith A. E., ARAPOĞLU R. A. PARALLEL PROBLEM SOLVING FROM NATURE - PPSN V , vol.1498, pp.937-946, 1998 (Peer-Reviewed Journal)
Decision Support System for the Determination of Quota Dedeakayogullari İ., Binbaşıoğlu E., Özkul A. E. Endüstri Mühendisliği , vol.8, no.4, pp.3-8, 1997 (Peer-Reviewed Journal)
Books & Book Chapters
Application of Digital Human Modelling and Factorial Experiments for Workstation Optimization Yetkin B. N., Ulutaş B. in: Human Factors and Simulation, Julia Wright,Daniel Barber, Editor, AHFE Open Access, New York, pp.8-15, 2024
Two-dimensional cutting problems: Effectiveness and efficiency of selected solution approaches; Case Study Printed Circuit Boards (Part I) Ulutaş B., Georgios I., Bracke S. in: Advances in Manufacturing IV Volume 1-Mechanical Engineering: Digitalization, Sustainability and Industry , Bartosz Gapinski,Olaf Ciszak,Vitalii Ivanov,Jose Mendes Machado, Editor, Springer Nature Switzerland Ag, Geneve, pp.107-121, 2024
A Human-Robot Collaboration Workstation Design to Assess Worker Physical Workload with JACK Software Ulutaş B., Yetkin B. N. in: Advances in Manufacturing IV: Volume 5 - Biomedical Engineering: Digitalization, Sustainability and Industry Applications, Gorski,F.,Păcurar,R.,Roca González,J.F.,Rychlik,M., Editor, Springer Nature Switzerland Ag, Geneve, pp.43-56, 2024
A Literature Review on Human-robot Collaborative Environments Considering Ergonomics YETKİN B. N., ULUTAŞ B. in: Lecture Notes in Management and Industrial Engineering, Calisir F., Editor, Springer, Cham, pp.49-60, 2023
TEKSTİL ATIK SUYU RENK GİDERİMİNİN TAM FAKTÖRİYEL TASARIM İLE OPTİMİZASYONU Aktar Demirtaş E., Aşçı Y. in: Mühendislik Bilimleri ve Teknoloji Araştırmaları, Yeliz Aşçı,Alper Polat, Editor, Livre De Lyon, Lyon, pp.45-59, 2023
Assessing Cognitive Load and Visual Attention in a Railway Simulator using Eye Tracking Technology: A Pilot Study ÖZKAN N. F., ALTIN İ., ULUTAŞ B. in: Advances in Engineering Research, Petrova V.M., Editor, NOVA Science Publishers, Inc., New York, pp.91-114, 2023
PBL Applications in Teaching Topics related with “Data” ULUTAŞ B., Timur C., Chelai O., Sa V., YILDIRIM H., Caprioara D. in: Higher Education in a Digital Era through Project-based E-learning: Contributes of the RESTART4EDU Project, Dias C., P., Azevedo A.S., Oliveira I., Kara E., Ergunay O., Donmez H. M., Girtu M., Caprioara D., Editor, Aletheia, Associação Científica e Cultural, Braga, pp.187-198, 2023
Efficiency Assessment of Onshore Wind Farms in Turkey: A DEA Approach ULUTAŞ B., ÖZKAN N. F. in: Advances in Engineering Research, Victoria M. Petrova, Editor, NOVA SCIENCE PUBLISHERS, pp.91-114, 2022
Efficiency Evaluation of Health Services of Selected Countries during the COVID-19 Pandemic ÖZKAN N. F., ULUTAŞ B. in: Advances in Health and Disease Volume 54, Lowell T. Duncan, Editor, Nova Science Publisher, New York, pp.119-136, 2022
FILLETING MACHINE SELECTION BY BEST WORST AND EDAS METHODS BURUK ŞAHİN Y., KURT M. S. in: Interdisciplinary Engineering Sciences Concepts, Researches and Applications, Prof. Dr. Serkan Islak, Editor, Livre de lyon, Lyon, pp.243-253, 2022
Bir Teknoloji Firmasında Giriş Kalite Kontrol için Karar Destek Sistemi Önerisi AKTAR DEMİRTAŞ E. in: Mühendislik Bilimlerinde Güncel Araştırma Örnekleri, Prof. Dr. Şemsi Yazıcı, Editor, Livre De Lyon, Lyon, pp.25-37, 2022
Efficiency of Assessment of Onshore Wind Farms in Turkey: A DEA Approach ULUTAŞ B., ÖZKAN N. F. in: Advances in Engineering Research Volume 48, Viktoria M. Petrova, Editor, Nova Science Publisher, New York, pp.91-114, 2022
Efficiency Evaluation of Health Services of Selected Countries during the COVID-19 Pandemic ÖZKAN N. F., ULUTAŞ B. in: Advances in Health and Disease, LOWELL T. DUNCAN, Editor, NOVA SCIENCE PUBLISHERS, pp.119-136, 2022
Bölüm 5 - Stok Yönetimi HASGÜL S. in: ÜRETİM YÖNETİMİ, Celal Hakan Kağnıcıoğlu, Editor, Anadolu Üniversitesi, Eskişehir, pp.140-175, 2021
İç Lojistik Uygulamaları SİPAHİOĞLU A., ALTIN İ. in: Yapay Zeka ve Büyük Veri, Sağıroğlu Şeref, Demirezen Umut M., Yazıcı Ahmet, Editor, Nobel, pp.117-152, 2021
A NOVEL TOPSIS INTEGRATED DSS FOR PERFORMANCE ASSESSMENT OF CITY HOSPITALS BURUK ŞAHİN Y., DEMİREL H. in: Engineering Sciences New Trends, Concepts and Research, Assoc. Prof. Dr. Halil İbrahim Kurt, Editor, Livre de Lyon, Lyon, pp.53-65, 2021
Statistical Process Control for Cutting and Tightening Processes of Aluminum Pipes Aktar Demirtaş E. in: ENGINEERING SCIENCES Innovative Approaches, Yeliz Aşçı, Editor, Livre de Lyon, Lyon, pp.102-112, 2021
Testing Performance of Assembly Workers by Use of Dexterity Tests and Eye-Tracking System Ulutaş B., Özkan N. F. in: Advances in Engineering Research, Victoria M. Petrova, Editor, NOVA Science Publishers Inc. , New York, pp.167-184, 2021
Üretim Planlaması Uygulamaları Sarıçiçek İ., Dündar D. R. in: Yapay Zeka ve Büyük Veri Kitap Serisi 2: Endüstri 4.0 ve Yapay Zeka, Sağıroğlu Şeref,Demirezen Mustafa Umut,Yazıcı Ahmet, Editor, Nobel Yayın Dağıtım, Ankara, pp.83-116, 2021
Testing Performance of Assembly Workers by Use of Dexterity Tests and Eye-Tracking System ULUTAŞ B., ÖZKAN N. F. in: Advances in Engineering Research, Victoria M. Petrova, Editor, NOVA Science Publishers Inc. , New York, pp.167-184, 2021
Preemptive goal programming approach for assembly line worker assignment and rebalancing problem KARAŞ A., ÖZÇELİK F. in: Research & Reviews in Engineering-I, NERGIS Banu, BARDAK Selahattin, KAYAR Mahmut, MENDİ Arif Furkan, Editor, Gece Kitaplığı, Ankara, pp.65-86, 2021
Dağıtım Operasyonlarında Kamyon-Dron Ekip Lojistiği Çalışmaları ÖZDEN G., SARIÇİÇEK İ. in: AKILLI DÖNÜŞÜME YOLCULUK, Prof. Dr. Semra BİRGÜN, Prof. Dr. Kemal Güven GÜLEN, Doç. Dr. Atik KULAKLI, Dr. Yıldız ŞAHİN, Editor, ARTİKEL AKADEMİ, İstanbul, pp.155-174, 2021
Sürecin Yeniden Tasarlanması Alpay Ş. in: Business Process Management, Doç.Dr. Sinan AYDIN, Editor, Anadolu Üniversitesi Yayınları, Eskişehir, pp.157-172, 2021
Simulated Annealing Algorithm for In-Plant Milk-Run System ALTIN İ., SİPAHİOĞLU A. in: Production Research, Daniel Alejandro Rossit, Fernando Tohmé, Gonzalo Mejía Delgadillo, Editor, Springer, pp.187-201, 2021
Bölüm 4 - Nitel Süreç Analizi HASGÜL S. in: İŞ SÜREÇLERİ YÖNETİMİ, Sinan Aydın, Editor, Anadolu Üniversitesi, Eskişehir, pp.66-95, 2021
Bölüm 5 - Nicel Süreç Analizi HASGÜL S. in: İŞ SÜREÇLERİ YÖNETİMİ, Sinan Aydın, Editor, Anadolu Üniversitesi, Eskişehir, pp.94-129, 2021
Bölüm 6 - Üretim Kaynakları Planlaması HASGÜL S. in: ÜRETİM YÖNETİMİ, Celal Hakan Kağnıcıoğlu, Editor, Anadolu Üniversitesi, Eskişehir, pp.177-212, 2021
Eye Tracking Applications in Real Life Manufacturing Environments: Materials Handling and Quality Control Özkan N. F., Ulutaş B. in: Advances in Engineering Research, Victoria M. Petrova, Editor, NOVA Science Publishers Inc. , New York, pp.93-118, 2021
Eye Tracking Applications in Real Life Manufacturing Environments: Materials Handling and Quality Control ÖZKAN N. F., ULUTAŞ B. in: Advances in Engineering Research, Victoria M. Petrova, Editor, NOVA Science Publishers Inc. , New York, pp.93-118, 2021
Hata Tespiti ve Kestirimci Bakım Uygulamalarında Yapay Zeka Kullanımı ÇİNAR E., SARIÇİÇEK İ. in: Yapay Zeka ve Büyük Veri Kitap Serisi 2: Endüstri 4.0 ve Yapay Zeka, Sağıroğlu Şeref, Demirezen Mustafa Umut, Yazıcı Ahmet, Editor, Nobel, Ankara, pp.243-266, 2021
Süreç Tanımlama ve Temel Süreç Modelleme Alpay Ş. in: Business Process Management, Doç.Dr. Sinan AYDIN, Editor, Anadolu Üniversitesi Yayınları, Eskişehir, pp.19-32, 2021
Forming Zones in a Tandem Design AGV System Based onCell Formation Principles ULUTAŞ B. in: Advances in Mechanical Engineering in the Era of New Technologies, Jayanta Kumar Nath, Sasmeeta Tripathy, Bibhuti Bhusan Pradhan, Rajendra Prasad Mohanty, Editor, Siksha ‘O’ Anusandhan, Bhubaneswar, Odisha, pp.176-184, 2020
A HOUSE OF QUALITY APPLICATION BASED ON A DECISION SUPPORT SYSTEM FOR THE CREDIT CARD MONITORING UNIT OF A BANK Buruk Şahin Y., Aktar Demirtaş E. in: Theory and Research in Engineering II, Mihriban Kalkancı, Editor, Gece Yayıncılık, Ankara, pp.263-280, 2020
İşletme Bilgi Sistemleri SARIÇİÇEK İ., SİPAHİOĞLU A., MUTLU M. E., KAYABAŞ İ., KİP KAYABAŞ B., GÜREL U., et al. Anadolu Üniversitesi, Eskişehir, 2020
Bölüm 7 - Karar Vermeyi Güçlendirme HASGÜL S. in: BİLİŞİM SİSTEMLERİ, Özlem Oktal, Editor, Anadolu Üniversitesi, Eskişehir, pp.171-201, 2020
The Environmental Performance Evaluation of OECD Countries Through Data Envelopment Analysis Temiz I., Buruk Şahin Y., Aktar Demirtaş E. in: Theory and Research in Engineering, Adnan Hayaloğlu, Editor, Gece Kitaplığı, İstanbul, pp.119-144, 2020
Procurement Supplier Selection SARAÇ T. in: Supply Chain Management, Onur Kaya, Editor, Anadolu Üniversitesi Yayınları, pp.137-151, 2020
Bölüm 6 - Bilgiyi Yönetme HASGÜL S. in: BİLİŞİM SİSTEMLERİ, Özlem Oktal, Editor, Anadolu Üniversitesi, Eskişehir, pp.137-170, 2020
Chapter 5 - Inventory Management HASGÜL S. in: OPERATIONS MANAGEMENT, Celal Hakan Kağnıcıoğlu, Editor, Anadolu Üniversitesi, Eskişehir, pp.124-150, 2019
Chapter 6 - Production and Resource Planning HASGÜL S. in: OPERATIONS MANAGEMENT, Celal Hakan Kağnıcıoğlu, Editor, Anadolu Üniversitesi, Eskişehir, pp.151-177, 2019
Toplam Kalite Yönetiminde İstatistiksel Süreç Kontrolü BURNAK N., AKTAR DEMİRTAŞ E. Eskişehir Osmangazi Üniversitesi, 2019
İŞ GÜVENLİĞİ KAHYA E., ÖZKAR D. DORLİON Yayın Evi, Eskişehir, 2018
Artificial Neural Network Modelling for Mode Choice Prediction in Transportation Planning KARA Ç., ÖZDEN G., KARACASU M., SARIÇİÇEK İ. in: Current Debates in Sustainable Architecture, Urban Design Environmental Studies, Aslı Doğan, Günay Gönüllü, Editor, IJOPEC Publication Limited, United Kingdom, pp.101-110, 2018
Mühendislik Ekonomisi KAHYA E. ESOGU yayın No : 248, Eskişehir, 2017
Doğrusal Olmayan Programlama SAĞIR M. in: Yöneylem Araştırması II, Ahmet Özmen, Editor, Anadolu Üniversitesi, Eskişehir, pp.2-22, 2017
İş Etüdü KAHYA E. ESOGÜ Yayın No : 253, Eskişehir, 2017
Tamsayılı Programlama SAĞIR M. in: .Yöneylem Araştırması II, Ahmet Özmen, Editor, Anadolu Üniversitesi, Eskişehir, pp.22-42, 2017
Analitik Hiyerarşi Süreci SAĞIR M. in: Yöneylem Arştırması II, Ahmet Özmen, Editor, Anadolu Üniversitesi, Eskişehir, pp.156-172, 2017
Beyond ERP: From Data to Intelligence KAPANOĞLU M. in: Business Information Systems, Prof.Dr. Hasan Durucasu, Editor, Anadolu Üniversitesi, Eskişehir, pp.215-232, 2017
Verimlilik Ölçme ve Değerlendirme DENİZ N. in: Verimlilik Yönetimi, Büyük, Köksal, Editor, Anadolu Üniversitesi, Eskişehir, pp.52-93, 2016
Simpleks Algoritması SAĞIR M. in: Yöneylem Araştırması I, Fethi Şeniş, Editor, Anadolu Üniversitesi, Eskişehir, pp.68-91, 2016
A Novel to Approach to Quantify the Risk Probabilities for a Risk Analysis Methodology Özkan N. F., Ulutaş B. in: Advances in Social Occupational Ergonomics, Goossens,Richard H.M., Editor, Springer, London/Berlin , New York, pp.341-347, 2016
ZEKİ KARAR DESTEK SİSTEMLERİ KAPANOĞLU M. in: KARAR DESTEK SİSTEMLERİ, PROF. DR. MUZAFFER KAPANOĞLU, Editor, ANADOLU ÜNİVERSİTESİ AÇIKÖĞRETİM FAKÜLTESİ, Eskişehir, pp.192-219, 2016
İşlemtabloları ile Veri Madenciliği KAPANOĞLU M., GÜLTEKİN Ö. in: İŞLETME ANALİTİĞİ, Muzaffer KAPANOĞLU, Fikret ER, Editor, Anadolu Üniversitesi Açıköğretim Fakültesi, Eskişehir, pp.190-214, 2016
İşlemtabloları ile Veri Düzenleme ve Denetleme KAPANOĞLU M., GÜLTEKİN Ö. in: İŞLETME ANALİTİĞİ, Muzaffer KAPANOĞLU, Fikret ER, Editor, Anadolu Üniversitesi Açıköğretim Fakültesi, Eskişehir, pp.52-81, 2016
İşlemtabloları ile Veri Yönetimi ve Analizi KAPANOĞLU M., GÜLTEKİN Ö. in: İŞLETME ANALİTİĞİ, Muzaffer KAPANOĞLU, Fikret ER, Editor, Anadolu Üniversitesi Açıköğretim Fakültesi, Eskişehir, pp.82-109, 2016
Uluslararası Taşımacılık Yönetimi SİPAHİOĞLU A., BÜYÜKÖZKAN FEYZİOĞLU G., KAMIŞLI ÖZTÜRK Z., ŞAHİN G., GÜRDAL E., ABA B. in: Uluslararası Lojistik, Bülent Çatay, Gürkan Öztürk, Editor, Anadolu Üniversitesi, Eskişehir, pp.22-43, 2016
İşlemtabloları ile Veri Düzenleme ve Denetleme KAPANOĞLU M., GÜLTEKİN Ö. in: İŞLETME ANALİTİĞİ, MUZAFFER KAPANOĞLU, FİKRET ER, Editor, ANADOLU ÜNİVERSİTESİ AÇIKÖĞRETİM FAKÜLTESİ, Eskişehir, pp.52-81, 2016
İşlemtabloları ile Veri Madenciliği KAPANOĞLU M., GÜLTEKİN Ö. in: İŞLETME ANALİTİĞİ, PROF. DR. MUZAFFER KAPANOĞLU, DOÇ. DR. FİKRET ER, Editor, ANADOLU ÜNİVERSİTESİ AÇIKÖĞRETİM FAKÜLTESİ, Eskişehir, pp.190-214, 2016
Ayrıt Tabanlı Araç Rotalama Problemleri SİPAHİOĞLU A., KESKİN M. H., TANYAŞ M., KAMIŞLI ÖZTÜRK Z. in: Lojistik Planlama ve Modelleme, Gülsen Serap Çekerol, Editor, Anadolu Üniversitesi, Eskişehir, pp.150-164, 2016
KARAR DESTEK SİSTEMLERİNİN GELİŞTİRİLMESİNE İŞLEMTABLOSU PROGRAMLAMA KAPANOĞLU M. in: KARAR DESTEK SİSTEMLERİ, MUZAFFER KAPANOĞLU, Editor, ANADOLU ÜNİVERSİTESİ AÇIKÖĞRETİM FAKÜLTESİ, Eskişehir, pp.50-81, 2016
İşbilim ve Verimlilik DENİZ N. in: Verimlilik Yönetimi, Büyük, Köksal, Editor, Anadolu Üniversitesi, Eskişehir, pp.94-133, 2016
İşlemtabloları ile Veri Yönetimi ve Analizi KAPANOĞLU M., GÜLTEKİN Ö. in: İŞLETME ANALİTİĞİ, PROF. DR. MUZAFFER KAPANOĞLU, DOÇ. DR. FİKRET ER, Editor, ANADOLU ÜNİVERSİTESİ AÇIKÖĞRETİM FAKÜLTESİ, Eskişehir, pp.82-109, 2016
Duyarlılık Analizi SAĞIR M. in: Yöneylem Araştırması I, Fethi Şeniş, Editor, Anadolu Üniversitesi, Eskişehir, pp.92-115, 2016
Verimlilik ve Yalın Düşünce DENİZ N. in: Verimlilik Yönetimi, Büyük, Köksal, Editor, Anadolu Üniversitesi, Eskişehir, pp.218-247, 2016
Sosyal Davranış Kuralları ve Protokol Deniz N. in: Profesyonel Yaşamda İmaj ve İtibar Yönetimi, Köksal Büyük, Editor, Anadolu Üniversitesi, Eskişehir, pp.126-169, 2016
Lojistik Yönetiminde Karşılaşılan Eniyileme Problemleri ve Modellemenin Önemi SİPAHİOĞLU A., KESKİN M. H., TANYAŞ M., KAMIŞLI ÖZTÜRK Z. in: Lojistik Planlama ve Modelleme, Gülsen Serap Çekerol, Editor, Anadolu Üniversitesi, Eskişehir, pp.2-29, 2016
İŞLETME ANALİTİĞİ: TEMEL KAVRAMLAR KAPANOĞLU M. in: İŞLETME ANALİTİĞİ, PROF. DR. MUZAFFER KAPANOĞLU, DOÇ. DR. FİKRET ER, Editor, ANADOLU ÜNİVERSİTESİ AÇIKÖĞRETİM FAKÜLTESİ, Eskişehir, pp.2-24, 2016
