| AVESİS

Yayın Türü

Yayın Alt Türü

(WOS) Araştırma Alanları

SDG

Araştırmacılar

Yıl


Compression Tunable Acoustic Foam Composites Enhanced by Shear Stiffening Gels, Shear Thickening Fluids, and CNTs Sheıkhı M. R., Li J., Xie Z., Gürgen S. COMPOSITES PART B: ENGINEERING , cilt.314, ss.1-20, 2026 (SCI-Expanded, Scopus)
Guest editorial: Innovative approaches in aviation: trends and challenges Ekici S., Ayar M., YAZAR I. Aircraft Engineering and Aerospace Technology , cilt.98, sa.2, ss.153, 2026 (SCI-Expanded, Scopus)
STF intercalated cork laminates under oblique impact conditions Eroğlu E., Gürgen S., Fernandes F. COMPOSITE STRUCTURES , cilt.377, ss.1-13, 2026 (SCI-Expanded, Scopus)
Analyses of rotating detonation engine with aerospike nozzle under different ambient pressures Aslan N. C., Kara E., GÜLEREN K. M. International Journal of Hydrogen Energy , cilt.214, 2026 (SCI-Expanded, Scopus)
Multifunctional properties of cellular composites based on smart materials for energy-absorbing applications Sheikhi M. R., GÜRGEN S., Hassanzadeh M., Xie Z., Li J. Archives of Civil and Mechanical Engineering , cilt.25, sa.4, 2025 (SCI-Expanded, Scopus)
Environmental analyses and sustainability performance evaluations of AVGAS and hydrogen-powered piston-prop engines for aircraft flight Envelope YAZAR I., AKDENİZ H. Y., Balli O. International Journal of Hydrogen Energy , cilt.142, ss.1235-1248, 2025 (SCI-Expanded, Scopus)
Enhanced Compression Properties of Open-Cell Foams Reinforced with Shear-Thickening Fluids and Shear-Stiffening Polymers Li J., Zhou Y., SHEIKHI M. R., GÜRGEN S. POLYMERS , cilt.17, sa.9, 2025 (SCI-Expanded, Scopus)
Comparative multiphase flow analysis of dry and wet marine exhaust systems based on thermal, pressure, and turbulence characteristics GÖRGÜLÜ Y. F., EKİCİ S., KARAKOÇ T. H. PRUEBAS , cilt.1, sa.1, ss.21-28, 2025 (Hakemli Dergi)
Structural Analysis of Different Hinge Positions on the Mechanical Behavior of a Wooden Door System Using ANSYS GÖRGÜLÜ Y. F., MERDAN R. Bitlis Eren Üniversitesi Fen Bilimleri Dergisi , cilt.14, sa.1, ss.243-259, 2025 (TRDizin)
UHMWPE based composites with CNT fillers: Surface, mechanical and electrical aspects Ardic S., Kunt G., GÜRGEN S., PAT S. MATERIALS RESEARCH BULLETIN , cilt.192, 2025 (SCI-Expanded, Scopus)
Influence of heat treatments and hot isostatic processes (HIP) on microstructure and mechanical behavior of Ti-6Al-4V alloy produced by Powder Bed Fusion Using Electron Beam (PBF-EB) Karasoglu M., Yasa E., Tan E., Kavak S., Söylemez E., KUŞHAN M. C. KOVOVE MATERIALY-METALLIC MATERIALS , cilt.63, sa.5-6, ss.331-356, 2025 (SCI-Expanded, Scopus)
Gamma-ray and neutron attenuation of carbon fiber/epoxy composites with carbon nanotubes and boron nitride nanoparticles for passive shielding applications in space PEKER M. Y., Erbay O., Çetin M. E., Reyhancan İ. A., Avci A. Polymer Composites , cilt.46, sa.8, ss.6983-6997, 2025 (SCI-Expanded, Scopus)
Numerical analysis of the impact of release timing on trajectory in internal store separation Turk S., GÜLEREN K. M. AERONAUTICAL JOURNAL , cilt.129, sa.1335, ss.1361-1380, 2025 (SCI-Expanded, Scopus)
