Prof. Dr. OSMAN NURİ ÇELİK

Makaleler 40

1. The Effect of Graphite Particles as Lubricant Additive on the Friction and Wear Behaviour of AISI H11 Steel

ÜNLÜOĞLU O., ÇELİK O. N.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , sa.4, ss.1495-1503, 2022 (ESCI, TRDizin)

2. Lubricity assessment of ultra-low sulfur diesel fuel (ULSD), biodiesel, and their blends, in conjunction with pure hydrocarbons and biodiesel based compounds

Tat M. E., Çelik O. N., Er Ü., Gaşan H., Ulutan M.

International Journal of Engine Research , cilt.23, sa.2, ss.214-231, 2022 (SCI-Expanded, Scopus)

3. Improvement of the Machinability of Ti–6Al–4V Alloy Wire Electro Discharge Machining with Cryogenic Treatment

ÇAKIR F. H., ÇELİK O. N.

Metals and Materials International , cilt.27, sa.9, ss.3529-3537, 2021 (SCI-Expanded, Scopus)

4. Anisotropic mechanical and tribological properties of SiAlON matrix composites containing different types of GNPs

Baskut S., Sert A., Çelik O. N., Turan S.

Journal of the European Ceramic Society , cilt.41, sa.3, ss.1878-1890, 2021 (SCI-Expanded, Scopus)

5. Influence of Cryogenic Treatment on Microstructure and Mechanical Properties of Ti6Al4V Alloy

Çakır F. H., Çelik O. N.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , cilt.29, sa.10, ss.6974-6984, 2020 (SCI-Expanded, Scopus)

6. Influence of shallow and deep cryogenic treatment on the corrosion behavior of Ti6Al4V alloy in isotonic solution

ÖTEYAKA M. Ö., ÇAKIR F. H., ÇELİK O. N.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION , cilt.71, sa.7, ss.1206-1215, 2020 (SCI-Expanded, Scopus)

7. Tribological Properties of Cryo-Treated and Aged Ti6Al4V Alloy

Çakır F. H., Çelik O. N.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS , cilt.73, sa.3, ss.799-809, 2020 (SCI-Expanded, Scopus)

8. Effects of Al on the Phase Volume Fractions and Wear Properties in the AlxCoCrFeMoNi High Entropy Alloy System

Gaşan H., Lökçü E., Ozcan A., Çelik O. N., Çelikyürek İ., Ulutan M., et al.

METALS AND MATERIALS INTERNATIONAL , cilt.26, sa.3, ss.310-320, 2020 (SCI-Expanded, Scopus)

9. Tribological behavior of UHMWPE matrix composites reinforced with PTFE particles and aramid fibers

GÜRGEN S., ÇELİK O. N., KUŞHAN M. C.

COMPOSITES PART B-ENGINEERING , cilt.173, 2019 (SCI-Expanded, Scopus)

10. Characterization of the mechanism of cryogenic treatment on the microstructural changes in tungsten carbide cutting tools

SERT A., ÇELİK O. N.

MATERIALS CHARACTERIZATION , cilt.150, ss.1-7, 2019 (SCI-Expanded, Scopus)

11. Inspection of nickel-based boron carbide PTA coatings on AISI 4140 steel

Mehmet G. M., Çelik O. N.

INDUSTRIAL LUBRICATION AND TRIBOLOGY , cilt.71, sa.4, ss.548-556, 2019 (SCI-Expanded, Scopus)

12. Maintenance Error Detection Procedure and A Case Study of Failure Analysis Locomotive Diesel Engine Bearings

ÇAKIR F. H., SERT A., ÇELİK O. N., Dereoglu N.

JOURNAL OF FAILURE ANALYSIS AND PREVENTION , cilt.18, sa.2, ss.356-363, 2018 (ESCI, Scopus)

13. Effect of cryogenic treatment on the microstructure and the wear behavior of WC-Co end mills for machining of Ti6Al4V titanium alloy

Çelik O. N., Sert A., Gaşan H., Ulutan M.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.95, ss.2989-2999, 2018 (SCI-Expanded, Scopus)

14. A New Approach To Chip Breaking Application In Turning Operation Using Variable Feed Rates

ÇAKIR F. H., ÇELİK O. N.

