Assoc. Prof. FATİH HAYATİ ÇAKIR

Publication Network

Articles 48

1. Performance enhancement of Brass EDM electrodes with Cryogenic Treatment while machining the cold work steel AISI D2

Çakır F. H., Ceritbinmez F.

SURFACE REVIEW AND LETTERS , vol.33, no.01, pp.1-23, 2026 (SCI-Expanded, Scopus)

2. Airflow performance of Ti6Al4V holes with varying surface characteristics induced by different machining methods

Ceritbinmez F., Çakır F. H., Yapıcı A.

AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY , vol.97, no.12, pp.1-11, 2025 (SCI-Expanded, Scopus)

3. Sustainable machining: performance evaluation of vegetable-based cutting fluids in drilling

Özden Gürcan G., Mata-Cabrera F., Cakir F. H., Garcia-Plaza E., Nuñez-Lopez P. J.

SADHANA - ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES , vol.50, no.4, pp.1-20, 2025 (SCI-Expanded, Scopus)

4. Investigating the potential of austempering for cold work steels: a comparative study on DIN 1.2379 tool steel

Çakır F. H., Ceritbinmez F.

SADHANA - ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES , vol.50, pp.1-8, 2025 (SCI-Expanded, Scopus)

5. Investigation of fast hole drilling EDM enhancement of brass EDM electrodes with cryogenic treatment while machining the cold work steel DIN 1.2379

Baysal Ş., Çakır F. H., Ceritbinmez F., Kanca E.

CANADIAN METALLURGICAL QUARTERLY , pp.1-13, 2025 (SCI-Expanded, Scopus)

6. Enhancing wear resistance of TiN-coated 1.3343 high-speed steel punches through deep cryogenic treatment and tempering

Çakır F. H.

JOURNAL OF CENTRAL SOUTH UNIVERSITY , vol.32, no.2, pp.350-362, 2025 (SCI-Expanded, Scopus)

7. Evaluation of electromechanical impedance, modal and X-ray testing as non-destructive methods for additively manufactured plastics

Çakır F. H., Er Ü., Tekkalmaz M., Sofuoğlu M. A.

NONDESTRUCTIVE TESTING AND EVALUATION , vol.0, pp.1-26, 2025 (SCI-Expanded, Scopus)

8. MICROSTRUCTURAL AND TRIBOLOGICAL PROPERTIES OF NICKEL-BASED HARDFACING COATINGS APPLIED ON NITRIDING STEELS BY PLASMA TRANSFERRED ARC WELDING

AY G. M., ÇAKIR F. H., SERT A.

Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online) , vol.33, no.2, pp.1809-1818, 2025 (TRDizin)

9. Evaluation of the performance of DLC Coatings (ta-C) of WC-Co tools while machining Al7075 alloy

Çakir F. H., Yilmaz A., Sert Z.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART C: JOURNAL OF MECHANICAL ENGINEERING SCIENCE , vol.1, no.1, pp.1-13, 2024 (SCI-Expanded, Scopus)

10. An experimental study of the friction stir welding of Al 5083 H321 plates by using different process parameters

Aybar K., Çakir F. H.

Canadian Metallurgical Quarterly , vol.63, no.2, pp.360-372, 2024 (SCI-Expanded, Scopus)

11. Monitoring the wear of turning tools with the electromechanical impedance technique

ÇAKIR F. H., ER Ü., TEKKALMAZ M.

JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES , vol.34, no.11, pp.1341-1352, 2023 (SCI-Expanded, Scopus)

12. Surface roughness classification of electro discharge machined surfaces with deep ensemble learning

ANAGÜN Y., IŞIK Ş., Hayati Çakir F. H.

Measurement: Journal of the International Measurement Confederation , vol.215, 2023 (SCI-Expanded, Scopus)

13. Corrosion behavior of graphene coated Ti-6Al-4 V alloy by anodic plasma coating method

PAT S., ÇAKIR F. H., ÖTEYAKA M. Ö.

INORGANIC CHEMISTRY COMMUNICATIONS , vol.147, 2023 (SCI-Expanded, Scopus)

14. Effect of infill pattern and ratio on the flexural and vibration damping characteristics of FDM printed PLA specimens

Öteyaka M. Ö., Çakir F. H., Sofuoğlu M. A.

Materials Today Communications , vol.33, 2022 (SCI-Expanded, Scopus)

15. The Effect of Cryogenic Treatment on Hardness, Toughness, and Tribological Properties of Austempered Ductile Iron with Different Nickel Contents

ÇAKIR F. H.

INTERNATIONAL JOURNAL OF METALCASTING , vol.16, no.3, pp.1442-1454, 2022 (SCI-Expanded, Scopus)

16. Improving machining stability of AISI-4140 with magnetic field

Sofuoglu M. A., Çakir F. H.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , vol.236, no.11, pp.6095-6102, 2022 (SCI-Expanded, Scopus)

17. Enhancing the adhesive bonding strength of Ti6Al4V sheets with fiber laser texturing

Çakır F. H.