Drag and Heat Reduction for Blunt Bodies in Hypersonic Flows Using a Novel Double Aerodisk Mohamed M. A., Bekir B. N., GÜLEREN K. M., Faizan M., Afgan I. Engineered Science , cilt.33, 2025 (Scopus)
Effects of PCM on cooling of battery module Akpinar C., Yetik O., Karakoc T. H. AIRCRAFT ENGINEERING AND AEROSPACE TECHNOLOGY , 2025 (SCI-Expanded, Scopus)
Performance Analysis of Fluid-Core Whipple Shields under Hypervelocity Impact at different projectile speeds Pai A., Rodriguez-Millan M., Gürgen S., Piccholiya A., Mujumdar N., Shenoy S. Defence Technology , cilt.43, sa.1, ss.1-16, 2025 (SCI-Expanded)
Numerical modelling of a CAN combustion chamber with swirler using probability density functions (PDF) and eddy dissipation model (EDM) ASLAN N. C., GÜLEREN K. M., Faizan M., Afgan I. Results in Engineering , cilt.28, 2025 (ESCI, Scopus)
Numerical analysis of thermo-hydraulic performance of molten salt coolant flowing through a louvered-fin compact heat exchanger DOĞAN B., ÖZTÜRK M. M., ERBAY L. B. Journal of Thermal Engineering , cilt.11, sa.6, ss.1781-1797, 2025 (ESCI, Scopus, TRDizin)
Repair Analysis of Overlay Woven Fabric CFRP Laminates Baysallı O., Cambaz A., GÖRGÜLÜ Y. F., Uluoglu A., HARMAN U. U. SAKARYA UNIVERSITY JOURNAL OF SCIENCE , cilt.28, sa.2, ss.333-343, 2024 (Scopus, TRDizin)
Shear thickening fluids in cork composites for impact mitigation: the role of fumed silica concentration Oliveira L., Serra G., Gürgen S., Novais R., De Sousa R. A., Fernandes F. ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING , cilt.24, ss.1-12, 2024 (SCI-Expanded, Scopus)
Centrifugal Pump Optimization via Integration of Machine Learning and Computational Fluid Dynamics Rabbani S., GÜLEREN K. M., Afgan I. Engineered Science , cilt.30, 2024 (Scopus)
Predicting compressor mass flow rate using various machine learning approaches Yazar I., Anagün Y., Işık Ş. International Journal of Turbo and Jet Engines , 2024 (SCI-Expanded, Scopus)
DÖNEN PATLAMA MOTORLARINDAKİ OLUŞAN DALGA YAPISININ SAYISAL OLARAK İNCELENMESİ KOCAASLAN O., GÜLEREN K. M., SARACOĞLU B. H., YASA T. Isı Bilimi ve Tekniği Dergisi , cilt.44, sa.1, ss.33-45, 2024 (SCI-Expanded, Scopus, TRDizin)
Shear thickening fluid (STF) in engineering applications and the potential of cork in STF-based composites Serra G. F., Oliveira L., Gürgen S., De Sousa R. J. A., Fernandes F. A. ADVANCES IN COLLOID AND INTERFACE SCIENCE , ss.1-20, 2024 (SCI-Expanded, Scopus)
Speed controller design for turboshaft engine using a high-fidelity AeroThermal model YAZAR I. INTERNATIONAL JOURNAL OF TURBO & JET-ENGINES , 2024 (SCI-Expanded, Scopus)
Force attenuation performance in sandwich structures with STF and M-STF encapsulation Sheikhi M. R., Bayrak K., Özdemir E., Gürgen S. HELIYON , cilt.10, ss.1-14, 2024 (SCI-Expanded, Scopus)
Isı Transferi Problemi için Sabit Modelli Çoklu Ağ Şemalarının Değerlendirilmesi TEKÇE M. S., GÜLEREN K. M. Isı Bilimi ve Tekniği Dergisi , cilt.44, sa.2, ss.322-338, 2024 (SCI-Expanded, Scopus, TRDizin)
Vibration suppression and surface quality enhancement in milling thin-walled structures using shear thickening fluids Sheikhi M. R., Gürgen S., Li J. JOURNAL OF MANUFACTURING PROCESSES , cilt.1, ss.1-20, 2024 (SCI-Expanded, Scopus)