Cumhuriyet Science Journal , cilt.38, sa.4, ss.188-196, 2017 (TRDizin)

15. Effect of heat treatment on the bending behavior of aluminum alloy tubes

SERT A., GÜRGEN S., ÇELİK O. N., KUŞHAN M. C.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , cilt.31, sa.11, ss.5273-5278, 2017 (SCI-Expanded, Scopus)

16. Effect of Isothermal Bainitic Quenching on Rail Steel Impact Strength and Wear Resistance

ÇAKIR F. H., ÇELİK O. N.

METAL SCIENCE AND HEAT TREATMENT , cilt.59, ss.289-293, 2017 (SCI-Expanded, Scopus)

17. The effects of cryogenic treatment on the toughness and tribological behaviors of eutectoid steel

ÇAKIR F. H., ÇELİK O. N.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , cilt.31, sa.7, ss.3233-3239, 2017 (SCI-Expanded, Scopus)

18. FRICTION AND WEAR BEHAVIOR OF PLASMA TRANSFERRED ARC COATING ON AISI 4140 STEEL OF BORON CARBIDE AND NICKEL POWDER MIXTURE

Ay G. M., Çelik O. N.

The Online Journal of Science and Technology , cilt.7, sa.1, ss.54-62, 2017 (Hakemli Dergi)

19. Modeling and analysis of the effects of nano-oil additives on wear properties of AISI 4140 steel material using mixture design

BURUK ŞAHİN Y., ÇELİK O. N., Burnak N., AKTAR DEMİRTAŞ E.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY , cilt.230, sa.4, ss.442-451, 2016 (SCI-Expanded, Scopus)

20. ADHESIVE WEAR BEHAVIOR OF TIN AND CRNCOATED DIN115CRV3 STEEL TOOLS AT DIFFERENT LOAD CONDITIONS

ÖTEYAKA M. Ö., Yıldırım M. M., ULUTAN M., ÇELİK O. N.

International Journal of Advances in Mechanical and Civil Engineering , cilt.2, sa.5, ss.1-4, 2015 (Hakemli Dergi)

21. An optimization approach to prevent chatter vibrations

SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., ORAK S., ÇELİK O. N., KUŞHAN M. C.

Int. J. Manag. Appl. Sci. , 2015 (Hakemli Dergi)

22. Flexible Fixturing Systems For Low Production Quantities

SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., ORAK S., ÇELİK O. N., KUŞHAN M. C.

International Journal of Mechanical And Production Engineering, , cilt.3, sa.8, ss.18-20, 2015 (Hakemli Dergi)

23. Tribological behaviours of lubricating oils with CNT and Si3N4 nanoparticle additives

MEHMET NİYAZİ Ç., ÇELİK O. N., SERT A.

Archives of Materials Science and Engineering , cilt.67, sa.2, ss.53-59, 2014 (Scopus)

24. Wear behavior of SiC-reinforced surface composite A17075-T651 aluminum alloy produced using friction stir processing

SERT A., ÇELİK O. N.

INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES , cilt.21, sa.1, ss.35-43, 2014 (SCI-Expanded, Scopus)

25. Wear Characteristics of Traditional Manganese Phosphate and Composite hBN Coatings

AY N., ÇELİK O. N., GÖNCÜ Y.

TRIBOLOGY TRANSACTIONS , cilt.56, sa.6, ss.1109-1118, 2013 (SCI-Expanded, Scopus)

26. Effect of Nano Hexagonal Boron Nitride Lubricant Additives on the Friction and Wear Properties of AISI 4140 Steel

ÇELİK O. N., Ay N., GÖNCÜ Y.