Yöneylem Araştırmasına Giriş SAĞIR M. in: Yöneylem Araştırması I, Fethi Şeniş, Editor, Anadolu Üniversitesi, Eskişehir, pp.2-13, 2016
Contribution for analysing, saving and prioritising of lessons learned issues regarding product improvement and future product generations Bracke S., Inoue M., ULUTAŞ B. in: Procedia CIRP, Seliger G, Kohl H, Mallon J, Editor, Elsevier, Amsterdam, pp.179-184, 2016
KARAR DESTEK SİSTEMLERİ: TEMEL KAVRAMLAR KAPANOĞLU M. in: KARAR DESTEK SİSTEMLERİ, PROF. DR. MUZAFFER KAPANOĞLU, Editor, ANADOLU ÜNİVERSİTESİ AÇIKÖĞRETİM FAKÜLTESİ, Eskişehir, pp.2-23, 2016
OPTİMİZASYON YÖNELİMLİ KARAR DESTEK SİSTEMLERİ KAPANOĞLU M. in: KARAR DESTEK SİSTEMLERİ, PROF.DR. MUZAFFER KAPANOĞLU, Editor, ANADOLU ÜNİVERSİTESİ AÇIKÖĞRETİM FAKÜLTESİ, Eskişehir, pp.110-135, 2016
Data Query Alpay Ş., Aydın S. in: Database Systems, Doç.Dr. Harun SÖNMEZ,Yrd.Doç.Dr. Snan AYDIN, Editor, Anadolu Üniversitesi Yayınları, Eskişehir, pp.118-147, 2016
Uluslararası Satın Alma ve Tedarik Stratejileri SİPAHİOĞLU A., ŞAHİN G., KAMIŞLI ÖZTÜRK Z., ERTEK G., ABA B., BÜYÜKÖZKAN FEYZİOĞLU G. in: Uluslararası Lojistik, Bülent Çatay, Gürkan Öztürk, Editor, Anadolu Üniversitesi, Eskişehir, pp.44-61, 2016
Düğüm Tabanlı Araç Rotalama Problemleri SİPAHİOĞLU A., KESKİN M. H., TANYAŞ M., KAMIŞLI ÖZTÜRK Z. in: Lojistik Planlama ve Modelleme, Gülsen Serap Çekerol, Editor, Anadolu Üniversitesi, Eskişehir, pp.124-149, 2016
VERİ-YÖNELİMLİ KARAR DESTEK SİSTEMLERİ VE ANALİTİK SİSTEMLER KAPANOĞLU M. in: KARAR DESTEK SİSTEMLERİ, PROF.DR. MUZAFFER KAPANOĞLU, Editor, ANADOLU ÜNİVERSİTESİ AÇIKÖĞRETİM FAKÜLTESİ, Eskişehir, pp.136-167, 2016
Assessing medicine labels to improve usability ULUTAŞ B., ÖZKAN N. F. in: Advances in Human Aspects of Healthcare, Vincent Duffy, Nancy Lightner, Editor, AHFE Conference 2014, pp.559-567, 2014
Measurement of Cognitive Workload by Use of Combined Methods Including Brain-Computer Interfaces Özkan N. F., Kahya E. in: Advances in Social and Organizational Factors, Peter Vink, Editor, CRC, New York , New York, pp.458-468, 2014
Assesing Medicine Labels to Improve Usability Ulutaş B., Özkan N. F. in: Advances in Human Aspects of Healthcare, Vincent Duffy,Nancy Lightner, Editor, CRC, New York , New York, pp.559-567, 2014
Analitik Serim Süreci Yaklaşımı ile Afet Yönetimi modeli Önerisi Sağır M. in: Afetleri Yönetmek, İsmail Gündüz, Editor, Değisim Yayınları, İstanbul, pp.93-104, 2014
İş Güvenliği KAHYA E., ÖZKAR D. ESOGU Yayın No : 246, Eskişehir, 2014
Ergonomi-I Deniz N. in: İş Etüdü, Köksal Büyük, Editor, Anadolu Üniversitesi, Eskişehir, pp.142-179, 2013
Ergonomi-II Deniz N. in: İş Etüdü, Köksal Büyük, Editor, Anadolu Üniversitesi, Eskişehir, pp.180-216, 2013
Zaman Etüdü Deniz N. in: İş Etüdü, Köksal Büyük, Editor, Anadolu Üniversitesi, Eskişehir, pp.106-140, 2013
Ünite 5: Stok Yönetimi HASGÜL S. in: Üretim Yönetimi, KAĞNICIOĞLU CELAL HAKAN, Editor, Anadolu Üniversitesi Yayını No: 2343, Eskişehir, pp.110-133, 2012
Ünite 6: Üretim ve Kaynak Planlaması HASGÜL S. in: Üretim Yönetimi, KAĞNICIOĞLU CELAL HAKAN, Editor, Anadolu Üniversitesi Yayını No: 2343, Eskişehir, pp.134-157, 2012
Uluslararası Taşımacılık Yönetimi SİPAHİOĞLU A. in: Uluslararası Lojistik, Bülent Çatay, Gürkan Öztürk, Editor, Anadolu Üniversitesi, Eskişehir, pp.22-43, 2012
Uluslararası Satın Alma ve Tedarik Stratejileri SİPAHİOĞLU A. in: Uluslararası Lojistik, Bülent Çatay, Gürkan Öztürk, Editor, Anadolu Üniversitesi, Eskişehir, pp.44-61, 2012
Ünite 1: Proje ve Proje Yönetimi Nedir? HASGÜL S. in: Çoğrafi Bilgi Sistemlerinde Proje Tasarımı ve Yönetimi I, UYGUÇGİL HAKAN, Editor, Anadolu Üniversitesi Yayını No: 2343, Eskişehir, pp.1-21, 2011
A Multicriteria Decision Making in Complex Environment: Analytic Hierarchy Process and Analytic Network Process Sağır M. in: Enterprise Business Management A Handbook for Educator Consulters and Practitioners, Alptekin Erkollar, Editor, Tectum Verlag, Zürich, pp.51-82, 2010
Single Allocation P-Hub Median Problem to Monitor Land Borders by Using Unmanned Aircraft Akkuş Y., SARIÇİÇEK İ. in: Technological Developments in Networking, Education and Automation, Khaled Elleithy, Tarek Sobh, Magued Iskander, Vikram Kapila, Mohammad A. Karim, Ausif Mahmood, Editor, Springer, New York, pp.237-241, 2010
Recent developments in supplier selection and order allocation process Üstün Ö., Aktar Demirtaş E. in: Social, managerial, and organizational dimensions of enterprise information systems, Cruz-Cunha M.M, Editor, IGI GLOBAL, New York, pp.93-112, 2010
Multicriteria Decision Making in Compleks Environment: Analytic Hierarchy Process and Analytic Network Process Sağır M. ..., İstanbul, 2009
Üretim İşletmelerinde Simülasyon Yönteminin Verimliliğe Etkisi ve Uygulamalı Örnekler HASGÜL S. in: Fabrika Üretim Organizasyonlarının Yeniden Yapılandırılması ve Verimliliğin Arttırılması Yoluyla Büyüme, H.İ. Koruca, G. Özdemir, A. Göleç, S. Hasgül, Editor, Nobel Yayın Dağıtım, Ankara, pp.27-42, 2008
Using Thinking Processes and Five Focusing Steps of The Theory of Constarints in a Manufacturing Environment KARTAL Z., HASGÜL S. in: Perspectives on Business and Management Volume 2, Aktan, C.C, Balta, S., Editor, Yaşar University, Birleşik Matbaacilik, İzmir, pp.343-357, 2007
Prioridades Negativas Saaty T. L., Sağır M. in: Toma de Decisiones En Escenarios Complejos, Claudio Garuti, Editor, Impreso en LOM Ltda, Santiago, pp.1-24, 2005
The Encyclicon A Dictionary of Decisions with Dependence and Feedback Based on the Analytic Network Process Saaty T., Sağır M. RWS Publications, Pennsylvania, 2005
Toma de Decisiones En Escenarios Complejos, Impreso en LOM Ltda., Chile, (2005). (Capitulo 5: Prioridades Negativas, (T.L.Saaty, M. Sagir Ozdemir). Sağır M. Impreso en LOM Ltda, Valparaíso, 2005
Refereed Congress / Symposium Publications in Proceedings
Routing with Pickup and Delivery via Deep Reinforcement Learning Derin Pekiştirmeli Öğrenme ile Al-Bırak Rotalama Aslan Yildiz Ö., SARIÇİÇEK İ., ÖZKAN K., YAZICI A. 32nd IEEE Conference on Signal Processing and Communications Applications, SIU 2024, Mersin, Turkey, 15 - 18 May 2024
A Mathematical model for routing of Industrial Inspection Robots Kara M. E., Sipahioğlu A., Yazıcı A. 33rd European Conference on Operational Research (EURO 2024), Kobenhavn, Denmark, 30 June - 03 July 2024, pp.377
A Human-Robot Collaboration Workstation Design to Assess Worker Physical Workload with JACK Software ULUTAŞ B., YETKİN B. N. 8th International Scientific-Technical Conference Manufacturing, MANUFACTURING 2024, Poznan, Poland, 14 - 16 May 2024, pp.43-56
PERFORMANCE EVALUATION OF ANATOLIAN HIGH SCHOOLS IN ESKISEHIR USING DEA Arapoğlu R. A. 13th International Congress on Engineering, Architecture and Design, İstanbul, Turkey, 8 - 09 June 2024, pp.684-685
A Best Worst Method based Vehicle Routing Model for Medical Waste Management Buruk Şahin Y. The 3rd International Conference on Applied Mathematics in Engineering (ICAME’24) , Balıkesir, Turkey, 26 - 28 June 2024, pp.156
Multi-Depot Drone Arc Routing Problem and Solution Methods Altin I., Sipahioğlu A., Acar I. INFORMS Annual Meeting 2024, Washington, United States Of America, 20 - 23 October 2024, pp.82
Traffic Light Control with Policy Gradient-Based Reinforcement Learning Politika Gradyan Tabanlı Pekiştirmeli Öğrenme ile Trafik Işığı Kontrolü Taş M. B. H., ÖZKAN K., SARIÇİÇEK İ., YAZICI A. 32nd IEEE Conference on Signal Processing and Communications Applications, SIU 2024, Mersin, Turkey, 15 - 18 May 2024
Efficiency Calculation with Interval Type-2 Fuzzy Sets ERCAN TEKŞEN H. International Conference on Intelligent and Fuzzy Systems, INFUS 2024, Çanakkale, Turkey, 16 - 18 July 2024, vol.1090 LNNS, pp.606-613
Multi Objective Manta Ray Foraging Optimizer for a Home Health Care Routing Problem Buruk Şahin Y., Urazel B. The 3rd International Conference on Applied Mathematics in Engineering (ICAME’24), Balıkesir, Turkey, 26 - 28 June 2024, pp.132
TRAVELLING SALESMAN PROBLEM WITH HOTEL SELECTION AND THE CASE OF SAMSUN Algül B., Arapoğlu R. A. 12th International Congress on Engineering and Technology (ICET 2024), İstanbul, Turkey, 9 - 10 November 2024, pp.11
Multi-criteria Decision Making Problem Using Trapezoidal Pythagorean Fuzzy Sets ERCAN TEKŞEN H. International Conference on Intelligent and Fuzzy Systems, INFUS 2024, Çanakkale, Turkey, 16 - 18 July 2024, vol.1090 LNNS, pp.644-650
Assessing the Effectiveness and Efficiency of Selected Solution Approaches for Two-Dimensional Stock Cutting Problems (Part I): Case Study Printed Circuit Boards Ulutaş B., Ioannou G., Bracke S. 8th International Scientific-Technical Conference Manufacturing, MANUFACTURING 2024, Poznan, Poland, 14 - 16 May 2024, pp.107-121
Multi-Objective Solution Approaches for Ergonomic Assembly Line Balancing Problem with Hierarchical Worker Assignment Karaş Çelik A., Özçelik F. 29. Ulusal Ergonomi Kongresi, Çanakkale, Turkey, 12 - 14 October 2023, pp.21
Analysis of a Roadside Restaurant Using Queueing Network Models Arapoğlu R. A. 1st International Conference on Modern and Advanced Research, Konya, Turkey, 29 - 31 July 2023, pp.118
SALARY FORECAST FOR INDUSTRIAL ENGINEERS WITH MACHINE LEARNING ACCORDING TO VARIOUS CRITERIA Saraçlı Y., ÖZKAN N. F. 5. International Modern Scientific Research Congress, İstanbul, Turkey, 09 July 2023, pp.768-794
PRESENT AND FUTURE OF DIGITAL TWIN TECHNOLOGY Elik T., Yılmaz A., ÖZKAN N. F. 5. International Modern Scientific Research Congress, İstanbul, Turkey, 09 July 2023, pp.946-967
Uzel H. A., Gürcü A., Arapoğlu R. A. 10th International Congress on Engineering and Technology Management, İstanbul, Turkey, 14 - 15 October 2023, pp.217-225
A Bi-objective Optimization Model for Medical Waste Collection Problem Arapoğlu R. A. EurAsia Waste Management Symposium, İstanbul, Turkey, 24 - 26 October 2022, pp.556-562
E-ticaret Sektöründe Müşteri Kaybının Yapay Öğrenme Teknikleri ile Tahminlenmesi Yazır K., Alpay Ş. 2nd. GLOBAL CONFERENCE on ENGINEERING RESEARCH, Balıkesir, Turkey, 7 - 10 October 2022, pp.396-397
C-Control Charts with Neutrosophic Sets ERCAN TEKŞEN H. International Conference on Intelligent and Fuzzy Systems, INFUS 2021, İstanbul, Turkey, 24 - 26 August 2021, vol.308, pp.380-387
Elektrikli Araçlar İçin Rota Planlama Üzerine Bir Derleme ASLAN Ö., YAZICI A., SARIÇİÇEK İ. 2. International Black Sea Modern Scientific Research Congress, Rize, Turkey, 21 - 22 December 2022, pp.1-15
Bakım Planlaması İçin Anahtar Performans Göstergelerine Dayalı Bir Karar Destek Sistemi AKKURT T., SARIÇİÇEK İ. X. Uluslararası Katılımlı Bakım Teknolojileri Kongresi ve Sergisi, Denizli, Turkey, 20 October 2022, pp.37-46
A Skill-Based MILP Model in Cellular Manufacturing Systems with Human-Robot Collaboration YETKİN B. N., ULUTAŞ B. 10th IFAC Triennial Conference on Manufacturing Modelling, Management and Control (MIM), Nantes, France, 22 - 24 June 2022, vol.55, pp.1728-1733
Time - Constrained Touristic Route Planning: The Case of Eskisehir Arapoğlu R. A. 4th International Conference on Advanced Engineering Technologies (ICADET), Bayburt, Turkey, 28 - 30 September 2022, pp.478-482
An Artificial Bee Colony Algorithm for Assembly Line Worker Assignment and Balancing Problem Karaş Çelik A., Özçelik F. 5th International Conference on Industrial & Mechanical Engineering and Operations Management, IMEOM 2022, 26 - 28 December 2022, pp.298-307
SIRA BAĞIMLI STOKASTİK HAZIRLIK SÜRELİ VE ÇOK KADEMELİ PARALEL İŞLEMCİLİ AKIŞ ATÖLYELERİNDE ÇİZELGELEME PROBLEMİ İÇİN BİR ÇÖZÜM YAKLAŞIMI Sağır M., Ertem M. 41. YÖNEYLEM ARAŞTIRMASI VE ENDÜSTRİ MÜHENDİSLİĞİ ULUSAL KONGRESİ, Denizli, Turkey, 26 - 28 October 2022, vol.1, no.1, pp.1
Multi-criteria Decision Making Problem with Triangular Fuzzy Neutrosophic Sets ERCAN TEKŞEN H. International Conference on Intelligent and Fuzzy Systems, INFUS 2021, İstanbul, Turkey, 24 - 26 August 2021, vol.308, pp.364-370
A Comparison of Data Imputation Methods Utilizing Machine Learning for a New IoT System Platform KALAY S., ÇİNAR E., SARIÇİÇEK İ. 2022 8th International Conference on Control, Decision and Information Technologies (CoDIT), Turkey, 17 May 2022
Simulated Annealing Algorithm for In-Plant Milk-Run System Altın İ., Sipahioğlu A. International Conference of Production Research Americas 2020, Bahia Blanca, Argentina, 9 - 11 December 2020, pp.2561-2576
Sağlık Sektörü için Yeni Bir Karar Destek Sistemi ERBİÇER S., BURUK ŞAHİN Y. 40. Yöneylem Araştırması - Endüstri Mühendisliği Kongresi, İstanbul, Turkey, 04 July 2021
İki Amaçlı Çoklu Gezgin Satıcı Problemi için Üç Aşamalı Çözüm Yaklaşımı Günesen Akansu B., Kapanoğlu M. 3 rd International Congress on Human-Computer Interaction, Optimization and Robotic Applications, Artvin, Turkey, 11 - 13 June 2021, pp.28-29
Comparison of Three Travel Websites According to Cognitive Load and Usability Metrics YETKİN B. N., ÖZKAN N. F., YÜCEL G., SERT M. HORA 2021 - June 11-13, 2021 - Turkey (3rdInternational Congress on Human-Computer Interaction, Optimization and Robotic Applications), İstanbul, Turkey, 11 June 2021
Decreasing Defects Due To Burrs In The Door Inner Panel Of Dishwashers Through Kaizen Event ULUSKAN M. ISSRIS 21, Turkey, 22 February 2021
A Mathematical Model For Unrelated Parallel Machine Scheduling Problem With Additional Resources ŞAŞTIM Ö., HASGÜL S. EURO 2021: 27th European Conference on Operational Research, Atina, Greece, 11 June 2021
Facility Layout Design and a Decision Support System Creation in a Furniture Manufacturing Plant ULUSKAN M., OKYAY N., KAYA İ. IOCENS 21, Turkey, 05 July 2021
A Multi-Objective Approach for a Cubic Cell Formation with Quality Index BURUK ŞAHİN Y., URAZEL B. International Conference on Applied Mathematics in Engineering (ICAME), Balıkesir, Turkey, 01 September 2021
Dağıtım Operasyonlarında Kamyon-Dron Ekip Lojistiği Çalışmaları ÖZDEN G., SARIÇİÇEK İ. Yönetim Araştırmaları / Mühendislik Uygulamaları Sempozyumu, İstanbul, Turkey, 2 - 04 April 2021