Enhanced anti-impact resistance of polyurethane foam composites with multi-phase shear thickening fluids containing various carbon nanofillers Sheikhi M. R., Hasanzadeh M., Gürgen S., Li J. MATERIALS TODAY COMMUNICATIONS , cilt.38, ss.1-14, 2024 (SCI-Expanded, Scopus)
Effects of Porosity on CFRP Repair Performance with Aerospace Applications Baysallı O., Cambaz A., GÖRGÜLÜ Y. F. Journal of aviation (Online) , cilt.8, sa.1, ss.1-6, 2024 (TRDizin)
Global Navigation Satellite System (GNSS) Independent Navigation for Unmanned Aerial Vehicles (UAV) göde e., teoman A., KUŞHAN M. C., Tonbul K., ÖĞÜNÇ G. İ., Daz B. Journal of Aviation Research , cilt.6, ss.20-29, 2024 (Hakemli Dergi)
MOTORSUZ UÇUŞ DURMAZ O., KUŞHAN M. C. Mühendis ve Makina , cilt.183, sa.1, ss.17-23, 2024 (TRDizin)
Effect of Heat Treatment and Hot Isostatic Pressing on the Corrosion Behavior of Ti6Al4 V Parts Produced by Electron Beam Melting Additive Manufacturing Technology Karasoglu M., ÖTEYAKA M. Ö., YASA E., Tan E., KUŞHAN M. C. ACS Omega , cilt.9, sa.27, ss.29904-29916, 2024 (SCI-Expanded, Scopus)
Shear thickening fuids in cork composites for impact mitigation: the role of fumed silica concentration Oliveira L., Serra G., GÜRGEN S., Novais R., Alves de Sousa R., Fernandes F. Archives of Civil and Mechanical Engineering , cilt.24, sa.2, 2024 (SCI-Expanded, Scopus)
Estimating the Strength and Deformation Properties of the End Milling Process Using Numerical Analysis Methods GÖRGÜLÜ Y. F., AYDIN M. SAKARYA UNIVERSITY JOURNAL OF SCIENCE , cilt.27, sa.3, ss.580-586, 2023 (Scopus, TRDizin)
Computational Fluid Dynamics and Thermal Analysis of an Unloaded Lumber-drying Kiln GÖRGÜLÜ Y. F., AYDIN M. KASTAMONU UNIVERSITY JOURNAL OF FORESTRY FACULTY , cilt.23, sa.1, ss.64-74, 2023 (ESCI, TRDizin)
Micro-milling Operation of UHMWPE Composites with PTFE and Aramid Reinforcements Sheikhi M. R., GÜRGEN S. APPLIED COMPOSITE MATERIALS , cilt.30, sa.1, ss.57-72, 2023 (SCI-Expanded, Scopus)
Evaluation Of Foreign Object Damage On The Fan Blades with Microscopic Techniques Kırca A. İ., DİLTEMİZ S. F., Yumrukaya S., Batar A. Düzce Üniversitesi Bilim ve Teknoloji Dergisi , cilt.11, 2023 (TRDizin)
An experimental study on the ballistic performance of ultra-high hardness armor steel (Armox 600T) against 7.62 mm × 51 M61 AP projectile in the multi-hit condition Göde E., Teoman A., Çetin B., Tonbul K., Davut K., KUŞHAN M. C. Engineering Science and Technology, an International Journal , cilt.38, 2023 (SCI-Expanded, Scopus)
Intelligent Polymers for Multi-Functional Applications: Mechanical and Electrical Aspects Sheikhi M. R., Guergen S. POLYMERS , cilt.15, sa.12, 2023 (SCI-Expanded, Scopus)
Inspection of Surface Damage in Composite Materials with Different Techniques DİLTEMİZ S. F., Eroğlu E., Batar A., Yumrukaya S. Düzce Üniversitesi Bilim ve Teknoloji Dergisi , cilt.11, 2023 (TRDizin)
Evaluating the efficiency of renewable energy technologies through thermodynamic analyzes GÖRGÜLÜ Y. F. PiscoMed Publishing Pte. Ltd. , cilt.6, sa.1, ss.1-15, 2023 (Hakemli Dergi)
Anti-impact and vibration-damping design of cork-based sandwich structures for low-speed aerial vehicles Sheikhi M. R., GÜRGEN S., Altuntas O., SOFUOĞLU M. A. ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING , cilt.23, sa.2, 2023 (SCI-Expanded, Scopus)
