Prof. Dr. SELİM G&#220;RGEN

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING , cilt.22, 2022 (SCI-Expanded, Scopus)

23. Wear behavior of UHMWPE composites under oxidative effect

Gürgen S., Sofuoğlu M. A.

POLYMER DEGRADATION AND STABILITY , cilt.199, 2022 (SCI-Expanded, Scopus)

24. The Influence of UV Radiation Aging on Degradation of Shear Thickening Fluids

Zurowski R., Tryznowski M., GÜRGEN S., Szafran M., Swiderska A.

MATERIALS , cilt.15, sa.9, 2022 (SCI-Expanded, Scopus)

25. A State-of-the-Art Review on Hemming: A Materials Processing Technology for Mechanical Joints

GÜRGEN S., Pruncu C.

APPLIED MECHANICS REVIEWS , cilt.74, sa.2, 2022 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

26. Anti-impact design of multi-layer composites enhanced by shear thickening fluid

Sheikhi M. R., GÜRGEN S.

COMPOSITE STRUCTURES , cilt.279, 2022 (SCI-Expanded, Scopus)

27. An electromechanical in situ viscosity measurement technique for shear thickening fluids

HAYDARLAR G., SOFUOĞLU M. A., GÜRGEN S., KUŞHAN M. C., TEKKALMAZ M.

ADVANCED ENGINEERING FORUM , 2021 (Hakemli Dergi)

28. Finite element analysis of different material models for polyurethane elastomer using estimation data sets

Sheikhi M. R., Shamsadinlo B., ÜNVER Ö., GÜRGEN S.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.43, sa.12, 2021 (SCI-Expanded, Scopus)

29. Micro-machining of UHMWPE composites reinforced with carbide fillers

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING , cilt.21, sa.4, 2021 (SCI-Expanded, Scopus)

30. An investigation on wear behavior of UHMWPE/carbide composites at elevated temperatures

Gürgen S., Sert A., Kuşhan M. C.

Journal of Applied Polymer Science , cilt.138, sa.16, 2021 (SCI-Expanded, Scopus)

31. Ultrasonic Inspection for Microstructural and Mechanical Properties of Ductile Cast Iron

Özdemir Ö., Gürgen S., Kuşhan M. C.

Advanced Engineering Forum , cilt.39, ss.9-19, 2021 (Hakemli Dergi)

32. Smart polymer integrated cork composites for enhanced vibration damping properties

Gürgen S., SOFUOĞLU M. A.

COMPOSITE STRUCTURES , cilt.258, 2021 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

33. Development of Eco-friendly Shock-absorbing Cork Composites Enhanced by a Non-Newtonian Fluid

GÜRGEN S., Fernandes F. A. O., de Sousa R. J. A., KUŞHAN M. C.

APPLIED COMPOSITE MATERIALS , cilt.28, sa.1, ss.165-179, 2021 (SCI-Expanded, Scopus)

34. Rheological modeling of multi-phase shear thickening fluid using an intelligent methodology

Gürgen S., Sofuoğlu M. A., Kuşhan M. C.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.42, sa.11, 2020 (SCI-Expanded, Scopus)

35. Rheological and deformation behavior of natural smart suspensions exhibiting shear thickening properties

GÜRGEN S., de Sousa R. J. A.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING , cilt.20, sa.4, 2020 (SCI-Expanded, Scopus)

36. Integration of shear thickening fluid into cutting tools for improved turning operations

SOFUOĞLU M. A., GÜRGEN S., KUŞHAN M. C.

JOURNAL OF MANUFACTURING PROCESSES , cilt.56, ss.1146-1154, 2020 (SCI-Expanded, Scopus)

37. Experimental investigation of newly designed cutting tool inserts in turning

Journal of Production Systems and Manufacturing Science , 2020 (Hakemli Dergi)

38. Vibration attenuation of sandwich structures filled with shear thickening fluids

COMPOSITES PART B-ENGINEERING , cilt.186, 2020 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

39. Numerical modeling of fabrics treated with multi-phase shear thickening fluids under high velocity impacts

THIN-WALLED STRUCTURES , cilt.148, 2020 (SCI-Expanded, Scopus)

40. Stab resistance of smart polymer coated textiles reinforced with particle additives

Gürgen S., Yildiz T.