Sustainable Supplier Selection Process Using EDAS Method BURUK ŞAHİN Y. INTERNATIONAL CONGRESS ON SCIENCES AND ENGINEERING FOR SUSTAINABILITY 2021, İstanbul, Turkey, 16 April 2021
The changing role of humans in new manufacturing systems ULUTAŞ B. International Conference on Industrial Engineering and Management (ICIEM 2021), Jaipur, India, 17 - 19 December 2021
A Worker Assignment and Assembly Line Balancing Model Considering Workforce Ageing Yetkin B. N., Ulutaş B. 26th ICPR (Virtual Conference) - Taichung, Taiwan Intelligent and Transformative Production in Pandemic Times, 18 - 21 July 2021
Efficiency Analysis of Countries During Covid-19 Pandemic Kıdak Ş. M., Arapoğlu R. A., Aktar Demirtaş E. International Symposium on Global Pandemics and Multidisciplinary Covid-19 Studies, Ankara, Turkey, 19 - 20 March 2021, pp.153
Development and Implementation of Ordering Process and Sampling Plan for Supplied Products ULUSKAN M., KÜREN E. GLOBCER 21, Turkey, 02 June 2021
A discrete differential evolution algorithm for unidirectional loop layout problem ÖZÇELİK F. International Conference on Advances in Engineering, Architecture, Science and Technology (ICA-EAST 2021), 15 December 2021
A mathematical model for stochastic unrelated parallel machine scheduling problem ERTEM M., ÖZÇELİK F., SARAÇ T. 5th International Symposium on Multidisciplinary Studies and Innovative Technologies, ISMSIT 2021, 21 October 2021
Multi-criteria Decision Making Problem with Intuitionistic Fuzzy Sets: A Novel Ranking Method ERCAN TEKŞEN H. INFUS 2020, 21 - 23 July 2020
Impact of Supplier Selection Criteria on Final Product Quality: A Structural Equation Modeling Analysis ULUSKAN M., AKIN KARAGÖZ Ş. GLOBCER 21, Turkey, 02 June 2021
A DSS for Assessing the Health Performance: The Case of City Hospitals Demirel H., BURUK ŞAHİN Y. International Conference on Applied Mathematics in Engineering (ICAME), Balıkesir, Turkey, 01 September 2021
A Literature Review on Human-Robot Collaborative Environments Considering Ergonomics Yetkin B. N., Ulutaş B. GJCIE 2021 Virtual Global Joint Conference on Industrial Engineering and Its Application Areas, 30 October 2021
Intuitionistic Fuzzy C-Control Charts Using Fuzzy Comparison Methods ERCAN TEKŞEN H., ANAGÜN A. S. INFUS 2019, 21 - 23 July 2019
Medical Waste Collection Problem: A Case Study in Eskişehir Arapoğlu R. A. 5th EurAsia Waste Management Symposium (EWMS) 2020, İstanbul, Turkey, 26 - 28 October 2020, pp.660-665
SELECTION OF MEDICAL WASTE TREATMENT CENTERS USING ANP CHEN X., LI X., SAĞIR M. International Symposium on the Analytic Hierarchy Proces, Pittsburgh, United States Of America, 3 - 06 December 2020
A Likelihood Method for the Comparison of Intuitionistic Trapezoidal Fuzzy Numbers ERCAN TEKŞEN H. INFUS 2019, 21 - 23 July 2019
Evaluation of the Learning Management System Selection Criteria Using Analytic Network Process Arapoğlu R. A., Yıldız A. 6th International Conference on Harmony Search, Soft Computing and Applications (ICHSA 2020), İstanbul, Turkey, 16 - 17 July 2020, pp.46
Productivity Improvement at Motor Vehicle Inspection Station by using Taguchi Approach Arapoğlu R. A. 5th EurAsia Waste Management Symposium (EWMS) 2020 , İstanbul, Turkey, 26 - 28 October 2020, pp.441-445
Spherical fuzzy c-control charts ERCAN TEKŞEN H. Developments of Artificial Intelligence Technologies in Computation and Robotics, Cologne, Germany, 18 - 21 August 2020
PERFORMANCE EVALUATION OF A MOTOR VEHICLE INSPECTION STATION BY USING SIMULATION Arapoğlu R. A. 3. INTERNATIONAL 19 MAY INNOVATIVE SCIENTIFIC APPROACHES CONGRESS, Samsun, Turkey, 16 - 19 May 2020, pp.91-92
A Heuristic Approach for Sequential Dependent Set-Up Timed Multi-Stage Hybrid Flow ShopScheduling Problem, International Symposium on the Mathematical Programming, ISMP 2015,Pittsburgh, (2015)(with H. D. Okul) SAĞIR M., OKUL H. D. 22nd International Symposium on Mathematical Programming (ISMP), 12 December - 15 July 2015
Simulated Annealing Algorithm for 1-M-1 Pickup and Delivery Problem SİPAHİOĞLU A., ALTIN İ., YAZICI A. ECCO 2019, St. Julian’xxs, Malta, 30 May - 01 June 2019
Conversational systems for family health history collection for geriatric population Ponathil A., ÖZKAN N. F., Jeffrey B., Brandon W., MAdathil K. C. Human Factors and Ergonomics Society 2019 Annual Meeting, United States Of America, 28 October - 01 November 2019, vol.63, pp.47-48
SEZGİSEL BULANIK ARİTMETİK VE GEOMETRİK ORTALAMA HESAPLAMALARI ERCAN TEKŞEN H. BİLTEK 2019, 21 - 22 December 2019
Application of Analytic Network Process to the Interview Examination in an Air Traffic Control Department ÖZDEMİR M., SAĞIR M. 25th International Conference on Multiple Criteria Decision Making, İstanbul, Turkey, 17 - 21 June 2019
Bir İşletmede Özdeş Olmayan Paralel Makine Çizelgeleme Problemi için Bir Çözüm Önerisi ve Uygulama TEZCAN Ş., ÜNER Ş., SAĞIR M. YAEM 2019, Ankara, Turkey, 12 - 14 June 2019, pp.109
A Metaheuristic Algorithm for In-Plant Milk-Run System ALTIN İ., SİPAHİOĞLU A. 5th International Researchers, Statisticians and Young Statisticians Congress, 18 - 20 October 2019
Pilotaj Bölümü Eğitim Uçuşlarının Çizelgelenmesi için Ardışık Çalışacak İki Matematiksel Model Önerisi ve Bir Uygulama Beyoğlu M. A., Yıldırım Ç., SAĞIR M. YAEM 2019, Ankara, Turkey, 12 - 14 June 2019, pp.110
Heterogeneous Fixed Fleet Vehicle Routing Problem and An Application Arapoğlu R. A., Yıldız A. 39. Yöneylem Araştırması ve Endüstri Müh. Ulusal Kongresi, Ankara, Turkey, 12 - 14 June 2019, pp.57-58
Comparing Usability of User Interfaces to Collect Family Health History Ponathil A., ÖZKAN N. F., Jeffrey B., Brandon W., MAdathil K. C. MedInfo 2019, Lyon, France, 25 - 30 August 2019, vol.264, pp.2005-2006
A Method for 1-M-1 Pickup and Delivery Problem with Robust Paths ALTIN İ., SİPAHİOĞLU A., YAZICI A. VEROLOG 2019, Sevilla, Spain, 3 - 05 June 2019
ARALIK TİP-2 BULANIK ARİTMETİK VE GEOMETRİK ORTALAMAHESAPLAMALARI ERCAN TEKŞEN H. ISASOR 2019, 5 - 06 December 2019
ROSA and a questionnaire based approach to assess job satisfaction of office workers ULUTAŞ B., ÖZKAN N. F. 5th International Conference on Engineering Sciences, 19 September 2019
Efficiency and effectivity of high precision grinding manufacturing processes: An approach based on combined DEA and cluster analyses Bracke S., Radetzky M., Rosebrock C., ULUTAŞ B. 12th CIRP Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME), Naples, Italy, 18 - 20 July 2018, vol.79, pp.292-297
A Mathematical Model for In-Plant Milk-Run Routing ALTIN İ., SİPAHİOĞLU A. 16. International Logistics and Supply Chain Congress, 18 - 20 October 2018
Design of Experiments Based Six Sigma DMAIC Application: Electrostatic Powder Coating Process ULUSKAN M. 2019 3rd International Symposium on Multidisciplinary Studies and Innovative Technologies (ISMSIT), Ankara, Turkey, 11 - 13 October 2019
Sustainability versus efficiency of manufacturing process: structured comparison of two high precision fine grinding process Radetzky M., Grams L., Bracke S., ULUTAŞ B. 25th International Conference on Production Research Manufacturing Innovation: Cyber Pyhsical Manufacturing, Chicago, United States Of America, 9 - 14 August 2019
İlişkisiz Paralel Makine Çizelgeleme Probleminde Hazırlık ve Proses Aşamalarında İlave Kaynak Kullanımı ŞAŞTIM Ö., HASGÜL S. 39. Yöneylem Araştırması ve Endüstri Mühendisliği Ulusal Kongresi, YA/EM 2019, 12-15 Haziran 2019, Ankara, Turkey, 12 June 2019
Evaluation of Undergraduate Graduation Projects using Best - Worst Method Yıldız A., Arapoğlu R. A. 39. Yöneylem Araştırması ve Endüstri Müh. Ulusal Kongresi, Ankara, Turkey, 12 - 14 June 2019, pp.75-76
A mathematical model determining additional trains into current timetable under operational restrictions of a railway station AKYOL ÖZER E., SARAÇ T. 2019 3rd International Symposium on Multidisciplinary Studies and Innovative Technologies (ISMSIT), Ankara, Turkey, Turkey, 11 - 13 October 2019
Considering product life cycle stages and worker skill level in seru production systems Süer A. G., ULUTAŞ B., Kaku I., Yin Y. 25th International Conference on Production Research Manufacturing Innovation: Cyber Pyhsical Manufacturing, Chicago, United States Of America, 9 - 14 August 2019
Kaynak kısıtı altında paralel makine çizelgeleme problemi için bir matematiksel model AKYOL ÖZER E., SARAÇ T. Yöneylem Araştırması ve Endüstri Mühendisliği Kongresi, Turkey, 26 - 29 June 2018
MAZERET/TELAFİ SINAVI ÇİZELGELEME PROBLEMİ İÇİN BİR HEDEF PROGRAMLAMA MODELİ ERDOĞAN H., SARAÇ T., ÖZÇELİK F. YAEM 2018, Eskişehir, Turkey, 26 - 29 June 2018, pp.12
Program Accreditation: An ANP model for accreditation criteria prioritization with dependencies SAĞIR M. ISAHP 2018, ÇİN, Hong Kong, 12 - 15 July 2018
A genetic algorithm for solving stochastic single machine scheduling problem ÖZÇELİK F., ERTEM M., SARAÇ T. XIII Balkan Conference on Operational Research (BALCOR 2018), Belgrade, Serbia, 25 - 28 May 2018
Iterated Local Search Algorithm for the Quadratic Assignment Problem ALTIN İ., SİPAHİOĞLU A. 29. European Conference on Operational Research, 8 - 11 July 2018
AUGMENTED LAGRANGIAN BASED SOLUTION METHOD FOR ONE-DIMENSIONAL CUTTING STOCK AND ASSORTMENT PROBLEM KASIMBEYLİ N., SARAÇ T., KASIMBEYLİ R. 6th International Conference on Control and Optimization with Industrial Applications (COIA), Baku, Azerbaijan, 11 - 13 July 2018, pp.225-227
Endüstri 4.0 Uygulamaları ile Endüstri Mühendisliği Eğitimi İlişkisi: ESOGU Endüstri Mühendisliği Bölümü Örneği SERTEL E., BURUK ŞAHİN Y., İşlier A. 38. Yöneylem Araştırması Endüstri Mühendisliği (38. YA/EM) Ulusal Kongresi, Turkey, 26 - 29 June 2018
Occupational risk assessment for coil slitting set up operators ULUTAŞ B., Ulutas I. B. 31th International Seminar of Ergonomics (ISET 2018), Poznan, Poland, 23 - 25 May 2018
Artificial Neural Network Modelling for Mode Choice Prediction in Transportation Planning KARA Ç., ÖZDEN G., KARACASU M., SARIÇİÇEK İ. 7th Current Debates in Social Sciences, İstanbul, Turkey, 19 - 21 April 2018, pp.101-110
Tahmin Yöntemleri için Karar Destek Sistemi Tasarımı Küçükbaş D., Aktar Demirtaş E. 38. YA'EM Ulusal Kongresi, Eskişehir, Turkey, 26 - 29 June 2018, pp.85
A multi choice conic goal programming approach for the optimization of cuscrore control chart parameters for the IMA(1,1) time series data Işık Ö. C., Aktar Demirtaş E. CMES 2018, Girne, Cyprus (Kktc), 4 - 06 May 2018
A combined customer and supplier logistics problem for acompany: A mathematical model SAĞIR M. 4th International Researchers, Statisticians And Young StatisticiansCongress, 28 - 30 April 2018, vol.1, pp.106
Improving the interior design of an overhead crane cabin: a steel industry case Ulutas I. B., ULUTAŞ B. 31th International Seminar of Ergonomics (ISET 2018), Poznan, Poland, 23 - 25 May 2018
Bi-Objective Optimization of an Unrelated Parallel Machine Scheduling Problem with Sequence-Dependent Setup Times BURUK ŞAHİN Y. International Conference on Applied Mathematics in Engineering (ICAME), Balıkesir, Turkey, 27 June 2018
Demontaj hat dengeleme probleminin çözümünde kullanılan metasezgisel yaklaşımlar DENİZ N., ÖZÇELİK F. 38. Yöneylem Araştırması Endüstri Mühendisliği Ulusal Kongresi (YAEM 2018), Eskişehir, Turkey, 26 - 29 June 2018
UNIQUE: THE SURVEY OF THE REMARKABLE BREADTH OF DR. THOMAS L. SAATY’S WORKS SAĞIR M. ISAHP 2018, ÇİN, Hong Kong, 15 - 17 July 2018
Milk-Run Rotası Belirlemede Bir Model Önerisi ALTIN İ., SİPAHİOĞLU A. 38. Yöneylem Araştırması Endüstri Mühendisliği Ulusal Kongresi, Turkey, 26 - 29 June 2018
A Mixed Integer Linear Programming Model for the Customer Order Scheduling Problem in Flexible Flowshop Environment SİPAHİOĞLU A., Aladağ A. OR 2018, Brussels, Belgium, 12 - 14 September 2018
An Artificial Neural Network Coupled with Genetic Algorithm to Optimize Biosurfactant Production Parameters SARAÇ T., ANAGÜN A. S., ÖZÇELİK F., AYTAR ÇELİK P., Toptaş Y., Şener B., et al. Balcor2018, XIII Balkan Conference on Operational Research, Belgrade, Serbia, 25 - 28 May 2018
Threshold Accepting Algorithm for the Capacitated P-Median Problem ALTIN İ., SİPAHİOĞLU A. 4. International Researchers, Statisticians and Young Statisticians Congress, 28 - 30 April 2018
Convergence analysis study to determine required number of scenarios to represent uncertainty of sequence dependent setup times for machine scheduling problem ERTEM M., SARAÇ T., ÖZÇELİK F. International Conference on Applied Analysis and Mathematical Modeling, ICAAMM18, İstanbul, Turkey, 20 - 24 June 2018
Hava Sahası Uçuş Seviyesi Optimizasyonu ÇEÇEN R. K., SARAÇ T., ÇETEK C. 38. Yöneylem Araştırması Endüstri Mühendisliği Ulusal Kongresi, Eskişehir, Turkey, 26 - 29 June 2018
Forming zones in a tandem design AGV system based on cell formation principles ULUTAŞ B. The 60th Diamond Jubilee National Convention of IIIE and International Conference on “Role of Industrial Engineering in Industry 4.0 Paradigm” (ICIEIND), Bhubaneswar, India, 27 - 30 September 2018
Determining Task Assignment Priorities For Disassembly Line Balancing Problem with ELECTRE DENİZ N., ÖZÇELİK F. 16th International Logistics and Supply Chain Congress (LMSCM 2018), Denizli, Turkey, 18 - 20 October 2018, pp.273-284
How Should I Choose My Dentist? A Preliminary Study Investigating the Effectiveness of Decision Aids on Healthcare Online Review Portals Khasawneh A., Ponathil A., ÖZKAN N. F., Madathil K. C. Human Factors and Ergonomics Society Annual Meeting, United States Of America, 1 - 05 October 2018, vol.62, pp.1694-1698
Bi-objective Optimization of Cuscore Control Chart parameters : A Case Study for IMA (1,1) Viscosity Data Aktar Demirtaş E. IRSYSC-2018, İzmir, Turkey, 28 - 30 April 2018
The contest of knowledge,machine and human factors in Industry 4.0 ULUTAŞ B. The 60th Diamond Jubilee National Convention of IIIE and International Conference on “Role of Industrial Engineering in Industry 4.0 Paradigm” (ICIEIND), Bhubaneswar, India, 27 - 30 October 2018