Design of smart sandwich structures enhanced by multi-functional shear thickening fluids (M-STFs): Anti-vibration and electrical conductivity Sheikhi M. R., Guergen S., Li J., SOFUOĞLU M. A., Hasanzadeh M., Kushan M. C., et al. COMPOSITE STRUCTURES , cilt.324, 2023 (SCI-Expanded, Scopus)
Failure analysis of an axle shaft in an airport ground support vehicle Diler A. A., Gürgen S., Sert A. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS , cilt.237, sa.4, ss.925-940, 2023 (SCI-Expanded, Scopus)
Ceramic Faced Stand-Alone Hybrid Armor Design for Civilian (Hidden Armored) Vehicles Teoman A., GÖDE E., Tonbul K., ŞEKER H. İ., kushan m. Savunma Bilimleri Dergisi , cilt.2, sa.43, ss.473-492, 2023 (TRDizin)
Yeşil Havaalanları Demirkaya G., Kuşhan M. C. Makina , cilt.31, sa.178, ss.15-18, 2023 (Hakemsiz Dergi)
The role of conductive fillers on the rheological behavior and electrical conductivity of multi-functional shear thickening fluids (M-STFs) Sheikhi M. R., Hasanzadeh M., GÜRGEN S. ADVANCED POWDER TECHNOLOGY , cilt.34, sa.8, 2023 (SCI-Expanded, Scopus)
Raylı Sistem Araçlarında Kullanılan Kompozit Malzemelerin Termografik Muayene ile Kontrolü DİLTEMİZ S. F., EROĞLU E. Demiryolu Mühendisliği , sa.17, ss.186-198, 2023 (TRDizin)
Havacılık Kompozit Malzemelerinde Mikroskobik Teknikler Kullanılarak Yapısal Sağlık İzleme Uygulamaları DİLTEMİZ S. F., Mustafaoğlu S., KAYA F. Düzce Üniversitesi Bilim ve Teknoloji Dergisi , cilt.11, 2023 (TRDizin)
Optimization of micromachining operation for particle reinforced UHMWPE composites GÜRGEN S., SOFUOĞLU M. A. ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING , cilt.22, 2022 (SCI-Expanded, Scopus)
Anti-impact design of multi-layer composites enhanced by shear thickening fluid Sheikhi M. R., GÜRGEN S. COMPOSITE STRUCTURES , cilt.279, 2022 (SCI-Expanded, Scopus)
Investigation of electromechanical impedance and residual stress relation for samples machined by hot ultrasonic-assisted turning SOFUOĞLU M. A., HAYDARLAR G., Kuşhan M. C., ORAK S., TEKKALMAZ M. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE , cilt.236, sa.8, ss.4180-4193, 2022 (SCI-Expanded, Scopus)
Unexpected Method of High-Viscosity Shear Thickening Fluids Based on Polypropylene Glycols Development via Thermal Treatment Tryznowski M., Golofit T., GÜRGEN S., Krecisz P., Chmielewski M. MATERIALS , cilt.15, sa.17, 2022 (SCI-Expanded, Scopus)
Dizel Lokomotif Ağır Hizmet Motorunda Kullanılan Egzoz Supap Bagası Hasarları ÖZDEMİR Y., DİLTEMİZ S. F., Kandemir G. Demiryolu Mühendisliği , cilt.0, ss.75-83, 2022 (TRDizin)
Energy-Absorbing and Eco-Friendly Perspectives for Cork and WKSF Based Composites under Drop-Weight Impact Machine Sheikhi M. R., Gürgen S., Altuntaş Ö. Machines , cilt.10, sa.11, ss.1-13, 2022 (SCI-Expanded)
The Influence of UV Radiation Aging on Degradation of Shear Thickening Fluids Zurowski R., Tryznowski M., GÜRGEN S., Szafran M., Swiderska A. MATERIALS , cilt.15, sa.9, 2022 (SCI-Expanded, Scopus)
Improvement of spall liner performance with smart fluid applications Guergen S., KUŞHAN M. C. THIN-WALLED STRUCTURES , cilt.180, 2022 (SCI-Expanded, Scopus)
