| AVESİS

Publication Type

Publication Sub Type

(WOS) Research Areas

SDG

Researchers

Year


Published journal articles indexed by SCI, SSCI, and AHCI
Innovative-serpentine cooling method of batteries: Both thermal and statistical method approach Yetik Ö. INTERNATIONAL JOURNAL OF THERMAL SCIENCES , vol.208, 2025 (SCI-Expanded)
Comparison of high-temperature friction and wear behaviours of Ti6Al4V produced by additive manufacturing and casting Çakar A., Kılıçay K. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART B: JOURNAL OF ENGINEERING MANUFACTURE , pp.1-10, 2024 (SCI-Expanded)
Repairing Al7075 surface using cold spray technology with different metal/ceramic powders Dayı S. C., Kılıçay K. Surface and Coatings Technology , vol.489, 2024 (SCI-Expanded)
A practical approach to fabrication of nano-Al2O3 reinforced MMC coatings by cold spray: Characterization of nanomechanical and tribological performance Kılıçay K. Materials Today Communications , vol.39, 2024 (SCI-Expanded)
3D biomechanical model that can perform dynamic analysis of the upper extremity and L5/S1 joints without the use of force sensor Yanikören M., Yilmaz S., Gündoğdu Ö. Sadhana - Academy Proceedings in Engineering Sciences , vol.49, no.3, 2024 (SCI-Expanded)
Numerical investigation of combined effects of radiation and convection heat transfer from tube banks placed in a participating medium SERTEL H., ALTAÇ Z. NUMERICAL HEAT TRANSFER PART A-APPLICATIONS , vol.85, no.8, pp.1191-1217, 2024 (SCI-Expanded)
Investigation of thermal performance at forced convection in plate-fin heat sink Kosdere O., SERT Z., ALTUN Ö. Energy , vol.307, 2024 (SCI-Expanded)
Tribomechanical characterization of ceramic reinforced composite coatings for modification of cylinder liner of heavy-duty diesel engines Tat M. E., Kaya E. INTERNATIONAL JOURNAL OF ENGINE RESEARCH , vol.1, pp.1-17, 2024 (SCI-Expanded)
Comparison of tribological performance of hard chrome and heat-treated electroless Ni–P platings Kılıçay K., Gökel S. SURFACE ENGINEERING , vol.0, pp.1-11, 2024 (SCI-Expanded)
Thermal modeling of variable process parameter effects in powder bed fusion using electron beam Kirim B., Söylemez E., Tan E., Yasa E. Rapid Prototyping Journal , 2024 (SCI-Expanded)
Exergetic analysis of a domestic refrigerator with an innovative mini-channel flat tube condenser Ozturk M. M., DOĞAN B., Tosun M., Tosun T., ERBAY L. B. Journal of Thermal Analysis and Calorimetry , 2024 (SCI-Expanded)
Investigation of ultrasonic vibration assisted orthogonal turning under dry and minimum quantity lubrication conditions and performing sustainability analyses Duman E., YAPAN Y. F., Salvi H., SOFUOĞLU M. A., Khanna N., UYSAL A. Journal of Cleaner Production , vol.434, 2024 (SCI-Expanded)
Biomimetic dental implant production using selective laser powder bed fusion melting: In-vitro results Onder M. E., Culhaoglu A., Ozgul O., Tekin U., Atıl F., Taze C., et al. Journal of the Mechanical Behavior of Biomedical Materials , vol.151, 2024 (SCI-Expanded)
Nanoencapsulation of phase change material with CuO nanoparticles: Development of thermal properties for energy storage TİMURALP Ç., Ercan E., ERÇETİN Ü., Aygun A., Altuner E. E., ŞEN F. INORGANIC CHEMISTRY COMMUNICATIONS , vol.170, 2024 (SCI-Expanded)
CFD investigation of pouchtype lithium-ion battery Mayıl A. S., Yetik Ö. Aircraft Engineering and Aerospace Technology , vol.96, no.7, pp.964-971, 2024 (SCI-Expanded)
Determining sex-related behavioral differences in manual material lifting and lowering movements during daily life Yanıkören M., Yılmaz S., Gündoğdu Ö. SCIENTIA IRANICA INTERNATIONAL JOURNAL OF SCIENCE & TECHNOLOGY , vol.32, pp.1-18, 2024 (SCI-Expanded)
Nanofluid-based cooling of prismatic lithium-ion battery packs: an integrated numerical and statistical approach MORALI U., YETİK Ö., Karakoc T. H. Journal of Thermal Analysis and Calorimetry , vol.149, no.2, pp.799-811, 2024 (SCI-Expanded)
COMBINED FORCED AND NATURAL CONVECTION FROM A SINGLE TRIANGULAR CYLINDER SERT Z. Isı Bilimi ve Tekniği Dergisi , vol.44, no.1, pp.71-88, 2024 (SCI-Expanded)
Evaluation of the performance of DLC Coatings (ta-C) of WC-Co tools while machining Al7075 alloy Çakir F. H., Yilmaz A., Sert Z. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART C: JOURNAL OF MECHANICAL ENGINEERING SCIENCE , vol.1, no.1, pp.1-13, 2024 (SCI-Expanded)
Synthesis of Y2O3 and graphite-added copper-based hybrid composites by powder metallurgy: Mechanical properties and tribological behavior Tokat Birgin P. Ç., Aydın H., Kaya E. SCIENCE OF SINTERING , vol.0, no.0, pp.1-16, 2024 (SCI-Expanded)
Corrosion behavior of SiC and FeCrC reinforced AISI 304 components fabricated by plasma wire arc additive manufacturing (P-WAAM) Bayar İ., ÖTEYAKA M. Ö., Çakir E., ULUTAN M. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture , vol.238, no.11, pp.1648-1657, 2024 (SCI-Expanded)
Influence of Borides on microstructure and mechanical properties of a Ni alloy KAYA E., Buytoz S. Materialpruefung/Materials Testing , vol.66, no.7, pp.1041-1052, 2024 (SCI-Expanded)
Injectable Boron Nitride‐Hyaluronic Acid Hybrid Hydrogels to Facilitate Joint Motion: Mechanical and Tribological Characterization Göncü Y., Ay G. M., Kucukbas A., Kar F., Ozbayer C., Kar E., et al. Advanced Therapeutics , vol.7, pp.1-11, 2024 (SCI-Expanded)
Numerical investigation of mixed convection from rectangular cylinders subjected to upper cross flow SERT Z., MAHİR N., ALTAÇ Z. NUMERICAL HEAT TRANSFER PART A-APPLICATIONS , vol.85, no.4, pp.570-591, 2024 (SCI-Expanded)
Choosing between commercially pure titanium and Ti-6Al-4V gyroid structures for orthopedic applications: An analysis through Timoshenko beam theory, the Gibson-Ashby model and experimental methods Depboylu F. N., Yasa E., Poyraz Ö., KORKUSUZ F., Popa A. Materials Today Communications , vol.39, 2024 (SCI-Expanded)
Thermal analysis of batteries and prediction with artificial neural networks YETİK Ö. Aircraft Engineering and Aerospace Technology , vol.96, no.7, pp.888-899, 2024 (SCI-Expanded)
Influence of post heat treatment on tribological and microstructural properties of plasma wire arc additive manufactured maraging steels Kaya E., Ulutan M., Çakır E., Buytoz S. MATERIALPRUEFUNG/MATERIALS TESTING , vol.1, no.1, pp.21-30, 2024 (SCI-Expanded)
Effect of Heat Treatment and Hot Isostatic Pressing on the Corrosion Behavior of Ti6Al4 V Parts Produced by Electron Beam Melting Additive Manufacturing Technology Karasoglu M., ÖTEYAKA M. Ö., YASA E., Tan E., KUŞHAN M. C. ACS Omega , vol.9, no.27, pp.29904-29916, 2024 (SCI-Expanded)
Microstructural, Mechanical, and Tribological Characteristics of Ceramic Reinforced Al/Cu Hybrid Matrix Composites Kaya E., Tokat Birgin P. Ç. PHYSICS OF METALS AND METALLOGRAPHY , vol.125, no.7, pp.797-808, 2024 (SCI-Expanded)
Detection of residual stresses with impedance spectroscopy: A novel approach SOFUOĞLU M. A., Haydarlar G., Sheikhi M. R., Hopali C., TEKKALMAZ M. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART E-JOURNAL OF PROCESS MECHANICAL ENGINEERING , 2024 (SCI-Expanded)
Ceramic reinforced composite coatings on cold work tool steel fabricated by wired direct energy deposited plasma KAYA E. Surface and Coatings Technology , vol.475, 2023 (SCI-Expanded)
Sustainability evaluation of a heavy-duty diesel engine used in railways TAT M. E., Hosgor O. Energy , vol.270, 2023 (SCI-Expanded)
Anti-impact and vibration-damping design of cork-based sandwich structures for low-speed aerial vehicles Sheikhi M. R., GÜRGEN S., Altuntas O., SOFUOĞLU M. A. ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING , vol.23, no.2, 2023 (SCI-Expanded)
Monitoring the wear of turning tools with the electromechanical impedance technique ÇAKIR F. H., ER Ü., TEKKALMAZ M. JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES , vol.34, no.11, pp.1341-1352, 2023 (SCI-Expanded)
Guest editorial: The significance of clean and energy-efficient operations in sustainable aviation Karakoç T. H., ÇOLPAN C. Ö., YETİK Ö., DALKIRAN A. Aircraft Engineering and Aerospace Technology , vol.95, no.3, pp.365, 2023 (SCI-Expanded)
Failure analysis of an axle shaft in an airport ground support vehicle Diler A. A., Gürgen S., Sert A. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS , vol.237, no.4, pp.925-940, 2023 (SCI-Expanded)
Vibration Analysis and Optimization of a Tracked Armored Vehicle ZAFER N., Aybar U. Journal of Vibration Engineering and Technologies , vol.11, no.7, pp.3177-3184, 2023 (SCI-Expanded)
Thin-Walled Commercially Pure Titanium Structures: Laser Powder Bed Fusion Process Parameter Optimization Depboylu F. N., YASA E., Poyraz O., KORKUSUZ F. Machines , vol.11, no.2, 2023 (SCI-Expanded)
Effect of High-Chromium Ferrous-Based TiC Composite Coating on Microstructural and Corrosion Properties of Steels BUYTOZ S., Demiroeren H., KAYA E. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS , vol.76, no.8, pp.2201-2210, 2023 (SCI-Expanded)
Dynamic frictional contact mechanics between a functionally graded orthotropic medium and a moving flat punch BALCI M. N., ARSLAN O. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology , vol.237, no.1, pp.53-75, 2023 (SCI-Expanded)
Hertzian crack propagation in graded glass/ceramic composites Arslan O. Journal of the American Ceramic Society , vol.106, no.7, pp.4499-4514, 2023 (SCI-Expanded)
A squircle-shaped punch design for efficient contact performance of elastic materials ARSLAN O. Mechanics Based Design of Structures and Machines , vol.51, no.7, pp.4170-4182, 2023 (SCI-Expanded)
Numerical investigation of two-dimensional unsteady flow and heat transfer from rounded equilateral isothermal triangular cylinders in cross flow ÇELİK Z., ALTAÇ Z. Ocean Engineering , vol.269, 2023 (SCI-Expanded)
Material-specific phenomena and developing higher yield process parameters in laser powder bed fusion of 17-4 PH stainless steel YASA E., Atik İ., Kandemir İ. Journal of the Brazilian Society of Mechanical Sciences and Engineering , vol.45, no.1, 2023 (SCI-Expanded)
Energy efficiency and cost assessment of a residential site with a combined heat and power system optimized with cryptocurrency mining TAT M. E., Bestas E. H. Environmental Progress and Sustainable Energy , vol.42, no.6, 2023 (SCI-Expanded)
Investigation of microstructure and mechanical properties of SiC and FeCrC reinforced components fabricated with plasma wire arc additive manufacturing (P-WAAM) Bayar İ., ULUTAN M. Materials Science and Engineering A , vol.875, 2023 (SCI-Expanded)
Multiple Performance Optimization of a Single Stage Centrifugal Pump using an Intelligent System Approach ERGÜR H. S. Journal of Applied Fluid Mechanics , vol.15, no.4, pp.1269-1280, 2022 (SCI-Expanded)
Contact-Free Support Structures for the Direct Metal Laser Melting Process Celik A., Tekoglu E., YASA E., Sönmez M. Ş. MATERIALS , vol.15, no.11, 2022 (SCI-Expanded)
Tribological and mechanical behavior of AISI 316L lattice-supported structures produced by laser powder bed fusion YASA E., AY G. M., Türkseven A. International Journal of Advanced Manufacturing Technology , vol.118, no.5-6, pp.1733-1748, 2022 (SCI-Expanded)
Effect of infill pattern and ratio on the flexural and vibration damping characteristics of FDM printed PLA specimens Öteyaka M. Ö., Çakir F. H., Sofuoğlu M. A. Materials Today Communications , vol.33, 2022 (SCI-Expanded)
Investigation of the Effects of Cryogenic Treatment on the Friction and Wear Properties of 36CrB4 Boron Steel ER Ü., Bozkurt F. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , vol.47, no.12, pp.16209-16221, 2022 (SCI-Expanded)
Titanium based bone implants production using laser powder bed fusion technology Depboylu F. N., YASA E., Poyraz Ö., Minguella-Canela J., KORKUSUZ F., De los Santos López M. A. Journal of Materials Research and Technology , vol.17, pp.1408-1426, 2022 (SCI-Expanded)
Effects of CuO, TiO2 and graphite microparticles on the heat transfer properties of greases Gokdemir G., DÖNER N., SERT Z., Sen F., Ciddi K. Engineering Science and Technology, an International Journal , vol.30, 2022 (SCI-Expanded)
Tribomechanical and microstructural properties of cathodic arc-deposited ternary nitride coatings KAYA E., ULUTAN M. Ceramics International , vol.48, pp.21305-21316, 2022 (SCI-Expanded)
Lubricity assessment of ultra-low sulfur diesel fuel (ULSD), biodiesel, and their blends, in conjunction with pure hydrocarbons and biodiesel based compounds Tat M. E., Çelik O. N., Er Ü., Gaşan H., Ulutan M. International Journal of Engine Research , vol.23, no.2, pp.214-231, 2022 (SCI-Expanded)
Optimization of Tooth Support Geometrical Parameters for Laser Powder Bed Fusion Produced Overhang Parts Gulcan O., Gunaydin K., Celik A., YASA E. JOURNAL OF TESTING AND EVALUATION , vol.51, 2022 (SCI-Expanded)
Optimization of micromachining operation for particle reinforced UHMWPE composites GÜRGEN S., SOFUOĞLU M. A. ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING , vol.22, 2022 (SCI-Expanded)
3D laminar natural convection in a cubical enclosure with gradually changing partitions UĞURLUBİLEK N., SERT Z., Selimefendigil F., Öztop H. F. International Communications in Heat and Mass Transfer , vol.133, 2022 (SCI-Expanded)
Improving machining stability of AISI-4140 with magnetic field Sofuoglu M. A., Çakir F. H. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , vol.236, no.11, pp.6095-6102, 2022 (SCI-Expanded)
Effect of thickness and build direction on the mechanical behavior and microstructure of AISI 316L stainless steel produced by Laser Beam Powder Bed Fusion YASA E., Karasoglu M. Kovove Materialy , vol.60, no.1, pp.55-65, 2022 (SCI-Expanded)
Investigation of electromechanical impedance and residual stress relation for samples machined by hot ultrasonic-assisted turning SOFUOĞLU M. A., HAYDARLAR G., Kuşhan M. C., ORAK S., TEKKALMAZ M. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , vol.236, no.8, pp.4180-4193, 2022 (SCI-Expanded)
A study on lithium-ion battery thermal management system with Al2O3 nanofluids YETİK Ö., Karakoc T. H. International Journal of Energy Research , vol.46, no.8, pp.10930-10941, 2022 (SCI-Expanded)
Promising fuels and green energy technologies for aviation Karakoc T. H., ÇOLPAN C. Ö., Ekici S., YETİK Ö. INTERNATIONAL JOURNAL OF GREEN ENERGY , 2022 (SCI-Expanded)
Thermal and electrical analysis of batteries in electric aircraft using nanofluids Yetik Ö., Karakoç T. H. JOURNAL OF ENERGY STORAGE , vol.52, no.104853, pp.1-12, 2022 (SCI-Expanded)
A new approach to monitor wear tracks propagation on-site with electromechanical impedance technique Tekkalmaz M., Er Ü., Çakır F. H., Bozkurt F. Journal of Intelligent Material Systems and Structures , vol.33, no.2, pp.342-351, 2022 (SCI-Expanded)
Improvement of the Machinability of Ti–6Al–4V Alloy Wire Electro Discharge Machining with Cryogenic Treatment ÇAKIR F. H., ÇELİK O. N. Metals and Materials International , vol.27, no.9, pp.3529-3537, 2021 (SCI-Expanded)
A statistical analysis of temperature compensation for piezoelectric sensor bonded to AISI-1080 material TEKKALMAZ M., HAYDARLAR G., SOFUOĞLU M. A. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science , vol.235, no.20, pp.5093-5102, 2021 (SCI-Expanded)
Investigation of tribological and mechanical properties of biodegradable az91 alloy produced by cold chamber high pressure casting method URTEKIN L., ARSLAN R., BOZKURT F., ER Ü. Archives of Metallurgy and Materials , vol.66, no.1, pp.205-216, 2021 (SCI-Expanded)
Process damping model approach in milling operations ORAK S., Turkes E., Selvi S., Karabeyoglu S. S. Journal of the Brazilian Society of Mechanical Sciences and Engineering , vol.43, no.11, 2021 (SCI-Expanded)
Pulsed-mode Selective Laser Melting of 17-4 PH stainless steel: Effect of laser parameters on density and mechanical properties Ozsoy A., YASA E., Keles M., Tureyen E. B. Journal of Manufacturing Processes , vol.68, pp.910-922, 2021 (SCI-Expanded)
Estimation of thermal effect of different busbars materials on prismatic Li-ion batteries based on artificial neural networks YETİK Ö., Karakoc T. H. Journal of Energy Storage , vol.38, 2021 (SCI-Expanded)
Investigation of residual stresses by micro indentation in selective laser melting Lazerle metal toz ergitme prosesinde kalinti gerilmelerin mikro girinti tekniǧi ile incelenmesi YASA E., Poyraz Ö. Journal of the Faculty of Engineering and Architecture of Gazi University , vol.36, no.2, pp.1029-1039, 2021 (SCI-Expanded)
Microstructure and mechanical properties of hybrid additive manufactured dissimilar 17-4 PH and 316L stainless steels Ozsoy A., Tureyen E. B., Baskan M., YASA E. Materials Today Communications , vol.28, 2021 (SCI-Expanded)
A parametric investigation of surface defect turning process: a simulation study Sofuoğlu M. A. SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES , vol.46, no.4, 2021 (SCI-Expanded)
Anisotropic mechanical and tribological properties of SiAlON matrix composites containing different types of GNPs Baskut S., Sert A., Çelik O. N., Turan S. Journal of the European Ceramic Society , vol.41, no.3, pp.1878-1890, 2021 (SCI-Expanded)
Optical and Nanomechanical Properties of C Coated BN Thin Film Deposited by Thermionic Vacuum Arc Technique AY G. M., PAT S. ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY , vol.10, no.10, 2021 (SCI-Expanded)
The effect of refrigerant circuitry on the performance of a freezer with a tube-on-sheet evaporator Tosun T., Ozturk M. M., DOĞAN B., ERBAY L. B. Science and Technology for the Built Environment , vol.27, no.5, pp.557-566, 2021 (SCI-Expanded)
Improvement of tool life of a commercial drill bits by cryogenic treatment while machining widmanstatten Ti-6Al-4V SERT A., ÇAKIR F. H. SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES , vol.9, no.4, 2021 (SCI-Expanded)
A novel condenser with offset strip fins on a mini channel flat tube for reducing the energy consumption of a household refrigerator DOĞAN B., Ozturk M. M., Tosun T., Tosun M., ERBAY L. B. Journal of Building Engineering , vol.44, 2021 (SCI-Expanded)
A statistical analysis of temperature compensation for piezoelectric sensor bonded to AISI-1080 material TEKKALMAZ M., HAYDARLAR G., SOFUOĞLU M. A. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS, PART C: JOURNAL OF MECHANICAL ENGINEERING SCIENCE , vol.235, no.20, pp.5093-5102, 2021 (SCI-Expanded)
Enhancing wear resistance of AISI 304 alloy with shot peening and investigation of corrosion behaviour in marine water ÇAKIR F. H., ÖTEYAKA M. Ö., ER Ü., Bozkurt F. Transactions of the Institute of Metal Finishing , vol.99, pp.194-202, 2021 (SCI-Expanded)
Hybrid battery management system design for electric aircraft Tarhan B., Yetik Ö., Karakoç T. H. ENERGY , vol.234, 2021 (SCI-Expanded)
Computational modeling of a lithium-ion battery thermal management system with Al2O3-based nanofluids YETİK Ö., Yilmaz N., Karakoc T. H. International Journal of Energy Research , vol.45, pp.13851-13864, 2021 (SCI-Expanded)
Micro-machining of UHMWPE composites reinforced with carbide fillers Gürgen S., Sofuoğlu M. A. ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING , vol.21, no.4, 2021 (SCI-Expanded)
A new biomaterial selection approach using reference ideal method SOFUOĞLU M. A. Sadhana - Academy Proceedings in Engineering Sciences , vol.46, no.1, 2021 (SCI-Expanded)
An investigation on wear behavior of UHMWPE/carbide composites at elevated temperatures Gürgen S., Sert A., Kuşhan M. C. Journal of Applied Polymer Science , vol.138, no.16, 2021 (SCI-Expanded)
A new hybrid decision-making strategy of cutting fluid selection for manufacturing environment SOFUOĞLU M. A. Sadhana - Academy Proceedings in Engineering Sciences , vol.46, no.2, 2021 (SCI-Expanded)
Tribological assessment of NiCr, Al2O3/TiO2, and Cr3C2/NiCr coatings applied on a cylinder liner of a heavy-duty diesel engine Biyiklioglu O., Tat M. E. INTERNATIONAL JOURNAL OF ENGINE RESEARCH , vol.22, no.7, pp.2267-2280, 2021 (SCI-Expanded)
Thermal management system with nanofluids for hybrid electric aircraft battery Yetik O., Karakoc T. H. INTERNATIONAL JOURNAL OF ENERGY RESEARCH , vol.45, no.6, pp.8919-8931, 2021 (SCI-Expanded)
Smart polymer integrated cork composites for enhanced vibration damping properties Gürgen S., SOFUOĞLU M. A. COMPOSITE STRUCTURES , vol.258, 2021 (SCI-Expanded)
A new approach to monitoring the operational success of shot peening with electromechanical impedance technique TEKKALMAZ M., ER Ü., ÇAKIR F. H., Bozkurt F. International Journal of Advanced Manufacturing Technology , vol.117, pp.3503-3513, 2021 (SCI-Expanded)
Influence of Steel Fiber Addition on the Vibrational Characteristic of High Strength Cementitious Composites Sofuoğlu M. A., Çakır F. H., Celikten S. Arabian Journal for Science and Engineering , vol.46, no.5, pp.4677-4685, 2021 (SCI-Expanded)
Enhancement on the Tool Steel's Surface Properties by Eta Carbide Distribution Mechanism of Cryogenic Treatment KAYA E., KILIÇAY K., ULUTAN M. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS , vol.73, no.10, pp.2673-2682, 2020 (SCI-Expanded)
Tribological Properties of Cryo-Treated and Aged Ti6Al4V Alloy Çakır F. H., Çelik O. N. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS , vol.73, no.3, pp.799-809, 2020 (SCI-Expanded)
A numerical study on the thermal performance of prismatic li-ion batteries for hibrid electric aircraft YETİK Ö., Karakoc T. H. ENERGY , vol.195, 2020 (SCI-Expanded)
Microstructural and tribological properties of induction cladded NiCrBSi/WC composite coatings KILIÇAY K., BUYTOZ S., ULUTAN M. SURFACE & COATINGS TECHNOLOGY , vol.397, 2020 (SCI-Expanded)
Improvement of microstructural and tribological properties of APS carbide coatings via PTA surface melting KILIÇAY K., KAYA E. TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING , vol.98, no.3, pp.129-137, 2020 (SCI-Expanded)
Rheological modeling of multi-phase shear thickening fluid using an intelligent methodology Gürgen S., Sofuoğlu M. A., Kuşhan M. C. JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , vol.42, no.11, 2020 (SCI-Expanded)
Influence of shallow and deep cryogenic treatment on the corrosion behavior of Ti6Al4V alloy in isotonic solution ÖTEYAKA M. Ö., ÇAKIR F. H., ÇELİK O. N. MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION , vol.71, no.7, pp.1206-1215, 2020 (SCI-Expanded)
The effect of cutting tool material on chatter vibrations and statistical optimization in turning operations Gok F., ORAK S., SOFUOĞLU M. A. SOFT COMPUTING , vol.24, no.22, pp.17319-17331, 2020 (SCI-Expanded)
Fuzzy applications of Best-Worst method in manufacturing environment SOFUOĞLU M. A. SOFT COMPUTING , vol.24, no.1, pp.647-659, 2020 (SCI-Expanded)
Effects of Al on the Phase Volume Fractions and Wear Properties in the AlxCoCrFeMoNi High Entropy Alloy System Gaşan H., Lökçü E., Ozcan A., Çelik O. N., Çelikyürek İ., Ulutan M., et al. METALS AND MATERIALS INTERNATIONAL , vol.26, no.3, pp.310-320, 2020 (SCI-Expanded)
Integration of shear thickening fluid into cutting tools for improved turning operations GÜRGEN S., SOFUOĞLU M. A. JOURNAL OF MANUFACTURING PROCESSES , vol.56, pp.1146-1154, 2020 (SCI-Expanded)
FLOW AND FORCED HEAT TRANSFER FROM TANDEM SQUARE CYLINDERS NEAR A WALL YETİK Ö., MAHİR N. ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , vol.40, no.1, pp.99-112, 2020 (SCI-Expanded)
Flow structure around two tandem square cylinders close to a free surface YETİK Ö., MAHİR N. OCEAN ENGINEERING , vol.214, 2020 (SCI-Expanded)
Vibration attenuation of sandwich structures filled with shear thickening fluids GÜRGEN S., SOFUOĞLU M. A. COMPOSITES PART B-ENGINEERING , vol.186, 2020 (SCI-Expanded)
Thermal and electrical effects of basbars onLi-Ionbatteries YETİK Ö. INTERNATIONAL JOURNAL OF ENERGY RESEARCH , vol.44, no.11, pp.8480-8491, 2020 (SCI-Expanded)
Frictional contact problem of an anisotropic laterally graded layer loaded by a sliding rigid stamp ARSLAN O. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , vol.234, no.10, pp.2024-2041, 2020 (SCI-Expanded)
Hertz-type frictional contact problem of a bidirectionally graded half-plane indented by a sliding rounded punch ARSLAN O. MECHANICS OF MATERIALS , vol.149, 2020 (SCI-Expanded)
Influence of Cryogenic Treatment on Microstructure and Mechanical Properties of Ti6Al4V Alloy Çakır F. H., Çelik O. N. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE , vol.29, no.10, pp.6974-6984, 2020 (SCI-Expanded)
Plane contact problem between a rigid punch and a bidirectional functionally graded medium ARSLAN O. EUROPEAN JOURNAL OF MECHANICS A-SOLIDS , vol.80, 2020 (SCI-Expanded)
A comparative study of waste energy recovery from a hot-oil central boiler in a textile finishing factory Kavak H., Timuralp Ç., Doner N. ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , 2020 (SCI-Expanded)
TURBULENT NATURAL CONVECTION AND RADIATION HEAT TRANSFER IN SQUARE ISOTROPIC SCATTERING MEDIUM TEKKALMAZ M. ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , vol.40, no.2, pp.207-220, 2020 (SCI-Expanded)
Microstructure and Tribological Properties of Tool Steel AISI O2 After Thorough Cryogenic Heat Treatment KAYA E., KILIÇAY K., ULUTAN M. METAL SCIENCE AND HEAT TREATMENT , vol.62, pp.399-404, 2020 (SCI-Expanded)
Assessment of design constraints for the Duplex Stirling Refrigerator with imperfect regeneration Doğan B. JOURNAL OF CLEANER PRODUCTION , vol.265, 2020 (SCI-Expanded)
Performance assessment of an air source heat pump water heater from exergy aspect Mete Ozturk M., DOĞAN B., Berrin Erbay L. Sustainable Energy Technologies and Assessments , vol.42, 2020 (SCI-Expanded)
Development of protective MMC coating on TZM alloy for high temperature oxidation resistance by LPCS Kılıçay K. SURFACE & COATINGS TECHNOLOGY , vol.393, 2020 (SCI-Expanded)