PARTICULATE SCIENCE AND TECHNOLOGY , cilt.31, sa.5, ss.501-506, 2013 (SCI-Expanded, Scopus)

27. Microstructure and wear properties of WC particle reinforced composite coating on Ti6Al4V alloy produced by the plasma transferred arc method

ÇELİK O. N.

APPLIED SURFACE SCIENCE , cilt.274, ss.334-340, 2013 (SCI-Expanded, Scopus)

28. Microstructural and Wear Characteristics of High Velocity Oxygen Fuel (HVOF) Sprayed NiCrBSi-SiC Composite Coating on SAE 1030 Steel

BUYTOZ S., ULUTAN M., ISLAK S., Kurt B., ÇELİK O. N.

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.38, sa.6, ss.1481-1491, 2013 (SCI-Expanded, Scopus)

29. Particle Size Distribution and Shape Characterization of the Chips Produced During Granite Machining in Relation to Process Forces and Specific Energy

YILMAZ N., Goktan R. M., GAŞAN H., ÇELİK O. N.

PARTICULATE SCIENCE AND TECHNOLOGY , cilt.31, sa.3, ss.277-286, 2013 (SCI-Expanded, Scopus)

30. Inspection of friction and wear properties of railway rails

Ay G. M., Çelik O. N.

ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH , cilt.16, sa.2, ss.89-95, 2013 (SCI-Expanded, Scopus)

31. Effect of V, Nb, Ti and graphite additions on the hydrogen desorption temperature of magnesium hydride

GAŞAN H., ÇELİK O. N., Aydinbeyli N., Yaman Y. M.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.37, sa.2, ss.1912-1918, 2012 (SCI-Expanded, Scopus)

32. Effects of graphite content on the microstructure and wear properties of an AISI 8620 steel surface modified by tungsten inert gas (TIC)

ÇELİK O. N., ULUTAN M., GAŞAN H., ER Ü., BUYTOZ S.

SURFACE & COATINGS TECHNOLOGY , cilt.206, sa.6, ss.1423-1429, 2011 (SCI-Expanded, Scopus)

33. Microstructure and Wear Behavior of TIG Surface-Alloyed AISI 4140 Steel

ULUTAN M., YILDIRIM M. M., BUYTOZ S., ÇELİK O. N.

TRIBOLOGY TRANSACTIONS , cilt.54, sa.1, ss.67-79, 2011 (SCI-Expanded, Scopus)

34. Tribological Properties of Borided AISI 4140 Steel with the Powder Pack-Boriding Method

ULUTAN M., YILDIRIM M. M., ÇELİK O. N., BUYTOZ S.

TRIBOLOGY LETTERS , cilt.38, sa.3, ss.231-239, 2010 (SCI-Expanded, Scopus)

35. Effect of Different Surface Treatment Methods on the Friction and Wear Behavior of AISI 4140 Steel

ULUTAN M., ÇELİK O. N., GAŞAN H., ER Ü.

JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY , cilt.26, sa.3, ss.251-257, 2010 (SCI-Expanded, Scopus)

36. The dependence of the hydrogen desorption temperature of MgH2 on its structural and morphological characteristics

GAŞAN H., Aydinbeyli N., ÇELİK O. N., Yaman Y. M.

JOURNAL OF ALLOYS AND COMPOUNDS , cilt.487, ss.724-729, 2009 (SCI-Expanded, Scopus)

37. Effect of dent geometry on fatigue life of aircraft structural cylinder part

Diltemiz S. F., Uzunonat Y., Kushan M. C., ÇELİK O. N.

ENGINEERING FAILURE ANALYSIS , cilt.16, sa.4, ss.1203-1207, 2009 (SCI-Expanded, Scopus)

38. Boride layer growth kinetics of the borided hypoeutectoid plain carbon steels by the powder-pack method

ÇELİK O. N., Aydinbeyli N., GAŞAN H.