A State-of-the-Art Review on Hemming: A Materials Processing Technology for Mechanical Joints GÜRGEN S., Pruncu C. APPLIED MECHANICS REVIEWS , cilt.74, sa.2, 2022 (SCI-Expanded, Scopus)
Analysing fluid-structure interaction with CFD and FEA on a marine double-wall LNG piping system Cambaz A., GÖRGÜLÜ Y. F., ARAT H. POMORSTVO (RIJEKA) , cilt.36, sa.1, ss.51-60, 2022 (ESCI, Scopus)
Development of a low-cost wire arc additive manufacturing system Navarro M., Matar A., DİLTEMİZ S. F., Eshraghi M. Journal of Manufacturing and Materials Processing , cilt.6, sa.1, 2022 (ESCI, Scopus)
Deceleration behavior of multi-layer cork composites intercalated with a non-Newtonian material Sheikhi M. R., GÜRGEN S. ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING , cilt.23, sa.1, 2022 (SCI-Expanded, Scopus)
Wear behavior of UHMWPE composites under oxidative effect GÜRGEN S. POLYMER DEGRADATION AND STABILITY , cilt.199, 2022 (SCI-Expanded, Scopus)
Designing and producing a bird-inspired unmanned sailplane Keskin G., Durmus S., KARAKAYA M., KUŞHAN M. C. Aircraft Engineering and Aerospace Technology , cilt.93, ss.1052-1059, 2021 (SCI-Expanded, Scopus)
An investigation on wear behavior of UHMWPE/carbide composites at elevated temperatures Gürgen S., Sert A., Kuşhan M. C. Journal of Applied Polymer Science , cilt.138, sa.16, 2021 (SCI-Expanded, Scopus)
Two-Phase Numerical Modelling of a Wet Exhaust System in a Catamaran Motor Yacht Diesel Engine Cambaz A., GÖRGÜLÜ Y. F., ARAT H. Avrupa Bilim ve Teknoloji Dergisi , sa.31, ss.165-170, 2021 (TRDizin)
Electricity Generation Using Wind Formation in Delhi Metro GÖRGÜLÜ Y. F., GÖRGÜLÜ A. SSRG International Journal of Mechanical Engineering , cilt.8, sa.2, ss.8-11, 2021 (Hakemli Dergi)
Hot ultrasonic assisted machining modelling of Ti6Al4V in terms of power consumption SOFUOĞLU M. A., KUŞHAN M. C., ORAK S. Journal of Advances in Manufacturing Engineering , cilt.2, ss.33-41, 2021 (TRDizin)
Failure analysis of aircraft main landing gear cylinder support DİLTEMİZ S. F. Engineering Failure Analysis , cilt.129, 2021 (SCI-Expanded, Scopus)
Generating Electrical Energy from Tyne and Wear Metro GÖRGÜLÜ Y. F., GÖRGÜLÜ A. SSRG International Journal of Mechanical Engineering , cilt.8, sa.3, ss.1-4, 2021 (Hakemli Dergi)
Micro-machining of UHMWPE composites reinforced with carbide fillers Gürgen S., Sofuoğlu M. A. ARCHIVES OF CIVIL AND MECHANICAL ENGINEERING , cilt.21, sa.4, 2021 (SCI-Expanded, Scopus)
Development of Eco-friendly Shock-absorbing Cork Composites Enhanced by a Non-Newtonian Fluid GÜRGEN S., Fernandes F. A. O., de Sousa R. J. A., KUŞHAN M. C. APPLIED COMPOSITE MATERIALS , cilt.28, sa.1, ss.165-179, 2021 (SCI-Expanded, Scopus)
Ultrasonic Inspection for Microstructural and Mechanical Properties of Ductile Cast Iron Özdemir Ö., Gürgen S., Kuşhan M. C. Advanced Engineering Forum , cilt.39, ss.9-19, 2021 (Hakemli Dergi)
CFD analysis of a NACA 0009 aerofoil at a low reynolds number GÖRGÜLÜ Y. F., ÖZGÜR M. A., KÖSE R. JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.24, sa.3, ss.1237-1242, 2021 (ESCI, TRDizin)