Integration of a mini-channel condenser into a household refrigerator with regard to accurate capillary tube length and refrigerant amount Tosun M., DOĞAN B., Ozturk M. M., ERBAY L. B. INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID , vol.98, pp.428-435, 2019 (SCI-Expanded)
Mixed convection heat transfer from a triangular cylinder subjected to upward cross flow ALTAÇ Z., SERT Z., MAHİR N., TİMURALP Ç. INTERNATIONAL JOURNAL OF THERMAL SCIENCES , vol.137, pp.75-85, 2019 (SCI-Expanded)
Fatigue and corrosion behavior of in-service AA7075 aircraft component after thermo-mechanical and retrogression and re-aging treatments GÜRGEN S., Sackesen I., KUŞHAN M. C. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS , vol.233, no.9, pp.1764-1772, 2019 (SCI-Expanded)
Polishing operation of a steel bar in a shear thickening fluid medium GÜRGEN S., SERT A. COMPOSITES PART B-ENGINEERING , vol.175, 2019 (SCI-Expanded)
Inspection of nickel-based boron carbide PTA coatings on AISI 4140 steel Mehmet G. M., Çelik O. N. INDUSTRIAL LUBRICATION AND TRIBOLOGY , vol.71, no.4, pp.548-556, 2019 (SCI-Expanded)
Surface modification of atmospheric plasma sprayed cermet coatings by plasma transferred arc method BAYAR İ., ULUTAN M. TRANSACTIONS OF THE INSTITUTE OF METAL FINISHING , vol.97, no.6, pp.298-304, 2019 (SCI-Expanded)
Rheological compatibility of multi-phase shear thickening fluid with a phenomenological model GÜRGEN S., SOFUOĞLU M. A., KUŞHAN M. C. SMART MATERIALS AND STRUCTURES , vol.28, no.3, 2019 (SCI-Expanded)
Multi-criteria decision-making analysis of different non-traditional machining operations of Ti6Al4V GÜRGEN S., ÇAKIR F. H., SOFUOĞLU M. A., ORAK S., KUŞHAN M. C., Li H. SOFT COMPUTING , vol.23, no.13, pp.5259-5272, 2019 (SCI-Expanded)
Residual Stress-induced Distortions in Laser Powder Bed Additive Manufacturing of Nickel-based Superalloys Poyraz O., KUŞHAN M. C. STROJNISKI VESTNIK-JOURNAL OF MECHANICAL ENGINEERING , vol.65, no.6, pp.343-350, 2019 (SCI-Expanded)
An efficient approach by adjusting bounds for heuristic optimization algorithms SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S. SOFT COMPUTING , vol.23, no.13, pp.5199-5212, 2019 (SCI-Expanded)
Prediction of stable depth of cuts in turning and milling operations: a new probabilistic approach SOFUOĞLU M. A. JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , vol.41, no.5, 2019 (SCI-Expanded)
Tribological behavior of UHMWPE matrix composites reinforced with PTFE particles and aramid fibers GÜRGEN S., ÇELİK O. N., KUŞHAN M. C. COMPOSITES PART B-ENGINEERING , vol.173, 2019 (SCI-Expanded)
Surface topography of nickel-based superalloy manufactured with direct metal laser sintering (DMLS) method Solakoglu E. U., GÜRGEN S., KUŞHAN M. C. SURFACE TOPOGRAPHY-METROLOGY AND PROPERTIES , vol.7, no.1, 2019 (SCI-Expanded)
Numerical investigation of flow and combined natural-forced convection from an isothermal square cylinder in cross flow MAHİR N., ALTAÇ Z. INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW , vol.75, pp.103-121, 2019 (SCI-Expanded)
Characterization of the mechanism of cryogenic treatment on the microstructural changes in tungsten carbide cutting tools SERT A., ÇELİK O. N. MATERIALS CHARACTERIZATION , vol.150, pp.1-7, 2019 (SCI-Expanded)
Experimental investigation on vibration characteristics of shear thickening fluid filled CFRP tubes GÜRGEN S., SOFUOĞLU M. A. COMPOSITE STRUCTURES , vol.226, 2019 (SCI-Expanded)
Development of an ITARA-based hybrid multi-criteria decision-making model for material selection SOFUOĞLU M. A. SOFT COMPUTING , vol.23, no.15, pp.6715-6725, 2019 (SCI-Expanded)
Performance analysis of a compact heat exchanger with offset strip fin by non-uniform uninterrupted fin length Ozturk M. M., DOĞAN B., ERBAY L. B. APPLIED THERMAL ENGINEERING , vol.159, 2019 (SCI-Expanded)
Optimization of different non-traditional turning processes using soft computing methods SOFUOĞLU M. A., ÇAKIR F. H., KUŞHAN M. C., ORAK S. SOFT COMPUTING , vol.23, no.13, pp.5213-5231, 2019 (SCI-Expanded)
HEAT TRANSFER IN THREE-DIMENSIONAL RECTANGULAR CAVITIES WITH PINS SERT Z., TİMURALP Ç., TEKKALMAZ M. ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , vol.39, no.1, pp.39-49, 2019 (SCI-Expanded)
A COMPARATIVE ASSESSMENT OF TURBULENT FORCED CONVECTION HEAT TRANSFER FROM A SINGLE CYLINDER USING RANS AND LES MODELS ALTAÇ Z., MAHİR N. ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , vol.38, no.1, pp.11-24, 2018 (SCI-Expanded)
Effect of cryogenic treatment on the microstructure and the wear behavior of WC-Co end mills for machining of Ti6Al4V titanium alloy Çelik O. N., Sert A., Gaşan H., Ulutan M. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , vol.95, pp.2989-2999, 2018 (SCI-Expanded)
Development of an ANN-based decision-making method for determining optimum parameters in turning operation ORAK S., ARAPOĞLU R. A., SOFUOĞLU M. A. SOFT COMPUTING , vol.22, no.18, pp.6157-6170, 2018 (SCI-Expanded)
Numerical investigation of hot ultrasonic assisted turning of aviation alloys SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., ORAK S., KUŞHAN M. C. Journal of the Brazilian Society of Mechanical Sciences and Engineering , vol.40, no.3, 2018 (SCI-Expanded)
Experimental investigation of machining characteristics and chatter stability for Hastelloy-X with ultrasonic and hot turning SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., ORAK S., KUŞHAN M. C. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , vol.95, pp.83-97, 2018 (SCI-Expanded)
INCLINED SURFACE CRACKS IN A GRADED HALF-PLANE SUBJECTED TO FRICTIONAL SLIDING CONTACT ARSLAN O. JOURNAL OF THEORETICAL AND APPLIED MECHANICS , vol.56, no.4, pp.915-925, 2018 (SCI-Expanded)
Investigation of the effect of different process parameters for laser additive manufacturing of metals Poyraz O., KUŞHAN M. C. JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , vol.33, no.2, pp.699-711, 2018 (SCI-Expanded)
Effect of working fluid on the performance of the duplex Stirling refrigerator DOĞAN B., Ozturk M. M., ERBAY L. B. JOURNAL OF CLEANER PRODUCTION , vol.189, pp.98-107, 2018 (SCI-Expanded)
Contact mechanics problem between an orthotropic graded coating and a rigid punch of an arbitrary profile ARSLAN O., DAĞ S. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES , vol.135, pp.541-554, 2018 (SCI-Expanded)
Thermal and molten pool model in selective laser melting process of Inconel 625 Kundakcioglu E., Lazoglu I., Poyraz O., YASA E., Cizicioglu N. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , vol.95, pp.3977-3984, 2018 (SCI-Expanded)
Numerical Investigation of Flow and Heat Transfer Characteristics of Two Tandem Circular Cylinders of Different Diameters MAHİR N., ALTAÇ Z. HEAT TRANSFER ENGINEERING , vol.38, no.16, pp.1367-1381, 2017 (SCI-Expanded)
The effects of cryogenic treatment on the toughness and tribological behaviors of eutectoid steel ÇAKIR F. H., ÇELİK O. N. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , vol.31, no.7, pp.3233-3239, 2017 (SCI-Expanded)
An ANN-Based Method to Predict Surface Roughness in Turning Operations ARAPOĞLU R. A., SOFUOĞLU M. A., ORAK S. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , vol.42, no.5, pp.1929-1940, 2017 (SCI-Expanded)
Effect of Isothermal Bainitic Quenching on Rail Steel Impact Strength and Wear Resistance ÇAKIR F. H., ÇELİK O. N. METAL SCIENCE AND HEAT TREATMENT , vol.59, pp.289-293, 2017 (SCI-Expanded)
Shear thickening fluids in protective applications: A review GÜRGEN S., KUŞHAN M. C., Li W. PROGRESS IN POLYMER SCIENCE , vol.75, pp.48-72, 2017 (SCI-Expanded)
Three dimensional heat transfer from a square cylinder at low Reynolds numbers MAHİR N. INTERNATIONAL JOURNAL OF THERMAL SCIENCES , vol.119, pp.37-50, 2017 (SCI-Expanded)
Tribological and Mechanical Properties of Deep Cryogenically Treated Medium Carbon Micro Alloy Steel KAYA E., ULUTAN M. METALS AND MATERIALS INTERNATIONAL , vol.23, no.4, pp.691-698, 2017 (SCI-Expanded)
INVESTIGATION OF COMBINED HEAT TRANSFER AND LAMINAR FLUID FLOW IN TWO AND THREE DIMENSIONAL DUCTS WITH AN OPEN CAVITY TİMURALP Ç., ALTAÇ Z. ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , vol.37, no.2, pp.33-47, 2017 (SCI-Expanded)
Overall performance of the duplex Stirling refrigerator ERBAY L. B., Ozturk M. M., DOĞAN B. ENERGY CONVERSION AND MANAGEMENT , vol.133, pp.196-203, 2017 (SCI-Expanded)
Modelling of dynamic cutting force coefficients and chatter stability dependent on shear angle oscillation TÜRKEŞ E., ORAK S., NEŞELİ S., ŞAHİN M., SELVİ S. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , vol.91, pp.679-686, 2017 (SCI-Expanded)
Application of alternative synthetic kernel approximation to radiative transfer in regular and irregular two-dimensional media ALTAÇ Z., SERT Z. JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER , vol.187, pp.293-309, 2017 (SCI-Expanded)
Turkey ERBAY L. B. MOLTEN SALT REACTORS AND THORIUM ENERGY , pp.735-744, 2017 (SCI-Expanded)
Effect of cryogenic treatment on tribological behaviour of TiC composite coatings KILIÇAY K., ULUTAN M. SURFACE ENGINEERING , vol.33, no.12, pp.886-894, 2017 (SCI-Expanded)
Effect of heat treatment on the bending behavior of aluminum alloy tubes SERT A., GÜRGEN S., ÇELİK O. N., KUŞHAN M. C. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , vol.31, no.11, pp.5273-5278, 2017 (SCI-Expanded)
The effect of silicon carbide additives on the stab resistance of shear thickening fluid treated fabrics GÜRGEN S., KUŞHAN M. C. MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , vol.24, no.16, pp.1381-1390, 2017 (SCI-Expanded)
Oxidation and thermal shock behavior of thermal barrier coated 18/10CrNi alloy with coating modifications GÜRGEN S., Diltemiz S. F., KUŞHAN M. C. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , vol.31, no.1, pp.149-155, 2017 (SCI-Expanded)
The stab resistance of fabrics impregnated with shear thickening fluids including various particle size of additives GÜRGEN S., KUŞHAN M. C. COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING , vol.94, pp.50-60, 2017 (SCI-Expanded)
The ballistic performance of aramid based fabrics impregnated with multi-phase shear thickening fluids GÜRGEN S., KUŞHAN M. C. POLYMER TESTING , vol.64, pp.296-306, 2017 (SCI-Expanded)
Numerical Investigation of the Air-Side Thermal Hydraulic Performance of a Louvered-Fin and Flat-Tube Heat Exchanger at Low Reynolds Numbers ERBAY L. B., UĞURLUBİLEK N., ALTUN Ö., DOĞAN B. HEAT TRANSFER ENGINEERING , vol.38, no.6, pp.627-640, 2017 (SCI-Expanded)
Energy, exergy analysis, and sustainability assessment of different engine powers for helicopter engines Yildirim E., ALTUNTAŞ Ö., MAHİR N., KARAKOÇ T. H. INTERNATIONAL JOURNAL OF GREEN ENERGY , vol.14, no.13, pp.1093-1099, 2017 (SCI-Expanded)
Plasma transferred arc surface modification of atmospheric plasma sprayed ceramic coatings ULUTAN M., KILIÇAY K., KAYA E., BAYAR İ. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , vol.30, no.8, pp.3813-3818, 2016 (SCI-Expanded)
Nonlinear viscoelastic contact and deformation of freeform virtual surfaces Zafer N., Yılmaz S. ADVANCED ROBOTICS , vol.30, pp.246-257, 2016 (SCI-Expanded)
Microstructure and wear behaviour of plasma transferred arc (PTA)-deposited FeCrC composite coatings on AISI 5115 steel Ulutan M., KILIÇAY K., Celik O. N., ER Ü. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , vol.236, pp.26-34, 2016 (SCI-Expanded)
The rheology of shear thickening fluids with various ceramic particle additives GÜRGEN S., Li W., KUŞHAN M. C. MATERIALS & DESIGN , vol.104, pp.312-319, 2016 (SCI-Expanded)
Frictional Compliant Haptic Contact and Deformation of Soft Objects Zafer N., Yilmaz S. INTERNATIONAL JOURNAL OF ADVANCED ROBOTIC SYSTEMS , vol.13, 2016 (SCI-Expanded)
Modeling and analysis of the effects of nano-oil additives on wear properties of AISI 4140 steel material using mixture design BURUK ŞAHİN Y., ÇELİK O. N., Burnak N., AKTAR DEMİRTAŞ E. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY , vol.230, no.4, pp.442-451, 2016 (SCI-Expanded)
The effect of carbide particle additives on rheology of shear thickening fluids GÜRGEN S., KUŞHAN M. C., Li W. KOREA-AUSTRALIA RHEOLOGY JOURNAL , vol.28, no.2, pp.121-128, 2016 (SCI-Expanded)
Prediction of stable cutting depths in turning operation using soft computing methods SOFUOĞLU M. A., ORAK S. APPLIED SOFT COMPUTING , vol.38, pp.907-921, 2016 (SCI-Expanded)
Assessment of turbulence models in natural convection from two- and three-dimensional rectangular enclosures ALTAÇ Z., UĞURLUBİLEK N. INTERNATIONAL JOURNAL OF THERMAL SCIENCES , vol.107, pp.237-246, 2016 (SCI-Expanded)
Investigation of the solid lubrication effect of commercial boron-based compounds in end milling KILIÇAY K., Ulutan M. INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING , vol.17, no.4, pp.517-524, 2016 (SCI-Expanded)
Effect of plastic media blasting method on mechanical properties of Al 2024-T6 alloy Uner U., ORAK S., SOFUOĞLU M. A. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY , vol.30, no.10, pp.4559-4564, 2016 (SCI-Expanded)
A hybrid decision making approach to prevent chatter vibrations SOFUOĞLU M. A., ORAK S. APPLIED SOFT COMPUTING , vol.37, pp.180-195, 2015 (SCI-Expanded)
Haptic exploration of highly curved compliant surfaces Zafer N., Yilmaz S. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART I-JOURNAL OF SYSTEMS AND CONTROL ENGINEERING , vol.229, no.10, pp.949-956, 2015 (SCI-Expanded)
HEAT TRANSFER ANALYSIS IN THE TBC COATED EXHAUST NOZZLE OF GAS TURBINES ALTUN Ö. HEAT TRANSFER RESEARCH , vol.46, no.1, pp.13-29, 2015 (SCI-Expanded)
An experimental comparison of two multi-louvered fin heat exchangers with different numbers of fin rows DOĞAN B., ALTUN Ö., UĞURLUBİLEK N., Tosun M., Saricay T., ERBAY L. B. APPLIED THERMAL ENGINEERING , vol.91, pp.270-278, 2015 (SCI-Expanded)
Estimation of cutting speed in abrasive water jet using an adaptive wavelet neural network ERGÜR H. S., OYSAL Y. JOURNAL OF INTELLIGENT MANUFACTURING , vol.26, no.2, pp.403-413, 2015 (SCI-Expanded)
Wear behavior of SiC-reinforced surface composite Al7075-T651 aluminum alloy produced using friction stir processing SERT A., ÇELİK Ö. Indian Journal of Engineering and Materials Sciences , vol.21, no.1, pp.35-43, 2014 (SCI-Expanded)
Hydrodynamically and thermally developing laminar flow in spiral coil tubes ALTAÇ Z., ALTUN Ö. INTERNATIONAL JOURNAL OF THERMAL SCIENCES , vol.77, pp.96-107, 2014 (SCI-Expanded)
Advanced exergoenvironmental assessment of a natural gas-fired electricity generating facility AÇIKKALP E., ARAS H., HEPBAŞLI A. ENERGY CONVERSION AND MANAGEMENT , vol.81, pp.112-119, 2014 (SCI-Expanded)
Advanced exergy analysis of a trigeneration system with a diesel-gas engine operating in a refrigerator plant building AÇIKKALP E., ARAS H., HEPBAŞLI A. ENERGY AND BUILDINGS , vol.80, pp.268-275, 2014 (SCI-Expanded)
Advanced exergoeconomic analysis of an electricity-generating facility that operates with natural gas AÇIKKALP E., ARAS H., HEPBAŞLI A. ENERGY CONVERSION AND MANAGEMENT , vol.78, pp.452-460, 2014 (SCI-Expanded)
Advanced exergoeconomic analysis of a trigeneration system using a diesel-gas engine AÇIKKALP E., ARAS H., HEPBAŞLI A. APPLIED THERMAL ENGINEERING , vol.67, pp.388-395, 2014 (SCI-Expanded)
Radiative transfer in absorbing, emitting and isotropically scattering segregated two-layered, 3D rectangular enclosures ALTAÇ Z., TEKKALMAZ M. JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER , vol.133, pp.570-578, 2014 (SCI-Expanded)
ANN Modeling of an ORC-Binary Geothermal Power Plant: Simav Case Study Arslan O., Yetik Ö. ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , vol.36, no.4, pp.418-428, 2014 (SCI-Expanded)
Advanced exergy analysis of an electricity-generating facility using natural gas AÇIKKALP E., ARAS H., HEPBAŞLI A. ENERGY CONVERSION AND MANAGEMENT , vol.82, pp.146-153, 2014 (SCI-Expanded)
Nodal synthetic kernel (N-SKN) method for solving neutron transport equation in one- and two-dimensional X-Y geometries ALTAÇ Z., TEKKALMAZ M. ANNALS OF NUCLEAR ENERGY , vol.64, pp.320-332, 2014 (SCI-Expanded)
Wear behavior of SiC-reinforced surface composite A17075-T651 aluminum alloy produced using friction stir processing SERT A., ÇELİK O. N. INDIAN JOURNAL OF ENGINEERING AND MATERIALS SCIENCES , vol.21, no.1, pp.35-43, 2014 (SCI-Expanded)
On radiative transfer using synthetic kernel and simplified spherical harmonics methods in linearly anisotropically scattering media ALTAÇ Z. JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER , vol.147, pp.8-23, 2014 (SCI-Expanded)
THERMOHYDRAULIC ANALYSIS OF CONCENTRIC ANNULAR TUBE HAVING NARROW GAP UĞURLUBİLEK N., Uralcan İ. Y. ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , vol.33, no.2, pp.143-155, 2013 (SCI-Expanded)
EXPERIMENTAL INVESTIGATION OF THE PERFORMANCE OF A DIRECT EXPANSION SOLAR ASSISTED HEAT PUMP WATER HEATER WITH ROLLBOND EVAPORATOR Mutlu Cerit E., ERBAY L. B. ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , vol.33, no.1, pp.119-126, 2013 (SCI-Expanded)
Thermal Spray Coatings for Aeronautical and Aerospace Applications Li C., Yang G., ALTUN Ö. AEROSPACE MATERIALS HANDBOOK , pp.281-358, 2013 (SCI-Expanded)
Inspection of friction and wear properties of railway rails Ay G. M., Çelik O. N. ENGINEERING SCIENCE AND TECHNOLOGY-AN INTERNATIONAL JOURNAL-JESTECH , vol.16, no.2, pp.89-95, 2013 (SCI-Expanded)
Effect of Nano Hexagonal Boron Nitride Lubricant Additives on the Friction and Wear Properties of AISI 4140 Steel ÇELİK O. N., Ay N., GÖNCÜ Y. PARTICULATE SCIENCE AND TECHNOLOGY , vol.31, no.5, pp.501-506, 2013 (SCI-Expanded)
Particle Size Distribution and Shape Characterization of the Chips Produced During Granite Machining in Relation to Process Forces and Specific Energy YILMAZ N., Goktan R. M., GAŞAN H., ÇELİK O. N. PARTICULATE SCIENCE AND TECHNOLOGY , vol.31, no.3, pp.277-286, 2013 (SCI-Expanded)
Wear Characteristics of Traditional Manganese Phosphate and Composite hBN Coatings AY N., ÇELİK O. N., GÖNCÜ Y. TRIBOLOGY TRANSACTIONS , vol.56, no.6, pp.1109-1118, 2013 (SCI-Expanded)
HEAT TRANSFER ANALYSIS OF THERMAL BARRIER COATINGS ON A METAL SUBSTRATE ALTUN Ö., Böke Y. E. ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , vol.33, no.2, pp.101-109, 2013 (SCI-Expanded)
Investigation of the effect of rollbond evaporator design on the performance of direct expansion heat pump experimentally Cerit E., ERBAY L. B. ENERGY CONVERSION AND MANAGEMENT , vol.72, pp.163-170, 2013 (SCI-Expanded)
Microstructural and Wear Characteristics of High Velocity Oxygen Fuel (HVOF) Sprayed NiCrBSi-SiC Composite Coating on SAE 1030 Steel BUYTOZ S., ULUTAN M., ISLAK S., Kurt B., ÇELİK O. N. ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING , vol.38, no.6, pp.1481-1491, 2013 (SCI-Expanded)
Nodal synthetic kernel (N-SKN) method for solving radiative heat transfer problems in one- and two-dimensional participating medium with isotropic scattering ALTAÇ Z., TEKKALMAZ M. JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER , vol.129, pp.214-235, 2013 (SCI-Expanded)
NUMERICAL INVESTIGATION OF HEAT TRANSFER AND FLOW IN A TWISTED-SHAPED SQUARE DUCT UĞURLUBİLEK N. ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , vol.32, no.2, pp.121-131, 2012 (SCI-Expanded)
Electron beam welding varestraint test of ALLVAC 718 Plus™ for aviation technology Uzgur S., Li H., Cemal Kushan M. C., Yan M., Uzunonat Y., Diltemiz F. Advanced Science Letters , vol.13, pp.831-832, 2012 (SCI-Expanded)
A study on a symbiotic thorium breeding fuel-cycle: THORIMS-NES through FUJI Furukawa K., ERBAY L. B., Aykol A. ENERGY CONVERSION AND MANAGEMENT , vol.63, pp.51-54, 2012 (SCI-Expanded)
Decomposition of process damping ratios and verification of process damping model for chatter vibration Turkes E., ORAK S., NEŞELİ S., YALDIZ S. MEASUREMENT , vol.45, no.6, pp.1380-1386, 2012 (SCI-Expanded)
Effect of V, Nb, Ti and graphite additions on the hydrogen desorption temperature of magnesium hydride GAŞAN H., ÇELİK O. N., Aydinbeyli N., Yaman Y. M. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , vol.37, no.2, pp.1912-1918, 2012 (SCI-Expanded)
AN EXPERIMENTAL ANALYSIS OF AIR SOURCE HEAT PUMP WATER HEATER Ozturk M. M., Erbay L. B. ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , vol.32, no.1, pp.117-127, 2012 (SCI-Expanded)
Laminar natural convection heat transfer and air flow in three-dimensional rectangular enclosures with pin arrays attached to hot wall Bocu Z., ALTAÇ Z. APPLIED THERMAL ENGINEERING , vol.31, no.16, pp.3189-3195, 2011 (SCI-Expanded)
ANN based optimization of supercritical ORC-Binary geothermal power plant: Simav case study Arslan O., Yetik Ö. APPLIED THERMAL ENGINEERING , vol.31, pp.3922-3928, 2011 (SCI-Expanded)
Microstructure and Wear Behavior of TIG Surface-Alloyed AISI 4140 Steel ULUTAN M., YILDIRIM M. M., BUYTOZ S., ÇELİK O. N. TRIBOLOGY TRANSACTIONS , vol.54, no.1, pp.67-79, 2011 (SCI-Expanded)
Linear analysis of chatter vibration and stability for orthogonal cutting in turning Turkes E., ORAK S., NEŞELİ S., YALDIZ S. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS , vol.29, no.2, pp.163-169, 2011 (SCI-Expanded)
Cetane number effect on the energetic and exergetic efficiency of a diesel engine fuelled with biodiesel Tat M. E. FUEL PROCESSING TECHNOLOGY , vol.92, pp.1311-1321, 2011 (SCI-Expanded)
A new process damping model for chatter vibration Turkes E., ORAK S., NEŞELİ S., YALDIZ S. MEASUREMENT , vol.44, no.8, pp.1342-1348, 2011 (SCI-Expanded)
NUMERICAL MODELING OF THERMAL CONDUCTIVITY OF AIR-PLASMA-SPRAYED ZIRCONIA WITH DIFFERENT POROSITY LEVELS ALTUN Ö., Böke Y. E., Alanyali S. ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , vol.31, no.1, pp.77-84, 2011 (SCI-Expanded)
Exact Solution of Radiative Transfer Equation for Three-Dimensional Rectangular, Linearly Scattering Medium ALTAÇ Z., TEKKALMAZ M. JOURNAL OF THERMOPHYSICS AND HEAT TRANSFER , vol.25, no.2, pp.228-238, 2011 (SCI-Expanded)
Effects of graphite content on the microstructure and wear properties of an AISI 8620 steel surface modified by tungsten inert gas (TIC) ÇELİK O. N., ULUTAN M., GAŞAN H., ER Ü., BUYTOZ S. SURFACE & COATINGS TECHNOLOGY , vol.206, no.6, pp.1423-1429, 2011 (SCI-Expanded)
Effect of Different Surface Treatment Methods on the Friction and Wear Behavior of AISI 4140 Steel ULUTAN M., ÇELİK O. N., GAŞAN H., ER Ü. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY , vol.26, no.3, pp.251-257, 2010 (SCI-Expanded)
Tribological Properties of Borided AISI 4140 Steel with the Powder Pack-Boriding Method ULUTAN M., YILDIRIM M. M., ÇELİK O. N., BUYTOZ S. TRIBOLOGY LETTERS , vol.38, no.3, pp.231-239, 2010 (SCI-Expanded)
Thermodynamic and thermoeconomic analyses of a trigeneration (TRIGEN) system with a gas-diesel engine: Part II - An application Balli O., ARAS H., Hepbasli A. ENERGY CONVERSION AND MANAGEMENT , vol.51, no.11, pp.2260-2271, 2010 (SCI-Expanded)
Exergy analysis of engines fuelled with biodiesel from high oleic soybeans based on experimental values ÇALIŞKAN H., TAT M. E., Hepbasli A., Van Gerpen J. H. INTERNATIONAL JOURNAL OF EXERGY , vol.7, no.1, pp.20-36, 2010 (SCI-Expanded)
Thermodynamic and thermoeconomic analyses of a trigeneration (TRIGEN) system with a gas-diesel engine: Part I - Methodology Balli O., ARAS H., Hepbasli A. ENERGY CONVERSION AND MANAGEMENT , vol.51, no.11, pp.2252-2259, 2010 (SCI-Expanded)
A review on exergetic analysis and assessment of various types of engines Çalışkan H., Tat M. E., Hepbasli A. INTERNATIONAL JOURNAL OF EXERGY , vol.7, pp.287-310, 2010 (SCI-Expanded)
Interfacial Microstructure of Diffusion Bonded Inconel 738 and Ferritic Stainless Steel Couple Kurt B., ULUTAN M. JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY , vol.25, no.4, pp.527-530, 2009 (SCI-Expanded)
NATURAL CONVECTION HEAT TRANSFER FROM A THIN HORIZONTAL ISOTHERMAL PLATE IN AIR-FILLED RECTANGULAR ENCLOSURES ALTAÇ Z., Konrat S. ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , vol.29, no.1, pp.55-65, 2009 (SCI-Expanded)
The dependence of the hydrogen desorption temperature of MgH2 on its structural and morphological characteristics GAŞAN H., Aydinbeyli N., ÇELİK O. N., Yaman Y. M. JOURNAL OF ALLOYS AND COMPOUNDS , vol.487, pp.724-729, 2009 (SCI-Expanded)
A high-oleic-acid and low-palmitic-acid soybean: agronomic performance and evaluation as a feedstock for biodiesel Graef G., LaVallee B. J., Tenopir P., Tat M. E., Schweiger B., Kinney A. J., et al. PLANT BIOTECHNOLOGY JOURNAL , vol.7, no.5, pp.411-421, 2009 (SCI-Expanded)
Performance assessment of an internal combustion engine at varying dead (reference) state temperatures ÇALIŞKAN H., TAT M. E., Hepbasli A. APPLIED THERMAL ENGINEERING , vol.29, no.16, pp.3431-3436, 2009 (SCI-Expanded)
Effect of dent geometry on fatigue life of aircraft structural cylinder part Diltemiz S. F., Uzunonat Y., Kushan M. C., ÇELİK O. N. ENGINEERING FAILURE ANALYSIS , vol.16, no.4, pp.1203-1207, 2009 (SCI-Expanded)
Numerical assessment of thermohydraulic performance of a deep freeze evaporator Saricay T., ERBAY L. B. ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , vol.28, no.1, pp.33-41, 2008 (SCI-Expanded)
Numerical investigation of convective heat transfer in unsteady flow past two cylinders in tandem arrangements MAHİR N., ALTAÇ Z. INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW , vol.29, no.5, pp.1309-1318, 2008 (SCI-Expanded)
A road map for the realization of global-scale thorium breeding fuel cycle by single molten-fluoride flow Furukawa K., Arakawa K., ERBAY L. B., Ito Y., Kato Y., Kiyavitskaya H., et al. ENERGY CONVERSION AND MANAGEMENT , vol.49, no.7, pp.1832-1848, 2008 (SCI-Expanded)
Exergetic and exergoeconomic analysis of an Aircraft Jet Engine (AJE) Balli O., ARAS H., ARAS N., Hepbasli A. INTERNATIONAL JOURNAL OF EXERGY , vol.5, pp.567-581, 2008 (SCI-Expanded)
Benchmark solutions of radiative transfer equation for three-dimensional rectangular homogeneous media ALTAÇ Z., TEKKALMAZ M. JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER , vol.109, no.4, pp.587-607, 2008 (SCI-Expanded)