Multicriteria Decision Making Methods for Admission to an AirTraffic Control Department SAĞIR M., ÖZDEMİR M. 4th International Researchers, Statisticians And Young StatisticiansCongress, İzmir, Turkey, 28 - 30 April 2018, vol.1, pp.116
Statistical Process Control for the Furnice Cavity and Its Components Işık Ö. C., Aktar Demirtaş E. CMES 2018, Girne, Cyprus (Kktc), 4 - 06 May 2018
Assessing work related musculoskelatal disorders in metal industry ULUTAŞ B., ÖZKAN N. F., KAHYA E. UGAL International Conference - Multidisciplinary HUB for Higher Education Internationalization by Means of Innovative Interaction with the Labour Market and Society, 26 - 27 October 2018
Type 2 Fuzzy Control Charts Using Likelihood and Deffuzzification Methods ERCAN TEKŞEN H., Anagun A. S. 10th Conference of the European-Society-for-Fuzzy-Logic-and-Technology (EUSFLAT) / 16th International Workshop on Intuitionistic Fuzzy Sets and Generalized Nets (IWIFSGN), Warszawa, Poland, 11 - 15 September 2017, vol.643, pp.405-417
Plastik enjeksiyon kalıplarının yan sanayilere atanması problemi SARAÇ T., ÖZÇELİK F. 38. Yöneylem Araştırması Endüstri Mühendisliği Ulusal Kongresi (YAEM 2018), Eskişehir, Turkey, 26 - 29 June 2018
New Approaches to Collecting Family Health History – A Preliminary Study Investigating the Efficacy of Conversational Systems to Collect Family Health History Ponathil A., ÖZKAN N. F., Bertrand J., Welch B., Madathil K. C. Human Factors and Ergonomics Society Annual Meeting, United States Of America, 1 - 05 October 2018, vol.62, pp.277-281
Reliability Analysis of Logistics Network under Period Based Resource Allocations Ndiaye M., ERTEM M. IEEE International Conference on Technology Management, Operations and Decisions (ICTMOD), Marrakech, Morocco, 21 - 23 November 2018, pp.257-261
An Investigation of the Usability Issues of a Family Health History Compiling Application Ponathil A., ÖZKAN N. F., Bertrand J., Welch B., Madathil K. C. Human Factors and Ergonomics Society Annual Meeting, United States Of America, 1 - 05 October 2018, vol.62, pp.1699-1703
Heterojen Filolu Açık Araç Rotalama Problemi ARAPOĞLU R. A., YILDIZ A. 38. Yöneylem Araştırması Endüstri Mühendisliği Ulusal Kongresi (YAEM 2018 ), Turkey, 26 - 29 June 2018
Multi-Objective Optimization of a Parallel Machine Scheduling Problem Using Epsilon Constraint Method BURUK ŞAHİN Y. International Conference on Applied Mathematics in Engineering (ICAME), Balıkesir, Turkey, 27 June 2018
Concept for analysing product sustainability regarding eco-related product perception and efficiency within a product spectrum Bracke S., ULUTAŞ B., Rosebrock C. 14th Global Conference on Sustainable Manufacturing (GCSM), Stellenbosch, South Africa, 3 - 05 October 2016, vol.8, pp.28-35
Assignment of the plastic injection molds to supplier firms SARAÇ T., ÖZÇELİK F. International Conference on Applied Analysis and Mathematical Modeling, İstanbul, Turkey, 3 - 07 July 2017
BİR MONTAJ HATTINDA İSTASYONLARIN ARA STOK YÖNETİMİ İÇİN BİR YAKLAŞIM DEMİREL N., ÖZMEN E., SAĞIR M. YAEM 2017 ULUSAL KONGRESİ, İstanbul, Turkey, 5 - 07 July 2017
Additive Manufacturing Techniques Selection for Investment Casting Applications with integrated fuzzy AHP and TOPSIS Approach ÖZKAN B., BAŞ H., YAPICI F., SARIÇİÇEK İ. 1st International Symposium on Multidisciplinary Studies and Innovative Technologies, 2 - 04 November 2017
Assessing physical and environmental factors in a home appliance manufacturing facility ULUTAŞ B. 2nd Asian Conference on Ergonomics and Design (ACED), Chiba, Japan, 1 - 04 June 2017
A differential evolution algorithm for single model U-type assembly line balancing problem ÖZÇELİK F. The 12th Metaheuristics International Conference, MIC 2017, Barselona, Spain, 4 - 07 July 2017
The bottleneck multi-resource generalised assignment problem with agent and resource eligibility restrictions ÖZÇELİK F., SARAÇ T. International Symposium for Production Research 2017, Viyana, Austria, 13 - 15 September 2017
Biosurfactant Production From an Isolate From Hydrocarbon Polluted Soil ŞENER B., AYTAR ÇELİK P., TOPTAŞ Y., SARAÇ T., ÖZÇELİK F., ANAGÜN A. S., et al. 4th International Conference on Microbial Diversity, Bari, Italy, 24 - 26 October 2017
A Fuzzy Inference Method based on Logistic Regression for Diabetes Diagnosis ERCAN TEKŞEN H., DENİZ N. 5th International Fuzzy Systems Symposium, 14 - 15 October 2017
A Decision Support System for the Prevention of Urban Crime ALTIN İ., KAPANOĞLU M. 3RD INTERNATIONAL RESEARCHERS, STATISTICIANS AND YOUNG STATISTICIANS CONGRESS, 24 - 26 May 2017
Human 4.0 in the Industry 4.0 DENİZ N. International Symposium on Industry 4.0 and Applications, Karabük, Turkey, 12 - 14 October 2017
Employment Dimension of Social Capital: Evaluation of Job Search Channels Parlaktuna İ., Saraç T., Meçik O., Aybek E. C. 3rd International Annual Meeting of Sosyoekonomi Society, Ankara, Turkey, 28 - 29 April 2017, pp.333-336
Savunma Sistemlerine Ait Problemlerin Çözümlerinde, Endüstri Mühendisliği ve Yöneylem Araştırması Yaklaşımları Başkan O., Sağır M. 2. ULUSLARARASI SAVUNMA SANAYİ SEMPOZYUMU, Kırıkkale, Turkey, 6 - 08 April 2017, vol.15, no.133, pp.10-13
Stochastic scheduling of workforce-constrained preventive maintenance activities in petroleum plants AWAD M., ERTEM M. 2017 Annual Reliability and Maintainability Symposium (RAMS), 23 - 26 January 2017
Erkek Egemen Mühendislik Dünyasından Ev İdaresine Göç Eden Bir Mülteci: Lillian Moller Gilbreth DENİZ N. 1th International Women Research Symposium, 13 - 14 October 2017
Material Selection by Using Electre Method for FDM ÖZKAN B., BAŞ H., SARIÇİÇEK İ., KORKUNÇ M., YAPICI F. International Conference on Engineering Technologies, 7 - 09 December 2017
Mathematical Models and Solution Methods for Multiobjective One-dimensional Cutting and Assortment Problems KASIMBEYLİ N., SARAÇ T., KASIMBEYLİ R. ICCESEN-2017 4 th International Conference on Computational and Experimental Science and Engineering, 4 - 08 October 2017, pp.449
T. C. Saglık Bakanlıgı Kamu Hastaneleri Birliginde Talep Tahmini ve Stok Yönetimiiçin Bir Sistem Önerisi DEMİREL N., GUZEL N., SAĞIR M. YAEM 2017, İstanbul, Turkey, 5 - 07 July 2017
A Novel to Approach to Quantify the Risk Probabilities for a Risk Analysis Methodology ÖZKAN N. F., Uluta B. H. 7th International Conference on Applied Human Factors and Ergonomics (AHFE) / International Conference on Social and Occupational Ergonomics, Florida, United States Of America, 27 - 31 July 2016, vol.487, pp.341-347
Analysis of Geo-spatial Criteria for Landfill Site Selection: A Literature Review ÖZKAN B., SARIÇİÇEK İ., ERBAŞ M., ÖZCEYLAN E. 1st International Symposium on Multidisciplinary Studies and Innovative Technologies, 2 - 04 November 2017
Savunma Sistemlerine Ait Problemlerin Çözümlerinde, Endüstri Mühendisliği ve Yöneylem Araştırması Yaklaşımları BAŞKAN O., SAĞIR M. 2. Uluslararası Savunma Sanayi Sempozyumu, 6 - 08 April 2017
Assessing sustainable manufacturing related problems for marble facilities: an application Ayber S., ULUTAŞ B. 14th Global Conference on Sustainable Manufacturing (GCSM), Stellenbosch, South Africa, 3 - 05 October 2016, vol.8, pp.129-135
A two-stage stochastic programming approach for stochastic single machine scheduling problem ERTEM M., SARAÇ T., ÖZÇELİK F. International Conference on Applied Analysis and Mathematical Modeling, İstanbul, Turkey, 3 - 07 July 2017
Platform Allocation to Trains for Prague Main Station AKYOL ÖZER E., Bulicek J., SARAÇ T. Transport Means 2017, Kaunas, Lithuania, 20 - 22 September 2017
Assesing Knowledge and Behaviour of Medicine Leaflets Use for University Studends ÖZKAN N. F., ULUTAŞ B. 3RD INTERNATIONAL RESEARCHERS, STATISTICIANS AND YOUNG STATISTICIANS CONGRESS, 24 - 26 May 2017
Bir Projelendirme Firmasında Personelin Islere Tahsisi için Karar Destek Sistemi Tasarımı SAĞIR M., KARAMANLI H. YAEM 2017, İstanbul, Turkey, 5 - 07 July 2017
From the Point of a Tower Crane Operator’s View: Use ofan Eye-Tracker in Construction Sites ULUTAŞ B., ÖZKAN N. F. The 2nd Asian Conference on Ergonomics and Design (ACED) 2017, 1 - 04 June 2017
Optimization of turning operations using multi criteria decision making methods SOFUOĞLU M. A., ARAPOĞLU R. A., ORAK S. 2017 International Conference on Industrial Engineering and Industrial Management(CIEIM 2017), 3 - 05 January 2017
Type 2 Fuzzy Control Charts Using Ranking Methods ERCAN TEKŞEN H., ANAGÜN A. S. FUZZYSS 2017, 14 - 15 October 2017
Assessing musculoskeletal discomfort of forklift drivers in a warehouse ULUTAŞ B., ÖZKAN N. F. 2nd International Mediterranean Science and Engineering Congress, Adana, Turkey, 25 - 27 October 2017
İşgücü Piyasası İçin Bir Sosyal Sermaye Puanı Hesaplama Önerisi Parlaktuna İ., Saraç T., Meçik O., Aybek E. C. AASRC-ARF-IAU Joint International Academic Congress, İstanbul, Turkey, 25 - 26 October 2017
3D Printer Selection for Industrial Design Offices by Using DEMATEL-VIKOR Based Approach. BAŞ H., ÖZKAN B., YAPICI F., SARIÇİÇEK İ. 1st International Symposium on Multidisciplinary Studies and Innovative Technologies, 2 - 04 November 2017
Cuscore control chart parameter optimization for detecting special signals in IMA (1,1) time series Işık Ö. C., Aktar Demirtaş E. 3rd IRSYSC 2017, Konya, Turkey, 24 - 26 May 2017
A New Formulation for the Close Open Mixed VRP ARAPOĞLU R. A., YILDIZ A. 28th European Conference on Opreational Research, 3 - 06 July 2016
Role of Human Capital and Social Capital to Strengthen Employment of ESOGÜ Engineering and Architecture Faculty Graduates Parlaktuna İ., Saraç T., Meçik O., Aybek E. C. 2nd International Conference on Social Sciences and Education Research, İstanbul, Turkey, 4 - 06 November 2016, pp.165
Bir Projelendirme Firmasında Personelin İşlere Tahsisi Problemi İçin 0 1 Tamsayılı Matematiksel Model Önerisi ŞAŞTIM Ö., SAĞIR M. ULUSLARARASI KATILIMLI 16. ÜRETİM ARAŞTIRMALARI SEMPOZYUMU, İstanbul, Turkey, 12 - 14 October 2016, vol.111, pp.1010-1016
BELEDİYE EKMEK SATIŞ BÜFELERİ İÇİN YER SEÇİMİ VE BÜFE BÖLGE EŞLEŞMESİ PROBLEMİ ÇÖZÜM ÖNERİSİ SAĞIR M., KIRKIK E., MELEKŞAH E. YÖNEYLEM ARAŞTIRMASI VE ENDÜSTRİ MÜHENDİSLİĞİ 36.ULUSAL KONGRESİ, İzmir, Turkey, 13 - 15 July 2016
Operators Assignment in Cellular Manufacturing Systems A Review of Recent Applications BURUK ŞAHİN Y., ALPAY Ş. Global Joint Conference on Industrial Engineeringand Its Application Areas, İstanbul, Turkey, 14 - 15 July 2016
A Hybrid Genetic Algorithm for Optimizing a Closed Loop Supply Chain Network Inspired by Automotive Recycling YILDIZBAŞI A., SİPAHİOĞLU A. LM-SCM 2016 16. International Logistics and Supply Chain Congress, İzimir, Turkey, 1 - 02 December 2016
A Framework to Assign Forklift Drivers to Relevant Duties Based on Physical and Cognitive Factors ÖZKAN N. F., ULUTAŞ B. Global Joint Conference on Industrial Engineering and Its Application Areas 2016, İstanbul, Turkey, 14 - 15 July 2016
Coral Reefs Optimization Algorithm's Suitability for Dynamic Cell Formation Problem DENİZ N., ÖZÇELİK F. Global Joint Conference on Industrial Engineering and Its Application Areas 2016, İstanbul, Turkey, 14 - 15 July 2016, pp.300-304
A VRP Based Mathematical Model for Airspace Sectorization SİPAHİOĞLU A., Temizkan Ş. OR 2016 - International Conference on Operations Research, Hamburg, Germany, 30 August - 02 September 2016
A New Mathematical Model towards the Integration of CellFormation and Part Scheduling BURUK ŞAHİN Y., ALPAY Ş. Global Joint Conference on Industrial Engineeringand Its Application Areas, 14 - 15 July 2016
Kan Dağıtım Araçlarında Rotalama Matematiksel Model ve Melez Sezgisel Algoritma ile Bir Çözüm Önerisi SAĞIR M., HAVVA K., TOPBAŞ K. Yöneylem Araştırması ve Endüstri Mühendisliği 36. Ulusal Kongresi, İzmir, Turkey, 13 - 15 July 2016
Türkiye'deki 81 ilin iş kazaları ve meslek hastalıkları açısından veri zarflama yöntemi ile değerlendirilmesi ULUTAŞ B. 17th International Symposium on Econometrics, Operations Resarch and Statistics, 2 - 04 May 2016
Coral Reef Optimization Algorithm s Suitability for Dynamic Cell Formation Problem DENİZ N., ÖZÇELİK F. GLOBAL JOINT CONFERENCE ON INDUSTRIAL ENGINEERINGANDITS APPLICATION AREAS, 14 - 15 July 2016
Sağlık Sistemlerinde Peryodik Tedavi Süreçlerini Çizelgeleme SAĞIR M., KIRKIZOGLU I., DEMİREL N., ÖZMEN E. Yöneylem Araştırması ve Endüstri Mühendisliği 36. Ulusal Kongresi, İzmir, Turkey, 13 - 15 July 2016
A MATHEMATICAL MODELLING APPROACH FOR MULTI OBJECTIVE MULTI STAGE HYBRID FLOW SHOP SCHEDULING PROBLEM SAĞIR M. International Symposium on the Analytic Hierarchy Process, Londrina, Brazil, 4 - 07 August 2016
A review of reverse logistics studies and assessing future trends for Turkey Kocabaş M., ULUTAŞ B. Global Joint Conference on Industrial Engineering and Its Application Areas 2016, 14 - 15 July 2016
The use of full factorial design for modeling the effects of process parameters on decolorization of Reactive Yellow by using Fe ZrO2 catalyst AŞÇI Y., AKTAR DEMİRTAŞ E., AYAS N. Desalination for the Environment:Clean Water and Energy, 22 - 26 May 2016
A COMPARATIVE STUDY OF SCALARIZATION TECHNIQUES ON THE BI OBJECTIVE SET COVERING PROBLEM DENİZ N., SARAÇ T. XIV. International Logistics and Supply Chain Congress, 1 - 02 December 2016
A Decision Support System for Multi-Door Cross Docking Centers ÖZDEN G., SARIÇİÇEK İ. 3rd International Conference on Computational and Experimental Science and Engineering (ICCESEN-2016), İstanbul, Turkey, 19 - 24 October 2016
A novel approach to quantify the risk probabilities for a risk analysis methodology ÖZKAN N. F., ULUTAŞ B. AHFE 2016 International Conference, United States Of America, 27 - 31 July 2016
A Comparative Study of Scalarization Techniques on the bi Objectıve Set Coverıng Problem DENİZ N., SARAÇ T. The 14th International Logistics and Supply Chain Congress (LM-SCM 2016), 1 - 02 December 2016