An electromechanical in situ viscosity measurement technique for shear thickening fluids HAYDARLAR G., SOFUOĞLU M. A., GÜRGEN S., KUŞHAN M. C., TEKKALMAZ M. ADVANCED ENGINEERING FORUM , 2021 (Hakemli Dergi)
Finite element analysis of different material models for polyurethane elastomer using estimation data sets Sheikhi M. R., Shamsadinlo B., ÜNVER Ö., GÜRGEN S. JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.43, sa.12, 2021 (SCI-Expanded, Scopus)
DESIGN OF A PESTICIDE SPRAYING QUADCOPTER Ünal B., SAVAŞ T., YAZAR I. International Journal of Aviation Science and Technology , 2021 (Hakemli Dergi)
Uzay Çöplüğü Sayın E. Makina Bülten , sa.165, ss.10-11, 2021 (Hakemsiz Dergi)
Design of a 1.2 kW Interleaved Synchronous Buck Converter for Retrofit Applications in Aviation Systems Sener E., Yazar I., Ertasgin G., Yamik H. SAE INTERNATIONAL JOURNAL OF AEROSPACE , cilt.13, sa.2, ss.197-211, 2020 (ESCI, Scopus)
Single Turboshaft Engine Failure Analysis of an Inner Bus Tie Architecture for Turboelectric Distributed Propulsion System Sener E., YAZAR I., Ertasgin G. SAE INTERNATIONAL JOURNAL OF AEROSPACE , cilt.13, sa.2, ss.155-170, 2020 (ESCI, Scopus)
Wind Turbine Applications in Doha Metro, Qatar GÖRGÜLÜ Y. F., ÖZGÜR M. A., KÖSE R. SSRG International Journal of Mechanical Engineering (IJME) , cilt.7, sa.2, ss.21-25, 2020 (Hakemli Dergi)
Baseline architecture design for a turboelectric distributed propulsion system using single turboshaft engine operational scenario Sener E., YAZAR I., Ertasgin G., Yamik H. International Journal of Turbo and Jet Engines , ss.1-11, 2020 (SCI-Expanded, Scopus)
AIR VEHICLES & AVIATION ENGINES KUŞHAN M. C., GÜRGEN S., DİLTEMİZ S. F., KAYA E. Nisan Kitabevi, Eskişehir, 2025
Cork-Based Materials in Engineering Gürgen S. (Editör) Springer Nature, Alabama, 2024
Smart Systems with Shear Thickening Fluid Gürgen S. (Editör) Springer Nature, Alabama, 2024
Modern Manufacturing Processes for Aircraft Materials Gürgen S. (Editör), Pruncu C. I. (Editör) Elsevier Science, Oxford/Amsterdam , New Mexico, 2024
Advances in Turbomachinery Kuşhan M. C. (Editör), Yazar I. (Editör) IntechOpen, London, 2023
Shear Thickening Fluid: Case Studies in Engineering Gürgen S. (Editör) Springer Nature, Alabama, 2023
Shear Thickening Fluids in Protective Applications Gürgen S. (Editör) Springer Nature, Alabama, 2023
Advances in Turbo machinery Yazar I. (Editör) INTECH OPEN , London, 2023
Shear Thickening Fluid: Theory and Applications Gürgen S. (Editör) Springer Nature, Alabama, 2023
Materials, Structures and Manufacturing for Aircraft Gürgen S. (Editör), Kuşhan M. C. (Editör), Sofuoğlu M. A. (Editör) Springer Nature, Zürich, 2022
Aircraft Health Monitoring Systems (AHMS) Applications in Aviation KUŞHAN M. C., DİLTEMİZ S. F. Aircraft Manufacturing Safety and Control, KUŞHAN MELİH CEMAL, DİLTEMİZ SEYİD FEHMİ, Editör, IntechOpen, ss.73-90, 2025
CFD Modeling of Battery Cooling Systems for Electric Vehicles: Enhancing Thermal Management Efficiency GÖRGÜLÜ Y. F., KUNT M. A. International Research and Evaluations in the Field of Engineering, ÖZALP COŞKUN, BARDAK SELAHATTİN, Editör, Serüven Yayınevi, Ankara, ss.245-260, 2024