Exergoeconomic analysis of a combined heat and power (CHP) system Balli O., ARAS H., Hepbasli A. INTERNATIONAL JOURNAL OF ENERGY RESEARCH , vol.32, no.4, pp.273-289, 2008 (SCI-Expanded)
Exergoeconomic analysis of a combined heat and power system with the micro gas turbine (MGTCHP) ARAS H., Balli O. ENERGY EXPLORATION & EXPLOITATION , vol.26, no.1, pp.53-70, 2008 (SCI-Expanded)
Application of Synthetic Kernel (SKN) method to participating linearly anisotropically scattering solid spherical medium TEKKALMAZ M., ALTAÇ Z. JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER , vol.109, no.2, pp.210-219, 2008 (SCI-Expanded)
Exergetic performance evaluation of a combined heat and power (CHP) system in Turkey Balli O., ARAS H., Hepbasli A. INTERNATIONAL JOURNAL OF ENERGY RESEARCH , vol.31, no.9, pp.849-866, 2007 (SCI-Expanded)
Solution of radiative transfer problems in participating, linearly anisotropically scattering hollow spherical medium with Sk(n) method TEKKALMAZ M., ALTAÇ Z. ISI BILIMI VE TEKNIGI DERGISI-JOURNAL OF THERMAL SCIENCE AND TECHNOLOGY , vol.27, no.1, pp.23-38, 2007 (SCI-Expanded)
Exhaust emissions from an engine fueled with biodiesel from high-oleic soybeans Tat M. E., Wang P. S., Van Gerpen J. H., Clemente T. E. JOURNAL OF THE AMERICAN OIL CHEMISTS SOCIETY , vol.84, pp.865-869, 2007 (SCI-Expanded)
Natural convection in tilted rectangular enclosures with a vertically situated hot plate inside ALTAÇ Z., Kurtul O. APPLIED THERMAL ENGINEERING , vol.27, pp.1832-1840, 2007 (SCI-Expanded)
Estimating and statistically analyzing the global solar radiation potential over big cities in Turkey Balli O., ARAS H., ARAS N., Hepbasli A. ENERGY EXPLORATION & EXPLOITATION , vol.25, no.4, pp.301-311, 2007 (SCI-Expanded)
Energetic and exergetic performance evaluation of a combined heat and power system with the micro gas turbine (MGTCHP) Balli O., ARAS H. INTERNATIONAL JOURNAL OF ENERGY RESEARCH , vol.31, no.14, pp.1425-1440, 2007 (SCI-Expanded)
Determination of optimum insulation thicknesses of the external walls and roof (ceiling) for Turkey's different degree-day regions Sisman N., Kahya E., Aras N., ARAS H. ENERGY POLICY , vol.35, no.10, pp.5151-5155, 2007 (SCI-Expanded)
Energetic analyses of the combined heat and power (CHP) system Balli O., ARAS H. ENERGY EXPLORATION & EXPLOITATION , vol.25, no.1, pp.39-62, 2007 (SCI-Expanded)
Exact series expansions, recurrence relations, properties and integrals of the generalized exponential integral functions ALTAÇ Z. JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER , vol.104, no.3, pp.310-325, 2007 (SCI-Expanded)
FLOW EXERGY DESTRUCTION IN DUCTS Erbay L. B. Journal Of Thermal Science And Technology , vol.27, no.2, pp.1-6, 2007 (SCI-Expanded)
Wear of plowshare components in SAE 950C steel surface hardened by powder boriding ER Ü., Par B. WEAR , vol.261, pp.251-255, 2006 (SCI-Expanded)
Global solar radiation potential, part 1: Model development ARAS H., Balli O., Hepbasli A. ENERGY SOURCES PART B-ECONOMICS PLANNING AND POLICY , vol.1, no.3, pp.303-315, 2006 (SCI-Expanded)
Global solar radiation potential, part 2: Statistical analysis ARAS H., Balli O., Hepbasli A. ENERGY SOURCES PART B-ECONOMICS PLANNING AND POLICY , vol.1, no.3, pp.317-326, 2006 (SCI-Expanded)
Evaluation of alternative fuels for residential heating in Turkey using analytic network process (ANP) with group decision-making Erdogmus S., ARAS H., Koc E. RENEWABLE & SUSTAINABLE ENERGY REVIEWS , vol.10, no.3, pp.269-279, 2006 (SCI-Expanded)
Estimating the horizontal diffuse solar radiation over the Central Anatolia Region of Turkey ARAS H., Balli O., Hepbasli A. ENERGY CONVERSION AND MANAGEMENT , vol.47, pp.2240-2249, 2006 (SCI-Expanded)
Forecasting residential natural gas demand ARAS H., Aras N. ENERGY SOURCES , vol.26, no.5, pp.463-472, 2004 (SCI-Expanded)
Solution of the radiative integral transfer equations in rectangular absorbing, emitting, and anisotropically scattering homogeneous medium ALTAÇ Z., Tekkalmaz M. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME , vol.126, no.1, pp.137-140, 2004 (SCI-Expanded)
Entropy generation in a square enclosure with partial heating from a vertical lateral wall Erbay L. B., ALTAÇ Z., Sulus B. HEAT AND MASS TRANSFER , vol.40, no.12, pp.909-918, 2004 (SCI-Expanded)
Solution of the radiative integral transfer equations in rectangular participating and isotropically scattering inhomogeneous medium ALTAÇ Z., Tekkalmaz M. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , vol.47, no.1, pp.101-109, 2004 (SCI-Expanded)
Multi-criteria selection for a wind observation station location using analytic hierarchy process ARAS H., Erdogmus S., Koc E. RENEWABLE ENERGY , vol.29, no.8, pp.1383-1392, 2004 (SCI-Expanded)
Radiative transfer in one-dimensional hollow sphere with anisotropic scattering and variable medium properties ALTAÇ Z., Tekkalmaz M. JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER , vol.83, no.1, pp.115-117, 2004 (SCI-Expanded)
Condition and development of the cogeneration facilities based on autoproduction investment model in Turkey ARAS H. RENEWABLE & SUSTAINABLE ENERGY REVIEWS , vol.7, no.6, pp.553-559, 2003 (SCI-Expanded)
Radiative transfer in absorbing, emitting and linearly anisotropic-scattering inhomogeneous cylindrical medium ALTAÇ Z. JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER , vol.77, no.2, pp.177-192, 2003 (SCI-Expanded)
The synthetic kernel (SKN) method applied to thermal radiative transfer in absorbing, emitting, and isotropically scattering homogeneous and inhomogeneous solid spherical medium ALTAÇ Z., Tekkalmaz M. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME , vol.125, no.4, pp.739-746, 2003 (SCI-Expanded)
Entropy generation during fluid flow between two parallel plates with moving bottom plate ERBAY L. B., Ercan M. Ş., SÜLÜŞ B., Yalçin M. M. Entropy , vol.5, pp.506-518, 2003 (SCI-Expanded)
An analysis of the entropy generation in a square enclosure ERBAY L. B., ALTAÇ Z., Sülüş B. Entropy , vol.5, pp.496-505, 2003 (SCI-Expanded)
Wind energy status and its assessment in Turkey ARAS H. RENEWABLE ENERGY , vol.28, no.14, pp.2213-2220, 2003 (SCI-Expanded)
A technical note on "Modeling of gas demand using degree-day concept: Case study for Ankara" ARAS H. ENERGY SOURCES , vol.24, no.7, pp.611-612, 2002 (SCI-Expanded)
The SKN approximation for solving radiative transfer problems in absorbing, emitting, and isotropically scattering plane-parallel medium: Part 1 ALTAÇ Z. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME , vol.124, no.4, pp.674-684, 2002 (SCI-Expanded)
The SKN approximation for solving radiative transfer problems in absorbing, emitting, and linearly anisotropically scattering plane-parallel medium: Part 2 ALTAÇ Z. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME , vol.124, no.4, pp.685-695, 2002 (SCI-Expanded)
The SKN approximation for solving radiation transport problems in absorbing, emitting, and scattering rectangular geometries ALTAÇ Z., Tekkalmaz M. JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER , vol.73, pp.219-230, 2002 (SCI-Expanded)
Radiative transfer in one-dimensional hollow cylindrical geometry with anisotropic scattering and variable medium properties ALTAÇ Z. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER , vol.45, no.26, pp.5239-5242, 2002 (SCI-Expanded)
Articles Published in Other Journals
Tribological and Mechanical Performance Evaluation of Hybrid Reinforced Copper Composites Kaya E., Tokat Birgin P. Ç. Journal of scientific reports-A (Online) , vol.2024, no.057, pp.51-67, 2024 (Peer-Reviewed Journal)
Mechanical properties of laser powder bed fusion produced overhang parts with different support geometries: an experimental study Gülcan O., Günaydın K., Çelik A., YASA E. Progress in Additive Manufacturing , vol.9, no.2, pp.211-229, 2024 (ESCI)
DETERMINATION OF CARBON EMISSIONS FROM AIRPLANES FOR ESKISEHIR HASAN POLATKAN AIRPORT TİMURALP Ç., MERCAN F. R. Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online) , vol.32, no.2, pp.1335-1342, 2024 (Peer-Reviewed Journal)
INVESTIGATION OF THE EFFECT OF WELDING WIRE ON THE TRIBOLOGICAL PROPERTIES OF AISI 1050 STEEL REPAIRED BY MIG AND ARC WELDING KILIÇAY K., ERGENE M. Ç., DAYI S. C. Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online) , vol.32, no.2, pp.1279-1289, 2024 (Peer-Reviewed Journal)
Ağır Ticari Araçlarda Dizel Yerine Sıvılaştırılmış Doğal Gaz Kullanımının Yakıt Tüketimine Etkisi Doğan B. Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online) , vol.32, no.1, pp.1204-1214, 2024 (Peer-Reviewed Journal)
Dolgu Desenlerinin ve Oranlarının Ergiyik Biriktirme Modellemede PLA Malzemesinin Mekanik Performansına Olan Etkisi Kaya E., Bayar İ., Akpınar A. F. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi , vol.13, no.3, pp.1-7, 2024 (Peer-Reviewed Journal)
INVESTIGATION OF THE EFFECT OF CRYOGENIC HEAT TREATMENT ON EXPERIMENTAL DYNAMIC TOUGHNESS IN Ti6Al4V ALLOYS ÇİMEN C., KILIÇAY K., Kaya E. Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online) , vol.32, no.1, pp.1215-1220, 2024 (Peer-Reviewed Journal)
DETERMİNATİON AND EVALUATİON OF CO2 EMİSSİONS FROM FUEL CONSUMPTİON IN ROAD TRANSPORTATİON IN ESKİSEHİR ACCORDİNG TO TİER 1 METHOD TİMURALP Ç. Mühendis ve Makina , vol.64, no.711, pp.195-210, 2023 (Peer-Reviewed Journal)
A numerical study of thermal management of lithium-ion battery with nanofluid Yetik Ö., Moralı U., Karakoç T. H. ENERGY , vol.284, pp.129295, 2023 (Peer-Reviewed Journal)
Nano WC Kompozitlerde Fe-Ni Oranın Mikroyapı ve Mekanik Özelliklere Etkisi KAYA E., ULUTAN M. Mühendislik Bilimleri ve Tasarım Dergisi , vol.11, no.1, pp.376-393, 2023 (Peer-Reviewed Journal)
Recent Inventions in Additive Manufacturing: Holistic Review Fidan I., Huseynov O., Ali M. A., Alkunte S., Rajeshirke M., Gupta A., et al. Inventions , vol.8, no.4, 2023 (ESCI)
The Investigation of Production Parameters and Their Effect on the Tribomechanical Properties of the Compression Molded Polymeric Bearing Materials KAYA E. Journal of Materials and Mechatronics:A (Online) , vol.1, no.1, pp.38-49, 2023 (Peer-Reviewed Journal)
Wire Arc Additive Manufacturing (WAAM) Method and Investigation of Mechanical Properties for Different Materials ÇAKIR E., Ulutan M. Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi , vol.10, no.1, pp.217-235, 2023 (Peer-Reviewed Journal)
Diagnosing Engine Oil Fuel Dilution by Viscosity Measurement in Heavy-Duty Diesel Engines Used in Railways TAT M. E., DORU E. Demiryolu Mühendisliği , no.18, pp.26-35, 2023 (Peer-Reviewed Journal)
Experimental investigation and optimization of hybrid turning of Ti6Al7Nb alloy under nanofluid based MQL by TOPSIS method DUMAN E., YAPAN Y. F., SOFUOĞLU M. A. Journal of Advances in Manufacturing Engineering , vol.4, no.2, pp.35-45, 2023 (Peer-Reviewed Journal)
NUMERICAL INVESTIGATION ON THERMAL PERFORMANCE OF A HEAT SINK AT LOW REYNOLDS NUMBERS Koşdere Ö., Altun Ö., Sert Z. INTERNATIONAL REFEREED JOURNAL OF ENGINEERING AND SCIENCES , no.21, pp.50-63, 2023 (Peer-Reviewed Journal)
The Effects of Different Heat Treatment and Coating Techniques on X120CrMo29-2 Martensitic Stainless Steel KAYA E., ULUTAN M., Akbulut A. Journal of Scientific Reports-A , vol.49, no.2, pp.62-73, 2022 (Peer-Reviewed Journal)
Electrical Characteristics of Cadmium Sulfide/4-Amino-2-Methyl-Quinoline Heterojunction Structure Demir R., Kaya E., Kaya I., Ulutan M. Celal Bayar Üniversitesi Fen Bilimleri Dergisi , vol.18, no.2, pp.23-28, 2022 (Peer-Reviewed Journal)
EŞ MERKEZLİ İÇ İÇE BORULU ISI DEĞİŞTİRİCİSİNDE ISI TRANSFERİ İYİLEŞTİRME YÖNTEMLERİNİN SAYISAL ANALİZİ ALTUN Ö., Karaca E. Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online) , vol.30, no.1, pp.96-105, 2022 (Peer-Reviewed Journal)
Modelling of Turkey’s energy consumption using Artificial Neural Networks Şişman N., SOFUOĞLU M. A., ARAS N., ARAS H. Advanced Engineering Forum , 2022 (Peer-Reviewed Journal)
The evaluation Of The Non-Toxic Ferrous Matrix Based WC Reinforced Composites: A Review KAYA E., ULUTAN M. Celal Bayar Üniversitesi Fen Bilimleri Dergisi , vol.18, no.2, pp.129-139, 2022 (Peer-Reviewed Journal)
The Effect of Graphite Particles as Lubricant Additive on the Friction and Wear Behaviour of AISI H11 Steel ÜNLÜOĞLU O., ÇELİK O. N. JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , no.4, pp.1495-1503, 2022 (ESCI)
Modeling of residual stress and distortion in direct metal laser sintering process: a fast prediction approach Kundakcıoğlu E., Lazoglu I., Poyraz Ö., YASA E. Production Engineering , vol.16, no.6, pp.769-783, 2022 (ESCI)
Heat transfer enhancement using different types of turbulators on the heat exchangers Çelik H. S., ERBAY L. B. Journal of Thermal Engineering , vol.7, no.7, pp.1654-1670, 2021 (Scopus)
Modeling of Heat Transfer Around a Square and a Circle: A Novel ANN-Based Approch Yetik Ö. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi , vol.11, no.2, pp.1-14, 2021 (Peer-Reviewed Journal)
Investigation of the Tribological and Mechanical Properties of Boron Steels in Terms of Potential Usage in Agricultural Applications BOZKURT F., ÇAKIR F. H., ER Ü. Journal of Polytechnic , vol.24, no.6, pp.431-438, 2021 (ESCI)
Hot ultrasonic assisted machining modelling of Ti6Al4V in terms of power consumption SOFUOĞLU M. A., KUŞHAN M. C., ORAK S. Journal of Advances in Manufacturing Engineering , vol.2, pp.33-41, 2021 (Peer-Reviewed Journal)
Seramik Malzemelerde Piroplastik Deformasyonların Deneysel Analizi ve Sonlu-Elemanlar Yöntemiyle Doğrulanması Ürkmez A., Manav S., ZAFER N. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi , vol.23, 2021 (Peer-Reviewed Journal)
Laser Surface Texturing and Techniques to Improve the Tribological Properties of Materials Demircan Y., Gemici S., SERT A. Open Journal of Nano , vol.6, no.2, pp.41-58, 2021 (Peer-Reviewed Journal)
Curve/probabilistic fitting of damage metrics for Al-7075 materials behavior by using electromechanical impedance method HAYDARLAR G., TEKKALMAZ M., SOFUOĞLU M. A. Journal of Polytechnic , vol.24, pp.481-494, 2021 (ESCI)
Numerical investigation of heat transfer and pressure drop characteristics in an offset strip fin heat exchanger Doğan B., Öztürk M. M., Erbay L. B. JOURNAL OF THERMAL ENGINEERING , vol.7, no.6, pp.1417-1431, 2021 (ESCI)
An electromechanical in situ viscosity measurement technique for shear thickening fluids HAYDARLAR G., SOFUOĞLU M. A., GÜRGEN S., KUŞHAN M. C., TEKKALMAZ M. ADVANCED ENGINEERING FORUM , 2021 (Peer-Reviewed Journal)
Analysis of Energy Saving in Hydraulic Systems Ergür H. S. Euroasia Journal of Mathematics, Engineering, Natural & Medical Sciences International Indexed and Refereed , vol.8, no.15, pp.61-70, 2021 (Peer-Reviewed Journal)
BİYOMİMETİK, KUŞLAR VE PLANÖRLER Keskin G., Kuşhan M. C. Makina , no.164, pp.11-12, 2020 (Non Peer-Reviewed Journal)
Giyilebilir Hareket Sensörü Kullanılarak Dinamik Model ile Üst Uzuv Eklemleri Üzerine Etkiyen Kuvvetlerin ve Torkların Belirlenmesi Yanikören M., Yılmaz S., Usanmaz B., Tezgel S., Yazar M., Gündoğdu Ö. Iğdır Üniversitesi Fen Bilimleri Enstitüsü Dergisi , vol.10, no.4, pp.2850-2859, 2020 (Peer-Reviewed Journal)
Ti6Al4V ALAŞIMINDA ESNEK HONLAMA VE SİLİNDİRİK PARLATMA İŞLEMLERİNİN DELİK YÜZEY ÖZELLİKLERİNE ETKİLERİNİN İNCELENMESİ Ökmen H., Er Ü. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi , vol.28, no.2, pp.128-135, 2020 (Peer-Reviewed Journal)
AISI M2 Takım Çeliğinin Mikroyapısı ve Mekanik Davranışları Üzerine Derin Kriyojenik İşlemin ve Temperlemenin Etkisi SERT A. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi , vol.22, no.66, pp.801-811, 2020 (Peer-Reviewed Journal)
NUMERICAL ANALYSIS OF HEAT TRANSFER PERFORMANCE AND THERMAL DISTRIBUTION AFFECTION OF PANEL RADIATORS TO INVOLVING PROPYLENE GLYCOL AS INTERNAL FLUID WITH WATER Çelik Z., Çelik H. S., Uçar M. Adıyaman Üniversitesi Mühendislik Bilimleri Dergisi , vol.7, no.12, pp.45-55, 2020 (Peer-Reviewed Journal)
An Investigation on the Electrical Energy Capacity of Cylindrical Lithium-Ion and Lithium Iron Phosphate Battery Cells for Hybrid Aircraft Yetik Ö., Tarhan B., Karakoç T. H. SAE INTERNATIONAL JOURNAL OF AEROSPACE , vol.13, no.2, pp.115-128, 2020 (ESCI)
Yeni Nesil Uçak Motorları ve Uçaklar Arslanoğlu B., Kuşhan M. C. Makina , no.160, pp.10-13, 2020 (Non Peer-Reviewed Journal)
Plazma Transferli Ark (PTA) Yöntemi ile Üretilen WC Kompozit Kaplamalarda Enerji Girdisinin Mikroyapısal ve Tribolojik Özelliklere Etkisi KILIÇAY K. Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi , vol.7, no.1, pp.251-264, 2020 (Peer-Reviewed Journal)
Investigation Of Tribological And Mechanical Performance Of Cryogenic Treated Medium Carbon Steel, 38mnvs6 KAYA E., ULUTAN M., KILIÇAY K., BAYAR İ. Journal Of The Balkan Tribological Association , vol.617, no.627, pp.26-4, 2020 (Scopus)
Pnömatik Sistemlerde Enerji Verimliliği ZAİM A., ARAS H. Mühendis ve Makina , vol.61, no.698, pp.31-45, 2020 (Peer-Reviewed Journal)
Bakım Uygulamalarında Robotların Yardımcı Ekipman Olarak Kullanılması Yılmaz S. Mühendis ve Makina , vol.61, no.699, pp.132-143, 2020 (Peer-Reviewed Journal)
UÇMAYA DEVAM EDİYOR ŞANLI DAKOTA Kuşhan M. C. Makina , no.163, pp.12-13, 2020 (Non Peer-Reviewed Journal)
THE EFFECT OF THE USE OF DIFFERENT COVER MATERIALS ON HEAT TRANSFER IN FLAT SOLAR COLLECTORS TEKKALMAZ M., TİMURALP Ç., SERT Z. JOURNAL OF THERMAL ENGINEERING , vol.6, no.5, pp.829-842, 2020 (ESCI)
Three-Dimensional Thermal Study on Lithium-Ion Batteries in a Hybrid Aircraft: Numerical and Experimental Investigations Yetik Ö., Karakoç T. H. SAE INTERNATIONAL JOURNAL OF AEROSPACE , vol.13, no.2, pp.213-223, 2020 (ESCI)
Experimental study on Tribological Performance of SIC Composite Coating Layers KILIÇAY K., ULUTAN M., KAYA E., BAYAR İ. Journal Of The Balkan Tribological Association , vol.26, no.2, pp.390-400, 2020 (Scopus)
ELECTRO-MECHANICAL IMPEDANCE BASED SHM OF THICK STRUCTURES IN BROAD-BAND FREQUENCY SPECTRUM TEKKALMAZ M. Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering , 2020 (Peer-Reviewed Journal)
Experimental investigation of newly designed cutting tool inserts in turning SOFUOĞLU M. A., GÜRGEN S., KUŞHAN M. C. Journal of Production Systems and Manufacturing Science , 2020 (Peer-Reviewed Journal)
Fuzzy Applications of FUCOM Method in Manufacturing Environment SOFUOĞLU M. A. JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , vol.23, no.1, pp.189-195, 2020 (ESCI)
Eskişehir Ilinde R744 Soğutucu Akışkanlı Iki Buharlaştırıcılı Bir Soğuk Hava Deposu Tasarımı ALTUN Ö., ASLANTAŞ K., SÖKMEN E. Soğutma Dünyası , no.88, pp.50-57, 2020 (Peer-Reviewed Journal)
The Analysis of Safety Topics in Manufacturing Industry ERGÜR H. S. International Journal of Humanities and Social Development Research , vol.4, no.1, pp.31-40, 2020 (Peer-Reviewed Journal)
A Benchmark Study for Phase Transformation of Shape Memory Alloy Based Split Ring Resonator Structure Under a Heating and Cooling Thermal Cycle ÖZTÜRK M. M., DOĞAN B. Dicle Üniversitesi Mühendislik Fakültesi Mühendislik Dergisi , vol.11, no.1, pp.239-250, 2020 (Peer-Reviewed Journal)
COVID-19 UN DÜNYA SİVİL HAVACILIĞINA ETKİSİ Kuşhan M. C. MAKİNA , no.162, pp.10-13, 2020 (Non Peer-Reviewed Journal)
A Finite Element Procedure for Sliding Contact Problems Involving Heterogeneous Coefficient of Friction ARSLAN O. JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , vol.23, no.1, pp.197-205, 2020 (ESCI)
Art Arda Yerleştirilmiş Eş Sıcaklıktaki İki Silindir Etrafında Akış ve Isı Geçişi SERT Z., TİMURALP Ç. Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi , vol.7, no.1, pp.342-353, 2020 (Peer-Reviewed Journal)
MERKEZİNDE EĞİMLİ ELİPTİK SİLİNDİR BULUNAN KAPALI KUTULARDA ISI GEÇİŞİ YILMAZ M., Altıntop A., Aydoğan B., SERT Z., TİMURALP Ç. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi , vol.27, no.3, pp.225-232, 2019 (Peer-Reviewed Journal)
Finite element modelling of the hot ultrasonic assisted turning of titanium alloy in terms of different vibrational parameters KUŞHAN M. C., ORAK S., SOFUOĞLU M. A. International Journal of Mechanical and Production Engineering (ICSTEM 2019 konferansından) , 2019 (Peer-Reviewed Journal)
Numerical Investigation of Hot Ultrasonic Assisted Turning of Titanium Alloy Çakır F. H., Gürgen S., Sofuoğlu M. A., Kuşhan M. C., Orak S. European Journal of Engineering and Natural Sciences , vol.3, no.2, pp.147-151, 2019 (Peer-Reviewed Journal)
Investigation of the Behavior of Piezoelectric Sensors Used in Structural Health Monitoring at Different Temperatures TEKKALMAZ M., HAYDARLAR G., SOFUOĞLU M. A. JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , vol.22, no.3, pp.597-606, 2019 (ESCI)
Design and Economic Analysis of a Novel Hot Ultrasonic Machining System SOFUOĞLU M. A., GÜRGEN S., ÇAKIR F. H., ORAK S., KUŞHAN M. C. JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , vol.22, no.2, pp.277-282, 2019 (ESCI)
Yeni Nesil Uçak Kanatları Arslanoğlu B., Şahin E., KUŞHAN M. C. Makina , vol.17, no.156, pp.15-16, 2019 (Non Peer-Reviewed Journal)
Yeni sıcak ultrasonik yardımlı imalat ünitesi tasarımı ve ekonomik analizi SOFUOĞLU M. A., GÜRGEN S., ÇAKIR F. H., ORAK S., KUŞHAN M. C. Journal of Polytechnic , 2019 (Peer-Reviewed Journal)
ÇOK KULLANIMLI 1500M. İRTİFALI ROKET TASARIMI Arslanoğlu B., Şahin E., Güzel H. M., KUŞHAN M. C. Makina , no.155, pp.20-21, 2019 (Non Peer-Reviewed Journal)
Berkan ARSLANOĞLU, Emre ŞAHİN, Melih Cemal Kuşhan, Yeni Nesil Uçak Kanatları, Makina, 17-18, 156, 2019 Arslanoğlu B., Şahin E., Kuşhan M. C. Makina , vol.17, no.156, pp.15-16, 2019 (Non Peer-Reviewed Journal)
Anisotropic impact toughness of chopped carbon fiber reinforced nylon fabricated by material extrusion-based additive manufacturing YASA E. Eskişehir Technical University Journal of Science and Technology A- Applied Sciences And Engineering , vol.20, no.2, pp.195-203, 2019 (Peer-Reviewed Journal)
Havacılıkta MRO ve Endüstri 4.0 KUŞHAN M. C. Makina , no.153, pp.17-18, 2019 (Non Peer-Reviewed Journal)
Havacılıkta MRO ve Endüstri 4.0 Kuşhan M. C. Makina , vol.17, no.1, pp.15-18, 2019 (Non Peer-Reviewed Journal)
Heat exchanger design studies for molten salt fast reactor Kose U., Koc U., ERBAY L. B., Ogut E., Ayhan H. EPJ NUCLEAR SCIENCES & TECHNOLOGIES , vol.5, 2019 (ESCI)
Yapısal sağlık izlemede kullanılan piezoelektrik sensörlerin değişen sıcaklıklarda davranışının incelenmesi TEKKALMAZ M., HAYDARLAR G., SOFUOĞLU M. A. Journal of Polytechnic , 2019 (Peer-Reviewed Journal)
Ni-Ti Akıllı Alaşım İnce Filmin Sıcaklığa Bağlı X-Ray Kırınımı ile Karakterizasyonu ve Faz Dönüşümü Tespiti ÖZTÜRK M. M., DOĞAN B. Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi , vol.6, pp.1-11, 2019 (Peer-Reviewed Journal)
Experimental investigation of the effect of front cover on energy consumption and energy level in built-in house oven ALTUN Ö., Yildiz S., Anik T. PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , vol.25, no.4, pp.403-409, 2019 (ESCI)
Haptik Etkileşimin Medikal Uygulamaları Yılmaz S. ESOGÜ BİLİM KÜLTÜR SANAT , no.2, pp.35-37, 2019 (Non Peer-Reviewed Journal)
A fuzzy behavioral Topsis model in manufacturing environment SOFUOĞLU M. A. Advanced Engineering Forum , 2019 (Peer-Reviewed Journal)
Investigation of the R260 Rail Steel Behavior at Varying Temperatures by EMI Method TEKKALMAZ M., HAYDARLAR G., Umit E. R. JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , vol.22, no.4, pp.955-960, 2019 (ESCI)
Da Vincvi’den Sikorsky’e KUŞHAN M. C. Makina , no.152, pp.21-22, 2019 (Non Peer-Reviewed Journal)
Additive Manufacturing in Land Vehicle Industry Ersoy K., KOÇ B., YASA E. American Journal of Biomedical Science and Research , 2019 (Peer-Reviewed Journal)
Comparison of different FEM software in terms of hot ultrasonic assisted machining technique SOFUOĞLU M. A., KUŞHAN M. C., ORAK S. Materials Science Forum (ICMDA 2019 konferansından) , 2019 (Scopus)
Unpowered Flight Principle: Sailplane keskin g., DURMUŞ S., KARAKAYA M., teoman A., KUŞHAN M. C. Engineer and Machinery , vol.60, no.695, pp.165-177, 2019 (Peer-Reviewed Journal)
An Investigation on Surface Roughness and Tool Wear in Turning Operation of Inconel 718 GÜRGEN S., Tali D., KUŞHAN M. C. JOURNAL OF AEROSPACE TECHNOLOGY AND MANAGEMENT , vol.11, 2019 (ESCI)
JET MOTORLARINDA UYGULANAN EFÜZYON FİLM SOĞUTMA AKIŞ KARAKTERİSTİKLERİNİN PIV YÖNTEMİYLE İNCELENMESİ Yalçın S. E., Yakın E. Y., Karakoç T. H., Kuşhan M. C. Sürdürülebilir Havacılık Araştırmaları Dergisi , vol.3, no.2, pp.55-62, 2018 (Peer-Reviewed Journal)
Hidrolik Sistemlerdeki Enerji Verimliliği ERGÜR H. S. Uludağ University Journal of The Faculty of Engineering , vol.23, no.2, pp.241-254, 2018 (Peer-Reviewed Journal)
SYSTEMATICAL REVIEW ON THE NUMERICAL SIMULATIONS OF LASER POWDER BED ADDITIVE MANUFACTURING KUŞHAN M. C., Poyraz O., UZUNONAT Y., ORAK S. SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES-SIGMA MUHENDISLIK VE FEN BILIMLERI DERGISI , vol.36, no.4, pp.1195-1212, 2018 (ESCI)
Numerical investigation of machining characteristics of Hastelloy-X SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., ORAK S., KUŞHAN M. C. The Online Journal of Science and Technology , vol.8, no.4, pp.72-76, 2018 (Peer-Reviewed Journal)
A new hybrid decision making model to optimize machining operations SOFUOĞLU M. A. The Online Journal of Science and Technology (ISTEC 2017 konferansından) , 2018 (Peer-Reviewed Journal)
Maintenance Error Detection Procedure and A Case Study of Failure Analysis Locomotive Diesel Engine Bearings ÇAKIR F. H., SERT A., ÇELİK O. N., Dereoglu N. JOURNAL OF FAILURE ANALYSIS AND PREVENTION , vol.18, no.2, pp.356-363, 2018 (ESCI)
The Use of Additive Manufacturing Technologies in Maintenance Applications of Aviation Components Poyraz Ö., KUŞHAN M. C. Engineer and Machinery , vol.59, no.691, pp.59-69, 2018 (Peer-Reviewed Journal)
Composite Structures of C919 GÜRGEN S., SOFUOĞLU M. A., ÇAKIR F. H., KUŞHAN M. C. Elixir , vol.122, no.1, pp.51767-51770, 2018 (Peer-Reviewed Journal)