COMPOSITE STRUCTURES , cilt.235, 2020 (SCI-Expanded, Scopus)

41. Low-velocity impact performance of UHMWPE composites consolidated with carbide particles

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING , cilt.20, sa.2, 2020 (SCI-Expanded, Scopus)

42. Numerical modeling of roller hemming operation on a straight edge part

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.41, sa.11, 2019 (SCI-Expanded, Scopus)

43. Experimental investigation on vibration characteristics of shear thickening fluid filled CFRP tubes

COMPOSITE STRUCTURES , cilt.226, 2019 (SCI-Expanded, Scopus)

44. Polishing operation of a steel bar in a shear thickening fluid medium

GÜRGEN S., SERT A.

COMPOSITES PART B-ENGINEERING , cilt.175, 2019 (SCI-Expanded, Scopus)

45. Wear performance of UHMWPE based composites including nano-sized fumed silica

GÜRGEN S., Sackesen I., KUŞHAN M. C.

COMPOSITES PART B-ENGINEERING , cilt.173, 2019 (SCI-Expanded, Scopus)

46. Fatigue and corrosion behavior of in-service AA7075 aircraft component after thermo-mechanical and retrogression and re-aging treatments

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS , cilt.233, sa.9, ss.1764-1772, 2019 (SCI-Expanded, Scopus)

47. Tribological behavior of UHMWPE matrix composites reinforced with PTFE particles and aramid fibers

GÜRGEN S., ÇELİK O. N., KUŞHAN M. C.

COMPOSITES PART B-ENGINEERING , cilt.173, 2019 (SCI-Expanded, Scopus)

48. Multi-criteria decision-making analysis of different non-traditional machining operations of Ti6Al4V

GÜRGEN S., ÇAKIR F. H., SOFUOĞLU M. A., ORAK S., KUŞHAN M. C., Li H.

SOFT COMPUTING , cilt.23, sa.13, ss.5259-5272, 2019 (SCI-Expanded, Scopus)

49. An efficient approach by adjusting bounds for heuristic optimization algorithms

SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S.

SOFT COMPUTING , cilt.23, sa.13, ss.5199-5212, 2019 (SCI-Expanded, Scopus)

50. Design and Economic Analysis of a Novel Hot Ultrasonic Machining System

SOFUOĞLU M. A., GÜRGEN S., ÇAKIR F. H., ORAK S., KUŞHAN M. C.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.22, sa.2, ss.277-282, 2019 (ESCI, TRDizin)

51. A Numerical Investigation on Oblique Projectile Impact Behavior of AA5083-H116 Plates

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.22, sa.2, ss.293-301, 2019 (ESCI, TRDizin)

52. An investigation on composite laminates including shear thickening fluid under stab condition

JOURNAL OF COMPOSITE MATERIALS , cilt.53, sa.8, ss.1111-1122, 2019 (SCI-Expanded, Scopus)

53. Tuning the Frictional Properties of Carbon Fabrics Using Boron Carbide Particles

GÜRGEN S., Majumdar A.

FIBERS AND POLYMERS , cilt.20, sa.4, ss.725-731, 2019 (SCI-Expanded, Scopus) Sürdürülebilir Kalkınma

54. A parametric investigation of roller hemming operation on a curved edge part

GÜRGEN S., SOFUOĞLU M. A., KUŞHAN M. C.

ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING , cilt.19, sa.1, ss.11-19, 2019 (SCI-Expanded, Scopus)

55. Rheological compatibility of multi-phase shear thickening fluid with a phenomenological model

SMART MATERIALS AND STRUCTURES , cilt.28, sa.3, 2019 (SCI-Expanded, Scopus)

56. Surface topography of nickel-based superalloy manufactured with direct metal laser sintering (DMLS) method

Solakoglu E. U., GÜRGEN S., KUŞHAN M. C.

SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES , cilt.7, sa.1, 2019 (SCI-Expanded, Scopus)

57. Yeni sıcak ultrasonik yardımlı imalat ünitesi tasarımı ve ekonomik analizi

SOFUOĞLU M. A., GÜRGEN S., ÇAKIR F. H., ORAK S., KUŞHAN M. C.

Journal of Polytechnic , 2019 (TRDizin)

58. Impact Behavior of Preloaded Aluminum Plates at Oblique Conditions

ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , cilt.44, sa.2, ss.1649-1656, 2019 (SCI-Expanded, Scopus)

59. An Investigation on Surface Roughness and Tool Wear in Turning Operation of Inconel 718

GÜRGEN S., Tali D., KUŞHAN M. C.

JOURNAL OF AEROSPACE TECHNOLOGY AND MANAGEMENT , cilt.11, 2019 (ESCI, Scopus)

60. Tuning the Rheology of Nano-Sized Silica Suspensions with Silicon Nitride Particles

Çakır F. H., Sofuoğlu M. A., Gürgen S.

JOURNAL OF NANO RESEARCH , cilt.56, ss.63-70, 2019 (SCI-Expanded, Scopus)

61. Machining of Hastelloy-X based on finite element modelling

Advanced Engineering Forum , cilt.30, 2018 (Hakemli Dergi)

62. The Influence of Boundary Condition on the Impact Behavior of High Performance Fabrics

Advanced Engineering Forum , cilt.28, ss.47-54, 2018 (Hakemli Dergi)

63. Experimental investigation of machining characteristics and chatter stability for Hastelloy-X with ultrasonic and hot turning

SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., ORAK S., KUŞHAN M. C.

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.95, ss.83-97, 2018 (SCI-Expanded, Scopus)

64. Numerical investigation of hot ultrasonic assisted turning of aviation alloys

SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., ORAK S., KUŞHAN M. C.

Journal of the Brazilian Society of Mechanical Sciences and Engineering , cilt.40, sa.3, 2018 (SCI-Expanded, Scopus)

65. Shear thickening fluids in protective applications: A review

GÜRGEN S., KUŞHAN M. C., Li W.

PROGRESS IN POLYMER SCIENCE , cilt.75, ss.48-72, 2017 (SCI-Expanded, Scopus)

66. The ballistic performance of aramid based fabrics impregnated with multi-phase shear thickening fluids

POLYMER TESTING , cilt.64, ss.296-306, 2017 (SCI-Expanded, Scopus)

67. High Performance Fabrics in Body Protective Systems

Gürgen S., Kuşhan M. C.

Materials Science Forum , cilt.880, ss.132-135, 2017 (Scopus)

68. Effect of heat treatment on the bending behavior of aluminum alloy tubes

SERT A., GÜRGEN S., ÇELİK O. N., KUŞHAN M. C.

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , cilt.31, sa.11, ss.5273-5278, 2017 (SCI-Expanded, Scopus)

69. The stab resistance of fabrics impregnated with shear thickening fluids including various particle size of additives

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING , cilt.94, ss.50-60, 2017 (SCI-Expanded, Scopus)

70. The effect of silicon carbide additives on the stab resistance of shear thickening fluid treated fabrics

GÜRGEN S., Diltemiz S. F., KUŞHAN M. C.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , cilt.24, sa.16, ss.1381-1390, 2017 (SCI-Expanded, Scopus)

71. Oxidation and thermal shock behavior of thermal barrier coated 18/10CrNi alloy with coating modifications

JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , cilt.31, sa.1, ss.149-155, 2017 (SCI-Expanded, Scopus)

72. Rheological Properties of Shear Thickening Fluids

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.19, sa.4, ss.409-414, 2016 (ESCI, Scopus, TRDizin)

73. Kayma Altında Katılaşan Sıvıların Reolojik Özellikleri

Politeknik Dergisi , cilt.19, sa.4, ss.409-414, 2016 (TRDizin)

74. The rheology of shear thickening fluids with various ceramic particle additives

GÜRGEN S., Li W., KUŞHAN M. C.