Shear Thickening Fluid-Based Vibration Damping Applications Diltemiz S. F., Kuşhan M. C., Gürgen S., Yay Ö. Smart Systems with Shear Thickening Fluid, Selim Gürgen, Editör, Springer, London/Berlin , Zürich, ss.59-69, 2024
Shear Thickening Fluid-Based Vibration Damping Applications YAY Ö., DİLTEMİZ S. F., KUŞHAN M. C., GÜRGEN S. Shear Thickening Fluid-Based Vibration Damping Applications, GÜRGEN SELİM, Editör, Springer, Zürich, ss.20-29, 2024
Shear Thickening Fluid-Based Vibration Damping Applications YAY Ö., DİLTEMİZ S. F., KUŞHAN M. C., GÜRGEN S. Smart Systems with Shear Thickening Fluid, GÜRGEN SELİM, Editör, Springer, ss.59-69, 2024
İçten Yanmalı Motorlarda Termik Verimi Artırmaya Yönelik Bir Alternatif: Termal Bariyer Kaplama KUNT M. A., GÖRGÜLÜ Y. F. Mühendislik Alanında Uluslararası Araştırma ve Değerlendirmeler, ÖZALP COŞKUN, BARDAK SELAHATTİN, Editör, Serüven Yayınevi, Ankara, ss.71-80, 2024
Electron beam welding applications in aeroengines SERT A., Sheikhi M. R., GÜRGEN S., KUŞHAN M. C. Modern Manufacturing Processes for Aircraft Materials, GÜRGEN SELİM, Pruncu Catalin, Editör, Elsevier, Amsterdam, ss.333-348, 2024
Thermal Insulation with Cork-Based Materials YAY Ö., Mehdi H., DİLTEMİZ S. F., KUŞHAN M. C., GÜRGEN S. Green Energy and Technology, GÜRGEN SELİM, Editör, Springer, Zürich, ss.20-28, 2024
Development of Shear Thickening Fluid Based Polishing Slurries Sert A., Gürgen S., Kuşhan M. C. Shear Thickening Fluid Case Studies in Engineering, Selim Gürgen, Editör, Springer Nature, Alabama, ss.1-11, 2023
Renewable Energy Resources and Mitigating the Energy Crisis GÖRGÜLÜ Y. F. International Academic Research and Reviews in Engineering, Coşkun Özalp, Selahattin Bardak, Ertaç Hürdoğan, Editör, Serüven Yayınevi, Ankara, ss.19-30, 2023
Future Sustainable Energy in Automotive: Fuel Cells GÖRGÜLÜ Y. F. International Research and Reviews in Engineering, Selahattin Bardak, Editör, Serüven Yayınevi, Ankara, ss.123-134, 2023
Hibrit, Cam Elyaf Takviyeli Polimer Çubuk (GFRP) ve Çelik Donatıların Performanslarının Karşılaştırmalı İncelenmesi Demir M., Daz B., AFACAN K. B., ŞİMŞEK C., KUŞHAN M. C. İnşaat Mühendisliğinde Yenilikçi Yaklaşımlar ve İnşaat Teknolojileri, Doç. Dr. Atila KUMBASAROĞLU, Editör, Bidge Yayınları, ss.60-75, 2023
Shear thickening fluid in spall-liner applications Sheikhi M. R., Gürgen S., Kuşhan M. C. Advances in Healthcare and Protective Textiles, Shahid ul-Islam,Abhijit Majumdar,Bhupendra Butola, Editör, Elsevier Science, Oxford/Amsterdam , Massachusetts, ss.487-508, 2023
Aeronautical/space applications of cork composites Ragimov Y., Sofuoğlu M. A., Gürgen S., Kuşhan M. C. Cork in aerospace: Cultivation to application, SELİM GÜRGEN,MEHMET ALPER SOFUOĞLU,MELİH CEMAL KUŞHAN, Editör, ESOGU Press, Eskişehir, ss.166-191, 2023
CURRENT STATE OF THE ART OF MODELLING AND SIMULATION OF PROPULSION SYSTEMS FOR HYBRID ELECTRIC AIRCRAFT YAZAR I., VEPA R., ÇALIŞKAN F. Progress in Sustainable Aviation, Karakoc, T. Hikmet, Colpan, Can Ozgur, Dalkiran, Alper, Editör, SPRINGER, ss.37-64, 2022
Green Applications with an Advanced Manufacturing Method: Cold Spray Deposition Technology KILIÇAY K., DAYI S. C., KAYA E., GÜRGEN S. Advanced Manufacturing Methods Smart Processes and Modeling for Optimization, Catalin I. Pruncu, Jamal Zbitou, Editör, CRC Press, Boca Raton, ss.27-56, 2022
