Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Tribological behavior of UHMWPE matrix composites reinforced with PTFE particles and aramid fibers

GÜRGEN S., ÇELİK O. N., KUŞHAN M. C.
COMPOSITES PART B-ENGINEERING , cilt.173, 2019 (SCI-Expanded) identifier identifier

Fatigue and corrosion behavior of in-service AA7075 aircraft component after thermo-mechanical and retrogression and re-aging treatments

GÜRGEN S., Sackesen I., KUŞHAN M. C.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS , cilt.233, sa.9, ss.1764-1772, 2019 (SCI-Expanded) identifier identifier

Multi-criteria decision-making analysis of different non-traditional machining operations of Ti6Al4V

GÜRGEN S., ÇAKIR F. H., SOFUOĞLU M. A., ORAK S., KUŞHAN M. C., Li H.
SOFT COMPUTING , cilt.23, sa.13, ss.5259-5272, 2019 (SCI-Expanded) identifier identifier

Optimization of different non-traditional turning processes using soft computing methods

SOFUOĞLU M. A., ÇAKIR F. H., KUŞHAN M. C., ORAK S.
SOFT COMPUTING , cilt.23, sa.13, ss.5213-5231, 2019 (SCI-Expanded) identifier identifier

Rheological compatibility of multi-phase shear thickening fluid with a phenomenological model

GÜRGEN S., SOFUOĞLU M. A., KUŞHAN M. C.
SMART MATERIALS AND STRUCTURES , cilt.28, sa.3, 2019 (SCI-Expanded) identifier identifier

Surface topography of nickel-based superalloy manufactured with direct metal laser sintering (DMLS) method

Solakoglu E. U., GÜRGEN S., KUŞHAN M. C.
SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES , cilt.7, sa.1, 2019 (SCI-Expanded) identifier identifier

Residual Stress-induced Distortions in Laser Powder Bed Additive Manufacturing of Nickel-based Superalloys

Poyraz O., KUŞHAN M. C.
STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING , cilt.65, sa.6, ss.343-350, 2019 (SCI-Expanded) Creative Commons License identifier identifier

Experimental investigation of machining characteristics and chatter stability for Hastelloy-X with ultrasonic and hot turning

SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., ORAK S., KUŞHAN M. C.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.95, ss.83-97, 2018 (SCI-Expanded) identifier identifier

Numerical investigation of hot ultrasonic assisted turning of aviation alloys

SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., ORAK S., KUŞHAN M. C.
Journal of the Brazilian Society of Mechanical Sciences and Engineering , cilt.40, sa.3, 2018 (SCI-Expanded) Creative Commons License identifier identifier

Investigation of the effect of different process parameters for laser additive manufacturing of metals

Poyraz O., KUŞHAN M. C.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.33, sa.2, ss.699-711, 2018 (SCI-Expanded) identifier identifier

Shear thickening fluids in protective applications: A review

GÜRGEN S., KUŞHAN M. C., Li W.
PROGRESS IN POLYMER SCIENCE , cilt.75, ss.48-72, 2017 (SCI-Expanded) Creative Commons License identifier identifier

The ballistic performance of aramid based fabrics impregnated with multi-phase shear thickening fluids

GÜRGEN S., KUŞHAN M. C.
POLYMER TESTING , cilt.64, ss.296-306, 2017 (SCI-Expanded) identifier identifier

Effect of heat treatment on the bending behavior of aluminum alloy tubes

SERT A., GÜRGEN S., ÇELİK O. N., KUŞHAN M. C.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , cilt.31, sa.11, ss.5273-5278, 2017 (SCI-Expanded) identifier identifier

The stab resistance of fabrics impregnated with shear thickening fluids including various particle size of additives

GÜRGEN S., KUŞHAN M. C.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING , cilt.94, ss.50-60, 2017 (SCI-Expanded) identifier identifier

Oxidation and thermal shock behavior of thermal barrier coated 18/10CrNi alloy with coating modifications

GÜRGEN S., Diltemiz S. F., KUŞHAN M. C.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , cilt.31, sa.1, ss.149-155, 2017 (SCI-Expanded) identifier identifier

The effect of silicon carbide additives on the stab resistance of shear thickening fluid treated fabrics

GÜRGEN S., KUŞHAN M. C.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , cilt.24, sa.16, ss.1381-1390, 2017 (SCI-Expanded) identifier identifier

The rheology of shear thickening fluids with various ceramic particle additives

GÜRGEN S., Li W., KUŞHAN M. C.
MATERIALS & DESIGN , cilt.104, ss.312-319, 2016 (SCI-Expanded) Creative Commons License identifier identifier

The effect of carbide particle additives on rheology of shear thickening fluids

GÜRGEN S., KUŞHAN M. C., Li W.
KOREA-AUSTRALIA RHEOLOGY JOURNAL , cilt.28, sa.2, ss.121-128, 2016 (SCI-Expanded) identifier identifier

Electron beam welding varestraint test of ALLVAC 718 Plus™ for aviation technology

Uzgur S., Li H., Cemal Kushan M. C., Yan M., Uzunonat Y., Diltemiz F.
Advanced Science Letters , cilt.13, ss.831-832, 2012 (SCI-Expanded) identifier

Effect of dent geometry on fatigue life of aircraft structural cylinder part

Diltemiz S. F., Uzunonat Y., Kushan M. C., ÇELİK O. N.
ENGINEERING FAILURE ANALYSIS , cilt.16, sa.4, ss.1203-1207, 2009 (SCI-Expanded) identifier identifier

Failure analysis of an aircraft propeller

Kushan M. C., Diltemiz S. F., Sackesen I.
ENGINEERING FAILURE ANALYSIS , cilt.14, sa.8, ss.1693-1700, 2007 (SCI-Expanded) identifier identifier

Hot cracking susceptibilities in the heat-affected zone of electron beam-welded inconel 718