Urban Light Rail Transportation Systems Catenary Line Anti-Icing Applications, Laboratory and Field Tests ER Ü., ÇAKIR F. H. Anadolu University Journal of Science and Technology-A Applied Sciences and Engineering , vol.19, no.2, pp.433-442, 2018 (Peer-Reviewed Journal)
An experimental investigation of the ultrasonic-assisted machining of Ti-6Al-4V ÇAKIR F. H., GÜRGEN S., ORAK S., KUŞHAN M. C., SOFUOĞLU M. A. Makina Tasarımı ve İmalat Dergisi (UMTIK 2018 konferansından) , 2018 (Peer-Reviewed Journal)
The Use of Additive Manufacturing Technologies in Maintenance Applications of Aviation Components Kuşhan M. C. Mühendis ve Makine , vol.59, no.691, pp.59-69, 2018 (Peer-Reviewed Journal)
Machining of Hastelloy-X based on finite element modelling Çakır F. H., Sofuoğlu M. A., Gürgen S. Advanced Engineering Forum , vol.30, 2018 (Peer-Reviewed Journal)
Suda Dağılma Dayanımı İndeksi (SDI) Deneyinde Kullanılan Küre Örneklerinin Hazırlaması İçin Aşındırıcı Çanak Tasarımı ANKARA H., AKSOY M., YEREL KANDEMİR S., ARAS H. Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi , vol.4, no.2, pp.8-14, 2017 (Peer-Reviewed Journal)
MULTI OBJECTIVE OPTIMIZATION OF TURNING OPERATION USING HYBRID DECISION MAKING ANALYSIS Sofuoğlu M. A., Arapoğlu R. A., Orak S. Anadolu University Journal of Science and Technology A - Applied Sciences and Engineering , vol.18, no.3, pp.595-610, 2017 (Peer-Reviewed Journal)
Two- and three-dimensional transient analysis of flow and heat transfer in structures with domical and curved roofs Altac Z., Ugurlubilek N. Journal of Thermal Engineering , vol.3, no.5, pp.1489-1497, 2017 (Scopus)
Computational contact mechanics analysis of laterally graded orthotropic half-planes ARSLAN O. World Journal of Engineering , vol.14, no.2, pp.145-154, 2017 (Scopus)
A novel hybrid multi criteria decision making model: Application to turning operations Sofuoğlu M. A., Orak S. International Journal of Intelligent Systems and Applications in Engineering , vol.5, no.3, pp.124-131, 2017 (Peer-Reviewed Journal)
Hybridizing a multi response Taguchi algorithm with Reference Ideal method to solve machining problems SOFUOĞLU M. A. International Journal of Intelligent Systems and Applications in Engineering , vol.2, pp.64-69, 2017 (Peer-Reviewed Journal)
Sonlu Elemanlar Yöntemi Kullanılarak Temporal Kemiğin Zayıf Noktalarının Statik Analizi ve Klinik Uygulaması / Static Analysis of the Most Weakness Part of Temporale Bone Using Finite Element Method and Its Clinical Importance ÖZDEN H., GÖK K., İNAL S., TAŞPINAR F., ORAK S., ÖZ S., et al. OSMANGAZİ JOURNAL OF MEDICINE , vol.39, no.2, pp.11-17, 2017 (Peer-Reviewed Journal)
Hidrolik Preslerde Çift El Kumanda Sistemleriyle Güvenliğin İyileştirilmesi ERGÜR H. S. Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , pp.280-291, 2017 (Peer-Reviewed Journal)
A New Approach To Chip Breaking Application In Turning Operation Using Variable Feed Rates ÇAKIR F. H., ÇELİK O. N. Cumhuriyet Science Journal , vol.38, no.4, pp.188-196, 2017 (Peer-Reviewed Journal)
FRICTION AND WEAR BEHAVIOR OF PLASMA TRANSFERRED ARC COATING ON AISI 4140 STEEL OF BORON CARBIDE AND NICKEL POWDER MIXTURE Ay G. M., Çelik O. N. The Online Journal of Science and Technology , vol.7, no.1, pp.54-62, 2017 (Peer-Reviewed Journal)
Combined Natural Convection and Thermal Radiation in an InclinedCubical Cavity with a Rectangular Pins Attached to Its Active Wall SERT Z., TEKKALMAZ M., TİMURALP Ç. Periodicals of Engineering and Natural Sciences , vol.5, no.3, pp.347-354, 2017 (Scopus)
A new supperalloy: ALLVAC 718 PLUSTM SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., KUŞHAN M. C. International Journal of Mechanical And Production Engineering (ICSTEM 2017 konferansından) , 2017 (Peer-Reviewed Journal)
TURNING OPERATION OF NICKEL BASED SUPERALLOY RENE 41 Tali D., GAŞAN H., GÜLEŞEN M., GÜRGEN S., KUŞHAN M. C. International Journal of Mechanical and Production Engineering , vol.5, no.5, 2017 (Peer-Reviewed Journal)
High Performance Fabrics in Body Protective Systems Gürgen S., Kuşhan M. C. Materials Science Forum , vol.880, pp.132-135, 2017 (Scopus)
Ultrasonic Assisted Machining Methods: A Review KUŞHAN M. C., ORAK S., UZUNONAT Y. International Journal of Advanced Engineering Research and Applications (IJA-ERA) , vol.3, no.5, 2017 (Peer-Reviewed Journal)
A NEW SUPERALLOY “ALLVAC 718 PLUSTM SOFUOĞLU M. A., GÜRGEN S., ÇAKIR F. H., KUŞHAN M. C. International Journal of Mechanical And Production Engineering , 2017 (Peer-Reviewed Journal)
Descrıptıon Of Modıfıcatıon Wıth New Armor Protectıon Plates For Helicopters GÜRGEN S., Akın Ş. K., KUŞHAN M. C. Journal of Advanced Research in Engineering Technology , vol.1, no.2, pp.1-4, 2017 (Peer-Reviewed Journal)
Nikel Esaslı Süperalaşım Rene 41’xxin Tornalama İşlemi tali d., GAŞAN H., GÜLEŞEN M., GÜRGEN S., KUŞHAN M. C. TEI Post , 2017 (Non Peer-Reviewed Journal)
A new superalloy:ALLVAC 718 TM SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., KUŞHAN M. C. International Journal of Mechanical And Production Engineering , vol.5, no.3, pp.125-128, 2017 (Peer-Reviewed Journal)
NUMERICAL INVESTIGATION OF THE BOTTOM CABINET OF A HOUSEHOLD REFRIGERATOR YILMAZ H., Erbay L. B., DOĞAN B. JOURNAL OF THERMAL ENGINEERING , vol.2, no.5, pp.946-953, 2016 (ESCI)
Transient Exergy Analysis of the Condenser and Evaporator of an Air Source Heat Pump Water Heater ÖZTÜRK M. M., ERBAY L. B. Journal of Mechanics Engineering and Automation , vol.6, no.7, 2016 (Peer-Reviewed Journal)
Investigation of Fluid Flow and Heat Transfer in a Channel with an Open Cavity Heated from Below Side TİMURALP Ç., ALTAÇ Z. Mugla Journal Of Science and Technology , vol.2, no.1, pp.55-59, 2016 (Peer-Reviewed Journal)
INVESTIGATION OF FLUID FLOW AND HEAT TRANSFER IN A CHANNEL WITH AN OPEN CAVITY HEATED FROM BOTTOM SIDE Timuralp Ç., Altaç Z. Mugla Journal of Science and Technology , vol.2, no.1, pp.55-59, 2016 (Peer-Reviewed Journal)
Rheological Properties of Shear Thickening Fluids GÜRGEN S., KUŞHAN M. C. JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , vol.19, no.4, pp.409-414, 2016 (ESCI)
EXPERIMENTAL ANALYSIS OF THE EFFECT OF COLD FLUID INLET TEMPERATURE ON THE THERMAL PERFORMANCE OF A HEAT EXCHANGER DOĞAN B., ERBAY L. B. JOURNAL OF THERMAL ENGINEERING , vol.2, no.1, pp.583-592, 2016 (ESCI)
Environmentally friendly material Hexagonal boron nitride Ay N., Ay G. M., Göncü Y. Journal of Boron , vol.1, no.2, pp.66-73, 2016 (Peer-Reviewed Journal)
Numerical Investigation of Heat Transfer of Nanofluid Flow Past Two Cylinder in Tandem Arrangements YETİK Ö. International Journal of Advancements in Mechanical and Aeronautical Engineering , vol.3, no.1, pp.51-55, 2016 (Peer-Reviewed Journal)
An optimization approach to prevent chatter vibrations SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., ORAK S., ÇELİK O. N., KUŞHAN M. C. Int. J. Manag. Appl. Sci. , 2015 (Peer-Reviewed Journal)
Flexible Fixturing Systems For Low Production Quantities SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., ORAK S., ÇELİK O. N., KUŞHAN M. C. International Journal of Mechanical And Production Engineering, , vol.3, no.8, pp.18-20, 2015 (Peer-Reviewed Journal)
PNÖMATİK SİSTEMLERDE SAĞLIK VE GÜVENLİK ERGÜR H. S. Mühendis ve Makina , vol.56, no.662, pp.63-71, 2015 (Peer-Reviewed Journal)
Multi Response Optimization Of Turning Operation With Self-Propelled Rotary Tool Gürgen S., Çakır F. H., Sofuoğlu M. A., Orak S., Kuşhan M. C. Procedia - Social and Behavioral Sciences , no.195, pp.2576-2585, 2015 (Peer-Reviewed Journal)
Kompakt Bir Isı Değiştiricide Dış Akış Entropi Üretiminin Sayısal İncelenmesi DOĞAN B., ERBAY L. B. Isıtma, Soğutma, Havalandırma, Klima, Yangın ve Sıhhı Tesisat Dergisi , pp.22-31, 2015 (Peer-Reviewed Journal)
Operational Improvements in The Assembly Process of Lead Cable Using New Methods Sofuoğlu M. A., Çakır F. H., Gürgen S., Kuşhan M. C. Procedia - Social and Behavioral Sciences , no.195, pp.2576-2585, 2015 (Peer-Reviewed Journal)
Pnömatik Sistemlerde Sağlık ve Güvenlik ERGÜR H. S. Mühendis ve Makina , vol.56, no.662, pp.63-71, 2015 (Peer-Reviewed Journal)
ADHESIVE WEAR BEHAVIOR OF TIN AND CRNCOATED DIN115CRV3 STEEL TOOLS AT DIFFERENT LOAD CONDITIONS ÖTEYAKA M. Ö., Yıldırım M. M., ULUTAN M., ÇELİK O. N. International Journal of Advances in Mechanical and Civil Engineering , vol.2, no.5, pp.1-4, 2015 (Peer-Reviewed Journal)
Cidarına Isıtıcı Yerleştirilmiş Kapalı Kutu İçindeki Su BazlıNanoakışkanların Laminer Doğal Taşınımla Isı Transferi SERT Z., TİMURALP Ç. Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , vol.15, pp.1-12, 2015 (Peer-Reviewed Journal)
Finite Element Modeling of Ultrasonic Assisted Turning of Ti6Al4V Alloy Çakır F. H., Gürgen S., Sofuoğlu M. A., Çelik O. N., Kuşhan M. C. Finite Element Modeling of Ultrasonic Assisted Turning of Ti6Al4V Alloy , no.195, pp.2839-2848, 2015 (Peer-Reviewed Journal)
Analysis of Total Life Cycle Costing and Efficiency for Pumps ERGÜR H. S. International Journal of Scientific and Technological Research , vol.1, no.3, pp.67-73, 2015 (Peer-Reviewed Journal)
Numerical investigation of convective heat transfer and fluid flow in a channel with two semi circular shaped obstacles UĞURLUBİLEK N. Süleyman Demirel Üniversitesi Mühendislik Bilimleri ve Tasarım Dergisi , vol.2, no.2, pp.85-89, 2014 (Peer-Reviewed Journal)
Eskişehir’de rüzgar ve güneş enerjisi potansiyelinin belirlenmesi Yıldızay H. D., Aras H., Yılmaz V. Dicle University Journal of Engineering , vol.5, no.1, pp.49-58, 2014 (Peer-Reviewed Journal)
Duvar yakinlarindaki kare kesitli iki silindir etrafındaki akisin incelenmesi ve isi gecisinnin ANN ile tahmini YETİK Ö., MAHİR N. Social GAU Journal Applied Sciences , vol.6, no.10, pp.22-34, 2014 (Peer-Reviewed Journal)
Tribological behaviours of lubricating oils with CNT and Si3N4 nanoparticle additives MEHMET NİYAZİ Ç., ÇELİK O. N., SERT A. Archives of Materials Science and Engineering , vol.67, no.2, pp.53-59, 2014 (Scopus)
Tribological behaviours of lubricating oils with CNT and Si3N4nanoparticle additives Çöl M., ÇELİK Ö., SERT A. Archives of Materials Science and Engineering , vol.67, no.2, pp.53-59, 2014 (Scopus)
Wireless Eddy Current Probe Prototype and Monitor Design and Aircraft Maintenance Applications engin g., kuşhan M. C., ÇEVİK S. Advanced Materials Research , vol.905, pp.448-451, 2014 (Scopus)
İtalya da Makina Mühendisliği Eğitimi DOĞAN B., ER Ü. Engineers and Machinery , vol.52, no.651, pp.56-60, 2013 (Peer-Reviewed Journal)
Kompakt Isı Değiştiriciler ERBAY L. B., UĞURLUBİLEK N., ALTUN Ö., DOĞAN B. Mühendis ve Makina , vol.54, no.646, pp.37-48, 2013 (Peer-Reviewed Journal)
Kompakt Isı Değiştiriciler ERBAY L. B., UĞURLUBİLEK N., ALTUN Ö., DOĞAN B. Mühendis ve Makina , vol.54, no.646, pp.37-48, 2013 (Peer-Reviewed Journal)
İtalya'da Makine Mühendisliği Eğitimi DOĞAN B., ER Ü. Mühendis ve Makina , vol.52, no.651, pp.56-60, 2013 (Peer-Reviewed Journal)
Wireless Eddy Current Probe Design and Applications in Aircraft Maintenance Kuşhan M. C., Ünalır T., Göde E., Ekinci H. International Technology Research Letters , vol.1, no.1, pp.18-20, 2012 (Peer-Reviewed Journal)
Mukayese Metodu Kullanılarak Termal Bariyer Kaplamanın Isı İletim Katsayısının Deneysel Olarak Tayin Edilmesi ALTUN Ö., BÖKE Y. E. Erciyes Üniversitesi Fen Bilimleri Dergisi , vol.28, no.2, pp.110-115, 2012 (Peer-Reviewed Journal)
Inconel 718 Geliştirildi ALLVAC 718 Plus UZUNONAT Y., ÇEVİK S., KUŞHAN M. C. Mühendis ve Makina , vol.633, pp.13-15, 2012 (Peer-Reviewed Journal)
TROUBLESHOOTING FOR RELIEF VALVES USED IN HYDRAULIC SYSTEM Yasar P., ERGÜR H. S. CIENTIFIC PROCEEDINGS IX INTERNATIONAL CONGRESS "MACHINES, TECHNOLОGIES, MATERIALS , vol.2, pp.37-38, 2012 (Peer-Reviewed Journal)
Mobile Robot Localization via Outlier Rejection in Sonar Range Sensor Data YILMAZ S., Kayir H. E., KALECİ B., PARLAKTUNA O. ISTANBUL UNIVERSITY-JOURNAL OF ELECTRICAL AND ELECTRONICS ENGINEERING , vol.12, no.1, pp.1457-1464, 2012 (ESCI)
Makine Endüstrisinde Karşılaşılan Toz Patlaması Olayı ve Atex Yönergeleri ERGÜR H. S. Eskişehir Osmangazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , vol.25, no.2, pp.1-18, 2012 (Peer-Reviewed Journal)
Gaz Türbinlerinin Bakımında Sıcak Kısım Parçalarına Uygulanan Sıcak Lehimleme Brazing Tamir İşlemi ve Proses Etkinliğinin Değerlendirilmesi Uzunonat Y., Çevik S., Kuşhan M. C., Diltemiz S. F. Mühendis ve Makina , vol.633, pp.13-15, 2012 (Peer-Reviewed Journal)
Türkiyedeki Termik Santrallerin Etkinlik Analizi:Paremtrik Ve Paremetrik Olmayan Yaklaşımlar KÖSE R., YETİK Ö., ÖZGÜR M. A., ARSLAN O. Dumlupınar Üniversitesi Fen Bilimleri Enstitüsü Dergisi , 2011 (Peer-Reviewed Journal)
Avustralyada Makine Mühendisliği Eğitimi Kuşhan M. C. Mühendis ve Makina , vol.621, pp.74-75, 2011 (Peer-Reviewed Journal)
State-of-Art Technology ALLVAC 718 Plus Superalloy for Gas Turbine Engine Parts Çevik S., Uzunonat Y., Diltemiz S. F., Kuşhan M. C., Günay R. Advanced Materials , no.213, pp.131-135, 2011 (Peer-Reviewed Journal)
Numerical estimation of the condensate flow rate on the condenser pipe UĞURLUBİLEK N. Eskişehir Osmangazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , vol.24, no.2, pp.41-49, 2011 (Peer-Reviewed Journal)
Inconel 718 Geliştirildi: ALLVAC 718 Plus Çevik S., Uzunonat Y., Kuşhan M. C. Mühendis ve Makina , no.614, pp.36-40, 2011 (Peer-Reviewed Journal)
Helisel Türbülatörün Isı Geçişine Etkisinin Sayısal İncelenmesi UĞURLUBİLEK N., URALCAN İ. Y. Eskişehir Osmangazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , vol.24, no.2, pp.71-83, 2011 (Peer-Reviewed Journal)
The effect of laser glazing process on microstructure of plasma sprayed thermal barrier coatings Kuşhan M. C., Diltemiz S. F. ANADOLU UNIVERSITY JOURNAL OF SCIENCE AND TECHNOLOGY –A , vol.12, no.2, pp.105-110, 2011 (Peer-Reviewed Journal)
MoSi2 Composites for High Temperature Structural Applications Uzunonat Y., Çevik S., Diltemiz S. F., Kuşhan M. C., Ölmez R. Advanced Materials , no.214, pp.103-107, 2011 (Peer-Reviewed Journal)
Tornalamada tırlama titreşimlerinin süreç sönümlemesinin incelenmesi ORAK S., TÜRKEŞ E. Mühendis ve Makina , no.613, pp.72-80, 2011 (Peer-Reviewed Journal)
Cyclic Oxidation Behaviour of MoSi2 and MoSi2-Si3N4 Composites for Aircraft Gas Turbine Elements Uzunonat Y., Çevik S., Diltemiz S. F., Kuşhan M. C. Advanced Materials , no.214, pp.349-353, 2011 (Peer-Reviewed Journal)
15B35H Borlu Çeliğinin Kuru Kayma Koşullarında Sürtünme ve Aşınma Davranışının İncelenmesi ER Ü. Dumlupınar Üniversitesi Fen Bilimleri Enstitüsü Dergisi , no.25, pp.75-82, 2011 (Peer-Reviewed Journal)
Amerika Birleşik Devletlerin de Makine Mühendisliği Eğitimi ALTUN Ö., TİMURALP Ç., YILMAZ S., ULUTAN M. Mühendis ve Makine , vol.52, no.621, pp.36-42, 2011 (Peer-Reviewed Journal)
Plazma transferli ark kaynak yüzey işlemiyle AISI 304 paslanmaz çelik yüzeyine WC Ni B4C kompozit kaplamasının mikroyapısal karakteristiği BUYTOZ S., ULUTAN M., KURT B., ISLAK S., SOMUNKIRAN İ. E-Journal of New World Sciences Academy , vol.5, no.1, pp.35-47, 2010 (Peer-Reviewed Journal)
Gözenekli malzemelerde ısı iletim katsayısının ve kritik yarıçapın değişimi ALTUN Ö., GÜRKAN İ. Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi , vol.9, no.1, pp.79-85, 2009 (Peer-Reviewed Journal)
Effect of the Microstructure of EB PVD Thermal Barrier Coatings on the Thermal Conductivity and the Methods to Reduce the Thermal Conductivity ALTUN Ö., BÖKE Y. E. Archives of Materials Science and Engineering , vol.40, no.1, pp.47-52, 2009 (Scopus)
TIG yöntemiyle yüzeyi sertleştirilen AISI 4140 çeliğinin mikroyapı incelemesi ULUTAN M., YILDIRIM M. M., BUYTOZ S. Eskişehir Osmangazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi , vol.22, no.1, pp.93-108, 2009 (Peer-Reviewed Journal)
Yarı küresel Engel Konulan Bir Kanal İçerisinde Isı Geçişi Ve Akışın Sayısal İncelenmesi UĞURLUBİLEK N. Eskişehir Osmangazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , vol.22, no.3, pp.45-54, 2009 (Peer-Reviewed Journal)
Isıl engelleyici kaplamaların etkin ısı iletim katsayısının teorik olarak belirlenmesi ALTUN Ö., BÖKE Y. E. Eskişehir Osmangazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , vol.22, no.2, pp.139-152, 2009 (Peer-Reviewed Journal)
Takım tezgahı tasarımında elektrik motoru seçimi TÜRKEŞ E., ORAK S. Dumlupınar Üniversitesi Fen Bilimleri Enstitüsü Dergisi , no.17, pp.105-116, 2008 (Peer-Reviewed Journal)
Problems for determining the thermal conductivity of TBCs by laser flash method Altun Ö., Böke Y. E., Kalemtaş A. Journal of Achievements in Materials and Manufacturing Engineering , vol.30, no.2, pp.115-120, 2008 (Scopus)
Borlanmış AISI 1030 çeliğinin abrazif aşınma özellikleri ÇELİK O. N., AKBAYIR Ö., GAŞAN H., ER Ü., AYDINBEYLİ N. Eskişehir Osmangazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , vol.21, no.1, pp.71-86, 2008 (Peer-Reviewed Journal)
- Tat M. E., Özenç F. Mühendis ve Makina , vol.48, no.572, pp.16-22, 2007 (Peer-Reviewed Journal)
Tornalamada ortogonal kesme için tırlama titreşimi ve kararlılığın lineer analizi ORAK S., TÜRKEŞ E. Eskişehir Osmangazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , vol.19, no.2, pp.89-108, 2006 (Peer-Reviewed Journal)
Taşıt titreşimlerinin teorik analizi ve bir bilgisayar modellemesi ER Ü., ORAK S., PAR B. Eskişehir Osmangazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , vol.19, no.2, pp.131-144, 2006 (Peer-Reviewed Journal)
Mikrolightlarda Kullanılan Motor Çeşitlerinin Tanımları Tali D., Uzundağ M., Kuşhan M. C. Makina , no.76, pp.43-45, 2006 (Non Peer-Reviewed Journal)
Her Yönüyle Microlight, Makina Tali D., Uzundağ M., Kuşhan M. C. Makina , no.75, pp.26-27, 2006 (Non Peer-Reviewed Journal)
TIG yöntemiyle yüzeyi sertleştirilen AISI 4340 çeliğinin mikroyapısının incelenmesi BUYTOZ S., ULUTAN M., YILDIRIM M. M. Osmangazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi , vol.18, no.1, pp.44-60, 2005 (Peer-Reviewed Journal)
TIG yöntemiyle yapılan WC ile yüzey sertleştirme işleminin abrasiv aşınma performansının incelenmesi YILDIRIM M. M., BUYTOZ S., ULUTAN M. Doğu Anadolu Bölgesi Araştırmaları , vol.3, no.2, pp.38-44, 2005 (Peer-Reviewed Journal)
STATISTICAL ANALYSIS OF WIND SPEED DATA YILMAZ V., ARAS H., ÇELİK H. E. Eskişehir Osmangazi Üniversitesi Müh.Mim.Fak.Dergisi , vol.18, no.2, pp.1-13, 2005 (Peer-Reviewed Journal)
The Abrasive Wear Behaviour of Boron Steels ER Ü. Osmangazi Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi , vol.17, no.2, pp.59-70, 2004 (Peer-Reviewed Journal)
Bor yayınımıyla yüzeyi sertleştirilmiş AISI 1030 ve AISI 1050 çeliklerinin abrazif aşınma dayanımlarının incelenmesi ER Ü., PAR B. Osmangazi Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , vol.17, no.1, pp.1-12, 2004 (Peer-Reviewed Journal)
Şekil Bellekli Alaşımların Uzay ve Havacılık Endüstrisindeki Uygulamaları KUŞHAN M. C., bektaş h. Turkish Aviation , vol.38, pp.18-19, 2002 (Peer-Reviewed Journal)
Vortex shedding from a square cylinder at different blockage ratios and locations MAHİR N. International Journal of Flud Mechanics Research , vol.29, no.1, pp.53-64, 2002 (Peer-Reviewed Journal)
Uçaklarda Panel Kompozit kullanımı Kuşhan M. C., Avcı P., Avcı Y. Turkish Aviation , vol.40, pp.50-51, 2002 (Peer-Reviewed Journal)
İlk Uçuşlar Kuşhan M. C. Turkish Aviation , no.33, pp.34-35, 2001 (Peer-Reviewed Journal)
FLA-A400 Projesi ve Türkiye Kuşhan M. C. Turkish Aviation , no.26, pp.21, 1999 (Peer-Reviewed Journal)
Havacılıktaki Uygulamalarıyla NDT KUŞHAN M. C., avcı p., avcı y. Turkish Aviation , vol.52, no.26, pp.39, 1999 (Peer-Reviewed Journal)
Askeri Hava Gücümüz ve Avrupa Kuşhan M. C. Tukish Aviation , no.45, pp.20-21, 1998 (Peer-Reviewed Journal)
Poliester reçineli polimer betonun sönüm yeteneği üzerine bir araştırma ORAK S., KARADEMİR Ş. Türk Mühendislik ve Çevre Bilimleri Dergisi , vol.22, no.4, pp.323-327, 1998 (Peer-Reviewed Journal)
Emektar C-47 Kuşhan M. C. Turkish Aviation , no.14, pp.20-21, 1998 (Peer-Reviewed Journal)
Hava Gücümüz ve Avrupa Kuşhan M. C. Makina , no.15, pp.24-25, 1996 (Non Peer-Reviewed Journal)
Bakım yöntemleri ve kestirimci bakım yönteminin bir uygulaması PAR B., ORAK S. Mühendis ve Makina , vol.35, no.416, pp.24-28, 1994 (Peer-Reviewed Journal)
Eksenel yüklü ve termik gerilmeli hiperstatik sistemlerin sonlu elemanlar yöntemiyle çözümü ORAK S., PAR B. Mühendis ve Makina , vol.34, no.406, pp.34-37, 1993 (Peer-Reviewed Journal)
Books & Book Chapters
Solid Lubricants Against Wear Formation in Aerospace Components Ay G. M. in: Failure in Aircraft Materials, Selim Gürgen, Editor, Springer, London/Berlin , Zug, pp.1-12, 2024
Laser Welding of Lightweight Aerospace Alloys Kaya E., Kılıçay K. in: Advances in Manufacturing for Aerospace Alloys , Selim Gürgen, Editor, Springer Nature, Zug, pp.135-162, 2024
Ultrasonic vibration-assisted machining with minimum quantity lubrication for aerospace materials Duman E., Yapan Y. F., Uysal A., Sofuoğlu M. A. in: Advances in Manufacturing for Aerospace Alloys, Selim Gürgen, Editor, Springer Nature, Aarau, pp.47-77, 2024
Vibration damping applications with cork composites Sheikhi M. R., Sofuoğlu M. A., Li J. in: Cork-Based Materials in Engineering:Design and Applications for Green and Sustainable Systems, Selim Gürgen, Editor, Springer Nature, Aarau, pp.31-47, 2024
Aeronautical/space applications of cork composites Ragimov Y., Sofuoğlu M. A., Gürgen S., Kuşhan M. C. in: Cork in aerospace: Cultivation to application, SELİM GÜRGEN,MEHMET ALPER SOFUOĞLU,MELİH CEMAL KUŞHAN, Editor, ESOGU Press, Eskişehir, pp.166-191, 2023
Development of Shear Thickening Fluid Based Polishing Slurries Sert A., Gürgen S., Kuşhan M. C. in: Shear Thickening Fluid Case Studies in Engineering, Selim Gürgen, Editor, Springer Nature, Alabama, pp.1-11, 2023
Compression Molding Method for Ulumina-Reinforced UHMWPE-Based Composites KAYA E., KILIÇAY K. in: Modern Manufacturing Processes for Aircraft Materials, Gürgen Selim, Pruncu Catalin I., Editor, Elsevier, pp.29-42, 2023
Shear thickening fluid integrated sandwich structures for vibration isolation Sheikhi M. R., Sofuoğlu M. A., Chen Z. in: Shear thickening fluid:Case Studies in Engineering, SELİM GÜRGEN, Editor, Springer Nature, Aarau, pp.27-40, 2023
Materials, Structures and Manufacturing for Aircraft Gürgen S. (Editor), Kuşhan M. C. (Editor), Sofuoğlu M. A. (Editor) Springer Nature, Zürich, 2022
A Numerical Study on Thermal and Electrical Performance of Prismatic Li-Ion Batteries and Estimation on Artificial Neural Networks Yetik Ö. in: New Frontiers in Sustainable Aviation, T. Hikmet Karakoc,Can Ozgur Colpan,Alper Dalkiran, Editor, Springer, London/Berlin , Berlin, pp.1-17, 2022
Aluminum-Lithium Alloys in Aircraft Structures Kaya E., Sheıkhı M. R., Gürgen S., Kuşhan M. C. in: Materials, Structures & Manufacturing for Aircraft, Melih Cemal Kuşhan,Selim Gürgen,Mehmet Alper Sofuoğlu, Editor, Springer Nature, Zürich, pp.1-25, 2022
Green Applications with an Advanced Manufacturing Method: Cold Spray Deposition Technology Kılıçay K., Dayı S. C., Kaya E., Gürgen S. in: Advanced Manufacturing Methods: Smart Processes and Modeling for Optimization, Catalin Pruncu,Jamal Zbitou, Editor, CRC, New York , New York, pp.28-56, 2022
Green Applications with an Advanced Manufacturing Method: Cold Spray Deposition Technology KILIÇAY K., DAYI S. C., KAYA E., GÜRGEN S. in: Advanced Manufacturing Methods Smart Processes and Modeling for Optimization, Catalin I. Pruncu, Jamal Zbitou, Editor, CRC Press, Boca Raton, pp.27-56, 2022
Structural health monitoring method for in situ inspection of landing gears Haydarlar G., Tekkalmaz M., Sofuoğlu M. A. in: Materials, structures and manufacturing for aircraft, Melih Cemal Kuşhan,Selim Gürgen,Mehmet Alper Sofuoğlu, Editor, Springer Nature, Basel, pp.211-238, 2022
Smart Bioceramics for Orthopedic Applications YASA E., Depboylu F. N., KORKUSUZ P., KORKUSUZ F. in: Innovative Bioceramics in Translational Medicine II, Choi A.H., Ben-Nissan B., Editor, Springer, pp.157-186, 2022
The Importance of Hydraulic Systems in the Machinery Manufacturing Industry Ergür H. S. in: Innovative Technology Applications in Engineering Sciences, Prof. Dr. Rakesh Jain,Prof. Dr. Abdülkadir Güllü,Assist Prof. Senai Yalçınkaya, Editor, Güven Plus Group Inc. Publications, İstanbul, pp.249-269, 2022
Hidrolik Sistemlerde Aşırı Isınmanın Analizi Ergür H. S. in: Malzeme Teknolojisi ve Tasarım Bilimlerine Yeni Yaklaşımlar, Prof. Dr. Yusuf ŞAHİN,Dr. Öğr. Üye. Senai YALÇINKAYA, Editor, GÜVEN PLUS GRUP DANIŞMANLIK A.Ş. YAYINLARI, İstanbul, pp.289-317, 2021
Wear behavior of UHMWPE: A case study of gas spring Gürgen S., Sert A., Kuşhan M. C. in: Tribology and Surface Engineering for Industrial Applications, Catalin Pruncu,Amit Aherwar, Editor, CRC, New York , New York, pp.1-34, 2021
Chapter 3 - Selective laser melting: principles and surface quality YASA E. in: Handbooks in Advanced Manufacturing, Additive Manufacturing, Juan Pou, Antonio Riveiro, J. Paulo Davim, Editor, Elsevier, pp.77-120, 2021
Fundamentals of Alcohol Fuel Cells AKİN M., ERDURAN V., ALTUNER E. E., TİMURALP Ç., IŞIK İ., ŞEN F. in: Nanomaterials for Direct Alcohol Fuel Cells, Şen, Fatih, Editor, Elsevier, Cambridge, pp.75-94, 2021
Advancements in conventional machining: A case of vibration and heat-assisted machining of aerospace alloys Gürgen S., Sofuoğlu M. A. in: Advanced Machining and Finishing, Kapil Gupta,Alokesh Pramanik, Editor, Elsevier Science, Oxford/Amsterdam , Oxford, pp.1-31, 2021
Porous Metal Materials for Polymer Electrolyte Membrane Fuel Cells AYDIN ÜNAL F., TİMURALP Ç., ERDURAN V., ŞEN F. in: Nanomaterials for Direct Alcohol Fuel Cells, Şen, Fatih, Editor, Elsevier, Cambridge, pp.187-208, 2021
Nanomaterials and Their Classification Alkaç İ. M., ÇERÇİ B., TİMURALP Ç., ŞEN F. in: Nanomaterials for Direct Alcohol Fuel Cells, Şen, Fatih, Editor, Elsevier, Cambridge, pp.17-33, 2021