Medyada Yayın Akışı Çizelgeleme Yöneylem Araştırması Teknikleri ile Çözüm Önerisi SAĞIR M., ECRİN Ö. Yöneylem Araştırması ve Endüstri Mühendisliği 36. Ulusal Kongresi, İzmir, Turkey, 13 - 15 July 2016
EXPERIMENTAL INVESTIGATION OF CHATTER VIBRATION PREVENTION METHODS IN TURNING OPERATIONS Sofuoğlu M. A., Orak S., Arapoğlu R. A. CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL, İstanbul, Turkey, 10 - 13 May 2016
A differential evolution algorithm for the single row layout problem ÖZÇELİK F. The 18th International Conference on Industrial Engineering, Seul, South Korea, 10 - 12 October 2016
Contribution for analysing, saving and prioritising of lessons learned issues regarding product improvement and future product generations Bracke S., Inoue M., ULUTAŞ B. 13th Global Conference on Sustainable Manufacturing - Decoupling Growth from Resource Use, Binh Dong New City, Vietnam, 16 - 18 September 2015, vol.40, pp.179-184
Integrated consumption and provision map implementation in healthcare sector DENİZ N., ÖZÇELİK F. Global Joint Conference on Industrial Engineering and Its Application Areas 2016, İstanbul, Turkey, 14 - 15 July 2016, pp.257-266
Use of an eye-tracker to assess workers in ceramic tile surface defect detection Ozkan F., ULUTAŞ B. 3rd International Conference on Control, Decision and Information Technologies (CoDIT), St Pauls Bay, Malta, 6 - 08 April 2016, pp.88-91
Methods of Manufacturing Planning Prevention of failures Simulation Tools ULUTAŞ B. 1st Symposium on Computational Reliability Engineering (CRE) in Product Development and Manufacturing, Düsseldorf, Germany, 21 - 23 October 2015
Çok amaçlı akış tipi üretim çizelgeleme problemi için bir NSGA II algoritması SARAÇ T., Doğan N. Yöneylem Araştırması ve Endüstri Mühendisliği 35. Ulusal Kongresi (YAEM2015), Turkey, 9 - 11 September 2015
Fuzzy MCDM Usage in Healthcare Service Quality Literature DENİZ N. The 4th International Fuzzy Systems Syposium, 5 - 06 November 2015
Ameliyathane Sistemlerinde Sıra Bağımlı Stokastik Süreli Çizelgeleme Yaklaşımı YILDIRIM SÖYLEMEZ E., HASGÜL S. YA/EM 2015: Yöneylem Araştırması ve Endüstri Mühendisliği 35. Ulusal Kongresi, Ankara, Turkey, 9 - 11 September 2015, pp.255
Kimyasal Bir Süreçte Özel Sinyallerin Belirlenmesine Yönelik Bir Yaklaşım Işık Ö. C., Aktar Demirtaş E. 35. Ulusal YAEM Kongresi, Ankara, Turkey, 9 - 11 September 2015
Determining Relative Efficiency of Turkish Provinces According to their Resource Utilization by Classic and Fuzzy Data Envelopment and Analysis DENİZ N., PEKER K. Ö. The 4th International Fuzzy Systems Symposium, 5 - 06 November 2015
A Fuzzy Multi Objective Programming Model for the Single Period Stochastic Inventory Problem ÖĞÜTLÜ A. S., HASGÜL S. The 4th International Fuzzy Systems Symposium, İstanbul, Turkey, 5 - 06 November 2015, pp.113-116
Assessing undesirable outputs on the performance measurement of cement manufacturing facilities ULUTAŞ B., ÖZKAN N. F. Joint International Symposium of 44th International Conference on Computers and Industrial Engineering and 9th International Symposium of Intelligent Manufacturing and Service Systems (CIE44 & IMSS’14), İstanbul, Turkey, 14 - 16 October 2014
Havayolu Seyahatleri için Robust Tasarım Yoluyla Bir Kullanıcı Arayüzü Geliştirilmesi BURUK ŞAHİN Y., Shadmand A., Azadiamin S. Yöneylem Araştırması ve Endüstri Mühendisliği Kongresi, Ankara, Turkey, 9 - 11 September 2015
Assesing Undesirable outputs on the performance measurement of cement manufacturing facilities ULUTAŞ B., ÖZKAN N. F. 44th International Conference on Computers and Industrial Engineering, 14 - 16 October 2014
Evaluating ideal medicine leaflet design to enhance usability ÖZKAN N. F., ULUTAŞ B. Joint International Symposium of 44th International Conference on Computers and Industrial Engineering and 9th International Symposium of Intelligent Manufacturing and Service Systems (CIE44 & IMSS’14), İstanbul, Turkey, 14 - 16 October 2014
Dijital Ortamdaki İlaç Prospektüslerinin Göz Takip Cihazı ile Değerlendirilmesi ULUTAŞ B., ÖZKAN N. F. 21. Ulusal Ergonomi Kongresi, Turkey, 2 - 04 October 2015
OECD Ülkelerinin İstihdamda Kadının İşteki Durumunun ELECTRE Yöntemiyle Karşılaştırılması Sarıçiçek İ., Parlaktuna İ. 5th International Conference on Gender Studies, Gazimagusa, Cyprus (Kktc), 25 - 27 March 2015
Müşteri Öcelikli Araç Rotalama Problemi için İki Aşamalı Bir Çözüm Yaklaşımı SAĞIR M., BURUK ŞAHİN Y., AKTAR DEMİRTAŞ E. YAEM 2015, Ankara, Turkey, 9 - 11 September 2015
Subtour Elimination Constraints for TSP with Sparse Distance Matrix SİPAHİOĞLU A. EURO 2015, 27th European Conference on Operational Research, Glasgow, United Kingdom, 12 - 15 July 2015
A Computer Program for Underground Mining Method Selection by Using TOPSIS and Yager s Method ALPAY Ş., YAVUZ M. 2015 Aachen International Mining Symposium, Aachen, Germany, 27 - 28 May 2015
Hizmet Sektöründe İyileştirme Önceliklerinin Servqual Temelli Kalite Evi ile Belirlenmesi Aktar Demirtaş E., Kaya Ş. 35. Ulusal YAEM Kongresi, Ankara, Turkey, 9 - 11 September 2015
İki amaçlı tek devrelik stokastik stok problemine bulanık çözüm yaklaşımı ÖĞÜTLÜ A. S., HASGÜL S. YA/EM 2015: Yöneylem Araştırması ve Endüstri Mühendisliği 35. Ulusal Kongresi, Ankara, Turkey, 9 - 11 September 2015, pp.254-255
Robust cell design with product life cycle consideration ULUTAŞ B., AHMET GÜRSEL S. 45th Computers and Industrial Engineering Conference, Metz, France, 28 - 30 October 2015
Açık Araç Rotalama Problemi ve Tavlama Benzetimi ile Çözümünde Farklı Komşuluk Yapılarının İncelenmesi YILDIZ A., ARAPOĞLU R. A. Yöneylem Araştırması ve Endüstri Mühendisliği (YAEM) 35. Ulusal Kongresi, Ankara, Turkey, 9 - 11 September 2015
Müşteri Öncelikli Araç Rotalama Problemi için İki Aşamalı Bir Çözüm Yaklaşımı Sağır M., Buruk Şahin Y., Aktar Demirtaş E. 35. Yöneylem Araştırması ve Endüstri Mühendisliği Kongresi, Ankara, Turkey, 9 - 11 September 2015
A Model for Helicopter Routing Problem SİPAHİOĞLU A., Çelik G. LM-SCM2014, 30 - 31 October 2014
Assessing the number of cells for a cell formation problem ULUTAŞ B. 15th IFAC Symposium on Information Control Problems in Manufacturing, Ottawa, Canada, 11 - 13 May 2015, vol.48, pp.1122-1127
A Bi objective Mathematical Model for Train Platforming Problem AKYOL E., SARAÇ T. 23th International Conference on Multiple Criteria Decision Making (MCDM2015), 2 - 07 August 2015
Çok Amaçlı 1 5 Boyutlu Kesme ve Ana Malzeme Seçimi Problemi için Bir Çözüm Yaklaşımı SARAÇ T., SAĞIR M. YAEM 2015, Ankara, Turkey, 9 - 11 September 2015
A bi objective parallel machine scheduling problem under resource constraints SARAÇ T., AKYOL E. 23th International Conference on Multiple Criteria Decision Making (MCDM2015), Hamburg, Germany, 2 - 07 August 2015
Bir kutu fabrikasında standart kağıt enlerinin belirlenmesi SARAÇ T., SAĞIR M. Yöneylem Araştırması ve Endüstri Mühendisliği 35. Ulusal Kongresi (YAEM2015), Turkey, 9 - 11 September 2015
Katmanlı Ağlarda İmha ve Koruma Sentezine Yönelik Matematiksel Modelleme Yaklaşımı İVGİN M., ARAPOĞLU R. A. Yöneylem Araştırması ve Endüstri Mühendisliği (YAEM) 35. Ulusal Kongresi, Turkey, 9 - 11 September 2015
Dijital ortamdaki ilaç prospektüslerin göz takip cihazı ile değerlendirilmesi ULUTAŞ B., ÖZKAN N. F. 21. Ulusal Ergonomi Kongresi, Isparta, Turkey, 2 - 04 October 2015
Three phase approach for cellular design considering product life cycle stages ULUTAŞ B., AHMET GÜRSEL S. 15th IFAC/IEEE/IFIP/IFORS Symposium Information Control in Manufacturing (INCOM 2015), 11 - 13 May 2015
An iterated local search algorithm for fixed p hub location and routing problems HASGÜL S., KARTAL Z., ERNST A. T. EURO 2015: 27th European Conference on Operational Research, Glasgow, United Kingdom, 12 - 15 July 2015, pp.52
Ofis Şartlarının Çalışanlar Üzerindeki Fiziki Uygunluğunun İncelenmesi ÖZKAN N. F., Söylemez S., Eser Z. 21. Ulusal Ergonomi Kongresi, Turkey, 2 - 04 October 2015
Tek Ekipli Paralel Makinaların Çizelgelenmesi Problemi için Bir Genetik Algoritma BEKTUR G., SARAÇ T. Yöneylem Araştırması ve Endüstri Mühendisliği 35. Ulusal Kongresi (YAEM2015), Turkey, 9 - 11 September 2015
Türkiye ve AB 28 Ülkelerinde Kadının Meslek Grupları Temelinde ELECTRE Yöntemi ile Karşılaştırılması Parlaktuna İ., Sarıçiçek İ. 5th International Conference on Gender Studies, Gazimagusa, Cyprus (Kktc), 25 - 27 March 2015
Montaj Hattında Ergonomik İnceleme ve Düzenlemeler KAHYA E., Eryiğit B., Cerit M., ÖZKAN N. F. 21. Ulusal Ergonomi Kongresi, Turkey, 2 - 04 October 2015
A Heuristic Approach for Sequential Dependent Set Up Timed Multi Stage Hybrid Flow Shop Scheduling Problem SAĞIR M., OKUL H. D. ISMP 2015, Pittsburgh, United States Of America, 12 - 17 July 2015, pp.9
Bütünleşik ana dağıtım üssü ve eş zamanlı dağıtım toplamalı araç rotalama problemi için bir tavlama benzetimi algoritması HASGÜL S., KARTAL Z. YAEM 2015: Yöneylem Araştırması ve Endüstri Mühendisliği 35. Ulusal Kongresi, Ankara, Turkey, 9 - 11 September 2015, pp.140
A TWO-PHASED SOLUTION METHODOLOGY FOR CAPACITATEDMULTI VEHICLE ROUTING PROBLEM WITH TIME WINDOW AND CUSTOMER PRIORITIES A CASE FOR PHARMACY ROUTING Sağır M., Buruk Şahin Y., Aktar Demirtaş E. ISAHP 2014, Washington, United States Of America, 13 - 15 December 2014, pp.33
Reducing ambulance response time A Case Study SARAÇ T., AKYOL E. Joint Symposium of IMSS14 (14th International Symposium on Intelligent Manufacturing and Service System) and CIE44 (44th International Conference on Computers & Industrial Engineering), 14 - 16 October 2014
Integer Programming Formulations for Integrated Hub Location and Vehicle Routing Problems KARTAL Z., HASGÜL S., ANDREAS T E. INFORMS Annual Meeting 2014 San Francisco, San-Francisco, Costa Rica, 9 - 12 November 2014, vol.1, pp.367
A New Approach for Pickup and Delivery Problem SİPAHİOĞLU A., Çelik G. OR 2014, Aachen, Germany, 02 September 2014
A multi-criteria job evaluation method for a state bank Aktar Demirtaş E., Buruk Şahin Y., Sağır M. International Symposium on the Analytic Hierarcy Process, Washington, United States Of America, 29 June - 02 July 2014
Scheduling Injection Molding Machines SİPAHİOĞLU A., SARAÇ T. ECCO XXVII - CO 2014 Joint Conference, 1 - 03 May 2014
A TWO-PHASED MULTIOBJECTIVE MODEL FOR A SERVICE SYSTEM- An Application For A Touring Company Bektur G., Sağır M. ISAHP 2014, Washington, United States Of America, 13 - 15 December 2014, pp.33
Makespan Minimization for Parallel Machine Scheduling Problem AKYOL E., SARAÇ T. ECCO XXVII - CO 2014 Joint Conference, 1 - 03 May 2014
A REAL LIFE MULTI OBJECTIVE COURSE TIMETABLING MODEL WITH ANP AND CONIC SCALARIZATION Kamışlı Öztürk Z., Sağır M., Özçetin E., Kasımbeyli N., Alegöz M. ISAHP 2014, Washington, United States Of America, 13 - 15 December 2014, pp.138
A Preference Based Bottleneck Assignment Problem KAPANOĞLU M., ASUMAN S., ADAR N. Global Interdisciplinary Business-Economics Advancement Conference, FLORIDA CLEARWATER, United States Of America, 15 - 18 May 2014
DESIGN AND PRIORITIZATION USING THE AHP Saaty T. L., Sağır M., Begıcevıc Redep N. ISAHP 2014, Washington, United States Of America, 13 - 15 December 2014, pp.103
A two phased solution methodology for capacitated multi vehicle routing problem with time window and customer priorities a case for pharmacy routing Sağır M., Buruk Şahin Y., Aktar Demirtaş E. International Symposium on the Analytic Hierarcy Process, Washington, United States Of America, 29 June - 02 July 2014
A genetic algorithm for identical parallel machine scheduling problem with shared resources SARAÇ T., AKYOL E. ECCO XXVII - CO 2014 Joint Conference, Munich, Germany, 1 - 03 May 2014
CDMF-RELSUS concept: Reliable and Sustainable products - Influences on design, manufacturing, layout integration and use phase Bracke S., Inoue M., ULUTAŞ B., Yamada T. 21st CIRP Conference on Life Cycle Engineering (CIRP LCE), Trondheim, Norway, 18 - 20 June 2014, vol.15, pp.8-13
Türkiyede Eğitime Kadınlar Açısından ve Bölgeler Bazında Bir Çok Ölçütlü Bakış SARIÇİÇEK İ., ÖZDEN G. II. Kadın Araştırmaları Sempozyumu, Turkey, 2 - 04 May 2014
Depo alanlarında vinç kullanımının ergonomik açıdan değerlendirilmesi ÖZKAN N. F., ULUTAŞ B. 20. Ulusal Ergonomi Kongresi, Ankara, Turkey, 26 - 28 September 2014
Beyin Bilgisayar Arayüzlerinin Bilişsel Durum Takibinde Kullanımı ÖZKAN N. F., KAHYA E. 20. Ulusal Ergonomi Kongresi, Turkey, 26 - 28 September 2014
A Multi Objective Optimization Approach for Plastic Injection Molding Machine Scheduling Problem SARAÇ T., SİPAHİOĞLU A. 20th Conference of the International Federation of Operational Research Societies (IFORS2014), Barcelona, Spain, 13 - 18 July 2014
Use Of Fuzzy Mixed Integer Goal Programming Model To Solve The Truck Scheduling Problem In Multi Door Cross Docking Terminals ÖZDEN G., SARIÇİÇEK İ. CIE44 IMSS’14, İstanbul, Turkey, 14 - 16 October 2014
The Rationality of Punishment – Measuring the severity of crimes: An AHP-based orders-of-magnitude approach, ISAHP,Washington D.C. (2014)(with T.L. Saaty, J.Shang) SAATY T., SAĞIR M., Shang J. International Symposium on the Analytic Hierarchy Process, Washington, Kiribati, 29 June - 02 July 2014
Bir mobilya Fabrikasında Postür analizi Demir A., Durkaya E., KAHYA E., ÖZKAN N. F. 20. Ulusal Ergonomi Kongresi, Turkey, 26 September 2014 - 28 September 2013
A Statistical Experimental Design to Determine the Azo Dye Decolorization by the Heterogeneus Fenton Process Aşçı Y., Aktar Demirtaş E., Anagün S. 2nd International Conference on Recycling and Reuse, İstanbul, Turkey, 4 - 06 June 2014
Trametes versicolor ile lakkaz üretimi ve renk giderimi Taguchi ve BoxBehnken Yöntemlerinin Uygulaması GEDİKLİ S., BURUK ŞAHİN Y., APOHAN E., ÇABUK A., YEŞİLADA Ö., BURNAK N. 22. ULUSAL BİYOLOJİ KONGRESİ, Eskişehir, Turkey, 23 - 27 June 2014
A Multi Objective Truck Scheduling Problem with Fuzzy Time Windows ÖZDEN G., SARIÇİÇEK İ. 3rd International Eurasian Conference on Mathematical Sciences and Applications (IECMSA-2014), Vienna, Austria, 25 - 28 August 2014, pp.195