Yaman Y., Kushan M. C.
JOURNAL OF MATERIALS SCIENCE LETTERS , cilt.17, sa.14, ss.1231-1234, 1998 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

UÇMAYA DEVAM EDİYOR ŞANLI DAKOTA

Kuşhan M. C.
Makina , sa.163, ss.12-13, 2020 (Hakemsiz Dergi)

Experimental investigation of newly designed cutting tool inserts in turning

SOFUOĞLU M. A., GÜRGEN S., KUŞHAN M. C.
Journal of Production Systems and Manufacturing Science , 2020 (Hakemli Dergi)

COVID-19 UN DÜNYA SİVİL HAVACILIĞINA ETKİSİ

Kuşhan M. C.
MAKİNA , sa.162, ss.10-13, 2020 (Hakemsiz Dergi) Sürdürülebilir Kalkınma

Yeni Nesil Uçak Motorları ve Uçaklar

Arslanoğlu B., Kuşhan M. C.
Makina , sa.160, ss.10-13, 2020 (Hakemsiz Dergi)

Finite element modelling of the hot ultrasonic assisted turning of titanium alloy in terms of different vibrational parameters

KUŞHAN M. C., ORAK S., SOFUOĞLU M. A.
International Journal of Mechanical and Production Engineering (ICSTEM 2019 konferansından) , 2019 (Hakemli Dergi)

Comparison of different FEM software in terms of hot ultrasonic assisted machining technique

SOFUOĞLU M. A., KUŞHAN M. C., ORAK S.
Materials Science Forum (ICMDA 2019 konferansından) , 2019 (Scopus)

Da Vincvi’den Sikorsky’e

KUŞHAN M. C.
Makina , sa.152, ss.21-22, 2019 (Hakemsiz Dergi)

Unpowered Flight Principle: Sailplane

keskin g., DURMUŞ S., KARAKAYA M., teoman A., KUŞHAN M. C.
Engineer and Machinery , cilt.60, sa.695, ss.165-177, 2019 (Hakemli Dergi)

Design and Economic Analysis of a Novel Hot Ultrasonic Machining System

SOFUOĞLU M. A., GÜRGEN S., ÇAKIR F. H., ORAK S., KUŞHAN M. C.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.22, sa.2, ss.277-282, 2019 (ESCI) Creative Commons License identifier

ÇOK KULLANIMLI 1500M. İRTİFALI ROKET TASARIMI

Arslanoğlu B., Şahin E., Güzel H. M., KUŞHAN M. C.
Makina , sa.155, ss.20-21, 2019 (Hakemsiz Dergi)

Yeni Nesil Uçak Kanatları

Arslanoğlu B., Şahin E., KUŞHAN M. C.
Makina , cilt.17, sa.156, ss.15-16, 2019 (Hakemsiz Dergi)

Numerical Investigation of Hot Ultrasonic Assisted Turning of Titanium Alloy

Çakır F. H., Gürgen S., Sofuoğlu M. A., Kuşhan M. C., Orak S.
European Journal of Engineering and Natural Sciences , cilt.3, sa.2, ss.147-151, 2019 (Hakemli Dergi) Creative Commons License

Berkan ARSLANOĞLU, Emre ŞAHİN, Melih Cemal Kuşhan, Yeni Nesil Uçak Kanatları, Makina, 17-18, 156, 2019

Arslanoğlu B., Şahin E., Kuşhan M. C.
Makina , cilt.17, sa.156, ss.15-16, 2019 (Hakemsiz Dergi)

An Investigation on Surface Roughness and Tool Wear in Turning Operation of Inconel 718

GÜRGEN S., Tali D., KUŞHAN M. C.
JOURNAL OF AEROSPACE TECHNOLOGY AND MANAGEMENT , cilt.11, 2019 (ESCI) Creative Commons License identifier identifier

Havacılıkta MRO ve Endüstri 4.0

KUŞHAN M. C.
Makina , sa.153, ss.17-18, 2019 (Hakemsiz Dergi)

SYSTEMATICAL REVIEW ON THE NUMERICAL SIMULATIONS OF LASER POWDER BED ADDITIVE MANUFACTURING

KUŞHAN M. C., Poyraz O., UZUNONAT Y., ORAK S.
SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI , cilt.36, sa.4, ss.1195-1212, 2018 (ESCI) Sürdürülebilir Kalkınma identifier

Composite Structures of C919

GÜRGEN S., SOFUOĞLU M. A., ÇAKIR F. H., KUŞHAN M. C.
Elixir , cilt.122, sa.1, ss.51767-51770, 2018 (Hakemli Dergi)

Numerical investigation of machining characteristics of Hastelloy-X

SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., ORAK S., KUŞHAN M. C.
The Online Journal of Science and Technology , cilt.8, sa.4, ss.72-76, 2018 (Hakemli Dergi)

JET MOTORLARINDA UYGULANAN EFÜZYON FİLM SOĞUTMA AKIŞ KARAKTERİSTİKLERİNİN PIV YÖNTEMİYLE İNCELENMESİ

Yalçın S. E., Yakın E. Y., Karakoç T. H., Kuşhan M. C.
Sürdürülebilir Havacılık Araştırmaları Dergisi , cilt.3, sa.2, ss.55-62, 2018 (Hakemli Dergi)

An experimental investigation of the ultrasonic-assisted machining of Ti-6Al-4V

ÇAKIR F. H., GÜRGEN S., ORAK S., KUŞHAN M. C., SOFUOĞLU M. A.
Makina Tasarımı ve İmalat Dergisi (UMTIK 2018 konferansından) , 2018 (Hakemli Dergi)

The Use of Additive Manufacturing Technologies in Maintenance Applications of Aviation Components

Poyraz Ö., KUŞHAN M. C.
Engineer and Machinery , cilt.59, sa.691, ss.59-69, 2018 (Hakemli Dergi)