Fabrication and Properties of Polymer Electrolyte Membranes (PEM) for Direct Methanol Fuel Cell Application AYDIN ÜNAL F., ERDURAN V., TİMURALP Ç., ŞEN F. in: Nanomaterials for Direct Alcohol Fuel Cells, Şen, Fatih, Editor, Elsevier, Cambridge, pp.283-302, 2021
İskelet sisteminde kullanılan biyomalzemeler ve vücudun biyomalzemelere yanıtı Depboylu F. N., KORKUSUZ P., YASA E., KORKUSUZ F. in: Üst Ekstremite, Yaralanmalarında Rehabilitasyon, Tunay V, Erden Z, Yıldız C., Editor, Hipokrat Yayınevi, Ankara, pp.38-49, 2021
Bor Nitrür AY N., GÖNCÜ Y., AY G. M. in: Bor ve Malzeme Bilimi, Prof. Dr. Zafer EVİS, Editor, Boren Yayınları, Ankara, pp.1-90, 2020
Tasarım ve İmalat Yasa E. (Editor) Intech Open, London, 2020
Bileşik Isı Güç Sistemleri, Otoprodüktör Uygulaması ARAS H. in: Elektrik Enerjisi, Üretimi, İletimi ve Dağıtımı, Süleyman Demir, Editor, Anadolu Üniversitesi Basımevi, Eskişehir, pp.190-213, 2020
Powder Bed Fusion Additive Manufacturing of Ni-Based Superalloys: Applications, Characteristics, and Limitations YASA E., POYRAZ Ö. in: Additive Manufacturing Applications for Metals and Composites, K.R. Balasubramanian, V. Senthilkumar, Editor, IGI Global, Pennsylvania, pp.249-270, 2020
Vantilatörler Ergür H. S. in: Mühendislik Alanında Akademik Araştırmalar, Doç. Dr. Özdoğan KARAÇALI, Editor, Duvar Yayınları, İzmir, pp.9-49, 2020
Pseudo Programlar ile Sayısal Analiz ALTAÇ Z. DORA BASIM-YAYIM DAĞITIM LTD ŞTİ, Bursa, 2019
Enerji Talep Tahmin Yöntemleri ARAS H. in: Enerji Yönetimi ve Politikaları, Murat Tanışlı, Yüksel Ergün, Editor, Anadolu Üniversitesi Basımevi, Eskişehir, pp.151-168, 2018
Additive Manufacturing of Polymer Matrix Composites Yasa E. in: Uçak Teknolojisi (Aircraft Technology), Melih Kushan, Editor, Intech Open, London, pp.147-169, 2018
Enerji Yoğun Sanayi Sektörleri ARAS H. in: Enerji Yönetimi ve Politikaları, Murat Tanışlı, Yüksel Ergün, Editor, Anadolu Üniversitesi Basımevi, Eskişehir, pp.81-96, 2018
AKIŞKANLAR MEKANİĞİNE GİRİŞ Yücel N., Dinler N., Türkoğlu H., Altaç Z. Nobel Yayın Dağıtım, Ankara, 2018
Enerji Yatırım Modelleri ARAS H. in: Enerji Yönetimi ve Politikaları, Murat Tanışlı, Yüksel Ergün, Editor, Anadolu Üniversitesi Basımevi, Eskişehir, pp.131-148, 2018
Tüekiye’de ve Avrupa Birliği Ülkelerinde Enerji Yönetim Politikalarının Karşılaştırılma ARAS H. in: Enerji Yönetim ve Politikaları, Murat Tanışlı, Yüksel Ergün, Editor, Anadolu Üniversitesi Basımevi, Eskişehir, pp.171-193, 2018
Akademik Araştırmalar için Bilişim Araçları Ay G. M. Eskişehir Osmangazi Üniversitesi Basımevi, Eskişehir, 2017
Comprehensive Study of Compact Heat Exchangers with Offset Strip Fin Erbay L. B., Öztürk M. M., Doğan B. in: Heat Exchangers - Advanced Features and Applications, S. M. Sohel Murshed and Manuel Matos Lopes, Editor, InTechOpen, London, pp.31-59, 2017
Comprehensive Study of Heat Exchangers with Louver Fins Erbay L. B., Doğan B., Öztürk M. M. in: Heat Exchangers - Advanced Features and Applications, S. M. Sohel Murshed and Manuel Matos Lopes, Editor, InTechOpen, London, pp.61-92, 2017
Değişken Yüklemedeki Yorulma Hatası (6. Bölüm) Miller ve Bileşenleri (7. Bölüm) Vidalar, Bağlayıcılar ve Sabit Olmayan Bağlantılar (8. Bölüm) Kaynak, Birleştirme ve Sabit Bağlantıların Tasarımı (9. Bölüm) Mekanik Yaylar (10. Bölüm) Yuvarlanma Temaslı Yataklar (11. Bölüm) Esnek Makine elemanları (17. Bölüm) Güç İletimii Durum Çalışması (18. Bölüm) İstatistiksel Yaklaşımlar (20. Bölüm) ERGÜR H. S., PANCAR Y. in: Shigley’den Makine Mühendisliğinde Tasarım, H. Sevil Ergür ve Yaşar Pancar, Editor, Literatür Yayıncılık, İstanbul, pp.258-977, 2016
A dan Z ye Dünya Uçakları Helikopterleri ve İnsansız Hava Araçları KUŞHAN M. C., GÜRGEN S. Nisan Kitabevi, Eskişehir, 2016
Taşımacılık Düzenlemeleri ARAS H. in: Ulaştırma Sistemleri, Doç.Dr.Nil Aras, Editor, Anadolu Üniversitesi, Eskişehir, pp.174-197, 2016
Ünite:6 Dalga Enerjisi ERBAY L. B. in: Yenilenebilir Enerji Kaynakları, Prof. Dr. Ertuğrul Yörükoğulları, Editor, Anadolu Üniversitesi, pp.130-157, 2016
Deniz ve Su Yolu Taşımacılığı ARAS H. in: Ulaştırma Sistemleri, Doç.Dr.Nil Aras, Doç.Dr. Ender Gerede, Editor, Anadolu Üniversitesi, Eskişehir, pp.106-129, 2016
Bileşik Isı ve Güç Üretimi, Otoprodüktör Uygulaması ARAS H. in: Elektrik Enerjisi Üretimi, Prof.Dr.Süleyman Demir, Editor, Anadolu Üniversitesi, Eskişehir, pp.166-189, 2016
Ünite 4: Nükleer Santraller ERBAY L. B. in: Elektrik Enerjisi Üretimi ve Dağıtımı, Prof. Dr. Süleyman Demir, Editor, Anadolu Üniversitesi, pp.64-89, 2016
Hidroelektrik Enerji Santralleri ARAS H. in: Elektrik Enerjisi Üretimi, Prof.Dr.Süleyman Demir, Editor, Anadolu Üniversitesi, Eskişehir, pp.90-113, 2016
Glossary of Engineering Thermodynamics ERBAY L. B. ESOGÜ Yayınevi, Eskişehir, 2015
6) Değişken Yüklemedeki Yorulma Hatası 7) Miller ve Mil Bileşenleri 8) Vidalar, Bağlayıcılar ve Sabit Olmayan Bağlantılar 9) Kaynak, Birleştirme ve Sabit Bağlantıların Tasarımı 10) Mekanik Yaylar 11) Yuvarlanma Temaslı Yataklar 17) Esnek Makine Elemanları 18) Güç İletimi Durum Çalışması 20) İstatistiksel Yaklaşımlar ERGÜR H. S., PANCAR Y. in: Shigley’den Makine Mühendisliğinde Tasarım, H. Sevil Ergür, Yaşar Pancar, Editor, Literatür Yayıncılık, İstanbul, pp.257-982, 2015
Fatigue Failure in Aircraft Structural Components GÜRGEN S., KUŞHAN M. C., seyid F d. in: Handbook of Materials Failure Analysis With Case Studies from the Aerospace and Automotive Industries, Abdel Salam Hamdy Makhlouf, Mahmood Aliofkhazraei, Editor, Elsevier, Waltham, pp.261-276, 2015
Wireless Eddy Current Probe Prototype and Monitor Design and Aircraft Maintenance Applications gode e., KUŞHAN M. C., ÇEVİK S. in: Advances in Applied Materials and Electronics Engineering III, Brendan Gan, Y. Gan, Y. Yu, Editor, TTP, Zürich, pp.448-451, 2014
Potential of MoSi2 and MoSi2-Si3N4 Composites for Aircraft Gas Turbine Engines KUŞHAN M. C., UZUNONAT Y., ÇEVİK S., DİLTEMİZ S. F. in: Recent Advances in Aircraft Technology, Agarwal Ramesh K., Editor, InTech, pp.97-115, 2012
Potential of MoSi2 and MoSi2-Si3N4 Composites for Aircraft Gas Turbine Engines KUŞHAN M. C., UZUNONAT Y., ÇEVİK S., diltemiz s. F. in: Recent Advances in Aircraft Technology, Ramesh K. Agarwal, Editor, INTECH, Zagrep, pp.97-116, 2012
ALLVAC 718 Plus Superalloy For Aerospace Applications KUŞHAN M. C., ÇEVİK S., UZUNONAT Y., fehmi d. in: Recent Advances in Aircraft Technology, Ramesh K. Agarwal, Editor, INTECH, Zagrep, pp.75-96, 2012
Allvac 718 Plus Superalloy for Aircraft Engine Applications KUŞHAN M. C., ÇEVİK S., UZUNONAT Y., DİLTEMİZ S. F. in: Recent Advances in Aircraft Technology, Agarwal Ramesh K., Editor, InTech, pp.75-96, 2012
Thermal spray coatings for aeronautical and aerospace applications Li C., Yang G., Altun Ö. in: Aerospace Materials Handbook, S Zhang,D Zhao, Editor, CRC, New York , Florida, pp.281-359, 2012
a'DAN z'ye Dünya Uçakları ve Helikopterleri Kuşhan M. C. Nisan Yayınları, Ankara, 2004
Mukavemet Problemleri PAR B., ORAK S. ETAM, Eskişehir, 1995
Refereed Congress / Symposium Publications in Proceedings
Triz ve makina mühendisliğinde uygulamaları Sofuoğlu M. A. ICIAS 2024, Konya, Turkey, 12 - 13 March 2024, pp.1-10
Yardımcı iniş takımının ANSYS Workbench ile statik ve modal analizi Güngör M., Sofuoğlu M. A. ICIAS 2024, Konya, Turkey, 12 - 13 March 2024, pp.1-10
A study on battery management systems in the application of aviation engines Sarana G., Yetik Ö., Karakoç T. H. ISUDEF24, Baku, Azerbaijan, 22 - 24 May 2024, pp.1-12
Model Uçak Aerodinamik Analizinde Düşük Mertebeli Aerodinamik Çözücülerin Karşılaştırılması Akçan M., Öznalbant Z., Timuralp Ç. 10. Ulusal Havacılık ve Uzay Konferansı, Ankara, Turkey, 18 - 20 September 2024, no.57, pp.1-25
Akıllı kaynak sistemlerine yönelik araştırma Ayyıldız K., Sofuoğlu M. A. ICFAR 2024, Konya, Turkey, 15 - 16 June 2024, pp.1-10
Factors Effective in Landing Gear Type Selection for Fixed Wing Unmanned Aerial Vehicles: A Review DİKİLİTAŞ B., YILMAZ S. 5th International Azerbaijan Congress on Life, Engineering, and Applied Sciences, Baku, Azerbaijan, 24 - 26 January 2024, pp.177-178
SLM ile Üretilmiş Inconel 718’in Mikroyapısal ve Tribolojik Özelliklerine Isıl İşlemin Etkisinin Araştırılması Arf B., Kılıçay K., Dayı S. C. 3 INTERNATIONAL MATERIALS ENGINEERING AND ADVANCED MANUFACTURINGTECHNOLOGIES CONGRESS (IMEAMTC'24), İstanbul, Turkey, 20 - 21 January 2024, pp.304
Microstructural and Hardness Behaviour Evaluation of Zinc Borate Reinforcement on Ultra‐High Molecular Weight Polyethylene Kaya E. 7. Uluslararası Mühendislik Bilimleri Ve Multidisipliner Yaklaşımlar Kongresi, İstanbul, Turkey, 25 May 2024, pp.175-182
A study on the contributions of phase change material in battery cooling processes in thermal management Akpınar C., Yetik Ö., Karakoç T. H. ISUDEF24, Baku, Azerbaijan, 22 - 24 May 2024, pp.1-12
Bir Rüzgar Enerji Santralinin Üretim Değerlerinin Analizi Doğan F., Timuralp Ç. 13. Uluslararası Mühendislik Mimarlık ve Tasarım Kongresi, İstanbul, Turkey, 8 - 09 June 2024, pp.285-291
Talaşlı imalatta mantar kompozitlerinin titreşim sönümleyici olarak kullanılmasının araştırılması Bulgurcu M., Recepoğlu H., Sürek Z. S., Sofuoğlu M. A. ICSIS 2024, Konya, Turkey, 11 - 12 September 2024, pp.1-10
Investigation of sustainable machining for Ti6Al7Nb alloy using ultrasonic vibration assisted nano-graphene based MQL Duman E., Yapan Y. F., Sofuoğlu M. A., Uysal A. UTIS 2024, Antalya, Turkey, 01 November 2024, pp.1-10
Türkiye'de 2019‐2023 Yılları Arasında Yaşanan İş Kazası ve Meslek Hastalığı Sayılarının Coğrafi Bölgelere Göre Dağılımı Ilgın M. C., Timuralp Ç. 10. Uluslararası İş Güvenliği ve Çalışan Sağlığı Kongresi, İstanbul, Turkey, 05 October 2024, pp.159-167
Otomasyon Sistemlerinde Kullanılan Raylı Sistem Tekerinin Sonlu Elemanlar Yöntemi ile Analizi Timuralp Ç., Şengüler Y. 7. Uluslararası Mühendislik Bilimleri ve Multidisipliner Yaklaşımlar Kongresi, İstanbul, Turkey, 25 - 26 May 2024, pp.436-442
Experimental Thermal Analysis of Cylindrical LFP Batteries Demir F. N., Abdurakhmonzoda K., Yetik Ö., Karakoç T. H. ISSA24, Belgrade, Serbia, 30 October - 01 November 2024, pp.1-12
Havacılık aksesuar dişli kutusu dişli eniyilemesinin dişli kontağına ve doğal frekansına etkileri Mert H., Sofuoğlu M. A. 3. ULUSLARARASI BOĞAZİÇİ BİLİMSEL ÇALIŞMALAR KONGRESİ, İstanbul, Turkey, 20 - 21 January 2024, pp.1-10
Thermal Behavior and Performance Analysis of Lfp Batteries Under Different Current Rates Demir F. N., Yalçın H., Abdurakhmonzoda K., Yetik Ö., Karakoç T. H. ISATECH24, Thanh-Pho-Ho-Chi-Minh, Vietnam, 27 - 29 August 2024, pp.1-12
Investigation of tribological properties of polymer grease manufactured from poly alpha olefin with boron nitride Bayar A., Ay G. M. BALTTRIB, Vilniaus, Lithuania, 22 - 24 September 2022, pp.1-5
Hava araçları aydınlatma sistemlerinin üretiminde karşılaşılan sorunlar ve çözüm önerileri KAYA Y., SOFUOĞLU M. A. ICMAR, Turkey, 29 - 31 July 2023
PREDICTIVE APPROACH TO ENGINE MAINTENANCE AND DETERMINING THE IMPORTANT CHARACTERISTICS OF ENGINE OIL Bektaş S., Tat M. E. 14TH INTERNATIONAL ISTANBUL SCIENTIFIC RESEARCH CONGRESSES ON LIFE, SOCIAL, AND HEALTH SCIENCES AUGUST 26-28, 2023\|İSTANBUL, TÜRKİYE ONLINE & IN-PERSON PARTICIPATION, İstanbul, Turkey, 26 - 28 August 2023, pp.160-161
Titreşim izolasyonunda kullanılan malzemelerin titreşim karakteristiklerinin araştırılması SOFUOĞLU M. A. ICENSOS, Turkey, 4 - 06 April 2023
CFD Analysis of Aircraft Wheel Washing Machine Akdağ I., Gözüyılmaz G., Yetik Ö., Pekacar M., Ayar M., Kaplan B., et al. ISATECH'23, Ha-Noi, Vietnam, 24 - 26 August 2023, pp.1-5
Dynamic Analysis of Tree Branch Shaker Machine YILMAZ S., ÖZTÜRK B. 2nd International Izmir Congress on Life Engineering and Applied Sciences, İzmir, Turkey, 14 - 16 October 2023, pp.103
Havacılık alaşımlarının talaşlı işlenmesinin mikrosertlik açısından incelenmesi SOFUOĞLU M. A., HAYDARLAR G., TEKKALMAZ M. 4th International Mediterranean Congress, Turkey, 15 - 16 June 2023
Bir dişli kutusu gövdesinin yapısal ve modal analizi Beyazşekeroğlu T., Yener F., Güleryüz A., SOFUOĞLU M. A. 9. Uluslararası Mühendislik ve Teknoloji Yönetimi Kongresi, Turkey, 29 April - 01 May 2023
The Analytical Calculation of Hertz Contact Pressure for the ASTM G99 Type Wear Test KAYA E. 6th International Iron and Steel Symposium (UDCS'23), Karabük, Turkey, 11 May - 12 June 2023
Elektrikli İtki Sistemine Sahip İnsansız Deniz Araçlarında Pervanede Oluşan Fiziksel Hasarların Yataklardan Ölçülen İvme ile Belirlenebilirliği BAYIR A. O., YILMAZ S. 1.Bilsel Uluslararası Ahlat Bilimsel Araştırmalar Kongresi, Bitlis, Turkey, 15 - 16 August 2023, pp.464-466
Talaşlı imalatta EMES analizi: Kalıntı gerilme analizine derinlemesine bir bakış HAYDARLAR G., SOFUOĞLU M. A., TEKKALMAZ M. 2. International Cankaya Scientific Studies Congress, Turkey, 28 - 29 September 2023
Design and Implementation of Experimental Setup for Performance Measurement of Battery Powered Screwdriver Tools ÖZTÜRK B., YILMAZ S. 2nd International Izmir Congress on Life Engineering and Applied Sciences, İzmir, Turkey, 14 - 16 October 2023, pp.102
Investigation of Microstructural and Tribological Properties of Different Atmospheric Plasma Spray Coatings Çakar B., KILIÇAY K., DAYI S. C. 15th International Istanbul Scientıfıc Research Congress on Life, Engineering, and Applied Sciences, İstanbul, Turkey, 9 - 11 December 2023
Possible Problems with Multi-DOF Force/Torque Sensor Designed and Built Using Cost-Effective Load Cells ÖZTÜRK B., YILMAZ S. 3rd Global Conference on Engineering Research (GLOBCER'23), Bandırma, Turkey, 13 - 16 September 2023, pp.524-525
Havacılık endüstrisi için alternatif malzemeler:Mantar kompozitler SOFUOĞLU M. A. ICENSOS, Turkey, 4 - 06 April 2023
Evaluation of Critical Factors in Mechanically Extrusion Based Syringe Driver System Design for 3D Bioprinters ÖZTÜRK B., YILMAZ S. 3rd Global Conference on Engineering Research (GLOBCER'23), Bandırma, Turkey, 13 - 16 September 2023, pp.522-523
Uzay Uydularında Kullanılan Li-Ion Batarya Gereksinimleri Guliyeva Z., YETİK Ö., KARAKOÇ T. H. ISSRIS23, 15 March 2023
Optimizing Formula 1 rear wings with NACA series airfoils for maximum performance Sarucan F., SOFUOĞLU M. A. 9. Uluslararası Mühendislik ve Teknoloji Yönetimi Kongresi, Turkey, 29 April - 01 May 2023
Micromechanical Evaluation of the Plasma Assisted Hard Facing Metal Matrix Composite Coatings KAYA E. 3thInternational Congress of Engineering and Natural Sciences, Konya, Turkey, 24 - 25 May 2023
Effect of Condenser Fan Speed on the Energy Consumption of a Household Refrigerator Özbek M., DOĞAN B. Uluslararası Katılımlı 23. Isı Bilimi ve Tekniği Kongresi, ULIBTK’24, Ankara, Turkey, 06 September 2023
Farklı malzemelerin elektron ışın kaynağı altında doldurulmasına yönelik araştırma: Kısa bir derleme KILIÇ A., SOFUOĞLU M. A. International Euroasia Congress on Scientific Researches and Recent Trends, Turkey, 29 - 30 November 2023
Serpantin Tipi Bir Isı Değiştiricinin Isıl Performansının Analitik, Sayısal ve Deneysel İncelenmesi Çelik H. S., DOĞAN B., ERBAY L. B. 15. Ulusal Tesisat Mühendisliği Kongresi, İzmir, Turkey, 26 April 2023, pp.1-17
Bir Isı Çukurunda Düşük Reynolds Sayılarında Isıl Performansın İncelenmesi KOŞDERE Ö., ALTUN Ö., SERT Z. 10th International Congress on Engineering And Technology Management, İstanbul, Turkey, 14 - 15 October 2023, pp.364-370
Soğutucu Akışkan Olarak R744 Kullanılan Soğutma Sistemlerine Genel Bakış ALTUN Ö. 6th International Congress on Engineering Sciences and Multidisciplinary Approaches, İstanbul, Turkey, 2 - 03 December 2023, pp.485-492
The Determination of Microstructural and Mechanical Properties of Surface Alloyed Cold Work Tool Steels KAYA E. 6th International Iron and Steel Symposium (UDCS'23), Karabük, Turkey, 11 - 12 May 2023
Investigation of tribological properties of polymer grease manufactured from palm ester with boron nitride and poly alpha olefin with boron nitride Bulutcu Y. H., Bayar A., Ay G. M. BALTTRIB, Vilniaus, Lithuania, 22 - 24 September 2022, pp.12-16
Plazma Transferli Ark Kaynak Tekniği ile Yüzey Özellikleri Geliştirilmiş Ti6Al4V Alaşımının Mikroyapısal ve Mekanik Özelliklerinin İncelenmesi GÜLEÇ T., KILIÇAY K., KAYA E. 10th International Congress on Engineering and Technology Management, İstanbul, Turkey, 14 - 15 October 2023
Tekneler için Elektrikli İtki Sistemi Dizaynında Şaft Uzunluğu ve Yatak Sayısının Titreşim Karakteristiği Üzerindeki Etkisinin Sonlu Elemanlar Metodu ile Tespiti BAYIR A. O., YILMAZ S. 1.Bilsel Uluslararası Ahlat Bilimsel Araştırmalar Kongresi, Bitlis, Turkey, 15 - 16 August 2023, pp.461-463
Mikro İşlemcilerde Kullanılan Isı Kuyuları KOŞDERE Ö., SERT Z., ALTUN Ö. 10th International Congress on Engineering And Technology Management, İstanbul, Turkey, 14 - 15 October 2023
Isı Çukurundaki İki Farklı Kanatçık Tipinin Termal Performanslarının Karşılaştırılması SERT Z., ALTUN Ö. Ege 10th International Conference On Applied Science, İstanbul, Turkey, 22 - 24 December 2023, vol.1, pp.105-114
STRATEGIES TO IMPROVE TRIBOLOGICAL PROPERTIES OF SILICON CARBIDE BAŞKUT S., SERT A. 10TH INTERNATIONAL ISTANBUL SCIENTIFIC RESEARCH CONGRESS, İstanbul, Turkey, 23 July 2022, pp.405-409
Non-Newtonian Steady Flow Fluids over a Pair of Grooved Cylinders in Tandem Arrangement Becheffar Y., Ergür H. S. 6th International New York Conference on Evolving Trends in Interdisciplinary Research & Practices, New York, United States Of America, 3 - 05 April 2022, pp.211
Al-7075 alaşımının talaşlı işlenmesinde titreşim parametrelerinin yapısal sağlık izleme ile takibi ÇOBAN U., PARLAKTAŞ A., SANDUVAÇ E., ANAMASLI H., RAGİMOV Y., HAYDARLAR G., et al. 3. Uluslararası İstanbul Modern Bilimsel Araştırmalar Kongresi, Turkey, 6 - 08 May 2022
Batarya Destekli Elektrikli Vidalama Aletlerinin Matlab Simscape Kütüphanesi Kullanılarak Dinamik Analizi ÖZTÜRK B., YILMAZ S. 3. Uluslararası Mühendislik Bilimleri ve Multidisipliner Yaklaşımlar Kongresi, İstanbul, Turkey, 10 - 11 February 2022, pp.747
4D baskıda katmanlı üretim ortamı ve malzeme perspektifi Erdem B., SOFUOĞLU M. A. 3rd International Conference on Applied Engineering and Natural Sciences, Konya, Turkey, 20 - 23 July 2022
UÇAK MOTOR BAKIMINDA YAĞ SİSTEM ELEMANLARINDAKİ HASARLARIN ERKEN TESPİTİ AMACIYLA KULLANILAN MANYETİK ÇİP DEDEKTÖRLER Diltemiz S. F., Altun Ö. INTERNATIONAL MAINTENANCE TECHNOLOGIES CONGRESS AND EXHIBITION, Denizli, Turkey, 20 - 22 October 2022, pp.351-358
Plastik enjeksiyonda yabancı leke hatasının incelenmesi ve iyileştirilmesi DÖNMEZ D., SOFUOĞLU M. A. 3. Uluslararası İstanbul Modern Bilimsel Araştırmalar Kongresi, Turkey, 6 - 08 May 2022
Recent developments and future trends in micro-milling tools and coatings SOFUOĞLU M. A., GÜRGEN S. IV. International Turkic World Congress on Science and Engineering, Niğde, Turkey, 23 - 24 June 2022
Natural Convection of Single-Walled Carbon Nanotube in Grooved Square Cavity Becheffar Y., Abdı M., Maturi D. A. A., Ergür H. S. BASKENT 2nd International Conference on Multidisciplinary Studies, Ankara, Turkey, 24 - 25 February 2022, pp.187
Hidrodinamik Kaymalı Yataklarda Yatak Kanal Tasarımlarının Yağlayıcı Performansına Etkileri Sayar M., Tat M. E. Xth INTERNATIONAL MAINTENANCE TECHNOLOGIES CONGRESS AND EXHIBITION (X. Uluslararası Katılımlı Bakım Teknolojileri Kongresi ve Sergisi), Denizli, Turkey, 20 - 22 October 2022, pp.230-237
Mechanical and Tribological Properties of Electroless Nickel Phosphorous Coating on Ti6Al4V Titanium Alloy SERT A., BAŞKUT S. 2nd Global Conference on Engineering Research, Balıkesir, Turkey, 07 September 2022, pp.425
Inconel 718 malzemesinin işlenebilirliği üzerine inceleme KILIÇ A., SOFUOĞLU M. A. 3rd International Conference on Applied Engineering and Natural Sciences, Konya, Turkey, 20 - 23 July 2022
Analysis of Energy Savings in Fans Ergür H. S. 5. International ICONTECH Symposium on Innovative Surveys in Positive Sciences, Şanlıurfa, Turkey, 5 February - 06 March 2022, pp.101-108
Uçak Motor Bakımında Yağ Sistem Elemanlarındaki Hasarların Erken Tespiti Amacıyla Kullanılan Manyetik Çip Dedektörler DİLTEMİZ S. F., ALTUN Ö. X. Uluslararası Katılımlı Bakım Teknolojileri Kongresi ve Sergisi, Denizli, Turkey, 20 - 22 October 2022
Application of novel criteria weighting methods in manufacturing environment SOFUOĞLU M. A. ICSAR 2022, Turkey, 10 - 13 December 2022
Effect of the Porous Surface on the Average Nusselt Number of Forced Convection Heat Transfer Around a Cyclinder Becheffar Y., Maturi D. A. A., Ergür H. S. 7th International Zeugma Conference on Scientific Research, Gaziantep, Turkey, 21 - 23 January 2022, pp.564
An overview of the machinability of nickel-based superalloys with micro-textured cutting tools Yaman M. Ö., Er Ü. International Symposium on Aircraft Technology, MRO & Operations 2021, 28 - 30 June 2021, pp.52
Parametric Simulations for Residual Stresses and Distortions of Inconel 625 Fabricated by Laser Powder Bed Fusion Additive Manufacturing POYRAZ Ö., YASA E., TUNÇ L. T., KILIÇAY K. AMC TURKEY 2021, İstanbul, Turkey, 9 - 10 September 2021
Synchronization of Hydraulic Controlled Cyclinders Ergür H. S. 3. Uluslararası Palandöken Bilimsel Çalışmalar Kongresi, Erzurum, Turkey, 11 - 12 December 2021, pp.447-460
ARAMID fabrics used as ballistic plate for army KUŞHAN M. C., GÜRGEN S., SOFUOĞLU M. A. 8th International Fiber and Polymer Research Symposium, Turkey, 18 - 19 June 2021
Maksillofasiyal ve El Cerrahisi için Cp-Ti İmplantların Üretiminde Lazer Metal Toz Ergitme (LAM) Teknoloji Platformunun Geliştirilmesi DEPBOYLU F. N., YASA E., KORKUSUZ F., POYRAZ Ö. BİOMED 2021-TR, 18 December 2021
The Selective Laser Melting Process Development of 17-4 PH Stainless Steels with Pulsed-wave Lasers YASA E., ÖZSOY A., TÜREYEN E. B. 32. Annual Int. Virtual Solid Freeform Fabrication Synposium, United States Of America, 2 - 04 August 2021
On the Z-Dimensional Accuracy of L-Powder Bed Fusion YASA E., Kandemir İ., ATİK İ. AMC TURKEY 2021, İstanbul, Turkey, 09 September 2021
Mikro frezelemede son gelişmeler ve gelecekteki eğilimler GÜRGEN S., SOFUOĞLU M. A. 7. Uluslararası Mühendislik Mimarlık ve Tasarım Kongresi, Turkey, 21 - 22 May 2021
Enerji Tasarruflu Hidrolik Devre Uygulamaları Ergür H. S. 7. Uluslararası Mühendislik Mimarlık ve Tasarım Kongresi, İstanbul, Turkey, 21 - 22 May 2021, pp.324-336
Development of a 3D Full Body Kinematic Model for the Human Skeletal System Yanıkören M., Yılmaz S., Gündoğdu Ö. Congress on Movement and Motor Control, Eskişehir, Turkey, 21 - 25 May 2021, pp.52-53
YENİLENEBİLİR ENERJİ YATIRIMLARINDA KULLANILAN KARAR KRİTERLERİNİN ANALİZİ Karabulut G. Y., ARAS H. 23rd Congress on Thermal Science and Technology with International Participation, Gaziantep, Turkey, 08 September 2021, pp.673-686
Creating and Realizing 3D Human Body Dynamic Model for Biomechanical Applications Yanıkören M., Yılmaz S., Gündoğdu Ö. Congress on Movement and Motor Control, Eskişehir, Turkey, 21 - 25 May 2021, pp.50-51
Manyetik yardımlı tornalama işleminin deneysel olarak araştırılması YILMAZ E., ÇAKIR F. H., SOFUOĞLU M. A. 6. Uluslararası Mühendislik ve Teknoloji Yönetimi Kongresi, Turkey, 20 November 2021
COMPOSITE LIGHTWEIGHT ARMOR DESIGN ATLERNATIVES FOR HELICOPTERS Kuşhan M. C., Çetin B., Tonbul K., Teoman A., Göde E. V. International Ege Composite Materials Symposium, Antalya, Turkey, 4 - 06 November 2021, vol.1, no.1, pp.25-29
Experimental Air-Cooled Battery Thermal Management Approach TARHAN B., YETİK Ö., KARAKOÇ T. H. TUBA WCEST-2021, İstanbul, Turkey, 8 - 12 August 2021
Role of friction in pull-out forces of textiles GÜRGEN S., SOFUOĞLU M. A. 5. Uluslararası Mühendislik ve Teknoloji Yönetimi Kongresi, Turkey, 24 - 25 April 2021
Covid-19 ile mücadelede 3B katmanlı imalat simülasyonlarının değerlendirilmesi USTA İ. B., SOFUOĞLU M. A. 6. Uluslararası Mühendislik ve Teknoloji Yönetimi Kongresi, Turkey, 20 November 2021
EFFECT OF UHMWPE COATING ON THE TRIBOLOGICAL BEHAVIOR OF A LASER TEXTURED STEEL SERT A., GÜRGEN S. 6th International Conference on Advances in Mechanical Engineering, İstanbul, Turkey, 20 October 2021, pp.1338-1341
Effect of Spiral Position of The Diabatic Capillary Tube on The Performance of a Vertical Freezer TOSUN T., DOĞAN B., ÖZTÜRK M. M., ERBAY L. B. Effect of Spiral Position of The Diabatic Capillary Tube on The Performance of a Vertical Freezer, South Africa, 25 July 2021, pp.712-717
INFLUENCE OF CRYOGENIC HEAT TREATMENT ON PERFORMANCE OF UNCOATED, ALCRN AND ALTIN CARBIDE CUTTING TOOLS IN MILLING OF TI6AL4V Demircan Y., Gemici S., SERT A., ULUTAN M., GAŞAN H. 6th International Conference on Advances in Mechanical Engineering, İstanbul, Turkey, 20 October 2021, pp.1541-1553
Kanal içerisinde yan yana yerleştirilmiş iki silindirden tümleşik taşınım ile ısı geçişi DEVİREN Ö., SERT Z., MAHİR N. 23rd Congress on Thermal Science snd Technology with Internation Participation, Gaziantep, Turkey, 8 - 10 October 2021
Bir Telli-Boru Tip Kondenserin Boru Adımı ve Geçiş Sayısının Dikey Bir Derin Dondurucunun Performansına Etkisi TOSUN T., ÖZTÜRK M. M., DOĞAN B., ERBAY L. B. Uluslararası Katılımlı 23. Isı Bilimi ve Tekniği Kongresi, ULIBTK21, Gaziantep, Turkey, 08 September 2021, pp.132-139
An Investigation on the Effect of Reuse and Recycling on Powder Characteristics in Electron Beam Melting YASA E., KARAŞOĞLU M., TAN E., GÜMÜŞ B., SÖYLEMEZ E., AKTAŞ K. IMMC 2021, Turkey, 10 June 2021
Investigation on the Performance of Al7075 Alloy Surface Repaired by Cold Spray Coating Technology Kılıçay K., Dayı S. C. The 5th International Conference on Material Engineering and Manufacturing (ICMEM 2021), Chiba, Japan, 16 April 2021
Biyomimetik Poröz Dental İmplant Tasarımı, İn-vivo ve İn-vitro Değerlendirilmesi: İn-vitro Ön Sonuçlar ODABAŞI F., ÖNDER M. E., TEKİN U., ATIL F., ÇULHAOĞLU A. K., YASA E. AÇBİD 14th International Online Congress, 07 May 2021
A Comparative and Experimental Study on the Effect of Heat Treatment Cycles for PBF Ti6Al4V KARAŞOĞLU M., YASA E., TAN E., YAĞMUR A. 32. Annual Int. Virtual Solid Freeform Fabrication Synposium, United States Of America, 2 - 04 August 2021