MATERIALS & DESIGN , cilt.104, ss.312-319, 2016 (SCI-Expanded, Scopus)

75. The effect of carbide particle additives on rheology of shear thickening fluids

GÜRGEN S., KUŞHAN M. C., Li W.

KOREA-AUSTRALIA RHEOLOGY JOURNAL , cilt.28, sa.2, ss.121-128, 2016 (SCI-Expanded, Scopus)

76. Numerical Simulation of Roller Hemming Operation on Convex Edge Convex Surface Parts

GÜRGEN S., KUŞHAN M. C., Diltemiz S. F.

Advanced Engineering Forum , cilt.15, ss.75-84, 2016 (Hakemli Dergi)

77. Fatigue failure in aircraft structural components

HANDBOOK OF MATERIALS FAILURE ANALYSIS WITH CASE STUDIES FROM THE AEROSPACE AND AUTOMOTIVE INDUSTRIES , ss.261-277, 2016 (SCI-Expanded)

78. Multi Response Optimization Of Turning Operation With Self-Propelled Rotary Tool

Gürgen S., Çakır F. H., Sofuoğlu M. A., Orak S., Kuşhan M. C.

Procedia - Social and Behavioral Sciences , sa.195, ss.2576-2585, 2015 (Hakemli Dergi)

79. Finite Element Modeling of Ultrasonic Assisted Turning of Ti6Al4V Alloy

Çakır F. H., Gürgen S., Sofuoğlu M. A., Çelik O. N., Kuşhan M. C.

Finite Element Modeling of Ultrasonic Assisted Turning of Ti6Al4V Alloy , sa.195, ss.2839-2848, 2015 (Hakemli Dergi)

80. Operational Improvements in The Assembly Process of Lead Cable Using New Methods

Sofuoğlu M. A., Çakır F. H., Gürgen S., Kuşhan M. C.

Procedia - Social and Behavioral Sciences , sa.195, ss.2576-2585, 2015 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 70

1. Recent developments and future trends in micro-milling tools and coatings

KUŞHAN M. C., GÜRGEN S., SOFUOĞLU M. A.

IV. International Turkic World Congress on Science and Engineering, Niğde, Türkiye, 23 - 24 Haziran 2022, (Tam Metin Bildiri)

2. EFFECT OF UHMWPE COATING ON THE TRIBOLOGICAL BEHAVIOR OF A LASER TEXTURED STEEL

SERT A., GÜRGEN S.

6th International Conference on Advances in Mechanical Engineering, İstanbul, Türkiye, 20 Ekim 2021, ss.1338-1341, (Tam Metin Bildiri)

3. Yeni polimer matris kompozitlerin işlenebilirliğinin incelenmesi

GÜRGEN S., YAMAN C., KAYA M., DÖNMEZ D., ÜLGEN B., SOFUOĞLU M. A.

6. Uluslararası Mühendislik ve Teknoloji Yönetimi Kongresi, Türkiye, 20 Kasım 2021, (Tam Metin Bildiri)

4. ARAMID fabrics used as ballistic plate for army

8th International Fiber and Polymer Research Symposium, Türkiye, 18 - 19 Haziran 2021, (Tam Metin Bildiri)