Ultrasonic Assisted Machining Methods: A Review

KUŞHAN M. C., ORAK S., UZUNONAT Y.
International Journal of Advanced Engineering Research and Applications (IJA-ERA) , cilt.3, sa.5, 2017 (Hakemli Dergi)

TURNING OPERATION OF NICKEL BASED SUPERALLOY RENE 41

Tali D., GAŞAN H., GÜLEŞEN M., GÜRGEN S., KUŞHAN M. C.
International Journal of Mechanical and Production Engineering , cilt.5, sa.5, 2017 (Hakemli Dergi)

A new superalloy:ALLVAC 718 TM

SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., KUŞHAN M. C.
International Journal of Mechanical And Production Engineering , cilt.5, sa.3, ss.125-128, 2017 (Hakemli Dergi)

Descrıptıon Of Modıfıcatıon Wıth New Armor Protectıon Plates For Helicopters

GÜRGEN S., Akın Ş. K., KUŞHAN M. C.
Journal of Advanced Research in Engineering Technology , cilt.1, sa.2, ss.1-4, 2017 (Hakemli Dergi)

A new supperalloy: ALLVAC 718 PLUSTM

SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., KUŞHAN M. C.
International Journal of Mechanical And Production Engineering (ICSTEM 2017 konferansından) , 2017 (Hakemli Dergi)

Nikel Esaslı Süperalaşım Rene 41’xxin Tornalama İşlemi

tali d., GAŞAN H., GÜLEŞEN M., GÜRGEN S., KUŞHAN M. C.
TEI Post , 2017 (Hakemsiz Dergi)

A NEW SUPERALLOY “ALLVAC 718 PLUSTM

SOFUOĞLU M. A., GÜRGEN S., ÇAKIR F. H., KUŞHAN M. C.
International Journal of Mechanical And Production Engineering , 2017 (Hakemli Dergi)

Rheological Properties of Shear Thickening Fluids

GÜRGEN S., KUŞHAN M. C.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.19, sa.4, ss.409-414, 2016 (ESCI) identifier identifier

Finite Element Modeling of Ultrasonic Assisted Turning of Ti6Al4V Alloy

Çakır F. H., Gürgen S., Sofuoğlu M. A., Çelik O. N., Kuşhan M. C.
Finite Element Modeling of Ultrasonic Assisted Turning of Ti6Al4V Alloy , sa.195, ss.2839-2848, 2015 (Hakemli Dergi)

Operational Improvements in The Assembly Process of Lead Cable Using New Methods

Sofuoğlu M. A., Çakır F. H., Gürgen S., Kuşhan M. C.
Procedia - Social and Behavioral Sciences , sa.195, ss.2576-2585, 2015 (Hakemli Dergi)

Multi Response Optimization Of Turning Operation With Self-Propelled Rotary Tool

Gürgen S., Çakır F. H., Sofuoğlu M. A., Orak S., Kuşhan M. C.
Procedia - Social and Behavioral Sciences , sa.195, ss.2576-2585, 2015 (Hakemli Dergi)

An optimization approach to prevent chatter vibrations

SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., ORAK S., ÇELİK O. N., KUŞHAN M. C.
Int. J. Manag. Appl. Sci. , 2015 (Hakemli Dergi)

Flexible Fixturing Systems For Low Production Quantities

SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., ORAK S., ÇELİK O. N., KUŞHAN M. C.
International Journal of Mechanical And Production Engineering, , cilt.3, sa.8, ss.18-20, 2015 (Hakemli Dergi)

Wireless Eddy Current Probe Prototype and Monitor Design and Aircraft Maintenance Applications

engin g., kuşhan M. C., ÇEVİK S.
Advanced Materials Research , cilt.905, ss.448-451, 2014 (Scopus) identifier

Wireless Eddy Current Probe Design and Applications in Aircraft Maintenance

Kuşhan M. C., Ünalır T., Göde E., Ekinci H.
International Technology Research Letters , cilt.1, sa.1, ss.18-20, 2012 (Hakemli Dergi) Creative Commons License

Gaz Türbinlerinin Bakımında Sıcak Kısım Parçalarına Uygulanan Sıcak Lehimleme Brazing Tamir İşlemi ve Proses Etkinliğinin Değerlendirilmesi

Uzunonat Y., Çevik S., Kuşhan M. C., Diltemiz S. F.
Mühendis ve Makina , cilt.633, ss.13-15, 2012 (Hakemli Dergi)

Inconel 718 Geliştirildi ALLVAC 718 Plus

UZUNONAT Y., ÇEVİK S., KUŞHAN M. C.
Mühendis ve Makina , cilt.633, ss.13-15, 2012 (Hakemli Dergi)

Inconel 718 Geliştirildi: ALLVAC 718 Plus

Çevik S., Uzunonat Y., Kuşhan M. C.
Mühendis ve Makina , sa.614, ss.36-40, 2011 (Hakemli Dergi)

MoSi2 Composites for High Temperature Structural Applications

Uzunonat Y., Çevik S., Diltemiz S. F., Kuşhan M. C., Ölmez R.
Advanced Materials , sa.214, ss.103-107, 2011 (Hakemli Dergi)

The effect of laser glazing process on microstructure of plasma sprayed thermal barrier coatings

Kuşhan M. C., Diltemiz S. F.
ANADOLU UNIVERSITY JOURNAL OF SCIENCE AND TECHNOLOGY –A , cilt.12, sa.2, ss.105-110, 2011 (Hakemli Dergi) Creative Commons License

Cyclic Oxidation Behaviour of MoSi2 and MoSi2-Si3N4 Composites for Aircraft Gas Turbine Elements

Uzunonat Y., Çevik S., Diltemiz S. F., Kuşhan M. C.
Advanced Materials , sa.214, ss.349-353, 2011 (Hakemli Dergi)