Magnetic Refrigeration Technology and Applications Zaim A., ARAS H. 5th International Anatolian Energy Symposium, Trabzon, Turkey, 24 May 2021, pp.647-654
Evaluation of Nanostructured Materials: PEM Fuel Cell Applications AYAR M., YETİK Ö., KARAKOÇ T. H. ISSA 2021, Bangkok, Thailand, 25 November 2021
Yeni polimer matris kompozitlerin işlenebilirliğinin incelenmesi GÜRGEN S., YAMAN C., KAYA M., DÖNMEZ D., ÜLGEN B., SOFUOĞLU M. A. 6. Uluslararası Mühendislik ve Teknoloji Yönetimi Kongresi, Turkey, 20 November 2021
Hidrolik Sistemlerin Dinamik Performansı Ergür H. S. 7. Uluslararası Mühendislik Mimarlık ve Tasarım Kongresi, İstanbul, Turkey, 21 - 22 May 2021, pp.567-581
Blower Use in Industry Ergür H. S. ISPEC 12th International Conference on Engineering & Natural Sciences, Bingöl, Turkey, 24 - 25 December 2021, pp.523-532
SUALTI MUHAREBE ARAÇLARINDA ALTERNATİF SOĞUTMA TEKNOLOJİSİ Zaim A., ARAS H. 3rd International Defense Industry Symposium, Kırıkkale, Turkey, 07 October 2021
Milling of dispersion hardened polymers GÜRGEN S., SOFUOĞLU M. A. 5. Uluslararası Mühendislik ve Teknoloji Yönetimi Kongresi, Turkey, 24 - 25 April 2021
Anti impact properties of smart cork composites GÜRGEN S., SOFUOĞLU M. A. 7. Uluslararası Mühendislik Mimarlık ve Tasarım Kongresi, Turkey, 21 - 22 May 2021
Tel Ark Katmanlı İmalat (TAKİ) Yötemi, Türkçe İsimlendirmeleri ve Farklı Malzemelerde Uygulamaları ÇAKIR E., BAYAR İ., ULUTAN M. 5. International Conference on Material Science and Technology in Cappadocia/TURKEY(IMSTEC 2020), Nevşehir, Turkey, 16 - 18 October 2020, pp.160-165
Investigation of Liquefied Natural Gas (LNG) Usage Instead of Diesel in Heavy Commercial Vehicles ERÇELİK B. B., DOĞAN B. 8th International Conference on Engineering and Natural Sciences, Ankara, Turkey, 12 - 14 June 2020, pp.212-223
Selection of Process Parameters on Wire Arc AdditiveManufacturing Waam of TI6AL4V ÇAKIR E., BAYAR İ., ULUTAN M. 4th International Conference on Engineering Technologies, ICENTE, Konya, Turkey, 19 - 21 November 2020, pp.350-354
Determination of Wire Arc Additive Manufacturing Parameters with Plasma Arc Welding BAYAR İ., ÇAKIR E., ULUTAN M. 5. International Conference on Material Science and Technology in Cappadocia/TURKEY (IMSTEC 2020), Nevşehir, Turkey, 16 - 18 October 2020, pp.105-107
Polimer kompozitlerin mikro işlenebilirliğinin incelenmesi: Bir literatür değerlendirmesi SOFUOĞLU M. A., GÜRGEN S. 4. Uluslararası Akdeniz Sempozyumu, 22 - 24 October 2020
Havacılık ve uzay uygulamalarında sürdürülebilir ve çevre dostu mantar kompozitleri:ECOCORK projesi SOFUOĞLU M. A., GÜRGEN S. 4. Uluslararası Akdeniz Sempozyumu, 22 - 24 October 2020
Numerical Analysis of Transient Turbulent Flow in Domical Roofed Structures UĞURLUBİLEK N., ALTAÇ Z. 3rd INTERNATIONAL CONFERENCE on MATHEMATICAL ADVANCES and APPLICATIONS (ICOMAA2020), Turkey, 24 June 2020
Investigation of the Effect of Different Process Parameters on the Machinability of Ti6Al4V Alloy By Finite Element Method KAYA E., KILIÇAY K. 3. International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology , IMSMATEC’20, (Online Sempozyum), 24 - 26 June 2020
On the Use of Inherent Strain Method for Modelling Electron Beam Melting TAN E., YASA E., GÜMÜŞ B., SÖYLEMEZ E., AKTAŞ K. EBAM 2020, 5 - 07 October 2020
NUMERICAL ANALYSING HEAT TRANSFER PERFORMANCE AFFECTION OF TURBULATOR INVOLVEMENT IN A CIRCULAR PIPE INLET SURFACE FLOW Çelik Z., Çelik H. S., Uçar M. FIFTH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING: ICAME 2019, İstanbul, Turkey, 17 - 19 December 2019, vol.1, pp.333-341
Thermal Analysis of Parallel ConnectedLi-Ion Batteries for Hybrid Aircraft YETİK Ö., KARAKOÇ T. H., YILMAZ N. WCX SAE World Congress Experience, 21 - 23 April 2020
Experimental Investigation of Tribological Performance of Titanium–Zirconium–Molybdenum Alloy at Different Hertzian Contact Pressures KILIÇAY K. 3. Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, IMSMATEC’20, (Online Sempozyum), İstanbul, Turkey, 24 - 26 June 2020
Desıgnıng Of Battery Management System For Lıthıum Based Battery Packs Usıng At Electrıc Aırcraft TARHAN B., YETİK Ö., KARAKOÇ T. H. ISSA 2020, 9 - 12 November 2020
A review of textured cutting tools in manufacturing environment SOFUOĞLU M. A. 4. Uluslararası Mühendislik ve Teknoloji Yönetimi Kongresi, 13 - 14 November 2020
Deformation of STF Treated Spall Liners GÜRGEN S., KUŞHAN M. C. International Symposium on Aircraft Technology, Eskişehir, Turkey, 22 - 24 September 2020
Cooling Performance of Nanofluids for Battery Thermal Management YETİK Ö., KARAKOÇ T. H. ISEAS, 21 - 22 September 2020
Manyetik alanın imalat ve malzemeye etkileri üzerine literatür çalışması SOFUOĞLU M. A. 4. Uluslararası Mühendislik ve Teknoloji Yönetimi Kongresi, 13 - 14 November 2020
Temas Mekaniği Problemlerinin Sonlu Elemanlar Çözümlerinde Temas Kuvveti ve Temas Uzunluğu İlişkileri ARSLAN O. 4. Uluslararası Bilimsel Araştırmalar Kongresi, Yalova, Turkey, 14 - 17 February 2019
Thermal Analysis of Li-Ion Batteries With Cathode LIMN2O4 For Hibrit Aircraft YETİK Ö., KARAKOÇ T. H. ISSA 2019, 26 - 29 May 2019
Duvarında Sinüzoidal Sıcaklık Dağılımı Olan Kapalı Kutularda Doğal Taşınım ve TermalRadyasyon ile Isı Geçişinin İncelenmesi TEKKALMAZ M., HAYDARLAR G. 22. Isı Bilimi ve Tekniği Kongresi, 11 - 14 September 2019
Dünyada ve Ülkemizde Sivil Havacılık Bakım Onarım ve Yenileme (BOY) Faaliyetleri GÜRGEN S., SOFUOĞLU M. A., ÇAKIR F. H., KUŞHAN M. C. 9. Uluslararası Bakım Teknolojileri Kongresi ve Sergisi-BTKS, Denizli, Turkey, 26 - 28 September 2019, vol.1, pp.185-191
Comparison of different FEM software in terms of hot ultrasonic assisted machining technique SOFUOĞLU M. A., KUŞHAN M. C., ORAK S. 2nd International Conference on Materials Design and Application (ICMDA 2019), 13 - 15 April 2019
On the optimization of metal spatter sweeping in Selective Laser Melting Gürkan A. Y., Bursa M., YASA E., Öğüt E. AMCTURKEY Additive Manufacturing Conference, İstanbul, Turkey, 17 - 18 October 2019
Engel İçeren Kanallarda Isı Geçişine Etki Eden Parametrelerin İncelenmesi SERT Z., TİMURALP Ç. BİLTEK - Uluslararası Bilim, Teknoloji ve Sosyal Bilimlerde Güncel Gelişmeler Sempozyumu, Ankara, Turkey, 20 - 22 December 2019, vol.1, pp.166-174
The Microstructure and MechanicalProperties of Novel (Co40Cr10Fe30Nb10Ni10)92Al8 Eutectic High Entropy Alloy ÖZCAN A., GAŞAN H., ÇELİK O. N. International Conference on Modern research in Engineering, Technology Science, 29 - 31 March 2019
Bor Nitrür: Üretimi ve Uygulamalardaki Son Gelişmeler AY N., AY G. M., GÖNCÜ Y. International Shymposium on Boron, Turkey, 17 - 19 April 2019
Tek Kolonlu AS/RS Sistemlerinde Titreşimin Bastırılması Özenbaş Yılmaz Ö., ZAFER N. The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, Nevşehir, Turkey, 21 - 23 June 2019, pp.919-923
A Low Cost Six Degree of Freedom Haptic Device YILMAZ S. 6th International Symposium on Academic Studies in Science, Engineering and Architecture Sciences, Ankara, Turkey, 13 - 15 June 2019, pp.86
Güneş Kolektörlerinde Farklı Örtü Malzemelerin Kullanımı TİMURALP Ç., SERT Z. UBAK - 1. Uluslararası Uygulamalı Bilimler Kongresi, Konya, Turkey, 7 - 08 December 2019, vol.1, pp.83-92
Path Planning Methods in Unmanned Aerial Vehicles TÜZÜN S., YILMAZ S. 6th International Symposium on Academic Studies in Science, Engineering and Architecture Sciences, Ankara, Turkey, 13 - 15 June 2019, pp.705-713
Numerical Investigation of Heat Transfer and Pressure Drop Characteristics in an Offset Strip Fin Heat Exchanger DOĞAN B., ÖZTÜRK M. M., ERBAY L. B. 22th Congress of Thermal Sciences and Technology, 11 - 14 September 2019, pp.1197-1205
INVESTIGATION OF HEAT TRANSFER FROM TRAPEZOIDAL FINS BY CONVECTION AND RADIATION SERTEL H., ALTAÇ Z. 22. ISI BİLİMİ VE TEKNİĞİ KONGRESİ, Kocaeli, Turkey, 11 - 14 September 2019, vol.2, pp.1207-1214
Flow and Heat Transfer From Two Tandem Square Cylinders In A Uniform Flow Field YETİK Ö., MAHİR N. ISMS 2019, 13 - 15 June 2019
The Numerical and Experimental Analysis of Thermal Modeling Of Li-Ion Batteries Used In Hybrid Aircraft YETİK Ö., TARHAN B., KARAKOÇ T. H. ISSA2019, 26 - 29 May 2019
Üçgen Rijit Zımba ile Yüklenen Yanal Derecelendirilmiş Katmanların Kayma Temas Problemlerinde Gerilme Şiddeti Faktörü Hesaplamaları ARSLAN O. Uluslararası Bilim, Teknoloji ve Sosyal Bilimlerde Güncel Gelişmeler Sempozyumu, 21 - 22 December 2019
Numerical investigation of low-frequency vibration assisted turning of Al-2024 alloy SOFUOĞLU M. A. ICES 2019, 19 September 2019
A numerical study of Ti6Al4V machining using different non-traditional turning operations SOFUOĞLU M. A., ORAK S., KUŞHAN M. C. ICES 2019, 19 September 2019
MICROSTRUCTURAL INVESTIGATES OF Ni-BASED COMPOSITENi-ESASLI KOMPOZITIN MIKROYAPISAL INCELENMESI BUYTOZ S., ULUTAN M., Nevruz A. The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in Cappadocia/TURKEY (IMSMATEC’19), 21 - 23 May 2019
RESEARCH ON APPLICATIONS OF MINI-TURBOJET AND TURBOJET ENGINED MILITARY UAVS Türkay M., GÜRGEN S., keskin g., DURMUŞ S., KUŞHAN M. C. International Conference of Scientific Paper AFASES 2019, 31 May - 02 June 2019
Katmanlı İmalat Teknolojilerinin Truva Atı YASA E. Kaynak Teknolojisi XI. Ulusal Kongre ve Sergisi, Ankara, Turkey, 15 - 16 November 2019
Characterization and Compression Testing of Double Gyroid Lattice Structures produced by Direct Metal Laser Sintering Kavas B., YASA E., SÖNMEZ M. Ş. AMCTURKEY Additive Manufacturing Conference, İstanbul, Turkey, 17 - 18 October 2019
Finite element modeling of the hot ultrasonic assisted turning of titanium alloy in terms of different vibrational parameters KUŞHAN M. C., ORAK S., SOFUOĞLU M. A. ICSTEM 2019, 15 - 16 September 2019
Selective Laser Melting Process Development for enhanced productivity with Ph 17-4 stainless steel YASA E., Atik İ., Bayraktar İ. AMCTURKEY Additive Manufacturing Conference, İstanbul, Turkey, 17 - 18 October 2019
Eskişehir İlinde R744 Soğutucu Akışkanlı İki Buharlaştırıcılı Bir Soğuk Hava Deposu Tasarımı ALTUN Ö., ASLANTAŞ K., SÖKMEN E. 14. Ulusal Tesisat Mühendisliği Kongresi, İzmir, Turkey, 17 - 20 April 2019
Haptik Cihazların Kinematik Yapılarına Göre Değerlendirilmesi YILMAZ S., ZAFER N. The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC 2019), Kapadokya, Nevşehir, Turkey, 21 - 23 June 2019, pp.930-935
Determination of Orientation Data in Positioning Mobile Robots YILMAZ S. The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC 2019), Kapadokya, Nevşehir, Turkey, 21 - 23 June 2019, pp.1289
A DAMAGE DETECTION OF A STEEL PLATE USING EMI METHOD SOFUOĞLU M. A., ORAK S., KUŞHAN M. C. INTERNATIONAL ANKARA CONFERENCE OF SCIENTIFIC RESEARCH, 4 - 06 October 2019
Fracture Parameters in the Sliding Frictional Contact Problem of Laterally Graded Materials ARSLAN O. 5th International Conference on Advances in Mechanical Engineering, 17 - 19 December 2019
GLIDER FLIGHT TRAINING APPLICATION IN TURKISH AIR FORCE keskin g., KAFALI H., DURMUŞ S., GÜRGEN S., KUŞHAN M. C. International Conference of Scientific Paper AFASES 2019, 31 May - 02 June 2019
Doğal Soğutucu Olarak KarbondioksitT Kullanılan Soğutma Sistemlerinde Bakım Uygulamalarının Değerlendirilmesi ALTUN Ö., ASLANTAŞ K. IXth International Maintenance Technologies Congress and Exhibition, Denizli, Turkey, 26 - 28 September 2019, pp.177-184
Seviye Uçuşu Yapan Bir Uçağın Seri Hibrit Motor Konfigürasyonundaki Yakıt Tüketimi ve Takat İncelemesi GÖKSU ANIL K., ALTUN Ö. X. Ulusal Uçak, Havacılık ve Uzay Mühendisliği Kurultayı, Eskişehir, Turkey, 11 - 12 October 2019, pp.163-166
Bir Kanat Profilinde Aerodinamik Performansın Sayısal Analizi Timuralp Ç. 5. Uluslararası Mühendislik Mimarlık ve Tasarım Kongresi, İstanbul, Turkey, 21 - 22 December 2019, pp.62-67
Low-frequency vibration assisted turning of Inconel-100 material: A simulation study YILDIZ T., KAYA Y., SOFUOĞLU M. A., KUŞHAN M. C. ICAME 2019, 17 - 19 December 2019
Compressive Strength Testing and Characterization of Double Gyroid Lattice Structure Produced by Direct Metal Laser Melting KAVAS B., YASA E., SÖNMEZ M. Ş. 4th WORKSHOP ON METAL ADDITIVE MANUFACTURING, 27 - 28 May 2019
Microstructure and Mechanical Properties(Co40Cr10Fe5Mo5Ni40)82,2Al17,8 Eutectic HighEntropy Alloy GAŞAN H., ÖZCAN A., ÇELİK O. N. 3rd INTERNATIONAL CONFERENCE ONADVANCES INNATURAL APPLIED SCIENCEICANAS 2018, 9 - 12 May 2018
Merkezinde İnce Plaka Bulunan Kapalı Kutuda Isı ve Akış Analizi TİMURALP Ç., SERT Z. 5. Uluslararası Mühendislik Mimarlık ve Tasarım Kongresi, İstanbul, Turkey, 21 - 22 December 2019, pp.53-61
Conjugate Heat Transfer by Natural Convection and Surface Radiation in a Rectangular Enclosure with Discrete Heaters SERT Z., TİMURALP Ç., KARADUGAN S. 4th International Conference on Viable Energy Trends, İstanbul, Turkey, 26 - 28 April 2019
The application of Full Consistency Method (FUCOM) for different non-traditional machining selection problems SOFUOĞLU M. A. ICAME 2019, 17 - 19 December 2019
Structural health monitoring and its applications in manufacturing environment SOFUOĞLU M. A., ORAK S., KUŞHAN M. C. ICAME 2019, 17 - 19 December 2019
DESIGN FOR ADDITIVE MANUFACTURING WITH CASE STUDIES ON AIRCRAFTS AND PROPULSION SYSTEMS Poyraz Ö., Kuşhan M. C. International Conference of Scientific Paper AFASES 2019, Brasov, Romania, 31 May - 02 June 2019, vol.21, pp.166-175
Study on The Electrical Energy of Cylinderical Battery Cells For Hibrit Aircraft TARHAN B., APAYDIN K. K., YETİK Ö., KARAKOÇ T. H. ISSA2019, 26 - 29 May 2019
Damage detection of a steel plate using EMI method SOFUOĞLU M. A., ORAK S., KUŞHAN M. C. 1. Uluslararası Bilimsel Araştırma Konferansı, 4 - 06 October 2019
The Phase Stability and Mechanical Properties of (Co40Cr10Fe5Mo5Ni40)82,20Al17,80Eutectic High Entropy Alloy GAŞAN H., ÖZCAN A., ÇELİK O. N. International Conference On Modern research in Engineering, Technology and Science, 29 - 31 March 2019
Enhancement of Heat Exchangers with Metal Foams ÖZTÜRK M. M., DOĞAN B. 7th Global Congress on Renewable Energy and Environment, Turkey, 18 - 20 October 2019, vol.9, pp.15-28
Examination of Lithium Ion and Lithium Iron Phosphate Thermal Management TARHAN B., YETİK Ö., KARAKOÇ T. H. WESCE 2019, 26 - 28 August 2019
Bakım Uygulamalarında Robotların Yardımcı Ekipman Olarak Kullanılması YILMAZ S. IX. Uluslararası Bakım Teknolojileri Kongresi ve Sergisi, Denizli, Turkey, 26 - 28 September 2019, pp.93-99
Dalmış Cisimler Etrafında Akış ve Isı Transferinin İncelenmesi SERT Z., TİMURALP Ç. UBAK - 1. Uluslararası Uygulamalı Bilimler Kogresi, Konya, Turkey, 7 - 08 December 2019, vol.1, pp.73-82
On the effect of unfixed process variables on mechanica properties in Selective Laser Melting YASA E., Ersoy K., KOÇ B. AMCTURKEY Additive Manufacturing Conference, İstanbul, Turkey, 17 - 18 October 2019
Title: BİR HAVA ARACI MOTOR PARÇASININ ONTOLOJİ TABANLI MODELLENMESİ İÇİN BİR ALT MODEL YAĞCI D., TAT M. E. 1. INTERNATIONAL SYMPOSIUM ON IMPLEMENTATIONS OF DIGITAL INDUSTRY AND MANAGEMENT OF DIGITAL TRANSFORMATION 2019, Konya, Turkey, 25 - 26 June 2019, vol.0
A New Method for Detecting Finger Joint Gestures Using Raw Data Obtained from The Leap Motion Sensor YILMAZ S. The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC 2019), Kapadokya, Nevşehir, Turkey, 21 - 23 June 2019, pp.1288
Trapezoid Kesitli Kapalı Geometrilerde Doğal Taşınım İle Isı Geçişinin Analizi TİMURALP Ç., SERT Z. BİLTEK - Uluslararası Bilim, Teknoloji ve Sosyal Bilimlerde Güncel Gelişimler Sempozyumu, Ankara, Turkey, 20 - 22 December 2019, vol.1, pp.156-165
LOW-FREQUENCY VIBRATION ASSISTED TURNING OF INCONEL-100 MATERIAL: A SIMULATION STUDY, , ISTANBUL 2019 yıldız t., Kaya Y., SOFUOĞLU M. A., KUŞHAN M. C. 5TH INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING, 17 - 19 December 2019
A novel criteria weighting approach for decision-making SOFUOĞLU M. A. 1. Uluslararası Bilimsel Araştırma Konferansı, 4 - 06 October 2019
Bir Ağır Hizmet Dizel Motorunun Enerji ve Ekserji Analizleriyle Performans Değerlendirmesi HOŞGÖR O., TAT M. E. 4th International Symposium on Railway Engineering, Karabük, Turkey, 10 - 12 October 2018, pp.290-297
A review of modulation assisted machining operations in manufacturing SOFUOĞLU M. A. ICAME 2018, 19 - 21 December 2018
Investigation of Support Structures for Direct MetalLaser Sintering (DMLS) of IN625 Parts, Poyraz Ö., YASA E., Akbulut G., Orhangül A., Pilatin S. Proc. of Solid Freeform Fabrication (SFF) Symposium, Austin, United States Of America, 10 - 12 August 2015
Tribological and Finite Element Study on the Elastic Behaviour of a Steel Sphere against a Deformable Flat Material GÜRGEN S., SERT A. 2nd International Conference on Tribology, İstanbul, Turkey, 18 - 20 April 2018, vol.1, pp.237-240
Composite Structures of C919 GÜRGEN S., ÇAKIR F. H., SOFUOĞLU M. A., KUŞHAN M. C. Conferencefora 8th International Conference, Singapore, Singapore, 26 - 27 August 2018, vol.1, pp.1-4
Ağır Hizmet Dizel Motorlara Ait Bir Kaymalı Yatağın Çalışma Analizi SAYAR M., TAT M. E. 4th International Symposium on Railway Systems Engineering, Karabük, Turkey, 10 - 12 October 2018, pp.433-441
Rene 65 Süper Alaşımının Delik Delme Işleminde FarklıParametrelerin Taguchi Yöntemiyle Analizi BİLGİÇ F., ER Ü., ULUTAN M. 18. Uluslararası Makina Tasarım ve İmalat Kongresi, 3 - 06 June 2018, pp.973-988
An experimental investigation of the ultrasonic-assisted machining of Ti-6Al-4V ÇAKIR F. H., GÜRGEN S., ORAK S., KUŞHAN M. C., SOFUOĞLU M. A. UMTIK 2018, 3 - 06 July 2018
Ultrasonic assisted machining methods: A review from 1984-2017 SOFUOĞLU M. A., ORAK S., KUŞHAN M. C., AY G. M. TURKEYTRIB 2018, 18 - 20 April 2018
Elektrikli raylı ulaşım araçları pantograf-katener sistemlerinde karbon şerit / bakır temas telinin sürtünme ve aşınma davranışlarının incelenmesi ER Ü. 4th International Symposium on Railway System Engineering, Karabük, Turkey, 10 - 12 October 2018, pp.274-281
Combined Heat Transfer in an Enclosure with Different Side Wall Geometry SERT Z., TİMURALP Ç., TEKKALMAZ M. ICENS-4th International Conference on Engineering and Natural Sciences, Kiev, Ukraine, 2 - 06 May 2018, pp.786-794
A Technological And Business Perspective Of Additive Manufacturing For Defense Industry Ersoy K., KOÇ B., YASA E. 18th INTERNATIONAL CONFERENCE ON MACHINE DESIGN ANDPRODUCTION, 3 - 06 July 2018
Precise Measurement of Wear Rate Method for ASTM G-99 Wear Test KAYA E., KILIÇAY K., BAYAR İ., ULUTAN M. 1st International Symposium On Innovative Approches In Scientific Studies, Antalya, Turkey, Antalya, Turkey, 11 - 13 April 2018
Investigation on Tribological Behavior of Laser Surface Treated Ti6Al4V Alloy ÇAVUŞOĞLU N., GÜRGEN S., ÇAKIR F. H., SERT A. 2nd International Conference on Tribology (TURKEYTRIB’18), İstanbul, Turkey, 18 - 20 April 2018, pp.233-236
Hybridizing Best-Worst method with different MCDM methods to solve non-conventional machining problems SOFUOĞLU M. A. 1st International Conference on Advances in Mechanical and Mechatronics Engineering, 8 - 09 November 2018
Effect of Different Heat Inputs on Microstructure and Hardness in PTA Layers KILIÇAY K., BAYAR İ., KAYA E., ULUTAN M. The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, İzmir, Turkey, İzmir, Turkey, 10 - 12 April 2018
A Review on the Additive Manufacturing of Fiber Reinforced Polymer Matrix Composites YASA E., Ersoy K. 29th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, 13 - 15 August 2018
A Study on a Numerical Modelling of Discharge Line Flow Analysis of a Household Type Refrigerator Compressor YEŞİLAYDIN İ., ERBAY L. B. 24th International Compressor Engineering Conference at Purdue, 9 - 12 July 2018, pp.1-8
Understanding Adopting Selective Laser Melting of Metallic Materials YASA E. 29th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, 13 - 15 August 2018
Raylı Sistemlerde Kullanılan Ağır Hizmet Dizel Motorlarının Kestirimci Bakım ve Motor Yağkirleticileri ile Değerlendirilmesi İPEK Y., TAT M. E. 4th International Symposium on Railway System Engineering, Karabük, Turkey, 10 - 12 October 2018, pp.400-407
Investigation the Effects of Ultrasonic Assisted Turning on Surface Properties of Ti6Al4V Alloy Sofuoğlu M. A., Kuşhan M. C., Orak S., Ay G. M. TURKEYTRIB'18 - 2nd INTERNATIONAL CONFERENCE ON TRIBOLOGY , İstanbul, Turkey, 18 - 20 April 2018, pp.208
İçeriden Isıtılan Yatay Duvarları Soğuk Kapalı Kutularda Birleşik Isı Transferi TEKKALMAZ M., SERT Z., TİMURALP Ç. 4. Uluslararası Katılımlı Anadolu Enerji Sempozyumu, Edirne, Turkey, 18 - 20 April 2018, vol.1, pp.157-163
Recent advances in hot vibration assisted machining SOFUOĞLU M. A., ORAK S. ICAME 2018, 19 - 21 December 2018
Raylı Sistemlerde Kullanılan Bir Ağır Hizmet Dizel Motoru Silindir Gömleği Üzerine Uygulanan Farklı Kaplama Malzemelerinin Aşınma Davranışlarının İncelenmesi BIYIKLIOĞLU O., TAT M. E. 4th International Symposium on Railway Systems Engineering, Karabük, Turkey, 10 - 12 October 2018, pp.298-304
A TREATISE ON USING HEXAGONAL BORONNITRIDE FOR SPACE LUBRICATIONAPPLICATIONS AY G. M. TurkeyTrib18 International Conference on Tribology, 18 - 20 April 2018
Sertleştirilmiş AISI 51B60H Borlu Çeliğinin Abrazif Aşınma Davranışı ER Ü. Ist International Symposium on Innovative Approaches in Scientific Studies, 11 - 13 April 2018, pp.297-301
Numerical and Analytical Analysis of Hertz Contact Pressure in ASTM G99 Wear Test KAYA E., KILIÇAY K., ULUTAN M. 1st International Symposium On Innovative Approches In Scientific Studies, Antalya, Turkey, Antalya, Turkey, 11 - 13 April 2018
A Comparative Study of Quantitative Image Analyze and X-Ray Diﬀraction Methods for Carbide Amount in composite coatings on steel KILIÇAY K., KAYA E., BAYAR İ., ULUTAN M. 1st International Symposium On Innovative Approches In Scientific Studies, Antalya, Turkey, Antalya, Turkey, 11 - 13 April 2018
A review of hot machining operations in manufacturing environment SOFUOĞLU M. A., ORAK S. ICAME 2018, 19 - 21 December 2018
Experimental Investigation of Different Hard Carbide Layers Coated by Flame Spray Technic on 90MnCrV8 KILIÇAY K., BAYAR İ., KAYA E., ULUTAN M. The International Conference on Materials Science, Mechanical and Automotive Engineerings and Technology, İzmir, Turkey, İzmir, Turkey, 10 - 12 April 2018
Effect of Hertzian Contact Pressure on Tribological Behaviour of Mild Carbon Steel GÜLEŞEN M., KILIÇAY K., KAYA E. Proceedings of XII International scientific conference“Tribology for Mechanical Engineering” TRİBOMASH 2018, Moscow, Russia, Russia, 19 - 21 October 2018
Recent new applications of hBN AY N., GÖNCÜ Y., AY G. M. SERES’18, III. International Ceramic Glass Porcelain Enamels Glaze and Pigment Congress, Turkey, 10 - 12 October 2018
Composite Structures of SSJ100 KUŞHAN M. C., keskin g. International Symposium on Aircraft Technology, MRO Operations 2018, İstanbul, Turkey, 25 - 28 November 2018, vol.1, pp.50-54
Thermal analysis of batteries used in electrically powered buses SANCAR Y., KILIÇ A. E., PEDİZ R., ORHAN S., SERTEL H. II. INTERNATIONALSCIENTIFIC AND VOCATIONALSTUDIES CONGRESS (BILMES 2018), 5 - 08 August 2018
Low-frequency vibration assisted machining methods: A case study of a titanium alloy SOFUOĞLU M. A. 1st International Conference on Advances in Mechanical and Mechatronics Engineering, 8 - 09 November 2018
Thermal Radiation and Turbulent Natural Convection Heat Transfer in Square Enclosure with a Vertically Hot Plate Inside SERT Z., TEKKALMAZ M., TİMURALP Ç. 4. Uluslararası Katılımlı Anadolu Enerji Sempozyumu, Edirne, Turkey, 18 - 20 April 2018, vol.1, pp.688-697
Seramik Tozu İçeren Nano Süspansiyonların Kumaş Yüksek Hızlı Çarpma Direncine Etkileri GÜRGEN S., KUŞHAN M. C. 3. Uluslararası Lif ve Polimer Araştırmaları Sempozyumu, Bursa, Turkey, 8 - 09 March 2018, vol.1, pp.1-6
TÜRKİYE ELEKTRİK KURULU GÜCÜNÜN VE TÜKETİMİNİN BÖLGELERE GÖRE ANALİZİ Şişman N., ARAS N., ARAS H. 4. Uluslararası Katılımlı Anadolu Enerji Sempozyumu, Edirne, Turkey, 18 - 20 April 2018, vol.2, pp.1151-1159
TURNING OPERATION OF NICKEL BASED SUPERALLOY RENE 41 tali d., GAŞAN H., GÜLEŞEN M., GÜRGEN S., KUŞHAN M. C. The IIER International Conference, Prag, Czech Republic, 21 - 22 March 2017, vol.1, pp.1-3
Investigation of Microstructure and Tribological Properties of Molybdenum Coatings BAYAR İ., ULUTAN M., KILIÇAY K., KAYA E. International Congress On Applied Science And technology, Astech’2017, Malaga, Spain, Malaga, Spain, 17 - 20 April 2017
Assessment of natural radioactivity in lignite mining Ankara H., Yerel Kandemir S., Aras H. 7th BALKANMINE CONGRESS, Prijedor, Bosnia And Herzegovina, 11 - 13 October 2017, vol.2, pp.223-225
Kent İçi Hafif Raylı Ulaşım Sistemleri Katener Hatlarında Buzlanma Problemi ve Bakım Yöntemlerinin İncelenmesi ER Ü., ÇAKIR F. H. 8. Bakım Teknolojileri Kongresi ve Sergisi, Denizli, Turkey, 28 - 30 September 2017, pp.195-200
A CASE STUDY IN ADDITIVE MANUFACTURING OF LARGE METALLIC PARTS YASA E., KOÇ B., ERSOY K. Research and Development in Business and Education,in Prague November 14-16, 2017, Prague, Czech Republic, 14 - 16 November 2017
Experimentation of structural health monitoring using Statistically Quantified Electromechanical Impedance SOFUOĞLU M. A., ORAK S. Mediterranean Natural Sciences and Engineering Congress, 19 - 22 October 2017
Food Miles and Applications Uğurluoğlu E., ARAS H., ARAS N. International Conference On Innovations In Engineering And Technology (ICIET-17) March 22-23, 2017 London (UK), Londrina, Brazil, 22 - 23 March 2017, pp.224-231
A novel fuzzy MCDM model: Fuzzy Best-Worst method SOFUOĞLU M. A., ORAK S. International Congress on Applied Science and Technology (ASTECH’xx2017), 17 - 20 April 2017
Investigation of the Mechanism of Cryogenic Treatment on the Microstructural Changes in Tungsten Carbide Tools SERT A., ÇELİK O. N., GAŞAN H. 3th International Conference on Engineering and Natural Science - ICENS2017, Budapest, Hungary, 3 - 07 May 2017, pp.295
Numerical investigation of machining characteristics of Hastelloy-x SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., ORAK S., KUŞHAN M. C. International Science and Technology Conference (ISTEC 2017), 17 - 19 July 2017