PRAKTISCHE METALLOGRAPHIE-PRACTICAL METALLOGRAPHY , cilt.45, sa.7, ss.334-347, 2008 (SCI-Expanded, Scopus)

39. Borlanmış AISI 1030 çeliğinin abrazif aşınma özellikleri

ÇELİK O. N., AKBAYIR Ö., GAŞAN H., ER Ü., AYDINBEYLİ N.

Eskişehir Osmangazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , cilt.21, sa.1, ss.71-86, 2008 (TRDizin) Sürdürülebilir Kalkınma

40. Effect of the heating rate on crystallization behavior of mechanically alloyed Mg50Ni50 amorphous alloy

Aydinbeyli N., ÇELİK O. N., Gasan H., Aybar K.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.31, sa.15, ss.2266-2273, 2006 (SCI-Expanded, Scopus)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 45

1. The Microstructure and MechanicalProperties of Novel (Co40Cr10Fe30Nb10Ni10)92Al8 Eutectic High Entropy Alloy

ÖZCAN A., GAŞAN H., ÇELİK O. N.

International Conference on Modern research in Engineering, Technology Science, 29 - 31 Mart 2019, (Özet Bildiri)

2. The Phase Stability and Mechanical Properties of (Co40Cr10Fe5Mo5Ni40)82,20Al17,80Eutectic High Entropy Alloy

GAŞAN H., ÖZCAN A., ÇELİK O. N.

International Conference On Modern research in Engineering, Technology and Science, 29 - 31 Mart 2019, (Özet Bildiri)

3. Microstructure and Mechanical Properties(Co40Cr10Fe5Mo5Ni40)82,2Al17,8 Eutectic HighEntropy Alloy

GAŞAN H., ÖZCAN A., ÇELİK O. N.

3rd INTERNATIONAL CONFERENCE ONADVANCES INNATURAL APPLIED SCIENCEICANAS 2018, 9 - 12 Mayıs 2018, (Özet Bildiri)

4. Study of Carbide Evolution During Heat Treatment of AISI D2 Tool Steel

ÇAVUŞOĞLU N., SERT A., ÇELİK O. N., CEYHUN V.

International Conference on Engineering Technologies (ICENTE’17), Konya, Türkiye, 7 - 09 Aralık 2017, ss.129, (Özet Bildiri)

5. Effect of Ti addition on microstructure and Hardness of Al1.5CoCr FeMoNi high entropy alloys

GAŞAN H., LÖKÇÜ E., ÇELİK O. N., Özcan A., ÇELİKYÜREK İ., ULUTAN M.

METAL 2017 26. International conference on Metallurgy and Materials, Brno, Çek Cumhuriyeti, 24 - 26 Mayıs 2017, ss.79, (Özet Bildiri)

6. Effect of Mo Addition on the Microstructure and Mechanical Properties of AlCoCrFeNi Eutectic High Entropy Alloys

ÖZCAN A., GAŞAN H., ÇELİK O. N.

26TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS - METAL 2017, 24 - 26 Mayıs 2017, (Özet Bildiri)

7. Investigation of the Mechanism of Cryogenic Treatment on the Microstructural Changes in Tungsten Carbide Tools

SERT A., ÇELİK O. N., GAŞAN H.

3th International Conference on Engineering and Natural Science - ICENS2017, Budapest, Macaristan, 3 - 07 Mayıs 2017, ss.295, (Özet Bildiri)

8. Cutting Performance of Different Co Content of Tungsten Carbide Cutting Tools for Titanium Alloy Milling

SERT A., ÇELİK O. N.

3th International Conference on Engineering and Natural Science - ICENS2017, Budapest, Macaristan, 3 - 07 Mayıs 2017, ss.124, (Özet Bildiri)

9. An overview of parameters affecting ball-on-disk test

AY G. M., SOFUOĞLU M. A., ÇELİK O. N.

International Congress on Applied Science and Technology (ASTECH’xx2017), 17 - 20 Nisan 2017, (Özet Bildiri)

10. Characterisation of Tribological Properties of Lubricating Oil with Silicon Nitride Nanoparticle Additives

SERT A., SAVACI U., ÇELİK O. N., TURAN S.