State-of-Art Technology ALLVAC 718 Plus Superalloy for Gas Turbine Engine Parts

Çevik S., Uzunonat Y., Diltemiz S. F., Kuşhan M. C., Günay R.
Advanced Materials , sa.213, ss.131-135, 2011 (Hakemli Dergi)

Avustralyada Makine Mühendisliği Eğitimi

Kuşhan M. C.
Mühendis ve Makina , cilt.621, ss.74-75, 2011 (Hakemli Dergi)

Mikrolightlarda Kullanılan Motor Çeşitlerinin Tanımları

Tali D., Uzundağ M., Kuşhan M. C.
Makina , sa.76, ss.43-45, 2006 (Hakemsiz Dergi)

Her Yönüyle Microlight, Makina

Tali D., Uzundağ M., Kuşhan M. C.
Makina , sa.75, ss.26-27, 2006 (Hakemsiz Dergi)

Şekil Bellekli Alaşımların Uzay ve Havacılık Endüstrisindeki Uygulamaları

KUŞHAN M. C., bektaş h.
Turkish Aviation , cilt.38, ss.18-19, 2002 (Hakemli Dergi)

Uçaklarda Panel Kompozit kullanımı

Kuşhan M. C., Avcı P., Avcı Y.
Turkish Aviation , cilt.40, ss.50-51, 2002 (Hakemli Dergi)

İlk Uçuşlar

Kuşhan M. C.
Turkish Aviation , sa.33, ss.34-35, 2001 (Hakemli Dergi) Creative Commons License

FLA-A400 Projesi ve Türkiye

Kuşhan M. C.
Turkish Aviation , sa.26, ss.21, 1999 (Hakemli Dergi) Creative Commons License

Havacılıktaki Uygulamalarıyla NDT

KUŞHAN M. C., avcı p., avcı y.
Turkish Aviation , cilt.52, sa.26, ss.39, 1999 (Hakemli Dergi)

Emektar C-47

Kuşhan M. C.
Turkish Aviation , sa.14, ss.20-21, 1998 (Hakemli Dergi)

Askeri Hava Gücümüz ve Avrupa

Kuşhan M. C.
Tukish Aviation , sa.45, ss.20-21, 1998 (Hakemli Dergi) Creative Commons License

Hava Gücümüz ve Avrupa

Kuşhan M. C.
Makina , sa.15, ss.24-25, 1996 (Hakemsiz Dergi)

Endüstriyel Robotların Ülkemiz Açısından Ekonomik Olarak Değerlendirilmesi ve Bir Bilgisayar Programı

Kuşhan M. C., Göktaş Y.
Endüstri Mühendisliği , sa.1, ss.186-193, 1989 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Yeşil Havaalanlarının Toplum Sağlığı Üzerindeki Etkileri

PEKER M. Y., DEMİRKAYA G., KUŞHAN M. C.
Havacılık ve Uzay Tıbbı Kongresi (HUTP 2023), Eskişehir, Türkiye, 19 - 22 Ekim 2023

VARESTRAINT WELDABILITY TEST FOR HIGH TECHNOLOGY WELDING OPERATIONS

Çevik S., Kuşhan M. C.
10th INTERNATIONAL CONGRESS ON ENGINEERING AND TECHNOLOGY MANAGEMENT, İstanbul, Türkiye, 14 - 15 Ekim 2023, cilt.1, sa.1, ss.414-421

BAKIMDA NESNELERİN İNTERNETİ VE UÇAK BAKIMDA SANAL GERÇEKLİK/ARTIRILMIŞ GERÇEKLİK UYGULAMALARI

DEĞERLİ M. C., ŞAHİN Ö., YAZAR I., KUŞHAN M. C.
10. Uluslararası Katılımlı Bakım teknolojileri Kongresi ve Sergisi, Denizli, Türkiye, 20 - 22 Ekim 2022

IMPORTANCE OF COMMUNICATION IN AUTOMOTIVE

Bozkurt Y. E., Daz B., Unç S. C., Kuşhan M. C.
6nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’21), Cappadocia /TURKEY, Kayseri, Türkiye, 26 - 28 Kasım 2021, cilt.1, sa.1, ss.20-25

Radar Absorption Capabilities of Polyurethane Sandwich Composite Foams

Kuşhan M. C.
V. International Ege Composite Materials Symposium - KompEge, Antalya, Türkiye, 4 - 06 Kasım 2021, cilt.1, sa.1, ss.10-15

COMPOSITE LIGHTWEIGHT ARMOR DESIGN ATLERNATIVES FOR HELICOPTERS

Kuşhan M. C., Çetin B., Tonbul K., Teoman A., Göde E.
V. International Ege Composite Materials Symposium, Antalya, Türkiye, 4 - 06 Kasım 2021, cilt.1, sa.1, ss.25-29 Sürdürülebilir Kalkınma

ARAMID fabrics used as ballistic plate for army

KUŞHAN M. C., GÜRGEN S., SOFUOĞLU M. A.
8th International Fiber and Polymer Research Symposium, Türkiye, 18 - 19 Haziran 2021

Investigating Production of Polyurethane Elastomer Materials Using Shape Deposition Manufacturing Method

Sheikhi M. R., Gürgen S., Kuşhan M. C.
8. INTERNATIONAL FIBER AND POLYMER RESEARCH SYMPOSIUM,, Eskişehir, Türkiye, 18 - 19 Haziran 2021, cilt.1, sa.1, ss.24-27

Uçak Kompozit Yapılarında Termografik Analiz ile Tahribatsız Muayene

Eroğlu E., Diltemiz S. F., Kuşhan M. C., Gürgen S.
Uçak Kompozit Yapılarında Termografik Analiz ile Tahribatsız Muayene, Eskişehir, Türkiye, 18 - 19 Haziran 2021, cilt.1, sa.1, ss.20-25

Deformation of STF Treated Spall Liners

GÜRGEN S., KUŞHAN M. C.
International Symposium on Aircraft Technology, Eskişehir, Türkiye, 22 - 24 Eylül 2020