5. Anti impact properties of smart cork composites

7. Uluslararası Mühendislik Mimarlık ve Tasarım Kongresi, Türkiye, 21 - 22 Mayıs 2021, (Tam Metin Bildiri)

6. Mikro frezelemede son gelişmeler ve gelecekteki eğilimler

7. Uluslararası Mühendislik Mimarlık ve Tasarım Kongresi, Türkiye, 21 - 22 Mayıs 2021, (Tam Metin Bildiri)

7. Role of friction in pull-out forces of textiles

5. Uluslararası Mühendislik ve Teknoloji Yönetimi Kongresi, Türkiye, 24 - 25 Nisan 2021, (Tam Metin Bildiri)

8. Milling of dispersion hardened polymers

5. Uluslararası Mühendislik ve Teknoloji Yönetimi Kongresi, Türkiye, 24 - 25 Nisan 2021, (Tam Metin Bildiri)

9. Polimer Kompozitlerin Mikro İşlenebilirliğinin İncelenmesi: Bir Literatür Değerlendirmesi

4. Uluslararası Akdeniz Sempozyumu, Mersin, Türkiye, 22 - 24 Ekim 2020, (Tam Metin Bildiri)

10. Havacılık ve uzay uygulamalarında sürdürülebilir ve çevre dostu mantar kompozitleri:ECOCORK projesi

4. Uluslararası Akdeniz Sempozyumu, 22 - 24 Ekim 2020, (Tam Metin Bildiri)

11. Polimer kompozitlerin mikro işlenebilirliğinin incelenmesi: Bir literatür değerlendirmesi

4. Uluslararası Akdeniz Sempozyumu, 22 - 24 Ekim 2020, (Tam Metin Bildiri)

12. Deformation of STF Treated Spall Liners

International Symposium on Aircraft Technology, Eskişehir, Türkiye, 22 - 24 Eylül 2020, (Tam Metin Bildiri)

13. Impact Performance of UHMWPE Structures

GÜRGEN S., SOFUOĞLU M. A., ÇAKIR F. H., KUŞHAN M. C.

International Symposium on Aircraft Technology, Eskişehir, Türkiye, 22 - 24 Eylül 2020, (Tam Metin Bildiri)

14. Dünyada ve Ülkemizde Sivil Havacılık Bakım Onarım ve Yenileme (BOY) Faaliyetleri

9. Uluslararası Bakım Teknolojileri Kongresi ve Sergisi-BTKS, Denizli, Türkiye, 26 - 28 Eylül 2019, cilt.1, ss.185-191, (Tam Metin Bildiri)

15. Testing procedure of spall liner in armored vehicles

International Conference on Advances in Mechanical Engineering, İstanbul, Türkiye, 17 - 19 Aralık 2019, cilt.1, ss.77-80, (Tam Metin Bildiri)

16. Frictional properties of carbon fiber reinforced UHMWPE composites

International Conference on Advances in Mechanical Engineering, İstanbul, Türkiye, 17 - 19 Aralık 2019, cilt.1, ss.94-96, (Tam Metin Bildiri)

17. Modeling of STF impregnated textiles in yarn pull-out testing

International Conference on Advances in Mechanical Engineering, İstanbul, Türkiye, 17 - 19 Aralık 2019, cilt.1, ss.81-84, (Tam Metin Bildiri)

18. RESEARCH ON APPLICATIONS OF MINI-TURBOJET AND TURBOJET ENGINED MILITARY UAVS

Türkay M., GÜRGEN S., keskin g., DURMUŞ S., KUŞHAN M. C.

International Conference of Scientific Paper AFASES 2019, 31 Mayıs - 02 Haziran 2019, (Tam Metin Bildiri)

19. GLIDER FLIGHT TRAINING APPLICATION IN TURKISH AIR FORCE

keskin g., KAFALI H., DURMUŞ S., GÜRGEN S., KUŞHAN M. C.