Cellular manufacturing layout design in a wheel rim manufacturing industry: A case study ÖZÇELİK F., EĞERCİOĞLU N., GÜLTEKİN M. 27th Conference of European Chapter on Combinatorial Optimization, Munich, Germany, 1 - 03 May 2014
APPLICATION OF MCDM METHODS FOR A GROUP OF NONHOLONOMIC MOBILE ROBOTS TO DETERMINE THE BEST ROUTE AND THE MOST SUITABLE ROBOT Sağır M., Yufka A. ISAHP 2014, Washington, United States Of America, 13 - 15 December 2014, pp.183
A Project Scheduling Algorithm Considering Resource Constraints and Seasonal Effects HASGÜL S., ATASEVER C. T. 20th Conference of the International Federation of Operational Research Societies, IFORS 2014, Barcelona, Spain, 13 - 18 July 2014, vol.1, pp.81-82
A hybrid solution method for generalized quadratic multiple knapsack problem SARAÇ T., SİPAHİOĞLU A. 26th European Conference on Operational Research (EURO/INFORMS2013), Roma, Italy, 1 - 04 July 2013
Haftalık ders programının oluşturulması problemi için bir matematiksel model Özak O., SARAÇ T. TMMOB IX. Endüstri İşletme Mühendisliği Kurultayı, Turkey, 6 - 07 December 2013
Assessing working environment and stressors in a garment company AYGÜN B., ÖZKAN N. F., ULUTAŞ B. International IIE Conference, İstanbul, Turkey, 26 - 28 June 2013
An Artificial Immune System Approach for Flexible Job Shop Scheduling Problem SİPAHİOĞLU A., Aladağ A. IEOM 2012, 3 - 06 July 2012
A Two Stage Approach for Plastic Injection Molding Machines Scheduling Problem SİPAHİOĞLU A., SARAÇ T., AKYOL E. XXXIV. International Conference on Industrial Engineering and Systems Management (ICIESM2013), Barselona, Spain, 14 - 15 October 2013
Determining the number and location of emerceny medical stations in Eskisehir AKYOL E., SARAÇ T. 39th International Conference of the EURO Working Group on Operational Research Applied to Health Services (ORAHS2013), İstanbul, Turkey, 7 - 12 July 2013
Bir servis sisteminde gerekli işgücü miktarının kuyruk modeli ve benzetim yardımıyla belirlenmesi BEKTUR G., HASGÜL S. Birleşik Yöneylem Araştırması ve Endüstri Mühendisliği 33. Ulusal Kongresi, İstanbul, Turkey, 26 - 28 June 2013, pp.65
Comparing the scalarization methods for bi objective assembly line scheduling problem AKYOL E., SARAÇ T. 22th International Conference on Multiple Criteria Decision Making (MCDM2013), Malaga, Spain, 17 - 21 June 2013
A hybrid algorithm for cell formation problem with alternative routings ÖZÇELİK F., SARAÇ T. 26th European Conference on Operational Research (EURO INFORMS), Roma, Italy, 1 - 04 July 2013
Assessing lean manufacturing implementations for an aviation company ULUTAŞ B., ÖZCAN D. International IIE Conference, İstanbul, Turkey, 26 - 28 June 2013
Tepebaşı Belediyesinin e atık toplama sisteminin kurulması aşamasında atık toplama alanlarının gerekli araç sayısının ve rotalarının belirlenmesi Kötek F., Uzar C., SARAÇ T. TMMOB IX. Endüstri İşletme Mühendisliği Kurultayı, Turkey, 6 - 07 December 2013
Goal Programming Approach to Workforce Scheduling Problem for a Restaurant BEKTUR G., HASGÜL S. 22nd International Conference on Multiple Criteria Decision Making, Malaga, Spain, 17 - 21 June 2013, vol.1, pp.228
Plastik parçalar üreten bir işletmede ambar tasarımı ve yerleşimi ERYILMAZ E., KÖSEOĞLU İ., ÖZÇELİK F. IX. Endüstri ve İşletme Mühendisliği Kurultayı, Eskişehir, Turkey, 6 - 07 December 2013, pp.207-215
Assesing working environment and stressorsin a garment company AYGÜN B., ÖZKAN N. F., ULUTAŞ B. International IIE Confernce, 2013, 26 - 28 June 2013
A genetic algorithm for a multi objective parallel machine scheduling problem with special process constraints SARAÇ T., Aydınbeyli Y. E., Koçanlı M. M. 22th International Conference on Multiple Criteria Decision Making (MCDM2013), Malaga, Spain, 17 - 21 June 2013
A Decision Support System For Parallel Machine Scheduling Using Simulated Annealing SARIÇİÇEK İ., ÖZDEN G., Kuzu M. E. XI. Balkan Conference on Operational Research, Belgrade, Serbia, 7 - 10 September 2013, pp.177-183
Scheduling the assambly lines of a plastic products manufacturer AKYOL E., SARAÇ T. 26th European Conference on Operational Research (EURO/INFORMS2013), Roma, Italy, 1 - 04 July 2013
Modeling and decision making for rug and carpet discard policies ULUTAŞ B. Joint German Society for Operations Research (GOR) and British Operational Research Society Decision Analysis Special Interest Group (DASIG) Conference, Hamburg, Germany, 23 - 24 September 2013
Performance Evaluation of Public and Private Medical Schools in Turkey ERCAN TEKŞEN H., ANAGÜN A. S., ustun k. EURO 2013, 1 - 04 July 2013
Integrated p hub center and vehicle routing problems ZUHAL K., HASGÜL S., ERNST A. T. EWGLA XX: The 20th EURO Working Group on Locational Analysis Meeting, Ankara, Turkey, 17 - 19 April 2013, vol.1, pp.33-34
Benzetim ile kesici takım verimliliğinin arttırılması SOFUOĞLU M. A., ARAPOĞLU R. A. Üretim araştırmaları sempozyumu, Turkey, 25 - 27 September 2013
Enhancing the Anti-Wear Performance of Nano-oil Additives by Using Mixture Design and Multi-Objective Optimization Buruk Şahin Y., Aktar Demirtaş E., Burnak N., Çelik O. N. 26th European Conference on Operational Research, Rome, Italy, 1 - 04 July 2013
A GREEDY GENETIC ALGORITHM FOR OPTİMUM BATCH FORMATION IN BATCH ANNEALING FURNACES KOÇ İ. O., KAPANOĞLU M. XIVth INTERNATIONAL SYMPOSIUM ON ECONOMETRICS, OPERATIONS RESEARCH AND STATISTICS, Herzegovina, Bosnia And Herzegovina, 24 - 28 May 2013, vol.1, pp.179
Assessing features of platform and derivative products in terms of similarity AYDIN M., ULUTAŞ B. International IIE Conference, İstanbul, Turkey, 26 - 28 June 2013
Maden ocaklarının ergonomik açıdan değerlendirilmesi bir uygulama EZERCELİ Ö., ÖZKAN N. F., ULUTAŞ B. 9. Endüstri - Işletme Mühendisliği Kurultayı, Eskişehir, Turkey, 06 December 2013 - 07 December 2014
İlaç Prospektüslerinin Kullanılabilirlik Açısından İncelenmesi ve Bir Uygulama ÖZKAN N. F., ULUTAŞ B. 19. Ulusal ERgonomi Kongresi, Turkey, 27 - 29 September 2013
Spor salonlarının ergonomi kuralları göz önünde bulundurularak değerlendirilmesi ULUTAŞ B., ÖZKAN N. F. 18. Ulusal Ergonomi Kongresi, Gaziantep, Turkey, 15 - 18 November 2012
Kamu Binalarının Yürüme Engelliler için Ulaşılabilirlik Açısından İncelenmesi Eskişehir ve Kütahya Örneği ÖZKAN N. F., ULUTAŞ B. 18. Ulusal Ergonomi Kongresi, Turkey, 15 - 18 November 2012
Multi Objective Modelling of Multi Product Multi Echelon Supply Chain via Goal Programming ÖZDEN G., SARIÇİÇEK İ. X. International Logistics and Supply Chain Congress, 8 - 09 November 2012, pp.535-543
Modified subgradient based hybrid algorithm for solving binary quadratic programming problems SARAÇ T., KASIMBEYLİ N., KASIMBEYLİ R. 25th European Chapter on Combinatorial Optimization (ECCO 2012), Antalya, Turkey, 26 - 28 April 2012
A mathematical model for project team formation problem in report writing course ÖZÇELİK F., SARAÇ T. 25th Conference of European Chapter on Combinatorial Optimization, Antalya, Turkey, 26 - 28 April 2012
E Ticaret Sitelerinin Kullanılarda Yarattığı Zihinsel İş Yükü Açısından İncelenmesi Eryaşar S., IŞIK Ö. C., ÖZKAN N. F. 18. Ulusal Ergonomi Kongresi, Turkey, 15 - 18 November 2012
Minimization of Unit Costs in Vitrified Product Processes by Response Surface Methodology-A Case Study Buruk Şahin Y., Aktar Demirtaş E., Ayva O. 8th International Sysmposium of Satistics, Eskişehir, Turkey, 11 - 13 October 2012
Gözetmen Atama Problemine Ergonomik Bir Yaklaşım ESOGÜ Örneği ÖZKAN N. F., Eryaşar S. 18. Ulusal Ergonomi Kongresi, Turkey, 15 - 18 November 2012
Decision Support System for Inventory Management in a Pharmaceutical Warehouse ARSLAN M., SARIÇİÇEK İ. 8. Uluslararası İstatistik Günleri Sempozyumu, 11 - 13 October 2012
Bor Madenciliğinde Meydana Gelen İş Kazalarının İstatisitksel Analizi IŞIK Ö. C., ÖZKAN N. F. 18. Ulusal Ergonomi Kongresi, Turkey, 15 - 18 November 2012
A servqual Approach to Analyze Hotel Service Quality Tutkun C., Çakır D., Aktar Demirtaş E. 8th International Sysmposium of Satistics, Eskişehir, Turkey, 11 - 13 October 2012
Tek sıralı yerleşim problemi için bir melez genetik algoritma ÖZÇELİK F. Yöneylem Araştırması ve Endüstri Mühendisliği 32. Ulusal Kongresi (YAEM 2012), İstanbul, Turkey, 20 - 22 June 2012
Evaluating office layouts by considering ergonomic principles ÖZKAN N. F., ULUTAŞ B. 25th Conference of European Chapter on Combinatorial Optimization (ECCO25), Antalya, Turkey, 26 - 28 April 2012
Quadratic multiple knapsack problem with setups and a solution approach for it Doğan N., Bilgiçer K., SARAÇ T. International Conference on Industrial Engineering and Operations Management (IEOM2012), 3 - 06 July 2012
Integration of allocation for hubs and multiple travelling salesman problem with simultaneous pick up and delivery KARTAL Z., HASGÜL S., ERNST A. T. VEROLOG 2012: First Annual Conference of The EURO Working Group on Vehicle Routing and Logistics Optimization, Bologna, Italy, 18 - 20 June 2012, vol.1, pp.102-103
Measuring the Service Quality of Cafeterias in a State University Karakaya İ., Aktar Demirtaş E. 8th International Sysmposium of Satistics, Eskişehir, Turkey, 11 - 13 October 2012
Lead and nickel biosorption with a dried fungal biomass isolated from lead mine drainage AYTAR ÇELİK P., SERAP G., BURUK ŞAHİN Y., ÇABUK A., BURNAK N. 15. EUROPEAN CONGRESS ON BIOTECHNOLOGY, 23 - 26 September 2012
Potential Research Areas of Mixture Design Problems: A Review of Recent Applications Buruk Şahin Y., Burnak N., Aktar Demirtaş E. 8th International Sysmposium of Satistics, Eskişehir, Turkey, 11 - 13 October 2012
Bir klima montaj hattında tek parça akış sisteminin iyileştirilmesi ve benzetim analizi 174 pp İstanbul Türkiye 20 22 Haziran 2012 DUYMUŞ B., KASIMBEYLİ O., HASGÜL S. YA/EM 2012: Yöneylem Araştırması ve Endüstri Mühendisliği 32. Ulusal Kongresi, İstanbul, Turkey, 20 - 22 June 2012, pp.174
A Variable Capacity Parallel Machine Scheduling Problem AKYOL E., SARAÇ T. International Conference on Industrial Engineering and Operations Management (IEOM2012), 3 - 06 July 2012
Biyosürfektan Üretici Bir İzolat İçin Plackett Burman İstatistiksel Analiz Yöntemi İle Besiyeri Bileşenlerinin Optimizasyonu ÇELİKDEMİR M., BURUK ŞAHİN Y., BURNAK N., ÇABUK A. 21. ULUSAL BİYOLOJİ KONRESİ, Turkey, 3 - 07 September 2012
Determination of Optimal Kitchen Faucet Styles by a New Genetic Algorithm", 12th International Symposium on Econometrics Statistics and Operations Research Aktar Demirtaş E., Özsoydan F. B. 12th International Symposium on Econometrics Statistics and Operations Research, Denizli, Turkey, 26 - 29 May 2011, pp.121-129
Effects of 2D online and 3D virtual world meeting spaces on the performance of a concept selection task by engineering design teams ÖZKAN N. F., Joel S G. 55th Annual Meeting of the Human Factors and Ergonomics Society, Las Vegas, United States Of America, 19 - 23 September 2011, vol.55, pp.1676-1680
Farklı niteliklere sahip işçiler için montaj hattı dengelemesinde ergonomik yaklaşım GÜNER B., HASGÜL S. 17. Ulusal Ergonomi Kongresi, Eskişehir, Turkey, 14 - 16 October 2011, pp.541-547
Heuristics for a single machine scheduling problem with bicriteria of total tardiness and makespan ÖZÇELİK F., SARAÇ T. 24th Conference of European Chapter on Combinatorial Optimization, Amsterdam, Netherlands, 30 May - 01 June 2011
Montaj işçilerinde görülen fiziksel rahatsızlıklar ve risk faktörleri üzerine bir çalışma GÜNER B., HASGÜL S. 17. Ulusal Ergonomi Kongresi, Eskişehir, Turkey, 14 - 16 October 2011, vol.1, pp.493-502
A genetic algorithm for single machine early/tardy problem: a case study SARAÇ T., ÖZÇELİK F. 24th European Chapter on Combinatorial Optimization, Amsterdam, Netherlands, 30 May - 01 June 2011
An Approach to a Combined Synthesize of Qualitative and Quantitative Factors: A Case Studyfor the Accreditation Process of Universities SAĞIR M. The International Higher Education Congress:New Trends and Issues UYK-2011, İstanbul, Turkey, 27 - 29 May 2011
A Particle Swarm Optimization for the Capacitated p-Median Problem ÖZSOYDAN F. B., SİPAHİOĞLU A. 12th International Symposium on Econometrics Statistics and Operations Research, Denizli, Turkey, 26 May 2011
ESOGÜ Endüstri Mühendisliği Bölümü Web Sitesinin Ergonomik Açıdan İncelenmesi ve Öneriler ÖZKAN N. F., ULUTAŞ B. 17. Ulusal Ergonomi Kongresi, Turkey, 14 - 16 October 2011
Neural Network Classification Approach to Explore User Senses About Kitchen Faucet Styles Aktar Demirtaş E., Kandemir C. M. 12th International Symposium on Econometrics Operations Research and Statistics, Denizli, Turkey, 26 - 29 May 2011
A Discrete Particle Swarm Optimization Algorithm for bi criteria Warehouse Location Problem ÖZSOYDAN F. B., SARAÇ T. 12th International Symposium On Econometrics Statistics and Operations Research (EYI), Denizli, Turkey, 26 - 29 May 2011
ESOGU EM bölümü web sitesinin ergonomik açıdan değerlenmesi ULUTAŞ B., ÖZKAN N. F. 17. Ulusal Ergonomi Kongresi, Eskişehir, Turkey, 14 - 16 October 2011
Cep Telefonlarından İnternete Erişimin Ergonomik Açıdan İncelenmesi ULUTAŞ B., ÖZKAN N. F. 17. Ulusal ERgonomi Kongresi, Turkey, 14 - 16 October 2011
A New Discrete Particle Swarm Optimization Design for the Multiple Depot Open Vehicle Routing Problem ÖZSOYDAN F. B., SİPAHİOĞLU A. 9th International Logistics & Supply Chain Congress, İzmir, Turkey, 27 October 2011
Evaluating the effect of teaching strategies and learning styles to students success ÖZKAN N. F., ULUTAŞ B. 5th International Computer & Instructional Technologies Symposium, Elazığ, Turkey, 20 - 22 September 2011
A GENETIC ALGORITHM FOR BICRITERIA SINGLE MACHINE SCHEDULING PROBLEM ÖZÇELİK F., SARAÇ T. International Conference on Modelling and Simulation (MS'10), Prague, Czech Republic, 22 - 25 June 2010, pp.341-345