Dünyada ve Ülkemizde Sivil Havacılık Bakım Onarım ve Yenileme (BOY) Faaliyetleri

GÜRGEN S., SOFUOĞLU M. A., ÇAKIR F. H., KUŞHAN M. C.
9. Uluslararası Bakım Teknolojileri Kongresi ve Sergisi-BTKS, Denizli, Türkiye, 26 - 28 Eylül 2019, cilt.1, ss.185-191

Low-frequency vibration assisted turning of Inconel-100 material: A simulation study

YILDIZ T., KAYA Y., SOFUOĞLU M. A., KUŞHAN M. C.
ICAME 2019, 17 - 19 Aralık 2019

Structural health monitoring and its applications in manufacturing environment

SOFUOĞLU M. A., ORAK S., KUŞHAN M. C.
ICAME 2019, 17 - 19 Aralık 2019

LOW-FREQUENCY VIBRATION ASSISTED TURNING OF INCONEL-100 MATERIAL: A SIMULATION STUDY, , ISTANBUL 2019

yıldız t., Kaya Y., SOFUOĞLU M. A., KUŞHAN M. C.
5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, 17 - 19 Aralık 2019

A DAMAGE DETECTION OF A STEEL PLATE USING EMI METHOD

SOFUOĞLU M. A., ORAK S., KUŞHAN M. C.
INTERNATIONAL ANKARA CONFERENCE OF SCIENTIFIC RESEARCH, 4 - 06 Ekim 2019

A numerical study of Ti6Al4V machining using different non-traditional turning operations

SOFUOĞLU M. A., ORAK S., KUŞHAN M. C.
ICES 2019, 19 Eylül 2019

Finite element modeling of the hot ultrasonic assisted turning of titanium alloy in terms of different vibrational parameters

KUŞHAN M. C., ORAK S., SOFUOĞLU M. A.
ICSTEM 2019, 15 - 16 Eylül 2019

DESIGN FOR ADDITIVE MANUFACTURING WITH CASE STUDIES ON AIRCRAFTS AND PROPULSION SYSTEMS

Poyraz Ö., Kuşhan M. C.
International Conference of Scientific Paper AFASES 2019, Brasov, Romanya, 31 Mayıs - 02 Haziran 2019, cilt.21, ss.166-175

GLIDER FLIGHT TRAINING APPLICATION IN TURKISH AIR FORCE

keskin g., KAFALI H., DURMUŞ S., GÜRGEN S., KUŞHAN M. C.
International Conference of Scientific Paper AFASES 2019, 31 Mayıs - 02 Haziran 2019

RESEARCH ON APPLICATIONS OF MINI-TURBOJET AND TURBOJET ENGINED MILITARY UAVS

Türkay M., GÜRGEN S., keskin g., DURMUŞ S., KUŞHAN M. C.
International Conference of Scientific Paper AFASES 2019, 31 Mayıs - 02 Haziran 2019

Comparison of different FEM software in terms of hot ultrasonic assisted machining technique

SOFUOĞLU M. A., KUŞHAN M. C., ORAK S.
2nd International Conference on Materials Design and Application (ICMDA 2019), 13 - 15 Nisan 2019 identifier

Composite Structures of SSJ100

KUŞHAN M. C., keskin g.
International Symposium on Aircraft Technology, MRO Operations 2018, İstanbul, Türkiye, 25 - 28 Kasım 2018, cilt.1, ss.50-54

Composite Structures of C919

GÜRGEN S., ÇAKIR F. H., SOFUOĞLU M. A., KUŞHAN M. C.
Conferencefora 8th International Conference, Singapore, Singapur, 26 - 27 Ağustos 2018, cilt.1, ss.1-4

An experimental investigation of the ultrasonic-assisted machining of Ti-6Al-4V

ÇAKIR F. H., GÜRGEN S., ORAK S., KUŞHAN M. C., SOFUOĞLU M. A.
UMTIK 2018, 3 - 06 Temmuz 2018

Ultrasonic assisted machining methods: A review from 1984-2017

SOFUOĞLU M. A., ORAK S., KUŞHAN M. C., AY G. M.
TURKEYTRIB 2018, 18 - 20 Nisan 2018

Investigation the Effects of Ultrasonic Assisted Turning on Surface Properties of Ti6Al4V Alloy

Sofuoğlu M. A., Kuşhan M. C., Orak S., Ay G. M.
TURKEYTRIB'18 - 2nd INTERNATIONAL CONFERENCE ON TRIBOLOGY , İstanbul, Türkiye, 18 - 20 Nisan 2018, ss.208

Seramik Tozu İçeren Nano Süspansiyonların Kumaş Yüksek Hızlı Çarpma Direncine Etkileri

GÜRGEN S., KUŞHAN M. C.
3. Uluslararası Lif ve Polimer Araştırmaları Sempozyumu, Bursa, Türkiye, 8 - 09 Mart 2018, cilt.1, ss.1-6

Failure of Sandwich Structures in Aviation

GÜRGEN S., GÖDE E., KUŞHAN M. C.
International Advanced Researches Engineering Congress, Osmaniye, Türkiye, 16 - 18 Kasım 2017, cilt.1, ss.695-697

Shear strength of AA7075 lap joints after various joining methods

GÜRGEN S., ÇAKIR F. H., SOFUOĞLU M. A., KUŞHAN M. C.
International Advanced Researches Engineering Congress, 16 - 18 Kasım 2017

Unmanned Systems For Navies

ÇAMURDAN B., vural h., GÜRGEN S., KUŞHAN M. C.
Euroasian Multidisciplinary Forum, Tbilisi, Gürcistan, 6 - 07 Ekim 2017, cilt.1, ss.15

Havacılık Komponentlerinin Bakım Uygulamalarında Katmanlı İmalat Teknolojilerinin Kullanımı