International Journal of Adhesion and Adhesives , vol.114, 2022 (SCI-Expanded, Scopus)

18. A new approach to monitor wear tracks propagation on-site with electromechanical impedance technique

Tekkalmaz M., Er Ü., Çakır F. H., Bozkurt F.

Journal of Intelligent Material Systems and Structures , vol.33, no.2, pp.342-351, 2022 (SCI-Expanded, Scopus)

19. Improvement of tool life of a commercial drill bits by cryogenic treatment while machining widmanstatten Ti-6Al-4V

SERT A., ÇAKIR F. H.

SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES , vol.9, no.4, 2021 (SCI-Expanded, Scopus)

20. A new approach to monitoring the operational success of shot peening with electromechanical impedance technique

TEKKALMAZ M., ER Ü., ÇAKIR F. H., Bozkurt F.

International Journal of Advanced Manufacturing Technology , vol.117, pp.3503-3513, 2021 (SCI-Expanded, Scopus)

21. Improvement of the Machinability of Ti–6Al–4V Alloy Wire Electro Discharge Machining with Cryogenic Treatment

ÇAKIR F. H., ÇELİK O. N.

Metals and Materials International , vol.27, no.9, pp.3529-3537, 2021 (SCI-Expanded, Scopus)

22. Wear and corrosion characterisation of AISI 1030, AISI 1040 and AISI 1050 steel coated with Shielded Metal Arc Welding (SMAW) and Plasma Transfer Arc (PTA) methods

ÖTEYAKA M. Ö., Arslan A. E., ÇAKIR F. H.

Sadhana - Academy Proceedings in Engineering Sciences , vol.46, no.3, 2021 (SCI-Expanded, Scopus)

23. Enhancing wear resistance of AISI 304 alloy with shot peening and investigation of corrosion behaviour in marine water

ÇAKIR F. H., ÖTEYAKA M. Ö., ER Ü., Bozkurt F.

Transactions of the Institute of Metal Finishing , vol.99, pp.194-202, 2021 (SCI-Expanded, Scopus)

24. An experimental design of spot welding of Ti6Al4V sheets and numerical modeling approach

Bozkurt F., ÇAKIR F. H.

WELDING IN THE WORLD , vol.65, no.5, pp.885-898, 2021 (SCI-Expanded, Scopus)

25. Influence of Steel Fiber Addition on the Vibrational Characteristic of High Strength Cementitious Composites

Sofuoğlu M. A., Çakır F. H., Celikten S.

Arabian Journal for Science and Engineering , vol.46, no.5, pp.4677-4685, 2021 (SCI-Expanded, Scopus) Sustainable Development

26. Investigation of the Tribological and Mechanical Properties of Boron Steels in Terms of Potential Usage in Agricultural Applications

BOZKURT F., ÇAKIR F. H., ER Ü.

Journal of Polytechnic , vol.24, no.6, pp.431-438, 2021 (ESCI, TRDizin)

27. The Effect of Welding Parameters on Static and Dynamic Behaviors of Spot Welded Ti6Al4V Sheets

Bozkurt F., ÇAKIR F. H., Schmidova E., Sunil Kumar M. R.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , vol.29, no.11, pp.7468-7479, 2020 (SCI-Expanded, Scopus)

28. Influence of Cryogenic Treatment on Microstructure and Mechanical Properties of Ti6Al4V Alloy

Çakır F. H., Çelik O. N.

JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , vol.29, no.10, pp.6974-6984, 2020 (SCI-Expanded, Scopus)

29. Influence of shallow and deep cryogenic treatment on the corrosion behavior of Ti6Al4V alloy in isotonic solution

ÖTEYAKA M. Ö., ÇAKIR F. H., ÇELİK O. N.

MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION , vol.71, no.7, pp.1206-1215, 2020 (SCI-Expanded, Scopus)

30. Tribological Properties of Cryo-Treated and Aged Ti6Al4V Alloy

Çakır F. H., Çelik O. N.

TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS , vol.73, no.3, pp.799-809, 2020 (SCI-Expanded, Scopus)

31. Multi-criteria decision-making analysis of different non-traditional machining operations of Ti6Al4V

GÜRGEN S., ÇAKIR F. H., SOFUOĞLU M. A., ORAK S., KUŞHAN M. C., Li H.

SOFT COMPUTING , vol.23, no.13, pp.5259-5272, 2019 (SCI-Expanded, Scopus)

32. An efficient approach by adjusting bounds for heuristic optimization algorithms

SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S.

SOFT COMPUTING , vol.23, no.13, pp.5199-5212, 2019 (SCI-Expanded, Scopus)

33. Optimization of different non-traditional turning processes using soft computing methods

SOFUOĞLU M. A., ÇAKIR F. H., KUŞHAN M. C., ORAK S.