Determining the parameters of MSG algorithm for multi period layout problem ULUTAŞ B., SARAÇ T. 2nd International Conference on Production and Industrial Engineering (CPIE-2010), 3 - 05 December 2010
Solving the quadratic knapsack problem using the linearized version of the MSG algorithm KASIMBEYLİ N., SARAÇ T., KASIMBEYLİ R. 24th Mini EURO Conference (MEC EurOPT 2010 ), 23 - 26 June 2010
New mathematical models for balance stability in U type assembly lines 233 pp Lisbon Portugal July 11 14 2010 GÜNER B., HASGÜL S. EURO XXIV: 24th European Conference on Operational Research, Lisbon, Portugal, 11 - 14 July 2010, vol.1, pp.233
Efficiency evaluation of private teaching institutions by Data Envelopment Analysis Üstün A., Aktar Demirtaş E. 24th European Conference on Operational Research, Lisbon, Portugal, 11 - 14 July 2010, pp.152
Subgradient based solution approach for cell formation problem with alternative routes SARAÇ T., ÖZÇELİK F. 24th Mini EURO Conference (MEC EurOPT 2010), İzmir, Turkey, 23 - 26 June 2010
Normal and Abnormal Non-Speech Audio Event Detection Using MFCC and PR-Based Feature Sets BARKANA B., UZKENT B., SARIÇİÇEK İ. International Conference on Management Science and Information Engineering, 17 - 19 December 2010, pp.201-205
Data Envelopment Analysis for Privatizing Decisions of Sugar Factories Aktar Demirtaş E., Üstün A. 24th European Conference on Operational Research, Lisbon, Portugal, 11 - 14 July 2010, pp.212
A Genetic Algorithm for course scheduling problem KAMIŞLI ÖZTÜRK Z., SAĞIR M. EURO 24, Lizbon, Portugal, 11 - 14 July 2010, pp.112
Solving the generalized quadratic multiple knapsack problem by using F MSG algorithm SİPAHİOĞLU A., SARAÇ T. 24th Mini EURO Conference (MEC EurOPT 2010 ), 23 - 26 June 2010
UMMSMADM A Computer Program for Underground Mining Method Selection by Multiple Attribute Decision Making Tools ALPAY Ş., YAVUZ M. 2010 SME Annual Meeting, PHOENIX, United States Of America, 28 February - 03 March 2010
Environmental Noise Source Classification Using Neural Networks BARKANA B., SARIÇİÇEK İ. Seventh International Conference on Information Technology: New Generations, 12 - 14 April 2010, pp.259-263
An upper bound for quadratic multiple knapsack problem SARAÇ T. 24th European Conference on Operational Research (EURO2010), Lizbon, Portugal, 5 - 08 July 2010
Sıralamaya bağımlı hazırlık sürelerinin varlığında paralel makine çizelgeleme problemi için iki aşamalı bir çözüm yaklaşımı SARAÇ T., Kirlik G. Yöneylem Araştırması ve Endüstri Mühendisliği 30. Ulusal Kongresi (YAEM2010), Turkey, 30 June - 02 July 2010
Performances of the ANN, SVM, and K-means clustering methods for recognizing different environmental sounds BARKANA B., SARIÇİÇEK İ., UZKENT B. EURO 24, Lisbon, Portugal, 10 - 15 July 2010
Solving the Generalized Quadratic Multiple Knapsack Problem by using F MSG Algoritm SİPAHİOĞLU A., SARAÇ T. 24th Mini Euro Conference, İzmir, Turkey, 23 - 26 June 2010
Exam scheduling: Parameter estimation with the ANP and mathematical modeling on thesolution, EURO 24, p.111, July 2010, Lisbon, Portugal (with Z. K. Ozturk). SAĞIR M., KAMIŞLI ÖZTÜRK Z. EURO 24, Lisbon, Portugal, 11 - 14 July 2010, pp.111
Bir işletmede yaratıcı problem çözme teorisi TRIZ kullanılarak üretim sisteminin iyileştirilmesi KARTAL Z., HASGÜL S. ÜAS 2009: 9. Ulusal Üretim Araştırmaları Sempozyumu, Eskişehir, Turkey, 15 - 17 October 2009, pp.71-78
A clonal selection algorithm for the quadratic multiple knapsack problem SARAÇ T., ULUTAŞ B. 23rd European Conference on Operational Research (EURO2009), Bonn, Germany, 5 - 08 July 2009
A new hybrid algorithm for quadratic knapsack problem SARAÇ T. 14th International Congress on Computational and Applied Mathematics (ICCAM2009), Antalya, Turkey, 29 September - 02 October 2009
A New Solution Approach for Multi Container Loading Problem SİPAHİOĞLU A., Kirlik G., SARAÇ T. 4th International Workshop on Freight Transportaion and Logistics (ODYSSEUS2009), 26 - 29 May 2009
Balancing U type assembly lines with heterogeneous workers 160 pp Bonn Germany July 5 8 2009 HASGÜL S., GÜNER B. EURO XXIII: 23rd European Conference on Operational Research, Bonn, Germany, 5 - 08 July 2009, vol.1, pp.160
Doğrusal olmayan matematiksel modellerin GAMS çözücüleri kullanılarak UÇT GSA algoritması ile çözülmesi SARAÇ T. Yöneylem Araştırması ve Endüstri Mühendisliği 29. Ulusal Kongresi (YA/EM'2009), Turkey, 22 - 24 June 2009
A two objective integer programming mathematical model for a one dimensional assortment problem KASIMBEYLİ N., SARAÇ T. 14th International Congress on Computational and Applied Mathematics (ICCAM2009), Antalya, Turkey, 29 September - 02 October 2009
Single Allocation P-Hub Median Problem to Monitor Land Borders by Using Unmanned Aircraft AKKUŞ Y., SARIÇİÇEK İ. International Joint Conferences on Computer, Information, and Systems Sciences, and Engineering, 4 - 12 December 2009
Which energy source to use A case study for Turkey ULUTAŞ B., SAĞIR M. INFORMS, İstanbul, Turkey, 6 - 10 July 2003
An analytical network process combined data envelopment analysis methodology to evaluate the performance of airports in Turkey ULUTAŞ B., ULUTAŞ B. B. International Symposium on the Analytic Hierarchy Process 2009, PITTSBURGH, United States Of America, 30 July - 01 August 2009
Tek yönlü dairesel bir üretim hattında ürün grupları seçimi problemi ERYAŞAR F. S., HASGÜL S. YA/EM 2009: Yöneylem Araştırması ve Endüstri Mühendisliği 29. Ulusal Kongresi, Eskişehir, Turkey, 22 - 24 June 2009, pp.162
An analytical network process model to evaluate the nature based disasters at Turkey ULUTAŞ B., SAĞIR M. International Symposium on the Analytic Hierarchy Process 2009, PITTSBURGH, United States Of America, 30 July - 01 August 2009
Sıra bağımlı hazırlık zamanlı ve çok amaçlı tek makine çizelgeleme problemi için sezgisel bir çözüm yöntemi SARAÇ T., ÖZÇELİK F. 9. Ulusal Üretim Araştırmaları Sempozyumu ÜAS 2009, Eskişehir, Turkey, 15 - 17 October 2009, pp.43-50
Evaluating the global threats for humanity An analytical network process model SAĞIR M., ULUTAŞ B. International Symposium on the Analytic Hierarchy Process 2009, PITTSBURGH, United States Of America, 30 July - 01 August 2009
Mathematical modeling for maximizing gate receipt problem ABDULHAMID N. H., SAĞIR M., KENDALL G. 4th Multidisciplinary International Scheduling Conference MISTA 2009, Dublin, Ireland, 10 - 12 August 2009, pp.709-714
Modeling the fuzzy goal programming for scheduling problem of single machine with sequence dependent set up times KIRIŞ Ş., SARAÇ T. 1st International Fuzzy Systems Symposium (FUZZYSS'09), 1 - 02 October 2009
Tabu Search for Parallel Machine Scheduling with Job Splitting Celik C., SARIÇİÇEK İ. 6th International Conference on Information Technology - New Generations (ITNG 2009), Nevada, United States Of America, 27 - 29 April 2009, pp.183-188
A sub gradient algorithm to solve dynamic facility layout problem ULUTAŞ B., SARAÇ T. The 5th International Symposium on Management, Engineering and Informatics (MEI 2009), 10 - 13 July 2009
A Clonal Selection Algorithm for Cell Formation Problem with Alternative Routings ULUTAŞ B., SARAÇ T. International Symposium on Group Technology and Cellular Manufacturing (GT/CM2009), 16 - 18 February 2009
A clonal selection algorithm for the quadratic mutiple knapsack problem SARAÇ T., ULUTAŞ B. 23rd European Conference on Operational Research (EURO2009), Bonn, Germany, 5 - 08 July 2009
Multi-robot sensor-based coverage path planning using capacitated arc routing approach PARLAKTUNA O., SİPAHİOĞLU A., Kirlik G., YAZICI A. IEEE International Conference on Control Applications/International Symposium on Intelligent Control, St Petersburg, Russia, 8 - 10 July 2009, pp.1146-1147
İnsan faktörünü dikkate alan U tipi montaj hattı dengeleme için bulanık hedef programlama yaklaşımı GÜNER B., HASGÜL S. ÜAS 2009: 9. Ulusal Üretim Araştırmaları Sempozyumu, Eskişehir, Turkey, 15 - 17 October 2009, pp.121-127
A Dynamic Path Planning Approach for Multi-Robot Sensor-Based Coverage Considering Energy Constraints YAZICI A., Kirlik G., PARLAKTUNA O., SİPAHİOĞLU A. IEEE RSJ International Conference on Intelligent Robots and Systems, Missouri, United States Of America, 10 - 15 October 2009, pp.5930-5931
Bir boyutlu kesme ve ana malzeme seçimi problemi için iki amaçlı tamsayılı bir matematiksel bir model KASIMBEYLİ N., SARAÇ T. Yöneylem Araştırması ve Endüstri Mühendisliği 29. Ulusal Kongresi (YA/EM'2009), Turkey, 22 - 24 June 2009
Evaluating the emotions of internet newspaper readers by kansei engineering Aktar Demirtaş E., Ulutaş B. 23rd European Conference on Operational Research (EURO2009), Bonn, Germany, 5 - 08 July 2009
The performance of clonal selection algorithm for cell formation problem compared to other nature based methods ULUTAŞ B., İŞLİER A. A. 4th International Conference of Group Technology/Cellular Manufacturing 2009, Kitakyushu, Japan, 16 - 18 February 2009
A mathematical model for generalization of unidirectional loop layout problem ÖZÇELİK F., İŞLİER A. A. The 6th International Symposium On Intelligent and Manufacturing Systems IMS’2008, Sakarya, Turkey, 14 - 17 October 2008, pp.309-316
A Sensor Based Coverage Approach in Dynamic Environment SİPAHİOĞLU A., YAZICI A., KİRLİK G., PARLAKTUNA O. 6th International Symposium on Intelligent Manufacturing Systems, İzmit, Turkey, 14 - 17 October 2008
An agent based framework for a multi robot project scheduling HASGÜL S., SARIÇİÇEK İ., ÖZKAN M., PARLAKTUNA O. IJIE 2008: International Journal of Industrial Engineering, Las Vegas, United States Of America, 7 - 10 September 2008, vol.1, pp.596-602
Agent-Based Shop-Floor Control System in a Dynamic Environment ALPAY Ş., SARIÇİÇEK İ. Fifth International Conference on Information Technology: New Generations, IEEE (ITNG2008), 7 - 09 April 2008, pp.414-419
Using AHP to optimize product mix in a multi bottleneck environment KARTAL Z., HASGÜL S. IJIE 2008: International Journal of Industrial Engineering, Las Vegas, United States Of America, 7 - 10 September 2009, vol.1, pp.283-289
A genetic algorithm for the generalized quadratic knapsack problem SARAÇ T., SİPAHİOĞLU A. 18th Triennial Conference of International Federation of Operational Research Societies (IFORS 2008 ), Sandton, South Africa, 13 - 18 July 2008
İnternet gazetelerinin ana sayfa tasarımında ergonomik faktörlerin incelenmesi ULUTAŞ B. 14. Ulusal Ergonomi Kongresi, Trabzon, Turkey, 30 October - 01 November 2008
Machine layout for closed-loop conveyors ÖZÇELİK F., İŞLİER A. A. 21st Conference of the European Chapter on Combinatorial Optimization, Dubrovnik, Croatia, 29 - 31 May 2008
Bir Sürücü Koltuğu için Müşteri İstek ve Beklentilerinin Kapsamlı Analizi: Müşteri Sesinin Modellenmesi Çabuk V., Aktar Demirtaş E., Köksal G., Üner B. II. Ulusal QFG Sempozyumu, İzmir, Turkey, 19 - 21 March 2008, pp.20-27
Two Stepped Approach For Container Loading Problem SARAÇ T., Kirlik G., SİPAHİOĞLU A. 6th International Symposium on Intelligent and Manufacturing Systems “Features, Strategies And Innovation” (IMS'2008), 14 - 16 October 2008
Alternative layout procedures for multi period production environments ULUTAŞ B., İŞLİER A. A. 12th International Conference on Information Processing and Management of Uncertainty in Knowledge Based Systems (IPMU), Malaga, Spain, 22 - 27 June 2008
U tipi montaj hatlarının dengelenmesinde ergonomik faktörlerin etkisi GÜNER B., HASGÜL S. YA/EM 2008: Yöneylem Araştırması ve Endüstri Mühendisliği 28. Ulusal Kongresi, İstanbul, Turkey, 30 June - 02 July 2008, pp.281
Plastik Enjeksiyon Makinalarının Çizelgelenmesi Problemi SARAÇ T. Yöneylem Araştırması ve Endüstri Mühendisliği XXVIII. Ulusal Kongresi (YA/EM'2008), Turkey, 30 June - 02 July 2008
Dinamik yerlesim problemleri için gelistirilen klonal seçim algoritması Ayakkabı sektöründe uygulama ULUTAŞ B., İŞLİER A. A. 28.Ulusal Yöneylem ve Endüstri Mühendisliği Kongresi, İstanbul, Turkey, 30 June - 02 July 2008
A genetic algorithm for manufacturing cell formation problems ÖZÇELİK F., SARAÇ T. The 6th International Symposium On Intelligent and Manufacturing Systems IMS’2008, Sakarya, Turkey, 14 - 17 October 2008, pp.302-308
Ürün karması belirleme probleminde kısıtlar teorisine dayanan çözüm yöntemlerinin incelenmesi KARTAL Z., HASGÜL S. YA/EM 2008: Yöneylem Araştırması ve Endüstri Mühendisliği 28. Ulusal Kongresi, İstanbul, Turkey, 30 June - 02 July 2008, pp.246
The performance of the modified subgradient algorithm on solving the 0-1 quadratic knapsack problem SİPAHİOĞLU A., SARAÇ T. 20th International Conference/Euro Mini Conference on Continuous Optimization and Knowledge-Based Technologies (EurOPT 2008), Neringa, Lithuania, 20 - 23 May 2008, pp.381-385
Mutfak Armatürü Tasarımında Kullanıcı Hislerinin Analizi ve Kullanıcıların Görsel Algılarına Göre Eniyi Tasarım Alternatiflerinin Belirlenmesi Aktar Demirtaş E., Anagün S., Köksal G. 7. Ulusal Üretim Araştırmaları Sempozyumu, Ankara, Turkey, 15 - 17 November 2007, pp.41
A decision support system for underground mining method selection ALPAY Ş., YAVUZ M. 20th International Conference on Industrial, Engineering and Other Applications of Applied Intelligent Systems, Kyoto, Japan, 26 - 29 June 2007, vol.4570, pp.334-335
Deciding on the ideal channel coefficients in Multi-Channel Manufacturing ÖZÇELİK F. 1st IEEE Symposium of Computational Intelligence in Multicriteria Decision Making, Hawaii, United States Of America, 1 - 05 April 2007, pp.115-121
Çok amaçlı sırt çantası problemi için bir genetik algoritma SARAÇ T., KAMIŞLI ÖZTÜRK Z. Yöneylem Araştırması ve Endüstri Mühendisliği XXVII. Ulusal Kongresi (YA/EM'2007), Turkey, 2 - 04 July 2007
Kamyon yükleme problemi için yükleme planlarının belirlenmesi Kirlik G., SARAÇ T., SİPAHİOĞLU A. Yöneylem Araştırması ve Endüstri Mühendisliği XXVII. Ulusal Kongresi (YA/EM'2007), Turkey, 2 - 04 July 2007
Kombilerde kumanda panellerinin ergonomik değerlendirilmesi AKSU Ö., ULUTAŞ B., EROL D. 13. Ulusal Ergonomi Kongresi, Kayseri, Turkey, 6 - 08 December 2007