Poyraz Ö., KUŞHAN M. C.
VIII: Bakın Teknolojileri Kongre ve Sergisi, Denizli, Türkiye, 28 - 30 Eylül 2017

Numerical investigation of hot ultrasonic assisted turning of titanium alloy

ÇAKIR F. H., GÜRGEN S., SOFUOĞLU M. A., KUŞHAN M. C., ORAK S.
3rd International Conference on Engineering and Natural Sciences (ICENS 2017), 3 - 07 Mayıs 2017

Numerical investigation of machining characteristics of Hastelloy-x

SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., ORAK S., KUŞHAN M. C.
International Science and Technology Conference (ISTEC 2017), 17 - 19 Temmuz 2017

Impact of Industry 4.0 to Aircraft Maintenance, Repair and OverHaul

TAT M. E., KUŞHAN M. C.
VII International Symposium Engineering Management and Competitiveness 2017 (EMC 2017), Zrenjanin, Sırbistan, 16 - 17 Haziran 2017, ss.101-105

TURNING OPERATION OF NICKEL BASED SUPERALLOY RENE 41

tali d., GAŞAN H., GÜLEŞEN M., GÜRGEN S., KUŞHAN M. C.
The IIER International Conference, Prag, Çek Cumhuriyeti, 21 - 22 Mart 2017, cilt.1, ss.1-3

ALLVAC 718 PLUSTM

SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., KUŞHAN M. C.
ISER International Conference, 12th -13th January 2017, Jakarta, Indonesia, Jakarta, Endonezya, 12 - 13 Ocak 2017, cilt.1, ss.1-4

A NEW SUPERALLOY: ALLVAC 718 Plus

SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., KUŞHAN M. C.
I S E RINTERNATIONAL CONFERENCE, Jakarta, Endonezya, 12 - 13 Ocak 2017, cilt.1, ss.1-4

The Position of Turkısh Aır Transportatıon in Europe

Çamurdan B., Çetin S., Gürgen S., Kuşhan M. C.
3rd International Multidisciplinary Scientific Conferences on Social Sciences and Arts, Varna, Bulgaristan, 22 - 31 Ağustos 2016, cilt.5, ss.849-855

Descrıptıon Of Modıfıcatıon Wıth New Armor Protectıon Plates For Helicopters

GÜRGEN S., şeniz kuşhan a., KUŞHAN M. C.
IAARHIES 28th International Conference on Engineering & Technology ICET – 2016, Shanghai, Çin, 18 - 19 Eylül 2016

Description of Modification of Armor Protection for Helicopters

GÜRGEN S., KUŞHAN AKIN S. R., KUŞHAN M. C.
28th IAARHIES International Conferences, Shanghai, Çin, 18 - 19 Eylül 2016, cilt.1, ss.66-69

Examınatıon Of The European Countrıes Uav Fleets

Kuşhan M. C.
3rd International Multidisciplinary Scientific Conferences on Social Sciences and Arts, Varna, Bulgaristan, 22 - 31 Ağustos 2016, cilt.2, ss.143-150

High Performance Fabrics in Body Protective Systems

Gürgen S., Kuşhan M. C.
4th Asia Conference on Mechanical and Materials Engineering (ACMME 2016), Kuala-Lumpur, Malezya, 14 - 18 Temmuz 2016

Yenilikçi Bir İmalat Yöntemi Ultrasonik Yardımlı Sıcak Tornalama

GÜRGEN S., SOFUOĞLU M. A., ÇAKIR F. H., KUŞHAN M. C., ORAK S.
1st International Conference on Engineering Technology and Applied Sciences, Afyon, Türkiye, 21 - 22 Nisan 2016

Zırhlı Araçların Geleceği ve Bu Araçlardaki Yeni Kompozit Malzemeler

Kuşhan M. C.
21. Kara Araçları Teknoloji Paneli, Ankara, Türkiye, 31 Mayıs 2016, ss.1-2

The Relationship Between The European States Air Force and Their Geopolitical Positions

KUŞHAN M. C.
15th International Conference of Scientific Papers “Scientific Search and Education Air Force AFASES 2013, Brasov, Romanya, 24 - 26 Mayıs 2012, cilt.2013, ss.647-650

Abrasıve Propertıes Of Sılıcon Carbıde Partıcles In Shear Thıckenıng Fluıd

GÜRGEN S., KUŞHAN M. C.
Conference On Advances In Mechanıcal Engıneerıng, İstanbul, Türkiye, 13 - 16 Mayıs 2016

Abrasive Properties of Silicon Carbide Particles in Shear Thickening Fluid

GÜRGEN S., KUŞHAN M. C.
The 2nd International Conference on Advances in Mechanical Engineering – ICAME2016, İstanbul, Türkiye, 10 - 13 Mayıs 2016, cilt.1, ss.298-302

Yeni Bir Alışılmamış İmalat Yöntemi Sıcak Ultrasonik Yardımlı Tornalama

GÜRGEN S., SOFUOĞLU M. A., ÇAKIR F. H., KUŞHAN M. C., ORAK S.
1. Uluslararası Mühendislik Teknolojileri ve Uygulamalı Bilimler Konferansı (ICETAS 2016), afyon, Türkiye, 21 - 22 Nisan 2016

A400M gövdesinde kompozit malzeme uygulamaları

KUŞHAN M. C., ÇAKIR F. H., GÜRGEN S., SOFUOĞLU M. A.
International Conference on Natural Science and Engineering, 19 - 20 Mart 2016

Applications of Composite Materials in A400M Fuselage

KUŞHAN M. C., ÇAKIR F. H., GÜRGEN S., SOFUOĞLU M. A.
International Conference on Natural Science and Engineering (ICNASE’16), Kilis, Türkiye, 19 - 20 Mart 2016