SOFT COMPUTING , vol.23, no.13, pp.5213-5231, 2019 (SCI-Expanded, Scopus)

34. Design and Economic Analysis of a Novel Hot Ultrasonic Machining System

SOFUOĞLU M. A., GÜRGEN S., ÇAKIR F. H., ORAK S., KUŞHAN M. C.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , vol.22, no.2, pp.277-282, 2019 (ESCI, TRDizin)

35. Yeni sıcak ultrasonik yardımlı imalat ünitesi tasarımı ve ekonomik analizi

SOFUOĞLU M. A., GÜRGEN S., ÇAKIR F. H., ORAK S., KUŞHAN M. C.

Journal of Polytechnic , 2019 (TRDizin)

36. Machining of Hastelloy-X based on finite element modelling

Çakır F. H., Sofuoğlu M. A., Gürgen S.

Advanced Engineering Forum , vol.30, 2018 (Peer-Reviewed Journal)

37. Urban Light Rail Transportation Systems Catenary Line Anti-Icing Applications, Laboratory and Field Tests

ER Ü., ÇAKIR F. H.

Anadolu University Journal of Science and Technology-A Applied Sciences and Engineering , vol.19, no.2, pp.433-442, 2018 (TRDizin)

38. Maintenance Error Detection Procedure and A Case Study of Failure Analysis Locomotive Diesel Engine Bearings

ÇAKIR F. H., SERT A., ÇELİK O. N., Dereoglu N.

JOURNAL OF FAILURE ANALYSIS AND PREVENTION , vol.18, no.2, pp.356-363, 2018 (ESCI, Scopus)

39. Experimental investigation of machining characteristics and chatter stability for Hastelloy-X with ultrasonic and hot turning

SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., ORAK S., KUŞHAN M. C.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , vol.95, pp.83-97, 2018 (SCI-Expanded, Scopus)

40. Numerical investigation of hot ultrasonic assisted turning of aviation alloys

SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., ORAK S., KUŞHAN M. C.

Journal of the Brazilian Society of Mechanical Sciences and Engineering , vol.40, no.3, 2018 (SCI-Expanded, Scopus)

41. A New Approach To Chip Breaking Application In Turning Operation Using Variable Feed Rates

ÇAKIR F. H., ÇELİK O. N.

Cumhuriyet Science Journal , vol.38, no.4, pp.188-196, 2017 (TRDizin)

42. Effect of Isothermal Bainitic Quenching on Rail Steel Impact Strength and Wear Resistance

ÇAKIR F. H., ÇELİK O. N.

METAL SCIENCE AND HEAT TREATMENT , vol.59, pp.289-293, 2017 (SCI-Expanded, Scopus)

43. The effects of cryogenic treatment on the toughness and tribological behaviors of eutectoid steel

ÇAKIR F. H., ÇELİK O. N.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , vol.31, no.7, pp.3233-3239, 2017 (SCI-Expanded, Scopus)

44. Enerji Verimliliği İçin Tren Direnci Formüllerinin Karşılaştırılması

AKBAYIR Ö., ÇAKIR F. H.

Mehmet Akif Ersoy Üniversitesi Fen Bilimleri Enstitüsü Dergisi , vol.8, no.1, pp.112-126, 2017 (Peer-Reviewed Journal) Sustainable Development

45. Metrobüs Sisteminin Enerji Kullanımı ve Çevreye Etkilerinin İncelenmesi, Elektrikli Araçlar ve Trolleybüslerin Kullanım Potansiyellerinin Araştırılması

ÇAKIR F. H., AKBAYIR Ö.

Mehmet Akif Ersoy Üniversitesi Fen Bilimleri Enstitüsü Dergisi , vol.8, pp.97-102, 2017 (Peer-Reviewed Journal)

46. Finite Element Modeling of Ultrasonic Assisted Turning of Ti6Al4V Alloy

Çakır F. H., Gürgen S., Sofuoğlu M. A., Çelik O. N., Kuşhan M. C.

Finite Element Modeling of Ultrasonic Assisted Turning of Ti6Al4V Alloy , no.195, pp.2839-2848, 2015 (Peer-Reviewed Journal)

47. Multi Response Optimization Of Turning Operation With Self-Propelled Rotary Tool

Gürgen S., Çakır F. H., Sofuoğlu M. A., Orak S., Kuşhan M. C.

Procedia - Social and Behavioral Sciences , no.195, pp.2576-2585, 2015 (Peer-Reviewed Journal)

48. Operational Improvements in The Assembly Process of Lead Cable Using New Methods

Sofuoğlu M. A., Çakır F. H., Gürgen S., Kuşhan M. C.

Procedia - Social and Behavioral Sciences , no.195, pp.2576-2585, 2015 (Peer-Reviewed Journal)

Papers Presented at Peer-Reviewed Scientific Conferences 21

1. Platform Screen Doors in Urban Rail Systems: Design, Implementation, and Benefits

ÇAKIR F. H.

TMMOB Elektrik Mühendisleri Odası, İnşaat Mühendisleri Odası, Makina Mühendisleri Odası 2. Raylı Sistemler Kongre ve Sergisi, Eskişehir, Turkey, 6 - 08 November 2025, pp.1-4, (Full Text)