International Conference of Scientific Paper AFASES 2019, 31 Mayıs - 02 Haziran 2019, (Tam Metin Bildiri)

20. Influence of Manufacturing Conditions on Wear Properties of UHMWPE

International Conference on Advances in Mechanical and Mechatronics Engineering, Ankara, Türkiye, 8 - 09 Kasım 2018, cilt.1, ss.62-64, (Tam Metin Bildiri)

21. Rheology of Cornstarch Suspension with Carbide Particles

International Conference on Advances in Mechanical and Mechatronics Engineering, Ankara, Türkiye, 8 - 09 Kasım 2018, cilt.1, ss.59-61, (Tam Metin Bildiri)

22. Roller Hemming Operation on a Vehicle Door

GÜRGEN S., ÇAKIR F. H., SOFUOĞLU M. A., KUŞHAN M. C.

International Conference on Advances in Mechanical and Mechatronics Engineering, Ankara, Türkiye, 8 - 09 Kasım 2018, cilt.1, ss.22-24, (Tam Metin Bildiri)

23. Composite Structures of C919

Conferencefora 8th International Conference, Singapore, Singapur, 26 - 27 Ağustos 2018, cilt.1, ss.1-4, (Tam Metin Bildiri)

24. An experimental investigation of the ultrasonic-assisted machining of Ti-6Al-4V

ÇAKIR F. H., GÜRGEN S., ORAK S., KUŞHAN M. C., SOFUOĞLU M. A.

UMTIK 2018, 3 - 06 Temmuz 2018, (Tam Metin Bildiri)

25. Tribological and Finite Element Study on the Elastic Behaviour of a Steel Sphere against a Deformable Flat Material

GÜRGEN S., SERT A.

2nd International Conference on Tribology, İstanbul, Türkiye, 18 - 20 Nisan 2018, cilt.1, ss.237-240, (Tam Metin Bildiri)

26. Investigation on Tribological Behavior of Laser Surface Treated Ti6Al4V Alloy

ÇAVUŞOĞLU N., GÜRGEN S., ÇAKIR F. H., SERT A.

2nd International Conference on Tribology (TURKEYTRIB’18), İstanbul, Türkiye, 18 - 20 Nisan 2018, ss.233-236, (Tam Metin Bildiri)

27. Seramik Tozu İçeren Nano Süspansiyonların Kumaş Yüksek Hızlı Çarpma Direncine Etkileri

GÜRGEN S., ÇAKIR F. H., SOFUOĞLU M. A., KUŞHAN M. C.

3. Uluslararası Lif ve Polimer Araştırmaları Sempozyumu, Bursa, Türkiye, 8 - 09 Mart 2018, cilt.1, ss.1-6, (Tam Metin Bildiri)

28. Shear strength of AA7075 lap joints after various joining methods

International Advanced Researches Engineering Congress, 16 - 18 Kasım 2017, (Tam Metin Bildiri)

29. Failure of Sandwich Structures in Aviation

GÜRGEN S., GÖDE E., KUŞHAN M. C.

International Advanced Researches Engineering Congress, Osmaniye, Türkiye, 16 - 18 Kasım 2017, cilt.1, ss.695-697, (Tam Metin Bildiri)

30. Unmanned Systems For Navies

ÇAMURDAN B., vural h., GÜRGEN S., KUŞHAN M. C.

Euroasian Multidisciplinary Forum, Tbilisi, Gürcistan, 6 - 07 Ekim 2017, cilt.1, ss.15, (Özet Bildiri)

31. Numerical investigation of hot ultrasonic assisted turning of titanium alloy

ÇAKIR F. H., GÜRGEN S., SOFUOĞLU M. A., KUŞHAN M. C., ORAK S.

3rd International Conference on Engineering and Natural Sciences (ICENS 2017), 3 - 07 Mayıs 2017, (Tam Metin Bildiri)

32. Numerical investigation of machining characteristics of Hastelloy-x

SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., ORAK S., KUŞHAN M. C.

International Science and Technology Conference (ISTEC 2017), 17 - 19 Temmuz 2017, (Tam Metin Bildiri)

33. TURNING OPERATION OF NICKEL BASED SUPERALLOY RENE 41

tali d., GAŞAN H., GÜLEŞEN M., GÜRGEN S., KUŞHAN M. C.