An Optimization Approach to Prevent Chatter Vibrations

Sofuoğlu M. A., Çakır F. H., Gürgen S., Orak S., Çelik O. N., Kuşhan M. C.
27th The IIER International Conference, Samara, Rusya, 05 Haziran 2015, ss.37-39

Flexible fixturing systems for low production quantities

ÇAKIR F. H., GÜRGEN S., SOFUOĞLU M. A., ÇELİK O. N., KUŞHAN M. C., ORAK S.
27 th TheIIER International Conference, St. Petersburg, Rusya, 05 Haziran 2015

Flexible Fixturing Systems for Low Production Quantities

SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., ORAK S., ÇELİK O. N., KUŞHAN M. C.
27th The IIER International Conference, St. Petersburg, Rusya, 4 Aralık - 05 Haziran 2015

Türkiye Türkmenistan Savunma Sanayii ilişkileri

Kuşhan M. C.
Berkarar Döwletiñ Bagtyýarlyk Döwrüniñ Sagdyn Jemgyýýet Ideýasy, Asgabat, Türkmenistan, 12 Şubat 2015

Multi response optimization of turning operation with self-propelled rotary tool

GÜRGEN S., SOFUOĞLU M. A., ÇAKIR F. H., ORAK S., KUŞHAN M. C.
World Conference on Technology, Innovation and Entrepreneurship, İstanbul, Türkiye, 28 - 30 Mayıs 2015, ss.2592-2600 identifier

Finite Element Modeling of Ultrasonic Assisted Turning of Ti6Al4V Alloy

ÇAKIR F. H., GÜRGEN S., SOFUOĞLU M. A., ÇELİK O. N., KUŞHAN M. C.
World Conference on Technology, Innovation and Entrepreneurship, İstanbul, Türkiye, 28 - 30 Mayıs 2015, ss.2839-2848 identifier

Operational Improvements in The Assembly Process of Lead Cable Using New Methods

SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., KUŞHAN M. C.
World Conference on Technology, Innovation and Entrepreneurship, İstanbul, Türkiye, 28 - 30 Mayıs 2015, ss.2576-2585 identifier

A Novel Approach for Armor Applications of Shear Thickening Fluids in Aviatıon and Defense Industry

KUŞHAN M. C., GÜRGEN S., tolga ü., ÇEVİK S.
International Conference of Scientific Paper AFASES, bükreş, Romanya, 22 - 24 Mayıs 2014

Wireless Eddy Current Probe Prototype and Monitor Design and Aircraft Maintenace Applications

Engin G., Kuşhan M. C., Çevik S.
Applied Materials and Electronics Engineering, Kowloon, Hong Kong, 26 - 27 Nisan 2014

Havacılıkta Standartizasyonun Önemi

Kuşhan M. C.
Uluslararası “Standardizasyonun Küresel Ekonomiye Etkileri Sempozyumu”, İstanbul, Türkiye, 25 - 26 Kasım 2013

The Design of Laser Welding Varestraint Test for Weld Susceptibity of Inconel 718 Superalloy

Çevik S., Kuşhan M. C., Engin G.
Materials Science and Engineering, Darmstadt, Almanya, 23 - 24 Eylül 2013

New strategies for improvement of structural gas turbine engine parts

Uzunonat Y., Üzgür S., KUŞHAN M. C.
2nd International Conference on Intelligent Materials, Applied Mechanics and Design Science, IMAMD 2013, Guangzhou, Çin, 13 - 14 Nisan 2013, cilt.327, ss.1368-1373 identifier

Cost Reduction An Aircraft Engine Part Of Turbine Disc Manufacturing

Kuşhan M. C., Büyüksolak E., Çevik S., Göde E.
INTERNATIONAL CONFERENCE of SCIENTIFIC PAPER AFASES 2013, Brasov, Romanya, 23 Mayıs 2013 - 25 Mayıs 2103, cilt.2013, ss.651-658

A new system of failure warning and monitoring control system for gas turbine compressor (GTC)/auxiliary power unit (APU) of aircrafts and a sample study

Kushan M. C., Peng Z., Peng S.
2012 2nd International Conference on Frontiers of Manufacturing Science and Measuring Technology, ICFMM 2012, Xian, Çin, 12 - 13 Haziran 2012, ss.1633-1638 identifier identifier

The Effect of Laser Glazing on High Temperature Oxidation Resistance of Thermal Barrier Coatings

DİLTEMİZ S. F., KUŞHAN M. C.
International Conference on Materials Science and Information Technology (MSIT 2011), Singapore, Singapur, 16 - 18 Eylül 2011, ss.315-316 identifier identifier

New Strategies for Improvement of Structural Gas Turbine Engine Parts

UZUNONAT Y., ÇEVİK S., KUŞHAN M. C.
International Conference on Mechanical Engineering, Robotics and Aerospace, 20 Ekim 2011 - 22 Ekim 2012, cilt.1

STATE-OF-ART TECHNOLOGY ALLVAC 718 Plus SUPERALLOY FOR GAS TURBINE ENGINE PARTS

Uzgur S., UZUNONAT Y., Diltemiz F., KUŞHAN M. C., Gunay R.
International Conference on Advanced Material Research, Chongqing, Çin, 21 - 23 Ocak 2011, cilt.213, ss.131-132 identifier identifier

MoSi2 Composites for High Temperature Structural Applications

Uzunonat Y., Uzgur S., Diltemiz S. F., Kushan M. C., Olmez R.
International Conference on Key Engineering Materials, Sanya, PEOPLES R CHINA, 25 - 27 Mart 2011, cilt.214, ss.103-105 identifier identifier

Cyclic Oxidation Behaviour of MoSi2 and MoSi2-Si3N4 Composites for Aircraft Gas Turbine Elements

Uzunonat Y., Uzgur S., Diltemiz S. F., Kushan M. C.
International Conference on Key Engineering Materials, Sanya, PEOPLES R CHINA, 25 - 27 Mart 2011, cilt.214, ss.349-351 identifier identifier