The 18th International Metallurgy Materials Congress, İstanbul, Türkiye, 29 Eylül - 01 Ekim 2016, ss.455-458, (Tam Metin Bildiri)

11. A Study of Quantitative Metallography and X Ray Diff raction Methods for Quantifying Carbide Amount in AISI D2 Tool Steel

SERT A., GÜRGEN S., ÇELİK O. N.

IMMC 2016 18th International Metallurgy & Materials Congress, İstanbul, Türkiye, 29 Ekim - 01 Kasım 2016, ss.459-462, (Tam Metin Bildiri)

12. Characterization of Tribological Properties of Lubricating Oil With Silicon Nitride Nanoparticle Additives

SERT A., SAVACI U., ÇELİK O. N., TURAN S.

IMMC 2016 18th International Metallurgy & Materials Congress, İstanbul, Türkiye, 29 Ekim - 01 Kasım 2016, ss.455-458, (Tam Metin Bildiri)

13. An Overview of Plasma Transferred Arc Coating on Metals

AY G. M., ÇELİK O. N.

2nd International Congress on The World of Technology and Advanced Materials, Kırşehir, Türkiye, 28 Eylül - 02 Ekim 2016, (Özet Bildiri)

14. A Review of Minimum Quantity Lubrication for Machining Process

AY G. M., ÇELİK O. N.

WITAM-2016 2ND INTERNATIONAL CONGRESS ON THE WORLD OF TECHNOLOGY AND ADVANCED MATERIALS, Kırşehir, Türkiye, 28 Eylül - 02 Ekim 2016, (Özet Bildiri)

15. Friction and Wear Behavior of Plasma Transferred Arc Coating on AISI 4140 Steel of Boron Carbide and Nickel Powder Mixture

AY G. M., ÇELİK O. N.

ISTEC 2016 International Science and Technology Conference, Viyana, Avusturya, 13 - 15 Temmuz 2016, ss.416-425, (Tam Metin Bildiri)

16. Open Source in Tribology Analyzing and Visualizing Tribology Data with R

AY G. M., ÇELİK O. N.

1 st International Conference on Engineering Technology and Applied Sciences, Afyon, Türkiye, 21 - 22 Nisan 2016, (Tam Metin Bildiri)

17. Effect of Mo Content on Structure and Wear Behavior of AlCoCrFeMoxNi x 0 5 1 0 High Entropy Alloys

GAŞAN H., LÖKÇÜ E., özcan a., ÇELİK O. N., ÇELİKYÜREK İ., ULUTAN M., et al.

25th International Conference on Metallurgy and Materials, Bruno, Çek Cumhuriyeti, 25 - 27 Mayıs 2016

18. Tribological Examination of Hardened Two Types Boron Steel for Railway Applications

ÇAKIR F. H., BOZKURT F., ÇELİK O. N., ER Ü.

IWCEA 2015, 30 Kasım - 01 Aralık 2015, (Tam Metin Bildiri)

19. WEAR BEHAVIOUR OF BORON CARBIDE POWDER REINFORCED COATING ON AISI 4140 PRODUCED BY PLASMA TRANSFERRED ARC

AY G. M., ÇELİK O. N.

International Science and Technology Conference 2015, St. Petersburg, Rusya, 2 - 04 Eylül 2015, ss.965-973, (Tam Metin Bildiri)

20. Wear Behavior of Boron Carbide Powder Reinforced Coating on AISI 4140 Produced by Plasma Transferred Arc

AY G. M., ÇELİK O. N.

International Science and Technology Conference, 2 - 04 Eylül 2015, (Tam Metin Bildiri)

21. ADHESIVE WEAR BEHAVIOR OF TIN AND CRNCOATED DIN115CRV3 STEEL TOOLS AT DIFFERENT LOAD CONDITIONS

ÖTEYAKA M. Ö., YILDIRIM M. M., ULUTAN M., ÇELİK O. N.