Suda dağılmaya karşı duraylılık indeksi (SDI) testi için temsili deney örneklerin hazırlanmasında kullanılan aşındırıcı çanaklar. ANKARA H., AKSOY M., YEREL KANDEMİR S., ARAS H. 6. Uluslararası Maden Makinaları ve Teknolojileri Kongresi, 18 - 21 October 2017, pp.125-129
Shear strength of AA7075 lap joints after various joining methods GÜRGEN S., ÇAKIR F. H., SOFUOĞLU M. A., KUŞHAN M. C. International Advanced Researches Engineering Congress, 16 - 18 November 2017
Cutting Performance of Different Co Content of Tungsten Carbide Cutting Tools for Titanium Alloy Milling SERT A., ÇELİK O. N. 3th International Conference on Engineering and Natural Science - ICENS2017, Budapest, Hungary, 3 - 07 May 2017, pp.124
Numerical investigation of hot ultrasonic assisted turning of titanium alloy ÇAKIR F. H., GÜRGEN S., SOFUOĞLU M. A., KUŞHAN M. C., ORAK S. 3rd International Conference on Engineering and Natural Sciences (ICENS 2017), 3 - 07 May 2017
Optimization of turning operations using multi criteria decision making methods SOFUOĞLU M. A., ARAPOĞLU R. A., ORAK S. 2017 International Conference on Industrial Engineering and Industrial Management(CIEIM 2017), 3 - 05 January 2017
An overview of equipment used for vacuum AY G. M., SOFUOĞLU M. A. International Congress on Applied Science and Technology (ASTECH’xx2017), 17 - 20 April 2017
Failure of Sandwich Structures in Aviation GÜRGEN S., GÖDE E., KUŞHAN M. C. International Advanced Researches Engineering Congress, Osmaniye, Turkey, 16 - 18 November 2017, vol.1, pp.695-697
Springback Behavior of AA6082T6 Tubes in Three-point Bending Operation SOFUOĞLU M. A., GÜRGEN S., ÇAKIR F. H., ORAK S. 7th International Conference on Engineering, Project, and Production Management (EPPM), Bialystok, Poland, 21 - 23 September 2016, vol.182, pp.658-664
Impact of Industry 4.0 to Aircraft Maintenance, Repair and OverHaul TAT M. E., KUŞHAN M. C. VII International Symposium Engineering Management and Competitiveness 2017 (EMC 2017), Zrenjanin, Serbia, 16 - 17 June 2017, pp.101-105
A new hybrid decision making model to optimize machining operations SOFUOĞLU M. A. International Science and Technology Conference (ISTEC 2017), 17 - 19 July 2017
Helisel türbülatörlü borudaki akış için sayısal performans değerlendirmesi UĞURLUBİLEK N., Uralcan İ. Y. 21. Ulusal Isı Bilimi ve Tekniği Kongresi, Çorum, Turkey, 13 - 16 September 2017, pp.75
Effect of Mo Addition on the Microstructure and Mechanical Properties of AlCoCrFeNi Eutectic High Entropy Alloys ÖZCAN A., GAŞAN H., ÇELİK O. N. 26TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS - METAL 2017, 24 - 26 May 2017
Natural Convection Heat Transfer of a Nanofluid in 2D Enclosure: A Review SERT Z., TİMURALP Ç., YILDIZAY H. D. International Congress on Applied Science and Technology (ASTECH’xx2017), Malaga, Spain, 17 - 20 April 2017, pp.45
A NEW SUPERALLOY: ALLVAC 718 Plus SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., KUŞHAN M. C. I S E RINTERNATIONAL CONFERENCE, Jakarta, Indonesia, 12 - 13 January 2017, vol.1, pp.1-4
Investigation of Process Parameters of AISI 304 Fiber Cut with Fiber Laser BAYAR İ., KILIÇAY K., KAYA E., ULUTAN M., AKMAN D. International Congress On Applied Science And technology, Astech’2017, Malaga, Spain, Malaga, Spain, 17 - 20 April 2017
Examination of Polished Marble Surface by Using the Atomic Force Microscopy ANKARA H., YEREL KANDEMİR S., ARAS H., PAT S. 25th International Mining Congress and Exhibition of Turkey New Trends in Mining, 11 - 14 April 2017
Havacılık Komponentlerinin Bakım Uygulamalarında Katmanlı İmalat Teknolojilerinin Kullanımı Poyraz Ö., KUŞHAN M. C. VIII: Bakın Teknolojileri Kongre ve Sergisi, Denizli, Turkey, 28 - 30 September 2017
BİR AĞIR DİZEL MOTORUN HİDRODİNAMİK KAYMALI YATAĞINDA OLUŞAN YAĞ FİLMİ VE DEFORMASYON ETKİSİNİN ARAŞTIRILMASI Sayar M., Tat M. E. VIII. Bakım Teknolojileri Kongresi ve Sergisi, Denizli, Turkey, 28 - 30 September 2017, pp.55-62
Experimental Study on Tribological Performance of SiC Composite Coating Layers KILIÇAY K., ULUTAN M., KAYA E., BAYAR İ. 3rd International Iron Steel Symposium (UDCS’17), Karabük, Turkey, Karabük, Turkey, 3 - 05 April 2017
Effect of Ti addition on microstructure and Hardness of Al1.5CoCr FeMoNi high entropy alloys GAŞAN H., LÖKÇÜ E., ÇELİK O. N., Özcan A., ÇELİKYÜREK İ., ULUTAN M. METAL 2017 26. International conference on Metallurgy and Materials, Brno, Czech Republic, 24 - 26 May 2017, pp.79
Unmanned Systems For Navies ÇAMURDAN B., vural h., GÜRGEN S., KUŞHAN M. C. Euroasian Multidisciplinary Forum, Tbilisi, Georgia, 6 - 07 October 2017, vol.1, pp.15
Thermo-hydraulic Performance Assessment of a Compact Heat Exchanger by Varying Plate Fins Ozturk M. M., DOĞAN B., Erbay L. B. 6th IEEE INTERNATIONAL CONFERENCE on RENEWABLE ENERGY RESEARCH and APPLICATIONS (ICRERA 2017), California, United States Of America, 5 - 08 November 2017, pp.70-75
Study of Carbide Evolution During Heat Treatment of AISI D2 Tool Steel ÇAVUŞOĞLU N., SERT A., ÇELİK O. N., CEYHUN V. International Conference on Engineering Technologies (ICENTE’17), Konya, Turkey, 7 - 09 December 2017, pp.129
UNSTEADY MIXED CONVECTION HEAT TRANSFER and FLUID FLOW FROM ISOTHERMAL HORIZONTAL TRIANGULAR CYLINDERS SUBJECTED TO UPWARD CROSS FLOW ALTAÇ Z., SERT Z., MAHİR N., TİMURALP Ç. 8th. International Advanced Technologies Symposium, Elazığ, Turkey, 19 - 22 October 2017, pp.2776-2783
Three Dimensional Numerical Investigation of Heat Transfer and Fluid Flow in Circular Duct with Bends SERT Z., TİMURALP Ç., YILDIZAY H. D. International Congress on Applied Science and Technology (ASTECH’xx2017), Malaga, Spain, 17 - 20 April 2017
Investigation of Tribological and Mechanical Performance of Cryogenic Treated Medium Carbon Steel, 38MnVS6 KAYA E., ULUTAN M., KILIÇAY K., BAYAR İ. 3rd International Iron and Steel Symposium (UDCS’17), Karabük, Turkey, Karabük, Turkey, 3 - 05 April 2017, pp.460-464
An overview of parameters affecting ball-on-disk test AY G. M., SOFUOĞLU M. A., ÇELİK O. N. International Congress on Applied Science and Technology (ASTECH’xx2017), 17 - 20 April 2017
ALLVAC 718 PLUSTM SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., KUŞHAN M. C. ISER International Conference, 12th -13th January 2017, Jakarta, Indonesia, Jakarta, Indonesia, 12 - 13 January 2017, vol.1, pp.1-4
Transient Exergy Analysis Of The Condenser And Evaporator Of An Air Source Heat Pump Water Heater ÖZTÜRK M. M., ERBAY L. B. 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, Malaga, Spain, 11 - 13 July 2016
Yenilikçi Bir İmalat Yöntemi Ultrasonik Yardımlı Sıcak Tornalama GÜRGEN S., SOFUOĞLU M. A., ÇAKIR F. H., KUŞHAN M. C., ORAK S. 1st International Conference on Engineering Technology and Applied Sciences, Afyon, Turkey, 21 - 22 April 2016
An Overview of Plasma Transferred Arc Coating on Metals AY G. M., ÇELİK O. N. 2nd International Congress on The World of Technology and Advanced Materials, Kırşehir, Turkey, 28 September - 02 October 2016
The Effect of Characteristics in Pneumatic Conveying Systems ERGÜR H. S. 8th International Ege Energy Symposium, Afyon, Turkey, 11 - 13 May 2016, pp.920-927
The Relationship Between The European States Air Force and Their Geopolitical Positions KUŞHAN M. C. 15th International Conference of Scientific Papers “Scientific Search and Education Air Force AFASES 2013, Brasov, Romania, 24 - 26 May 2012, vol.2013, pp.647-650
A400M gövdesinde kompozit malzeme uygulamaları KUŞHAN M. C., ÇAKIR F. H., GÜRGEN S., SOFUOĞLU M. A. International Conference on Natural Science and Engineering, 19 - 20 March 2016
The Position of Turkısh Aır Transportatıon in Europe Çamurdan B., Çetin S., Gürgen S., Kuşhan M. C. 3rd International Multidisciplinary Scientific Conferences on Social Sciences and Arts, Varna, Bulgaria, 22 - 31 August 2016, vol.5, pp.849-855
Zırhlı Araçların Geleceği ve Bu Araçlardaki Yeni Kompozit Malzemeler Kuşhan M. C. 21. Kara Araçları Teknoloji Paneli, Ankara, Turkey, 31 May 2016, pp.1-2
EXPERIMENTAL INVESTIGATION OF CHATTER VIBRATION PREVENTION METHODS IN TURNING OPERATIONS Sofuoğlu M. A., Orak S., Arapoğlu R. A. CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING ISTANBUL, İstanbul, Turkey, 10 - 13 May 2016
Two and three dimensional transient analysis of flow and heat transfer in structures with domical and curved roofs ALTAÇ Z., UĞURLUBİLEK N. 2nd International Conference on Advances in Mechanical Engineering İstanbul 2016, İstanbul, Turkey, 10 - 13 May 2016
Examınatıon Of The European Countrıes Uav Fleets Kuşhan M. C. 3rd International Multidisciplinary Scientific Conferences on Social Sciences and Arts, Varna, Bulgaria, 22 - 31 August 2016, vol.2, pp.143-150
Comparison of 2D 3D Numerical Analysis of the Air Side Heat Transfer and Laminar Flow in Multilouvered Fin and Flat Tube Heat Exchanger UĞURLUBİLEK N., ERBAY L. B. XII.International HVAC+R & Sanitary Technology Symposium, İstanbul, Turkey, 31 March - 02 April 2016, pp.19-26
Characterization of Tribological Properties of Lubricating Oil With Silicon Nitride Nanoparticle Additives SERT A., SAVACI U., ÇELİK O. N., TURAN S. IMMC 2016 18th International Metallurgy & Materials Congress, İstanbul, Turkey, 29 October - 01 November 2016, pp.455-458
Applications of Composite Materials in A400M Fuselage KUŞHAN M. C., ÇAKIR F. H., GÜRGEN S., SOFUOĞLU M. A. International Conference on Natural Science and Engineering (ICNASE’16), Kilis, Turkey, 19 - 20 March 2016
Characterisation of Tribological Properties of Lubricating Oil with Silicon Nitride Nanoparticle Additives SERT A., SAVACI U., ÇELİK O. N., TURAN S. The 18th International Metallurgy Materials Congress, İstanbul, Turkey, 29 September - 01 October 2016, pp.455-458
Abrasıve Propertıes Of Sılıcon Carbıde Partıcles In Shear Thıckenıng Fluıd GÜRGEN S., KUŞHAN M. C. Conference On Advances In Mechanıcal Engıneerıng, İstanbul, Turkey, 13 - 16 May 2016
Friction and Wear Behavior of Plasma Transferred Arc Coating on AISI 4140 Steel of Boron Carbide and Nickel Powder Mixture AY G. M., ÇELİK O. N. ISTEC 2016 International Science and Technology Conference, Viyana, Austria, 13 - 15 July 2016, pp.416-425
Investigation of morphology of polished marble surfaceby Atomic Force Microscopy AFM ANKARA H., ARAS H., ÇELİKYÜREK İ., YEREL KANDEMİR S. WMESS 2016, Prague, Czech Republic, 5 - 09 September 2016
Description of Modification of Armor Protection for Helicopters GÜRGEN S., KUŞHAN AKIN S. R., KUŞHAN M. C. 28th IAARHIES International Conferences, Shanghai, China, 18 - 19 September 2016, vol.1, pp.66-69
Descrıptıon Of Modıfıcatıon Wıth New Armor Protectıon Plates For Helicopters GÜRGEN S., şeniz kuşhan a., KUŞHAN M. C. IAARHIES 28th International Conference on Engineering & Technology ICET – 2016, Shanghai, China, 18 - 19 September 2016
Meta analysis of factors affecting surface roughness in milling AY G. M., SOFUOĞLU M. A. 2nd International conference on advances in mechanical engineering, 10 - 13 May 2016
A Review of Minimum Quantity Lubrication for Machining Process AY G. M., ÇELİK O. N. WITAM-2016 2ND INTERNATIONAL CONGRESS ON THE WORLD OF TECHNOLOGY AND ADVANCED MATERIALS, Kırşehir, Turkey, 28 September - 02 October 2016
Yenilikçi bir imalat yöntemi: Ultrasonik yardımlı sıcak tornalama GÜRGEN S., SOFUOĞLU M. A., ÇAKIR F. H., KUŞHAN M. C., ORAK S. 1. Uluslararası Mühendislik Teknolojileri ve Uygulamalı Bilimler Konferansı, 21 - 22 April 2016
Abrasive Properties of Silicon Carbide Particles in Shear Thickening Fluid GÜRGEN S., KUŞHAN M. C. The 2nd International Conference on Advances in Mechanical Engineering – ICAME2016, İstanbul, Turkey, 10 - 13 May 2016, vol.1, pp.298-302
Open Source in Tribology Analyzing and Visualizing Tribology Data with R AY G. M., ÇELİK O. N. 1 st International Conference on Engineering Technology and Applied Sciences, Afyon, Turkey, 21 - 22 April 2016
YENİLİKÇİ BİR İMALAT YÖNTEMİ ULTRASONİK YARDIMLI SICAK TORNALAMA GÜRGEN S., SOFUOĞLU M. A., ÇAKIR F. H., ORAK S., KUŞHAN M. C. 1st International Conference on Engeneering Technology and Applied Sciences, 21 - 22 April 2016
A statistical method approach for wind energy potential estimation YILDIZAY H. D., ARAS N., YILMAZ V., ARAS H. WMESS 2016, Prague, Czech Republic, 5 - 09 September 2016
EFFECT OF AUSTENITIZATION TEMPERATURE ON TRIBOLOGICAL BEHAVIOUR OF MICRO ALLOYED STEEL ULUTAN M., KILIÇAY K., KAYA E. International Conference on Material Science and Technology in Cappadocia(IMSTEC 2016), 6 - 08 April 2016
Numerical Characterization of a Jet Impingement Cooling System Kaçar E. N., ERBAY L. B. 12th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, HEFAT2016, Malaga, Spain, 11 - 13 July 2016
Overview of Solid Lubricants in Industrial Applications AY G. M. WITAM-2016 2ND INTERNATIONAL CONGRESS ON THE WORLD OF TECHNOLOGY AND ADVANCED MATERIALS, Kırşehir, Turkey, 28 September - 02 October 2016
Effect of Mo Content on Structure and Wear Behavior of AlCoCrFeMoxNi x 0 5 1 0 High Entropy Alloys GAŞAN H., LÖKÇÜ E., özcan a., ÇELİK O. N., ÇELİKYÜREK İ., ULUTAN M., et al. 25th International Conference on Metallurgy and Materials, Bruno, Czech Republic, 25 - 27 May 2016
Finite Element Modeling of Rail Track Guided Acoustic Waves for Flaw Detection KAMAŞ T., ER Ü. 3rd International Symposium on Railway System Engineering (ISERSE’16), Karabük, Turkey, 13 - 15 October 2016, pp.501-507
The Analysis of Characteristics and Troubleshootings on Pneumatic Conveying Systems ERGÜR H. S. 8th International Ege Energy Symposium, Afyon, Turkey, 11 - 13 May 2016, pp.928-933
High Performance Fabrics in Body Protective Systems Gürgen S., Kuşhan M. C. 4th Asia Conference on Mechanical and Materials Engineering (ACMME 2016), Kuala-Lumpur, Malaysia, 14 - 18 July 2016
A Study of Quantitative Metallography and X Ray Diff raction Methods for Quantifying Carbide Amount in AISI D2 Tool Steel SERT A., GÜRGEN S., ÇELİK O. N. IMMC 2016 18th International Metallurgy & Materials Congress, İstanbul, Turkey, 29 October - 01 November 2016, pp.459-462
Springback behaviour of AA6082T6 tubes in the three point bending operation SOFUOĞLU M. A., GÜRGEN S., ÇAKIR F. H., ORAK S. 7th International Conference on Engineering, Project,and Production Management (EPPM2016), Bialystok, Poland, 21 - 23 September 2016
Th MSR and RELATED STUDIES IN TURKEY ERBAY L. B. Technical Meeting on the Status of Molten Salt Reactor Technology IAEA’s Headquarters, Viyena, Austria, 31 October - 03 November 2016
Yeni Bir Alışılmamış İmalat Yöntemi Sıcak Ultrasonik Yardımlı Tornalama GÜRGEN S., SOFUOĞLU M. A., ÇAKIR F. H., KUŞHAN M. C., ORAK S. 1. Uluslararası Mühendislik Teknolojileri ve Uygulamalı Bilimler Konferansı (ICETAS 2016), afyon, Turkey, 21 - 22 April 2016
AN OPTIMIZATION APPROACH TO PREVENT CHATTER SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., ORAK S., ÇELİK O. N., KUŞHAN M. C. Proceedings of 27th The IIER International Conference, St. Petersburg, Russia, 5 - 07 June 2015
Structural Improvement of Train Rail with Different Heat TreatmentProcess ÇAKIR F. H., ÇELİK O. N. ISTANBUL UNIVERSITYWORLD CONFERENCEON TECHNOLOGY, INNOVATION AND ENTREPRENEURSHIP, İstanbul, Turkey, 28 - 30 May 2015
NUMERICAL CHARACTERIZATION OF A JET IMPINGEMENT COOLING SYSTEM USING COUPLED HEAT TRANSFER ANALYSIS Kacar E. N., ERBAY L. B. ASME Turbo Expo: Turbine Technical Conference and Exposition, Montreal, Canada, 15 - 19 June 2015
An optimization approach to prevent chatter vibrations SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., ORAK S., ÇELİK O. N., KUŞHAN M. C. 27 th TheIIER International Conference, St. Petersburg, Russia, 05 June 2015
Sanal Cisimlerin Sürtünmeli Temas Altında Haptik Deformasyonu ZAFER N., YILMAZ S. Otomatik Kontrol Ulusal Toplantısı, Denizli, Turkey, 10 - 12 September 2015, pp.879-883
Multi Response Optimization of Turning Operation with Self Propelled Rotary Tool SPRT GÜRGEN S., SOFUOĞLU M. A., ÇAKIR F. H., ORAK S., KUŞHAN M. C. WORLD CONFERENCE ON TECHNOLOGY, INNOVATION AND ENTREPRENEURSHIP, İstanbul, Turkey, 28 - 30 May 2015, vol.1, pp.50
Üç boyutlu dikdörtgensel kutularda türbülanslı doğal taşınım ve türbülans modellerinin değerlendirilmesi ALTAÇ Z., UĞURLUBİLEK N. 20. Ulusal Isı Bilimi ve Tekniği Kongresi, Turkey, 2 - 05 September 2015, pp.28-36
Türkiye Türkmenistan Savunma Sanayii ilişkileri Kuşhan M. C. Berkarar Döwletiñ Bagtyýarlyk Döwrüniñ Sagdyn Jemgyýýet Ideýasy, Asgabat, Turkmenistan, 12 February 2015
Parmak Hareketlerini Takip Eden Mekatronik Bir Sistem ZAFER N., YILMAZ S. Otomatik Kontrol Ulusal Toplantısı, Denizli, Turkey, 10 - 12 September 2015, pp.343-347
Finite Element Modeling of Ultrasonic Assisted Turning of Ti6Al4V Alloy ÇAKIR F. H., GÜRGEN S., SOFUOĞLU M. A., ÇELİK O. N., KUŞHAN M. C. World Conference on Technology, Innovation and Entrepreneurship, İstanbul, Turkey, 28 - 30 May 2015, pp.2839-2848
Flexible fixturing system for low production quantities Çakır F. H., Gürgen S., Sofuoğlu M. A., Çelik O. N., Kuşhan M. C., Orak S. Proceeding of 27th The IIER International Conference, Sankt-Peterburg, Russia, 05 June 2015, pp.56-58
Operational Improvements in The Assembly Process of Lead Cable Using New Methods SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., KUŞHAN M. C. World Conference on Technology, Innovation and Entrepreneurship, İstanbul, Turkey, 28 - 30 May 2015, pp.2576-2585
Düz bir plaka yakınındaki kare kesitli silindir etrafında akış MAHİR N., YETİK Ö. ULIBTK'15 20. Ulusal Isı Bilimi ve Tekniği Kongresi, Turkey, 02 September 2015
An optimization approach to prevent chatter vibration Sofuoğlu M. A., Çakır F. H., Gürgen S., Orak S., Çelik O. N., Kuşhan M. C. Proceeding of 27th The IIER International Conference, Sankt-Peterburg, Russia, 05 June 2015, pp.37-39
Numerical Investigation of Heat Transfer of Nanofluid Flow Past Two Cylinder in Tandem Arrangement YETİK Ö. AMRE 2015, 10 - 12 October 2015
Flexible Fixturing Systems for Low Production Quantities SOFUOĞLU M. A., ÇAKIR F. H., GÜRGEN S., ORAK S., ÇELİK O. N., KUŞHAN M. C. 27th The IIER International Conference, St. Petersburg, Russia, 4 December - 05 June 2015
Multi Response Optimization Of Turning Operation With Self-Propelled Rotary Tool Gürgen S., Sofuoğlu M. A., Çakır F. H., Orak S., Kuşhan M. C. World Conference on Technology, Innovation and Entrepreneurship, İstanbul, Turkey, 26 - 28 May 2015
AÇIK OYUK İÇEREN ALT YÜZEYİNDEN ISITILAN YATAY KANALDA ISI GEÇİŞİ ve AKIŞIN ÜÇ BOYUTLU OLARAK İNCELENMESİ TİMURALP Ç., ALTAÇ Z. 3. Anadolu Enerji Sempozyumu, Muğla, Turkey, 1 - 03 October 2015
WEAR BEHAVIOUR OF BORON CARBIDE POWDER REINFORCED COATING ON AISI 4140 PRODUCED BY PLASMA TRANSFERRED ARC AY G. M., ÇELİK O. N. International Science and Technology Conference 2015, St. Petersburg, Russia, 2 - 04 September 2015, pp.965-973
Finite element modelling of ultrasonic assisted turning of Ti6Al4V alloy ÇAKIR F. H., ÇELİK O. N., KUŞHAN M. C., GÜRGEN S., SOFUOĞLU M. A. WORLD CONFERENCE ON TECHNOLOGY, INNOVATION AND ENTREPRENEURSHIP (WCTIE 2015), İstanbul, Turkey, 28 - 30 May 2015
Tribological Behaviors of Yttria Stabilized Zirconia (YSZ) Nanoparticles as Lubricant Additives SERT A., YILMAZ ÇAKTA D. International Nanotechnology Conference, Paris, France, 15 - 17 June 2015, pp.28-30
ADHESIVE WEAR BEHAVIOR OF TIN AND CRNCOATED DIN115CRV3 STEEL TOOLS AT DIFFERENT LOAD CONDITIONS ÖTEYAKA M. Ö., YILDIRIM M. M., ULUTAN M., ÇELİK O. N. Proceedings of 8th ISERD International Conference, İstanbul, Turkey, 9 - 11 August 2015, pp.69-72
Adhesive Wear Behavior of TiN and CrN Coaated DIN 115 CrV 3 Steel Tools at Different Load Conditions ÖTEYAKA M. Ö., YILDIRIM M. M., ULUTAN M., ÇELİK O. N. International Conference on Chemical and Biochemical Engineering, 09 August 2015
Finite Element Modelling of Ultrasonic Assisted Turning of Ti6Al4 Alloy Çakır F. H., Çelik O. N., Kuşhan M. C., Gürgen S., Sofuoğlu M. A. ISTANBUL UNIVERSITY WORLD CONFERENCE ON TECHNOLOGY, INNOVATION AND ENTREPRENEURSHIP “ENTREPRENEURSHIP FOR TECHNOLOGY AND INNOVATION - BASED SUSTAINABLE DEVELOPMENT”, İstanbul, Turkey, 28 - 30 May 2015
Açık Oyuk içeren bir yüzeyinden ısıtılan yatay kanalda ısı geçişi ve akışın incelenmesi TİMURALP Ç., ALTAÇ Z. 3. ANADOLU ENERJİ SEMPOZYUMU, Muğla, Turkey, 1 - 03 October 2014
An Optimization Approach to Prevent Chatter Vibrations Sofuoğlu M. A., Çakır F. H., Gürgen S., Orak S., Çelik O. N., Kuşhan M. C. 27th The IIER International Conference, Samara, Russia, 05 June 2015, pp.37-39
Wear Behavior of Boron Carbide Powder Reinforced Coating on AISI 4140 Produced by Plasma Transferred Arc AY G. M., ÇELİK O. N. International Science and Technology Conference, 2 - 04 September 2015
Structural Improvement of Train Rail with Different Heat Treatment ÇAKIR F. H., ÇELİK O. N. ISTANBUL UNIVERSITY WORLD CONFERENCE ON TECHNOLOGY, INNOVATION AND ENTREPRENEURSHIP “ENTREPRENEURSHIP FOR TECHNOLOGY AND INNOVATION - BASED SUSTAINABLE DEVELOPMENT”, 28 - 30 May 2015
Kompakt Bir Isı Değiştiricide Dış Akış Entropi Üretiminin Sayısal İncelenmesi DOĞAN B., ERBAY L. B. 20. Ulusal Isı Bilimi ve Tekniği Kongresi, Balıkesir, Turkey, 2 - 05 September 2015, vol.1
Multi response optimization of turning operation with self-propelled rotary tool GÜRGEN S., SOFUOĞLU M. A., ÇAKIR F. H., ORAK S., KUŞHAN M. C. World Conference on Technology, Innovation and Entrepreneurship, İstanbul, Turkey, 28 - 30 May 2015, pp.2592-2600
Kompakt Bir Isı Değiştiricide Dış Akış Entropi Üretiminin Taguchi Metodu ile Optimizasyonu DOĞAN B., ERBAY L. B. 20. Ulusal Isı Bilimi ve Tekniği Kongresi, Balıkesir, Turkey, 2 - 05 September 2015, vol.1
Tribological Examination of Hardened Two Types Boron Steel for Railway Applications ÇAKIR F. H., BOZKURT F., ÇELİK O. N., ER Ü. IWCEA 2015, 30 November - 01 December 2015
Flexible fixturing systems for low production quantities ÇAKIR F. H., GÜRGEN S., SOFUOĞLU M. A., ÇELİK O. N., KUŞHAN M. C., ORAK S. 27 th TheIIER International Conference, St. Petersburg, Russia, 05 June 2015
Noise In Hydraulic Systems and Prevention Methods ERGÜR H. S., PANCAR Y. 7th International Ege Energy Symposium and Exhibition-7th IEESE, Uşak, Turkey, 18 - 20 June 2014, pp.917-934
A Novel Approach for Armor Applications of Shear Thickening Fluids in Aviation and Defense Industry ÇAKIR F. H., GÜRGEN S., SOFUOĞLU M. A., ÇELİK O. N., KUŞHAN M. C., ORAK S. AFASES 2014, Brasov, Romania, 22 - 24 May 2014, vol.1, pp.179-187
Bina Cephelerinde Güneş Duvarı Kullanımının Sayısal Analizi SERT Z., TİMURALP Ç. IV. Ulusal Güneş ve Hidrojen Enerjisi Kongresi, Eskişehir, Turkey, 22 - 23 May 2014
Pnömatik Sistemlerde Sağlık ve Güvenlik ERGÜR H. S. Uluslararası Katılımlı VII. Ulusal Hidrolik Pnömatik Kongresi, İstanbul, Turkey, 22 - 25 October 2014
Wireless Eddy Current Probe Prototype and Monitor Design and Aircraft Maintenace Applications Engin G., Kuşhan M. C., Çevik S. Applied Materials and Electronics Engineering, Kowloon, Hong Kong, 26 - 27 April 2014
Numerical Investigation of Thermal and Hydraulic Performance of Louvered Fin Aluminum Heat Exchanger ALTUN Ö., UĞURLUBİLEK N., DOĞAN B., ERBAY L. B. XI. International HVAC R Technology Symposium, İstanbul, Turkey, 8 - 10 May 2014, vol.1, pp.169-176
A Novel Approach for Armor Applications of Shear Thickening Fluids in Aviatıon and Defense Industry KUŞHAN M. C., GÜRGEN S., tolga ü., ÇEVİK S. International Conference of Scientific Paper AFASES, bükreş, Romania, 22 - 24 May 2014
A decision support system for selection of bio materials Sofuoğlu M. A., Orak S. International Conference on Machine Design and Production (UMTIK 2014), İzmir, Turkey, 30 June - 03 July 2014, vol.1, pp.541-553
Numerical Investigation of Thermal and Hydraulic Performance Louvered Fin Aluminum Heat Exchanger ALTUN Ö., UĞURLUBİLEK N., DOĞAN B., L Berrin E. XI. International HVAC+R Technology Symposium, Istanbul, İstanbul, Turkey, 8 - 10 May 2014
Pnömatik Taşımada Sistem Bileşenlerinin Önemi ERGÜR H. S., PANCAR Y. Uluslararası Katılımlı VII. Ulusal Hidrolik Pnömatik Kongresi, İstanbul, Turkey, 22 - 25 October 2014
ANN Based Prediction of Flow and Heat Transfer Between Two Tandem Square Cylinders Near The Wall YETİK Ö., MAHİR N. ISEAIA 2014, 5 - 07 November 2014
Effects of Hexagonal Boron Nitride on Tricalcium Phosphate- Hexagonal Boron Nitride Composite Gecgin M., Onuklu E., Eser A., GÖNCÜ Y., AY G. M. SERES’14, International Ceramic Glass Porcelain Enamels Glaze and Pigment Congress, Turkey, 15 - 17 October 2014
Tribological Behaviors of Lubricating Oils with CNT and Si3N4 Nanoparticle Additives ÇÖL M. N., ÇELİK O. N., SERT A. 15th International Materials Symposium, Denizli, Turkey, 15 - 17 October 2014, pp.334-341
Contamination Phenomena and Prevention Methods In Hydraulic Systems ERGÜR H. S. 7th International Ege Energy Symposium and Exhibition-7th IEESE, Uşak, Turkey, 18 - 20 June 2014, pp.322-339
Microstructural Characterization of Surface Alloyed Al7075-T651 Aluminum Alloy by Friction Stir Processing SERT A., ÇELİK O. N. 15th International Materials Symposium, Denizli, Turkey, 15 - 17 October 2014, pp.342-347
Numerical investigation of thermal and hydraulic performance of louvered fin aluminum heat exchanger ALTUN Ö., UĞURLUBİLEK N., DOĞAN B., ERBAY L. B. XI. International HVAC+R Technology Symposium, İstanbul, Turkey, 8 - 10 May 2014, pp.169-176
Investigation of the production parameters of gas atomised aluminium and tin powders: Experimental and numerical study SOFUOĞLU M. A. 3rd International Symposium on Computing in Science Engineering, 24 - 25 October 2013
Enhancing the Anti-Wear Performance of Nano-oil Additives by Using Mixture Design and Multi-Objective Optimization Buruk Şahin Y., Aktar Demirtaş E., Burnak N., Çelik O. N. 26th European Conference on Operational Research, Rome, Italy, 1 - 04 July 2013
Bir toz tutucu siklon ayırıcının tasarımı ve sayısal metodlar kullanılarak iyileştirilmesi ERBAŞ M., SOFUOĞLU M. A., BIYIKOĞLU A., USLAN İ. 19. Ulusal Isı Bilimi ve Tekniği Kongresi, Turkey, 9 - 12 September 2013