The Application of MoSi2 as High Temperature Materials in Gas Turbine Engines

KUŞHAN M. C., diltemiz S. F., UZUNONAT Y.
The Fifth International Conference on High Performance Ceramics, 10 - 13 Mayıs 2007, cilt.1, ss.135-136

Frequency Optimization of a Vehicle Hood

KUŞHAN M. C., ZAFER N.
The First Cappadocia Mechanical Engineering Symposium, Niğde, Türkiye, 14 - 16 Temmuz 2004

Uçak Yapı Malzemeleri

KUŞHAN M. C., ZAFER N.
I. UlusalMetalurji ve Malzeme Gunleri, Eskişehir, Türkiye, 27 - 28 Mayıs 2004

A Method for the Investigation of Superalloys Weldability

KUŞHAN M. C., Saraçyakupoğlu t., erdem m.
Advanced Engineering Design, Prag, Çek Cumhuriyeti, 1 - 04 Haziran 2003, cilt.1, ss.21-22

Türkiye Uçak Mühendisliği Eğitiminde Bakım Mühendisliğinin Önemi

KUŞHAN M. C.
2. Ulusal Uçak Havacılık ve Uzay Mühendisliği Kurultayı, Eskişehir, Türkiye, 10 Mayıs 2003, cilt.1, ss.79-84

A new Weldabilty Test Method For Some Aero Engine Materials

KUŞHAN M. C.
Kazakistan Devlet Üniversitesi Kongresi, 1 - 04 Ekim 2002, cilt.1, ss.26-29

EB Varestraint Test Method and an Application

KUŞHAN M. C., Saraçyakupoğlu T., erdem m.
23rd ICAS Congress, Toronto, Kanada, 8 - 02 Eylül 2002, cilt.1, ss.8631-8634

EB ve TIG Kaynaklı Inconel 718’in Kaynak Sonrası Çökelme Mekanizmasındaki Farklılıklar

yaman m., KUŞHAN M. C.
1. Uluslararası Havacılık ve İleri Teknolojiler Sempozyumu, 8 - 10 Mart 1995, cilt.1, ss.413-421

Kitap & Kitap Bölümleri

Hibrit, Cam Elyaf Takviyeli Polimer Çubuk (GFRP) ve Çelik Donatıların Performanslarının Karşılaştırmalı İncelenmesi

Demir M., Daz B., AFACAN K. B., ŞİMŞEK C., KUŞHAN M. C.
İnşaat Mühendisliğinde Yenilikçi Yaklaşımlar ve İnşaat Teknolojileri, Doç. Dr. Atila KUMBASAROĞLU, Editör, Bidge Yayınları, ss.60-75, 2023

Aluminum-Lithium Alloys in Aircraft Structures

Kaya E., Sheikhi M. R., Gürgen S., Kuşhan M. C.
Materials, Structures & Manufacturing for Aircraft, Kuşhan Melih Cemal , Gürgen Selim, Sofuoğlu Mehmet Alper, Editör, Springer Nature Switzerland AG, Zürich, ss.1-25, 2022

A dan Z ye Dünya Uçakları Helikopterleri ve İnsansız Hava Araçları

KUŞHAN M. C., GÜRGEN S.
Nisan Kitabevi, Eskişehir, 2016

Fatigue Failure in Aircraft Structural Components

GÜRGEN S., KUŞHAN M. C., seyid F d.
Handbook of Materials Failure Analysis With Case Studies from the Aerospace and Automotive Industries, Abdel Salam Hamdy Makhlouf, Mahmood Aliofkhazraei, Editör, Elsevier, Waltham, ss.261-276, 2015

Wireless Eddy Current Probe Prototype and Monitor Design and Aircraft Maintenance Applications

gode e., KUŞHAN M. C., ÇEVİK S.
Advances in Applied Materials and Electronics Engineering III, Brendan Gan, Y. Gan, Y. Yu, Editör, TTP, Zürich, ss.448-451, 2014

Potential of MoSi2 and MoSi2-Si3N4 Composites for Aircraft Gas Turbine Engines

KUŞHAN M. C., UZUNONAT Y., ÇEVİK S., DİLTEMİZ S. F.
Recent Advances in Aircraft Technology, Agarwal Ramesh K., Editör, InTech, ss.97-115, 2012

ALLVAC 718 Plus Superalloy For Aerospace Applications

KUŞHAN M. C., ÇEVİK S., UZUNONAT Y., fehmi d.
Recent Advances in Aircraft Technology, Ramesh K. Agarwal, Editör, INTECH, Zagrep, ss.75-96, 2012

Allvac 718 Plus Superalloy for Aircraft Engine Applications

KUŞHAN M. C., ÇEVİK S., UZUNONAT Y., DİLTEMİZ S. F.
Recent Advances in Aircraft Technology, Agarwal Ramesh K., Editör, InTech, ss.75-96, 2012

Potential of MoSi2 and MoSi2-Si3N4 Composites for Aircraft Gas Turbine Engines

KUŞHAN M. C., UZUNONAT Y., ÇEVİK S., diltemiz s. F.
Recent Advances in Aircraft Technology, Ramesh K. Agarwal, Editör, INTECH, Zagrep, ss.97-116, 2012

a'DAN z'ye Dünya Uçakları ve Helikopterleri

Kuşhan M. C.
Nisan Yayınları, Ankara, 2004

Metrikler

Yayın

191

Atıf (WoS)

1137

H-İndeks (WoS)

19

Atıf (Scopus)

1483

H-İndeks (Scopus)

16

Atıf (Scholar)

1334

H-İndeks (Scholar)

17

Atıf (TrDizin)

2

H-İndeks (TrDizin)

1

Proje

18

Fikri Mülkiyet

1

Tez Danışmanlığı

10

Açık Erişim

12
BM Sürdürülebilir Kalkınma Amaçları