Proceedings of 8th ISERD International Conference, İstanbul, Türkiye, 9 - 11 Ağustos 2015, ss.69-72, (Tam Metin Bildiri)

22. Adhesive Wear Behavior of TiN and CrN Coaated DIN 115 CrV 3 Steel Tools at Different Load Conditions

ÖTEYAKA M. Ö., YILDIRIM M. M., ULUTAN M., ÇELİK O. N.

International Conference on Chemical and Biochemical Engineering, 09 Ağustos 2015, (Tam Metin Bildiri)

23. An Optimization Approach to Prevent Chatter Vibrations

Sofuoğlu M. A., Çakır F. H., Gürgen S., Orak S., Çelik O. N., Kuşhan M. C.

27th The IIER International Conference, Samara, Rusya, 05 Haziran 2015, ss.37-39, (Tam Metin Bildiri)

24. An optimization approach to prevent chatter vibrations

SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., ORAK S., ÇELİK O. N., KUŞHAN M. C.

27 th TheIIER International Conference, St. Petersburg, Rusya, 05 Haziran 2015, (Tam Metin Bildiri)

25. Flexible fixturing system for low production quantities

Çakır F. H., Gürgen S., Sofuoğlu M. A., Çelik O. N., Kuşhan M. C., Orak S.

Proceeding of 27th The IIER International Conference, Sankt-Peterburg, Rusya, 05 Haziran 2015, ss.56-58, (Tam Metin Bildiri)

26. Flexible fixturing systems for low production quantities

ÇAKIR F. H., GÜRGEN S., SOFUOĞLU M. A., ÇELİK O. N., KUŞHAN M. C., ORAK S.

27 th TheIIER International Conference, St. Petersburg, Rusya, 05 Haziran 2015, (Tam Metin Bildiri)

27. An optimization approach to prevent chatter vibration

Sofuoğlu M. A., Çakır F. H., Gürgen S., Orak S., Çelik O. N., Kuşhan M. C.

Proceeding of 27th The IIER International Conference, Sankt-Peterburg, Rusya, 05 Haziran 2015, ss.37-39, (Tam Metin Bildiri)

28. AN OPTIMIZATION APPROACH TO PREVENT CHATTER

SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., ORAK S., ÇELİK O. N., KUŞHAN M. C.

Proceedings of 27th The IIER International Conference, St. Petersburg, Russia, 5 - 07 Haziran 2015, (Tam Metin Bildiri)

29. Finite element modelling of ultrasonic assisted turning of Ti6Al4V alloy

ÇAKIR F. H., ÇELİK O. N., KUŞHAN M. C., GÜRGEN S., SOFUOĞLU M. A.

WORLD CONFERENCE ON TECHNOLOGY, INNOVATION AND ENTREPRENEURSHIP (WCTIE 2015), İstanbul, Türkiye, 28 - 30 Mayıs 2015, (Özet Bildiri)

30. Structural Improvement of Train Rail with Different Heat Treatment

ÇAKIR F. H., ÇELİK O. N.

ISTANBUL UNIVERSITY WORLD CONFERENCE ON TECHNOLOGY, INNOVATION AND ENTREPRENEURSHIP “ENTREPRENEURSHIP FOR TECHNOLOGY AND INNOVATION - BASED SUSTAINABLE DEVELOPMENT”, 28 - 30 Mayıs 2015, (Özet Bildiri)

31. Finite Element Modelling of Ultrasonic Assisted Turning of Ti6Al4 Alloy

Çakır F. H., Çelik O. N., Kuşhan M. C., Gürgen S., Sofuoğlu M. A.

ISTANBUL UNIVERSITY WORLD CONFERENCE ON TECHNOLOGY, INNOVATION AND ENTREPRENEURSHIP “ENTREPRENEURSHIP FOR TECHNOLOGY AND INNOVATION - BASED SUSTAINABLE DEVELOPMENT”, İstanbul, Türkiye, 28 - 30 Mayıs 2015, (Özet Bildiri)