Plastik enjeksiyon üretim sürecinde parça benzerliklerinin AHP yaklaşımı ile belirlenmesi SARAÇ T., SİPAHİOĞLU A. Yöneylem Araştırması ve Endüstri Mühendisliği XXVII. Ulusal Kongresi (YA/EM'2007), Turkey, 2 - 04 July 2007
Tesis yerlesim problemlerinde klonal ve psikoklonal seçim algoritmaları ULUTAŞ B., İŞLİER A. A. 27.Ulusal Yöneylem ve Endüstri Mühendisliği Kongresi, İzmir, Turkey, 2 - 04 July 2007
A knapsack model for the m plastic injection machine scheduling problem SARAÇ T., SİPAHİOĞLU A. 22nd European Conference on operational research (EURO XXII), Prague, Czech Republic, 8 - 11 July 2007
Cooperative decision-making with scheduler agents SARIÇİÇEK İ., Yuzugullu N. 4th International Conference on Cooperative Design, Visualization, and Engineering, Shanghai, China, 16 - 20 September 2007, vol.4674, pp.201-202
Analyzing a drum buffer rope scheduling system executability through simulation HASGÜL S., KARTAL Z. Summer Computer Simulation Conference 2007, San Diego, United States Of America, 15 - 18 July 2007, vol.1, pp.1243-1249
Eskisehir Osmangazi Üniversitesi Endüstri Mühendisliği dersliklerinin ergonomik analizi ULUTAŞ B., EROL D. 13. Ulusal Ergonomi Kongresi, Kayseri, Turkey, 6 - 08 December 2007
Bir işletmede hazırlık zamanı kaynaklı üretim kayıplarının azaltılması için sezgisel bir yaklaşım SAĞIR M., SARAÇ T., İphar S. Yöneylem Araştırması ve Endüstri Mühendisliği XXVII. Ulusal Kongresi (YA/EM'2007), Turkey, 2 - 04 July 2007
A quadratic aggrigate model for customer clustering and truck loading in logistic operations SİPAHİOĞLU A., SARAÇ T., Kirlik G. 22nd European Conference on operational research (EURO XXII), Prague, Czech Republic, 8 - 11 July 2007
An Integrated Approach to Explore User Preferences of Sink Mixers and Design Optimization Aktar Demirtaş E., Anagün S., Köksal G., Burnak N. EURO XXII, Praha, Czech Republic, 8 - 11 July 2007, pp.148
A genetic algorithm for the quadratic multiple knapsack problem SARAÇ T., SİPAHİOĞLU A. 2nd International Symposium on Brain, Vision and Artificial Intelligence, Naples, Italy, 10 - 12 October 2007, vol.4729, pp.490-492
Multiobjective Course SchedulingwithMathematical Programming and Analytic Network Process SAĞIR M. ISAHP Conference, Valparaíso, Chile, 3 - 06 August 2007
Parameter setting for clonal selection algorithm in facility layout problems ULUTAŞ B., Islier A. A. International Conference on Computational Science and Its Applications (ICCSA 2007), Kuala-Lumpur, Malaysia, 26 - 29 August 2007, vol.4705, pp.886-889
Optimization of performance of genetic algorithm for 0-1 knapsack problems using taguchi method Anagun A., SARAÇ T. ICCSA 2006: International Conference on Computational Science and Its Applications, Glasgow, England, 8 - 11 May 2006, vol.3982 LNCS, pp.678-687
Kısıtlar teorisi ilkelerinin bir üretim işletmesinde uygulanması KARTAL Z., HASGÜL S. ÜAS 2006: VI. Ulusal Üretim Araştırmaları Sempozyumu, İstanbul, Turkey, 22 - 23 September 2006, pp.389-399
A bi-criteria approach to loop layout problem ÖZÇELİK F., İŞLİER A. A. International Conference on Modeling and Simulation 2006, Konya, Turkey, 28 - 30 August 2006, vol.2, pp.1047-1051
Reallocation of the children according to their similarity dissimilarity a case study at the children protection society ULUTAŞ B., KIRIŞ Ş. 3rd International Conference of Group Technology/Cellular Manufacturing 2006, Groningen, Netherlands, 3 - 05 July 2006
An artificial immune system algorithm for single row layout problem ULUTAŞ B., İŞLİER A. A. 36th International Conference on Computers and Industrial Engineering, Taipei, Taiwan, 20 - 23 June 2006
Heuristic-based route planning approach for a homogeneous multi-robot team YAZICI A., SİPAHİOĞLU A., Parlaktuna O., Gurel U. IEEE International Symposium on Intelligent Control, Munich, Germany, 4 - 06 October 2006, pp.234-235
A study of factors affecting due date predictibility for on-time delivery in a dynamic job shop ALPAY Ş., Yuzugullu N. 19th Australian Joint Conference on Artificial Intelligence, Hobart, Australia, 4 - 08 December 2006, vol.4304, pp.1239-1240
Bir işletmede düz montaj hatları yerine U tipi hatların kullanılması ve U tipi montaj hattı dengeleme çalışması GÜNER B., HASGÜL S. ÜAS 2006: VI. Ulusal Üretim Araştırmaları Sempozyumu, İstanbul, Turkey, 22 - 23 September 2006, pp.675-686
Karesel sırt çantası problemi için subgradient temelli bir çözüm yaklaşımı SARAÇ T., SİPAHİOĞLU A. Yöneylem Araştırması ve Endüstri Mühendisliği XXVI. Ulusal Kongresi (YA/EM'2006), Turkey, 3 - 05 July 2006
Agent-based collaborative scheduling system SARIÇİÇEK İ., Yuzugullu N. 3rd International Conference on Cybernetics and Information Technologies, Systems and Applications/4th International Conference on Computing, Communications and Control Technologies, Florida, United States Of America, 20 - 23 July 2006, pp.147-152
A data envelopment analysis approach to evaluate performance of manufacturing cells KIRIŞ Ş., ULUTAŞ B. 3rd International Conference of Group Technology/Cellular Manufacturing 2006, Groningen, Netherlands, 3 - 05 July 2006
Tepkin çizelgeleme yaklaşımının akış tipi atölye ortamında etkinliğinin analizi BÜYÜKSÜNETÇİ A. S., HASGÜL S. YA/EM 2006: Yöneylem Araştırması ve Endüstri Mühendisliği 26. Ulusal Kongresi, İzmit, Turkey, 3 - 05 July 2006, pp.289-293
Resource leveling approach for multi robot task scheduling HASGÜL S., SARIÇİÇEK İ., ÖZKAN M., PARLAKTUNA O. 5th International Symposium on Intelligent Manufacturing Systems, Sakarya, Turkey, 29 - 31 May 2006, vol.1, pp.1191-1201
Priority Constrained Task Sequencing for Heterogeneous Mobile Robots ÖZKAN M., SARIÇİÇEK İ., PARLAKTUNA O., HASGÜL S. The 19th International Conference on Industrial, Engineering & Other Applications of Applied Intelligent Systems (IEA/AIE'06), Annecy, France, 27 - 30 June 2006, vol.4031, pp.393-399
A new approach to the dynamic layout problem ULUTAŞ B., İŞLİER A. A. 35th International Conference on Computers and Industrial Engineering, İstanbul, Turkey, 19 - 22 June 2005
Analytic Network Process and Goal Programming Approach for Multi-Period Lot-Sizing with Supplier Selection Aktar Demirtaş E., Üstün Ö. Computers and Industrial Engineering, İstanbul, Turkey, 19 - 22 June 2005, pp.513-518
Çok amaçlı 0 1 sırt çantası problemi için konik skalerleştirme yöntemi ile bir çözüm yaklaşımı SİPAHİOĞLU A., SARAÇ T. Yöneylem Araştırması ve Endüstri Mühendisliği XXV. Ulusal Kongresi (YA/EM'2005), Turkey, 4 - 06 July 2005
Artificial immune systems for group technology ULUTAŞ B. 1st International symposium on bio-inspired computing, Johor-Bahru, Malaysia, 5 - 07 September 2005
Simulation approach to performance comparison of multi-channel manufacturing and process layout: A case study ÖZÇELİK F. 35th International Conference on Computers & Industrial Engineering, İstanbul, Turkey, 19 - 22 June 2005
Simulation modeling and analysis of a new mixed model production lines HASGÜL S., Buyuksunetci A. 2005 Winter Simulation Conference (WSC 05), Florida, United States Of America, 4 - 07 December 2005, pp.1408-1412
Karar Vermede Analitik Serim Süreci ve Oyun Teorisi Yaklaşımı: Kıbrıs Sorunu Üstün Ö., Aktar Demirtaş E. YA/EM' 2004, Adana, Turkey, 15 - 18 June 2004, pp.151-153
Altı sigma uygulamalarında süreç modellemesi için benzetim yaklaşımı HASGÜL S., KENİR S., ÜNLE A. M. ÜAS 2004: IV. Ulusal Üretim Araştırmaları Sempozyumu, Konya, Turkey, 8 - 10 October 2004, pp.9-13
Belediyeler için bir karar destek sistemi KAMIŞLI ÖZTÜRK Z., SARAÇ T. Yöneylem Araştırması ve Endüstri Mühendisliği XXIV. Ulusal Kongresi (YA/EM'2004), Turkey, 15 - 18 June 2004
Eğitim kurumlarında karşılaşılan nöbet Çizelgesi hazırlama probleminde karar modeli kullanımı KAKMACI Ö., HASGÜL S. YA/EM 2004: Yöneylem Araştırması ve Endüstri Mühendisliği XXIV. Ulusal Kongresi, Gaziantep-Adana, Turkey, 15 - 18 June 2004, pp.250-252
Karma modelli montaj hatlarının üretim sürecine hazırlık çalışmalarında benzetim tekniğinin kullanılması BÜYÜKSÜNETÇİ A. S., HASGÜL S. ÜAS 2004: IV. Ulusal Üretim Araştırmaları Sempozyumu, Konya, Turkey, 8 - 10 October 2004, pp.3-8
Türkiye deki enerji kaynaklarının değerlendirilmesi ve tüketim yerlerine en uygun dağılımı ULUTAŞ B. 2. Ulusal Ege Enerji Sempozyumu ve Sergisi, Kütahya, Turkey, 26 - 28 May 2004
Solving the quadratic knapsack problem by using modified subgradient algorithim SARAÇ T., SİPAHİOĞLU A. International Conference on Continuous Optimization (ICOOPT I), 2 - 04 August 2004
Gezgin satıcı problemi için doğrusal olmayan bir matematiksel model ve çözüm yaklaşımı SİPAHİOĞLU A., ÖZTÜRK G., SARAÇ T. Yöneylem Araştırması ve Endüstri Mühendisliği XXIV. Ulusal Kongresi (YA/EM'2004), Turkey, 15 - 18 June 2004
A system dynamics approach: Higher education system in Turkey Ozturk Z., HASGÜL S. 2nd International Industrial Simulation Conference, Malaga, Spain, 7 - 09 June 2004, pp.420-423
Çok kriterli karma model montaj hattı sıralama problemlerinde yeni çözüm yöntemleri HASGÜL S., ÖZKUL A. E. YA/EM 2000: Yöneylem Araştırması ve Endüstri Mühendisliği XXI. Ulusal Kongresi, Gazimagusa, Cyprus (Kktc), 15 - 18 June 2004, pp.84-87
0 1 sırt çantası probleminin çözümünde genişletilmiş subgradient yönteminin kullanımı SARAÇ T., SİPAHİOĞLU A. Yöneylem Araştırması ve Endüstri Mühendisliği XXIV. Ulusal Kongresi (YA/EM'2004), Turkey, 15 - 18 June 2004
Tedarikçi Seçimi ve Sipariş Tahsisinde Analitik Serim Süreçleri ve Hedef Programlama Yaklaşımı Aktar Demirtaş E., Üstün Ö. YAEM' 2014, Adana, Turkey, 15 - 18 June 2004, pp.376-378
Sınav çizelgesi hazırlama problemlerinin çözümünde bir doğrusal olmayan karar modeli önerisi KAKMACI Ö., HASGÜL S. YA/EM 2004: Yöneylem Araştırması ve Endüstri Mühendisliği XXIV. Ulusal Kongresi, Gaziantep-Adana, Turkey, 15 - 18 June 2004, pp.64-66
Açıköğretim fakültesinde öğrenci sayısı tahmininde benzetim yaklaşımı HASGÜL S., KAMIŞLI ÖZTÜRK Z. YA/EM 2004: Yöneylem Araştırması ve Endüstri Mühendisliği XXIV. Ulusal Kongresi, Gaziantep-Adana, Turkey, 15 - 18 June 2004, pp.214-216
1 5 Boyutlu Malzeme Seçimi Problemi İçin Çok Ölçütlü Bir Karar Modeli ve Çözüm Yaklaşımı KASIMBEYLİ R., SİPAHİOĞLU A., SARAÇ T. Yöneylem Araştırması ve Endüstri Mühendisliği XXIV. Ulusal Kongresi (YA/EM'2004), Turkey, 15 - 18 June 2004
The Best Policy for European Union and Turkey Relationship: The Analytic Network Process SAĞIR M., ALİKALFA PINAR E. ISAHP 2003, Balvi, Latvia, 7 - 09 August 2003, pp.97-108
A Guideline for DSS System for Underground Mining Method Selection YAVUZ M., ALPAY Ş. 18th International Mining Congress and Exhibition of Turkey, Antalya, Turkey, 10 - 13 June 2003
A Genetic Algorithm for 1.5 Dimensional Assortment Problems Multiple Objectives SARAÇ T., SAĞIR M. IEA/AIE International conference on Industrial and Engineering Applications of Artificial Intelligence and Expert Systems, Loughborough, United Kingdom, 23 - 26 June 2003, pp.41-51
How to Create Priorities in Genetics, Proceedings of the 16th , SAĞIR M. IEA/AIE International conference on Industrial and Engineering Applications of Artificial Intelligence and Expert Systems, Loughborough, United Kingdom, 23 - 26 June 2003, pp.52-61
A genetic algorithm for 1,5 dimensional assortment problems with multiple objectives SARAÇ T., SAĞIR M. 16th International Conference on Industrial and Engineering Applications of Artificial Intelligence and Expert Systems, IEA/AIE 2003, Loughborough, United Kingdom, 23 - 26 June 2003, vol.2718, pp.41-51
Supplier Selection by Using an Integrated Approach: Analytic network Process and Linear Programming Aktar Demirtaş E. EURO/INFORMS 2003, İzmir, Turkey, 6 - 10 July 2003, pp.157
Beyond Inconsistency in the AHP/ANP, Proceedings of the7th International Symposium on the Analytic Hierarchy Process ISAHP (2003), , Bali, Indonesia. SAĞIR M. ISAHP 2003, Balvi, Latvia, 7 - 09 August 2003, pp.381-388
Group technology rationle to assign roommates in student dormitories ULUTAŞ B., İŞLİER A. A. Group Technology/Cellular Manufacturing World Symposium 2003, Colombes, France, 28 - 30 July 2003
A machine partition method in tandem design AGVS for real life applications ULUTAŞ B., SAĞIR M. 2nd International Conference on Responsive Manufacturing, Gaziantep, Turkey, 26 - 28 June 2002
A Machine Partition Method in Tandem Design AGVs for Real Life Applications, Proceedings of the ICRM, July 26-28 (2002), Gaziantep, Turkey (with B. Haktanirlar). SAĞIR M., HAKTANIRLAR B. Proceedings of the ICRM, Gaziantep, Turkey, 26 - 28 July 2002
Using the Analytic Hierarchy Process to Weight Different Objectives of Timetabling Problems SAĞIR M. ISAHP 2001, Bern, Switzerland, 2 - 04 August 2001, pp.325-332
Kesme problemlerinde son çalışmalar ve bir kutu fabrikasında standart kağıt enlerini belirleme problemi SARAÇ T., SAĞIR M. Yöneylem Araştırması ve Endüstri Mühendisliği XXI. Ulusal Kongresi (YA/EM'2000), Turkey, 12 - 14 June 2000
A review on AGV Systems ULUTAŞ B., SAĞIR M. 21.Ulusal Yöneylem ve Endüstri Mühendisliği Kongresi, Gazimagusa, Cyprus (Kktc), 12 - 14 June 2000
Çok seviyeli JIT üretim sistemlerinde karma modelli montaj hattı sıralama problemi için bir çözüm yöntemi HASGÜL S., ÖZKUL A. E. YA/EM-98: Yöneylem Araştırması/Endüstri Mühendisliği XIX. Ulusal Kongresi, Ankara, Turkey, 25 - 26 June 1998, pp.70
Integrated facility design using an evolutionary approach with a subordinate network algorithm Norman B. A., Smith A. E., Arapoglu R. A. 5th International Conference on Parallel Problem Solving from Nature, PPSN 1998, Amsterdam, Netherlands, 27 - 30 September 1998, pp.937-946
Min Max Approaches to the Faculty-Course Assignment Problem SAĞIR M., KARA İ. 2 nd International Conference on the Practice and Automated Timetabling PATAT’97, Toronto, Canada, 20 - 22 August 1997, pp.167-181

Published journal articles indexed by SCI, SSCI, and AHCI

Articles Published in Other Journals

Books & Book Chapters

Refereed Congress / Symposium Publications in Proceedings