The IIER International Conference, Prag, Çek Cumhuriyeti, 21 - 22 Mart 2017, cilt.1, ss.1-3, (Tam Metin Bildiri)

34. A NEW SUPERALLOY: ALLVAC 718 Plus

SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., KUŞHAN M. C.

I S E RINTERNATIONAL CONFERENCE, Jakarta, Endonezya, 12 - 13 Ocak 2017, cilt.1, ss.1-4, (Tam Metin Bildiri)

35. ALLVAC 718 PLUSTM

SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., KUŞHAN M. C.

ISER International Conference, 12th -13th January 2017, Jakarta, Indonesia, Jakarta, Endonezya, 12 - 13 Ocak 2017, cilt.1, ss.1-4, (Tam Metin Bildiri)

36. Springback Behavior of AA6082T6 Tubes in Three-point Bending Operation

SOFUOĞLU M. A., GÜRGEN S., ÇAKIR F. H., ORAK S.

7th International Conference on Engineering, Project, and Production Management (EPPM), Bialystok, Polonya, 21 - 23 Eylül 2016, cilt.182, ss.658-664, (Tam Metin Bildiri)

37. A Study of Quantitative Metallography and X Ray Diff raction Methods for Quantifying Carbide Amount in AISI D2 Tool Steel

SERT A., GÜRGEN S., ÇELİK O. N.

IMMC 2016 18th International Metallurgy & Materials Congress, İstanbul, Türkiye, 29 Ekim - 01 Kasım 2016, ss.459-462, (Tam Metin Bildiri)

38. Springback behaviour of AA6082T6 tubes in the three point bending operation

SOFUOĞLU M. A., GÜRGEN S., ÇAKIR F. H., ORAK S.

7th International Conference on Engineering, Project,and Production Management (EPPM2016), Bialystok, Polonya, 21 - 23 Eylül 2016, (Özet Bildiri)

39. The Position of Turkısh Aır Transportatıon in Europe

Çamurdan B., Çetin S., Gürgen S., Kuşhan M. C.

3rd International Multidisciplinary Scientific Conferences on Social Sciences and Arts, Varna, Bulgaristan, 22 - 31 Ağustos 2016, cilt.5, ss.849-855, (Tam Metin Bildiri)

40. Descrıptıon Of Modıfıcatıon Wıth New Armor Protectıon Plates For Helicopters

GÜRGEN S., şeniz kuşhan a., KUŞHAN M. C.

IAARHIES 28th International Conference on Engineering & Technology ICET – 2016, Shanghai, Çin, 18 - 19 Eylül 2016, (Tam Metin Bildiri)

41. Description of Modification of Armor Protection for Helicopters

GÜRGEN S., KUŞHAN AKIN S. R., KUŞHAN M. C.

28th IAARHIES International Conferences, Shanghai, Çin, 18 - 19 Eylül 2016, cilt.1, ss.66-69, (Tam Metin Bildiri)

42. High Performance Fabrics in Body Protective Systems

Gürgen S., Kuşhan M. C.

4th Asia Conference on Mechanical and Materials Engineering (ACMME 2016), Kuala-Lumpur, Malezya, 14 - 18 Temmuz 2016, (Tam Metin Bildiri)

43. Yenilikçi Bir İmalat Yöntemi Ultrasonik Yardımlı Sıcak Tornalama

GÜRGEN S., SOFUOĞLU M. A., ÇAKIR F. H., KUŞHAN M. C., ORAK S.

1st International Conference on Engineering Technology and Applied Sciences, Afyon, Türkiye, 21 - 22 Nisan 2016, (Tam Metin Bildiri)

44. Abrasıve Propertıes Of Sılıcon Carbıde Partıcles In Shear Thıckenıng Fluıd

Conference On Advances In Mechanıcal Engıneerıng, İstanbul, Türkiye, 13 - 16 Mayıs 2016, (Tam Metin Bildiri)

45. Abrasive Properties of Silicon Carbide Particles in Shear Thickening Fluid