Türkiye’deki Enerji Politikalarında Yenilenebilir Enerjinin Yeri ve Beklentileri YILDIZAY H. D., TİMURALP Ç., SERT Z. 2. Anadolu Enerji Sempozyumu, Diyarbakır, Turkey, 2 - 04 May 2013
New strategies for improvement of structural gas turbine engine parts Uzunonat Y., Üzgür S., KUŞHAN M. C. 2nd International Conference on Intelligent Materials, Applied Mechanics and Design Science, IMAMD 2013, Guangzhou, China, 13 - 14 April 2013, vol.327, pp.1368-1373
Duvaryakınındaki kare kesitli iki silindir etrafında akışın incelenmesi ve ısı geçişinin Ann ile tahmini, International Symposium on Engineering, Artificial Intelligence and Applications,Girne American University, North Cyprus, 6-8 November, 2013 Yetik Ö., Mahir N. International Symposium on Engineering, Artificial Intelligence and Applications, Girne, Cyprus (Kktc), 6 - 08 November 2013
The Design of Laser Welding Varestraint Test for Weld Susceptibity of Inconel 718 Superalloy Çevik S., Kuşhan M. C., Engin G. Materials Science and Engineering, Darmstadt, Germany, 23 - 24 September 2013
Açık Oyuk İçeren Alttan Isıtılan Yatay Kanalda Laminer Akış ve Doğal Taşınımın Sayısal Analizi TİMURALP Ç., ALTAÇ Z. 19. Ulusal Isı Bilimi ve Tekniği Kongresi, Samsun, Turkey, 9 - 12 September 2013
Bir ısı değiştiricide dış akış basınç düşümü karakteristiğinin sayısal incelenmesi UĞURLUBİLEK N., ERBAY L. B., DOĞAN B. 19. Ulusal Isı Bilimi ve Tekniği Kongresi, Turkey, 9 - 12 September 2013, pp.386-391
Cost Reduction An Aircraft Engine Part Of Turbine Disc Manufacturing Kuşhan M. C., Büyüksolak E., Çevik S., Göde E. INTERNATIONAL CONFERENCE of SCIENTIFIC PAPER AFASES 2013, Brasov, Romania, 23 May 2013 - 25 May 2103, vol.2013, pp.651-658
Bir Isı Değiştiricide Dış Akış Basınç Düşümü Karakteristiğinin Sayısal İncelenmesi DOĞAN B., ERBAY L. B. 19. Ulusal Isı Bilimi ve Tekniği Kongresi, Samsun, Turkey, 9 - 12 September 2013, vol.1, pp.386-391
Benzetim ile kesici takım verimliliğinin arttırılması SOFUOĞLU M. A., ARAPOĞLU R. A. Üretim araştırmaları sempozyumu, Turkey, 25 - 27 September 2013
Dik Kenarlarında Ayrık Isıtıcılar Bulunan Dikdörtgen Kutularda Laminer Doğal Taşınımın Sayısal Analizi SERT Z., TİMURALP Ç., ALTAÇ Z. 19. Ulusal Isı Bilimi ve Tekniği Kongresi, Samsun, Turkey, 9 - 12 September 2013
Yenilenebilir Enerji Kaynaklarının Enerji Üretimi Kalitesine Etkisi ve Eskişehir Örneği TİMURALP Ç., YILDIZAY H. D., SERT Z. 2. Anadolu Enerji Sempozyumu, Diyarbakır, Turkey, 2 - 04 May 2013
Bir ısı değiştiricide dış akış ısı transferi karakteristiğinin sayısal incelenmesi UĞURLUBİLEK N., ERBAY L. B., DOĞAN B. 19. Ulusal Isı Bilimi ve Tekniği kongresi, Turkey, 9 - 12 September 2013, pp.380-385
Spiral boru sarmallarında laminer akış ve ısı geçiş karakteristiğinin sayısal olarak incelenmesi ALTUN Ö., ALTAÇ Z. ULIBTK'13, 19. Ulusal Isı Bilimi ve Tekniği Kongresi, Samsun, Turkey, 9 - 12 September 2013
Bir Isı Değiştiricide Dış Akış Isı Transferi Karakteristiğinin Sayısal İncelenmesi DOĞAN B., ERBAY L. B. 19. Ulusal Isı Bilimi ve Tekniği Kongresi, Samsun, Turkey, 9 - 12 September 2013, vol.1, pp.380-385
Havacılıkta Standartizasyonun Önemi Kuşhan M. C. Uluslararası “Standardizasyonun Küresel Ekonomiye Etkileri Sempozyumu”, İstanbul, Turkey, 25 - 26 November 2013
Troubleshooting for Relief Valves Used in Hydraulic Systems PANCAR Y., ERGÜR H. S. IX International Congress ”Machines, Technologies, Materials” MTM 2012, Varna, Bulgaria, 18 - 21 September 2012, vol.6, pp.19-21
Pressure Relief Valve Selection and Applicationsfor Hydraulic Systems ERGÜR H. S. IX International Congress ”Machines, Technologies, Materials” MTM 2012, Varna, Bulgaria, 18 - 21 September 2012, vol.6, pp.22-25
Konutlarda enerji ve su tüketiminin tahmini ARAS H., SOFUOĞLU M. A. Üretim araştırmaları sempozyumu, Turkey, 27 - 29 September 2012
The Effect of Laser Glazing on High Temperature Oxidation Resistance of Thermal Barrier Coatings DİLTEMİZ S. F., KUŞHAN M. C. International Conference on Materials Science and Information Technology (MSIT 2011), Singapore, Singapore, 16 - 18 September 2011, pp.315-316
Numerical Analysis of Entropy Generation at the Entrance of a Channel DOĞAN B., ERBAY L. B. EWRES - European Workshop on Renewable Energy Systems, Antalya, Turkey, 17 - 28 September 2012, vol.1
Eskişehir İlindeki Tarım Alet ve Makine Üreticilerinin Genel Durumları Üzerine Bir Araştırma ER Ü., GÖKEL S. 27. Tarımsal Mekanizasyon Ulusal Kongresi, Samsun, Turkey, 5 - 07 September 2012, pp.105-114
MoSi2 Composites for High Temperature Structural Applications Uzunonat Y., Uzgur S., Diltemiz S. F., Kushan M. C., Olmez R. International Conference on Key Engineering Materials, Sanya, PEOPLES R CHINA, 25 - 27 March 2011, vol.214, pp.103-105
Eğrisel olarak yakınsayan halka türbülatörlerin ısıl başarıma etkisi UĞURLUBİLEK N. 18. Ulusal Isı Bilimi ve Tekniği Kongresi, Turkey, 7 - 10 September 2011, pp.486-490
Dik kesme için tornalamada tırlama titreşimlerinin süreç sönümleme oranlarının hesaplanması ORAK S., TÜRKEŞ E. 15. Ulusal Makina Teorisi Sempozyumu UMTS 2011 Niğde Üniversitesi Mühendislik Fakültesi, Niğde, Turkey, 16 - 18 June 2011, pp.223-233
Hidrolik Sistemlerde Kullanılan Bitki Esaslı Hidrolik Sıvılar ERGÜR H. S. VI. Ulusal idrolik Pnömatik Kongresi, İzmir, Turkey, 12 - 15 October 2011
Ann based optimization of a solar assisted hybrid cooling system in Turkey ÖZGÜR M. A., YETİK Ö., ARSLAN O. IGEC VI, 5 - 07 June 2011
New Strategies for Improvement of Structural Gas Turbine Engine Parts UZUNONAT Y., ÇEVİK S., KUŞHAN M. C. International Conference on Mechanical Engineering, Robotics and Aerospace, 20 October 2011 - 22 October 2012, vol.1
İmportance of Examining Weibull Distribution Fitting in Determining Wind Power ARSLAN M. S. T., AÇIKKALP E., ARAS H., YILMAZ V. 10th International Conference on Sustainable Energy Technologies (SET2011), 4 - 07 September 2011
STATE-OF-ART TECHNOLOGY ALLVAC 718 Plus SUPERALLOY FOR GAS TURBINE ENGINE PARTS Uzgur S., UZUNONAT Y., Diltemiz F., KUŞHAN M. C., Gunay R. International Conference on Advanced Material Research, Chongqing, China, 21 - 23 January 2011, vol.213, pp.131-132
Mobile robot localization via outlier rejection in sonar range sensor data Yılmaz S., Ezercan Kayır H. H., Kaleci B., Parlaktuna O. 2011 7th International Conference on Electrical and Electronics Engineering (ELECO), Bursa, Turkey, 1 - 04 December 2011, vol.2, pp.434-438
Hidrolik Akümülatörler Kullanım Amaçları ve Yöntemleri ile Seçim Kriterleri PANCAR Y., ERGÜR H. S. VI. Ulusal Hidrolik Pnömatik Kongresi, İzmir, Turkey, 12 - 15 October 2011
Investigation of Lubrication and Wear Properties of Biodiesel and Diesel Fuels on Fuel Pump Material TAT M. E., ÇELİK O. N., KNOTHE G., ER Ü., GAŞAN H., ULUTAN M. World Conference on Oilseed Processing, Fats & Oils Processing, Biofuels & Applications, İzmir, Turkey, 21 - 23 June 2011
Effect of Lubrication and Wear Properties of Biodiesel added Ultra Low Sulfur Diesel (ULSD) Fuel on Common Rail Fuel Injection Pump Material TAT M. E., ÇELİK O. N., KNOTHE G., ER Ü., GAŞAN H., ULUTAN M. World Conference on Oilseed Processing, Fats & Oils Processing, Biofuels & Applications, İzmir, Turkey, 21 - 23 June 2011, pp.34
Parçacık Süzgeci Tabanlı Konumlandırma Yöntemi için Yeni Bir Algılayıcı Modeli YILMAZ S., EZERCAN KAYIR H. H., KALECİ B., PARLAKTUNA O. Otomatik Kontrol Türk Milli Komitesi – Otomatik Kontrol Ulusal Toplantısı, Gebze-Kocaeli, Turkey, 21 - 23 September 2010, pp.298-303
The Investigation Of Adhesive Wear Properties Of Borided AISI 316 L Stainless Steel ÇELİK O. N., SERT A., YILMAZ A. 13th International Materials Symposium, Denizli, Turkey, 13 - 15 October 2010, pp.253
RADIATIVE TRANSFER IN ISOTROPICALLY SCATTERING TWO-LAYERED THREE DIMENSIONAL RECTANGULAR ENCLOURES ALTAÇ Z., TEKKALMAZ M. 6th International Symposium on Radiative Transfer (RADIATIVE TRANSFER), Antalya, Turkey, 13 - 19 June 2010
A New Sensor Model for Particle-Filter Based Localization in the Partially Unknown Environments YILMAZ S., Kayir H. E., KALECİ B., PARLAKTUNA O. IEEE International Conference on Systems, Man and Cybernetics, İstanbul, Turkey, 10 - 13 October 2010
Laminar Natural Convection Heat Transfer And Air Flow In Cubic Enclosures with Pin Fins attached to Hot Wall ALTAÇ Z., SERT Z. SEVENTH INTERNATIONAL CONFERENCE ON HEAT TRANSFER, FLUID MECHANICS AND THERMODYNAMICS (HEFAT2010), Antalya, Turkey, 19 - 21 July 2010, pp.1545-1550
An Application on Line and Corner Detection Method by Using Laser Beams Demir G., YILMAZ S., EZERCAN KAYIR H. H., KALECİ B., YAZICI A., PARLAKTUNA O. 1st International Symposium on Computing in Science and Engineering, 3 - 05 June 2010
Investigation of material dependence for process damping in the chatter vibrations TÜRKEŞ E., NEŞELİ S., YALDIZ S., ORAK S. 13th International Materials Symposium (IMPS'2010), Denizli, Turkey, 13 - 15 October 2010
Repealing Range Sensor Model Approach for Particle Filter Based Mobile Robot Localization Using Sonar Data YILMAZ S., EZERCAN KAYIR H. H., KALECİ B., PARLAKTUNA O. International Symposium on INnovations in Intelligent SysTems and Applications, Kayseri, Turkey, 21 - 24 June 2010, pp.476-480
Tornalamada tırlama titreşimleri için süreç sönümleme modeli TÜRKEŞ E., ORAK S., NEŞELİ S. 2. Ulusal Talaşlı İmalat Sempozyumu Selçuk Üniversitesi, Konya, Turkey, 1 - 02 October 2010, pp.328-342
TIG Yöntemiyle Yüzey Özellikleri Değiştirilen AISI 8620 Çeliğinin Adhesif Aşınma Özelliklerinin İncelenmesi ÇELİK O. N., ULUTAN M., BUYTOZ S., GAŞAN H., ER Ü. 13th International Materials Symposium IMSP'2010, Denizli, Turkey, 13 - 15 October 2010, pp.1504-1511
Dış Yüzeyinde Kaynama Olan Isı Eşanjörü Borusunda Yüzey Sıcaklığına Bağlı Olarak Dış Yüzey Isı Taşınım Katsayısının Sayısal Olarak Hesaplanması UĞURLUBİLEK N. 17. Ulusal Isı Bilimi ve Tekniği Kongresi, Turkey, 24 - 27 June 2009, pp.512-515
Radiative transfer in participating isotropically scattering inhomogeneous three dimensional rectangular enclosures TEKKALMAZ M., ALTAÇ Z. Eurotherm Semiar No. 83-Computational Thermal Radiation in Participating Media III, lizbon, Portugal, 15 - 17 April 2009
Numerical investigation of convective heat transfer and fluid flow in a channel with two semi circular shaped obstacles UĞURLUBİLEK N. International Symposium on Engineering and Architectural Sciences of Balkan, Caucasus and Turkıc Republics, 22 - 24 October 2009, vol.2, pp.124-129
Radiative transfer in isotropically scattering two layered three dimensional enclosures ALTAÇ Z., TEKKALMAZ M. ixth International Symposium on Radiative Transfer, 13 - 19 June 2010
A New Approach to Improve the Success Ratio and Localization Duration of a Particle Filter Based Localization for Mobile Robots YILMAZ S., KALECİ B., EZERCAN KAYIR H. H., PARLAKTUNA O. 6th International Conference On Electrical and Electronics Engineering, Bursa, Turkey, 5 - 08 November 2009, vol.2, pp.370-374
Experimental analysis of the effect of humidity on the performance of a heat pump water heating system Öztürk M. M., ERBAY L. B. 22nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2009, Foz du Iguacu, Parana, Brazil, 30 August - 03 September 2009, pp.759-766
Katılımcı üç boyutlu dikdörtgen ortamda ışınım ısı transferinin kesikli ordinatlar metodu DOM ile hesabı TEKKALMAZ M., ALTAÇ Z. 17. Ulusal Isı Bilimi ve Tekniği Kongresi (ULIBTK'09), Turkey, 24 - 27 June 2009
Gezgin Robotlarda Parçacık Süzgeci Tabanlı Konumlandırma ve Seyrüsefer Yöntemi YILMAZ S., EZERCAN KAYIR H. H., KALECİ B., PARLAKTUNA O. Otomatik Kontrol Türk Milli Komitesi – Otomatik Kontrol Ulusal Toplantısı, İstanbul, Turkey, 13 - 16 October 2009, pp.354-359
Gezgin Robotlarda Parçacık Süzgeci Tabanlı Konumlandırma Yönteminde Algılayıcı Veri Hassasiyeti Analizi YILMAZ S., EZERCAN KAYIR H. H., KALECİ B., PARLAKTUNA O. Elektrik, Elektronik, Bilgisayar, Biyomedikal Mühendisliği 13. Ulusal Kongresi, Ankara, Turkey, 23 - 26 December 2009, pp.145-150
Dairesel Kesitli Helisel Kanallarda Laminer Akış ve Isı Geçişinin Parametrik Analizi ALTAÇ Z., SERT Z., TİMURALP Ç. 17. Ulusal Isı Bilimi ve Tekniği Kongresi, Sivas, Turkey, 24 - 27 June 2009
Endüstriyel Tip Bir Bisküvi Fırının Deneysel Isıl Analizi 17 Ulusal Isı Bilimi ve Tekniği Kongresi Bildiri Kitabı DOĞAN B., ERBAY L. B. 17. Ulusal Isı Bilimi ve Tekniği Kongresi, Sivas, Turkey, 24 - 27 June 2009, vol.1, pp.843-849
THE EFFECT OF PORE SHAPE TO THE EFFECTIVE THERMAL CONDUCTIVITY OF THERMAL BARRIER COATINGS Altun Ö., Boeke Y. E. ASME Heat Transfer Summer Conference, Florida, United States Of America, 10 - 14 August 2008, pp.449-457
Borlu Çelikler ve Tarımsal Mekanizasyonda Kullanım Alanları ER Ü. 25. Tarımsal Mekanizasyon Ulusal Kongresi, Isparta, Turkey, 1 - 03 October 2009, pp.425-428
Katılımcı iki boyutlu dikdörtgen ortamda ışınım ısı transferinin kesikli ordinatlar metodu DOM ile hesabı TEKKALMAZ M., ALTAÇ Z. 17. Ulusal Isı Bilimi ve Tekniği Kongresi (ULIBTK'09), Turkey, 24 - 27 June 2009
Lazer Flaş Yöntemini Kullanarak Malzemelerin Isı İletim Katsayısının Deneysel Olarak Tayin Edilmesi ve Örnek Bir Uygulama ALTUN Ö. VII. Ulusal Ölçümbilim Kongresi, İzmir, Turkey, 30 October - 01 November 2008
A search for THORIMS-NES from exergetic point of view ERBAY L. B., Furukawa K., Kamei T., Mitachi K., Yoshioka R., Kato Y. 21st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2008, Cracow-Gliwice, Poland, 24 - 27 June 2008, pp.1375-1384
The use of Artificial Neural Network in thermal systems Öztürk M. M., ERBAY L. B. 21st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2008, Cracow-Gliwice, Poland, 24 - 27 June 2008, pp.781-788
Effect of the Microstructure of EB PVD Thermal Barrier Coatings on the Thermal Conductivity and the Methods to Reduce the Thermal Conductivity ALTUN Ö., BÖKE Y. E. 12th International Materials Symposium, Denizli, Turkey, 15 - 17 October 2008, vol.1, pp.367-375
Kapalı Dikdörtgen Kanaldaki Bir İnce İzotermal Plakanın Farklı Konumlarda Doğal Taşınım İle Isı Transferinin İncelenmesi ALTAÇ Z., SERT Z. IV. EGE ENERJİ SEMPOZYUMU, İzmir, Turkey, 21 - 23 May 2008, pp.65-72
Yarı küresel Engel Konulan Bir Kanal İçerisinde Akışın ve Isı geçişinin Sayısal olarak İncelenmesi UĞURLUBİLEK N. Bilimde Modern Yöntemler Sempozyumu, Eskişehir, Turkey, 15 - 17 October 2008, vol.2, pp.575-581
Exergetic analysis of heat pump water heaters Cerit E., Sariçay T., ERBAY L. B. 21st International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2008, Cracow-Gliwice, Poland, 24 - 27 June 2008, pp.381-389
Mühendislik Eğitimlerinde Ölçümbilim ve Kalibrasyon Konularındaki Mevcut Durumun Değerlendirilmesi ALTUN Ö. VII. Ulusal Ölçümbilim Kongresi, İzmir, Turkey, 30 October - 01 November 2008
A road map for the realization of global-scale thorium breeding fuel cycle by single molten-fluoride flow Furukawa K., Arakawa K., ERBAY L. B., Ito Y., Kato Y., Kiyavitskaya H., et al. 13th International Conference on Emerging Nuclear Energy Systems 2007, ICENES 2007, İstanbul, Turkey, 3 - 08 June 2007, vol.1, pp.5-32
Tornalama için tırlamada süreç sönümleme oranlarının hesabı Kısım1 Matematik Model TÜRKEŞ E., ORAK S., ALANYALI S. Ulusal Teknik Eğitim, Mühendislik ve Eğitim Bilimleri Genç Araştırmacılar Sempozyumu (UMES'07), Kocaeli, Turkey, 20 - 22 June 2007, vol.2, pp.686-690
Tornalama için tırlamada süreç sönümleme oranlarının hesabı Kısım 2 Uygulama TÜRKEŞ E., ORAK S., ALANYALI S. Ulusal Teknik Eğitim, Mühendislik ve Eğitim Bilimleri Genç Araştırmacılar Sempozyumu (UMES'07), Kocaeli, Turkey, 20 - 22 June 2007, vol.2, pp.691-694
Radiative transfer in participating isotropically scattering inhomogeneous three dimensional rectangular enclosure TEKKALMAZ M., ALTAÇ Z. Fifth International Symposium on Radiative Transfer, bodrum, Turkey, 17 - 22 June 2007
Numerical analysis of flow exergy destruction in parallel plate microchannels ERBAY L. B., Ercan M. S., Öztürk M. M. 20th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2007, Padova, Italy, 25 - 28 June 2007, vol.1, pp.365-372
An investigation on fatigue life of borided AISI 1010 steel ÇELİK O. N., GAŞAN H., ULUTAN M., MURAT S. Proceedings of 12th International Materials Symposium(IMSP'2008), Denizli, Turkey, 15 - 17 October 2008, pp.123-130
Application of synthetic kernel SKN approximation to radiative transfer problems in participating linearly anisotropically scattering homogeneous and inhomogeneous solid spherical medium TEKKALMAZ M., ALTAÇ Z. Fifth International Symposium on Radiative Transfer, 17 - 22 June 2007
The Application of MoSi2 as High Temperature Materials in Gas Turbine Engines KUŞHAN M. C., diltemiz S. F., UZUNONAT Y. The Fifth International Conference on High Performance Ceramics, 10 - 13 May 2007, vol.1, pp.135-136
Numerical investigation of the effects of reynolds number to the flow and heat transfer characteristics of the water flow inside multi-port minichannels Mutlu E., ERBAY L. B. 20th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, ECOS 2007, Padova, Italy, 25 - 28 June 2007, vol.1, pp.373-379
Solution of the radiative transfer problems in two-dimensional participating cylindrical medium with isotropic scattering using the SKN approximation Doner N., ALTAÇ Z. 9th International Conference on Advanced Computational Methods in Heat Transfer, Ashurst, United Kingdom, 01 July 2006, vol.53, pp.109-111
Mekanik alaşımlama yöntemi ile üretilen amorf Mg50Ni50 alaşımının ısıl kararlılığı AYBAR K., AYDINBEYLİ N., GAŞAN H., ÇELİK O. N. 11. Uluslararası Denizli Malzeme Sempozyumu, 19 - 21 April 2006, pp.755-759
Bazı Borlu Çeliklerin Toprak İşleme Aletlerinin Uç Demirlerinde Kullanımının Laboratuvar Koşullarında İncelenmesi ER Ü., GAŞAN H. 23. Tarımsal Mekanizasyon Ulusal Kongresi, Çanakkale, Turkey, 6 - 08 September 2006, pp.293-296
Failure Analyses of an Cessna 185 Aircraft Propeller Kuşhan M. C., Diltemiz S. F., Saçkesen İ. Second International Conference on Engineering Failure Analyses, Toronto, Canada, 12 - 15 September 2006, vol.1, pp.23
Frezeleme için tırlama titreşiminde kesme proses sönümlemesinin incelenmesi TÜRKEŞ E., ORAK S. TİMAK CAD-CAM Günleri 06 Tasarım İmalat Analiz Kongresi Balıkesir Üniversitesi MMF, Balıkesir, Turkey, 26 - 28 April 2006, pp.212-222
Yutan yayan ve izotropik olarak saçan homojen iç içe küre ortamlarda ışınım ısı transferinin SKN yöntemi ile hesabı TEKKALMAZ M., ALTAÇ Z. 15. Ulusal Isı Bilimi ve Tekniği Kongresi (ULIBTK'05), Turkey, 7 - 09 September 2005
Tornalama için tırlama titreşiminde kesme proses sönümlemesinin incelenmesi ORAK S., TÜRKEŞ E. 1. Uluslararası Mesleki ve Teknik Eğitim Teknolojileri Kongresi, İstanbul, Turkey, 5 - 07 September 2005, pp.1094-1104
Estimation of Monthly Wind Speed by Using Arima Exponantial Smoothing Technique YILMAZ V., ARAS H., ARAS N., ÇELİK H. E. The First Cappadocia International Mechanical Engineering Symposium, 14 - 16 July 2004
Estimation of Monthly Wind Speed by Using Least Squares and Exponential Smoothing Technique YILMAZ V., ARAS H., ARAS N., ÇELİK H. E. The First Cappadocia International Mechanical Engineering Symposium, 14 - 16 June 2004, pp.118-120
Bor Yayınımıyla Yüzeyi Sertleştirilmiş AISI 1040 Çeliğinin Abrazif Aşınma Davranışı ER Ü., PAR B. 1. Ulusal Metalurji ve Malzeme Günleri, Eskişehir, Turkey, 27 - 28 May 2004, pp.11-20
Ostemperlenmiş Küresel Grafitli Dökme Demirlerde Isıl İşlem Şartlarının Sertliğe Etkisi KOMAÇ O. Ş., ÇELİK O. N. 1. Ulusal Metalurji ve Malzeme Günleri, Turkey, 27 - 28 May 2004
A Robotic Exoskeleton Tracking Human Hand Motions Kasap M., ZAFER N., YILMAZ S. 1st Cappadocia Int. Mech. Eng. Symposium (CMES-1), Nevşehir, Turkey, 14 - 16 July 2004, vol.2, pp.764-766
The SKN approximation for solving radiative transfer problems in rectangular participating and isotropically scattering inhomogeneous medium TEKKALMAZ M., ALTAÇ Z. Fourth International Symposium on Radiative Transfer, 20 - 25 June 2004
A New Algorithm, in Collision Detection and Applications to Robotics ZAFER N., Serdar Murat D. 1st Cappadocia Int. Mech. Eng. Symposium (CMES-1), Nevşehir, Turkey, 14 - 16 July 2004, vol.2, pp.845-848
A Robotic Exoskeleton Tracking Human Hand Motion KASAP M., ZAFER N., YILMAZ S. 1st Cappadocia International Mechanical Engineering Symposium, Cappadocia, Turkey, 14 - 16 July 2004, vol.2, pp.764-766
Frequency Optimization of a Vehicle Hood KUŞHAN M. C., ZAFER N. The First Cappadocia Mechanical Engineering Symposium, Niğde, Turkey, 14 - 16 July 2004
The Abrasive Wear Behaviour of Boronized and Untreated AISI 1008 and AISI 1045 Steels ER Ü., PAR B. 2nd International Boron Symposium, Eskişehir, Turkey, 23 - 25 September 2004, pp.207-212
Chatter Suppression in Turning ZAFER N., TÜRKEŞ E. 1st Cappadocia Int. Mech. Eng. Symposium (CMES-1), Nevşehir, Turkey, 14 - 16 July 2004, vol.2, pp.803-808
Uçak Yapı Malzemeleri KUŞHAN M. C., ZAFER N. I. UlusalMetalurji ve Malzeme Gunleri, Eskişehir, Turkey, 27 - 28 May 2004
Estimation of Monthly Wind Speeds of Eskişehir, Turkey ARAS H., YILMAZ V., ÇELİK H. E. First International Exergy, Energy and Environmental Symposium, 13 - 17 July 2003, pp.1043-1045
Takım tezgahlarında dinamik dengeleme TÜRKEŞ E., ZAFER N., KÖSE R. 3. Uluslararası İleri Teknolojiler Sempozyumu, Ankara, Turkey, 18 - 20 August 2003, pp.278-290
Türkiye Uçak Mühendisliği Eğitiminde Bakım Mühendisliğinin Önemi KUŞHAN M. C. 2. Ulusal Uçak Havacılık ve Uzay Mühendisliği Kurultayı, Eskişehir, Turkey, 10 May 2003, vol.1, pp.79-84
A Method for the Investigation of Superalloys Weldability KUŞHAN M. C., Saraçyakupoğlu t., erdem m. Advanced Engineering Design, Prag, Czech Republic, 1 - 04 June 2003, vol.1, pp.21-22
Radiative transfer in rectangular absorbing emitting and isotropically scattering homogeneous medium using exact discrete ordinate and synthetic kernel methods ALTAÇ Z., TEKKALMAZ M. Eurotherm Semiar No. 73-Computational Thermal Radiation in Participating Medium, Mons, Belgium, 15 - 17 April 2003
Bakım Mühendisliği ve Yeni Teknikler ZAFER N., TÜRKEŞ E., Kasap M. TMMOB Bakım Teknolojileri Kongre ve Sergisi, Denizli, Turkey, 16 - 19 October 2003, pp.325-330
Konvansiyonel takım tezgahlarında tasarım TÜRKEŞ E., KÖSE R., ZAFER N. 3. Uluslararası İleri Teknolojiler Sempozyumu, Ankara, Turkey, 18 - 20 August 2003, pp.154-167
A Review on Surface Hardening with Boron Diffusion Process and its Application in Agricultural Mechanization ER Ü., PAR B. 8th International Congress on Mechanization and Energy in Agriculture, Aydın, Turkey, 15 - 17 October 2002, pp.57-62
Impedance Fields for Trajectory Enhancement in the Intelligent Assist Device Luecke G. R., KL T., ZAFER N. IEEE Int. Conference on Robotics and Automation (ICRA 2000), San-Francisco, Costa Rica, 24 - 28 April 2000, vol.3, pp.2783-2788
A new Weldabilty Test Method For Some Aero Engine Materials KUŞHAN M. C. Kazakistan Devlet Üniversitesi Kongresi, 1 - 04 October 2002, vol.1, pp.26-29
EB Varestraint Test Method and an Application KUŞHAN M. C., Saraçyakupoğlu T., erdem m. 23rd ICAS Congress, Toronto, Canada, 8 - 02 September 2002, vol.1, pp.8631-8634
Boriding of a Ploughshare Material on Plough Body and Investigation of its Wear Resistance ER Ü., PAR B. 8th International Congress on Mechanization and Energy in Agriculture, Aydın, Turkey, 15 - 17 October 2002, pp.51-56
The SKN approximation for solving radiation transport problems in absorbing emitting and scattering rectangular geometries ALTAÇ Z., TEKKALMAZ M. Third International Symposium on Radiative Transfer, 17 - 22 June 2001
Constraint coupling of force and motion between real and virtual mechanisms Luecke G. R., ZAFER N. SPIE - Telemanipulator and Telepresence Technologies VII, Boston, MA, United States Of America, 02 March 2001, vol.4195, pp.331-339
Breakage Characterization of Pyrite by Image Analyzer BOZKURT R., TAŞDEMİR A., ÇELİK O. N. 7th International Mineral Processing Symposium, İstanbul, Turkey, 15 - 17 September 1998, pp.49-54
Design parameters of a thermionic energy converter ERBAY L. B., YAVUZ H. S. Proceedings of the International Conference on Thermodynamic Analysis and Improvement of Energy Systems, TAIES'97, Beijing, China, 10 - 13 June 1997, pp.20-24
Baca Gazlarındaki Geri Kazanılabilir Enerji ve Yüksek Sıcaklık Uygulamaları ARAS H. Çevre ve Enerji Kongresi Antalya Sempozyumu, Antalya, Turkey, 14 - 15 April 1997, pp.208-213
Türkiye’xxde Doğlagaz ve Çevre Politikaları ARAS H. Isparta da Hava Kirliliği ve Doğalgaz 97, Turkey, 1 - 02 January 1997, pp.215-219
Bir tarım traktörünün modellenmesi ve sürücü oturağının parametrik optimizasyonu ORAK S., PAR B. 6. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi, Ankara, Turkey, 2 - 06 September 1996, pp.315-322
Taşıt titreşimlerinin teorik analizi ve bir bilgisayar modellemesi ER Ü., ORAK S., PAR B. Süleyman Demirel Üniversitesi Mühendislik Mimarlık Fakültesi IX. Mühendislik Sempozyumu, Isparta, Turkey, 29 - 31 May 1996, pp.58-68
EB ve TIG Kaynaklı Inconel 718’in Kaynak Sonrası Çökelme Mekanizmasındaki Farklılıklar yaman m., KUŞHAN M. C. 1. Uluslararası Havacılık ve İleri Teknolojiler Sempozyumu, 8 - 10 March 1995, vol.1, pp.413-421
Traktör titreşimlerinin modellenmesi ve bilgisayarda çözümü ORAK S., PAR B. III.Balıkesir Mühendislik Mimarlık Sempozyumu, Balıkesir, Turkey, 10 - 11 April 1995, pp.131-136
Güneş Enerjisi ile Soğutma (Absorbsiyonlu) Sistemi Uygulalaması ARAS H., TANER K. 5. Türk Alman Enerji Sempozyumu, İzmir, Turkey, 19 - 21 April 1995, pp.58-67
Traktör sürücü sandalyesinin yalıtım özelliklerinin deneysel olarak incelenmesi ORAK S. I. Ulusal Deneysel Mekanik Sempozyumu (İTÜ), İstanbul, Turkey, 28 - 30 September 1994, pp.55-61
Doğal Gaz Yakan Sistemlerde Atık Isı Kazanımı ARAS H., Taner K. 8. Ulusal Isı Bilimi ve Tekniği Kongresi, Turkey, 1 September - 04 January 1991, pp.105-110
Expert Reports
Bilirkişi Raporu Kuşhan M. C., Ay G. M., Kaya E. Eskişehir Tüketici Mahkemesi, pp.3, Eskişehir, 2022

Published journal articles indexed by SCI, SSCI, and AHCI

Articles Published in Other Journals

Books & Book Chapters

Refereed Congress / Symposium Publications in Proceedings

Expert Reports