Aluminum-Lithium Alloys in Aircraft Structures Kaya E., Sheikhi M. R., Gürgen S., Kuşhan M. C. Materials, Structures & Manufacturing for Aircraft, KUŞHAN MELİH CEMAL, GÜRGEN SELİM, SOFUOĞLU MEHMET ALPER, Editör, Springer Nature Switzerland Ag, Zürich, ss.1-25, 2022
Enerji Krizi ve Yenilenemez Enerji Kaynakları GÖRGÜLÜ Y. F. TEKNOBİLİM-2022: Enerji Krizi ve Yenilenebilir Enerji, Ceren KARAMAN, Editör, EFE AKADEMİ YAYINLARI, İstanbul, ss.7-18, 2022
Aluminum-Lithium Alloys in Aircraft Structures Kaya E., Sheıkhı M. R., Gürgen S., Kuşhan M. C. Materials, Structures & Manufacturing for Aircraft, Melih Cemal Kuşhan,Selim Gürgen,Mehmet Alper Sofuoğlu, Editör, Springer Nature, Zürich, ss.1-25, 2022
Green Applications with an Advanced Manufacturing Method: Cold Spray Deposition Technology Kılıçay K., Dayı S. C., Kaya E., Gürgen S. Advanced Manufacturing Methods: Smart Processes and Modeling for Optimization, Catalin Pruncu,Jamal Zbitou, Editör, CRC, New York , New York, ss.28-56, 2022
Wear behavior of UHMWPE: A case study of gas spring Gürgen S., Sert A., Kuşhan M. C. Tribology and Surface Engineering for Industrial Applications, Catalin Pruncu,Amit Aherwar, Editör, CRC, New York , New York, ss.1-34, 2021
Numerical Analysis of Combustion and Emission Characteristics of Pure Fuel Oil GÖRGÜLÜ Y. F., EKİCİ S., KARAKOÇ T. H. ULIBTK’25 Uluslararası Katılımlı 25. Isı Bilimi ve Tekniği Kongresi, Adana, Türkiye, 10 - 12 Eylül 2025, (Tam Metin Bildiri)
Performance Evaluation of a Micro Turbojet Engine Combustion Chamber Using Hydrogen-Ammonia Fuel Mixtures Durmaz F., GÖRGÜLÜ Y. F., EKİCİ S., KARAKOÇ T. H. ULIBTK’25 Uluslararası Katılımlı 25. Isı Bilimi ve Tekniği Kongresi, Adana, Türkiye, 10 - 12 Eylül 2025, (Tam Metin Bildiri)
Performance Analysis of Nano-Aluminum Doped Jet Fuels on the Turbojet Engine Cycle GÜNALTILI E., GÖRGÜLÜ Y. F., EKİCİ S., KARAKOÇ T. H. International Symposium on Energy Management and Sustainability, İstanbul, Türkiye, 27 - 29 Ağustos 2025, (Tam Metin Bildiri)
Design and Optimization Challenges of Fuel Cell–Gas Turbine Hybrid Power Systems for Aviation Applications GÜNALTILI E., GÖRGÜLÜ Y. F., EKİCİ S., YILMAZOĞLU M. Z., KARAKOÇ T. H. International Conference on Polygeneration 2025, Antalya, Türkiye, 9 - 11 Ekim 2025, ss.174-181, (Tam Metin Bildiri)
CFD-Based Thermal and Emission Analysis of a 2D Hydrogen-Fueled Combustor Using Real Engine Data at Cruise Altitude GÖRGÜLÜ Y. F., EKİCİ S., KARAKOÇ T. H. 9th International Hydrogen Technologies Congress, İzmir, Türkiye, 25 - 28 Mayıs 2025, (Tam Metin Bildiri)
Thermal and Combustion Characteristics of Nano Aluminum Enhanced Kerosene GÖRGÜLÜ Y. F., GÜNALTILI E., EKİCİ S., KARAKOÇ T. H. International Symposium on Energy Management and Sustainability, İstanbul, Türkiye, 27 - 29 Ağustos 2025, (Tam Metin Bildiri)
Combustion and Emission Behavior of a Hybrid Ammonia-Jet-A Blend Under Real Jet Engine Operating Conditions GÖRGÜLÜ Y. F., EKİCİ S., KARAKOÇ T. H. 9th International Hydrogen Technologies Congress, İzmir, Türkiye, 25 - 28 Mayıs 2025, (Tam Metin Bildiri)
Multiphase CFD Assessment of Dry and Wet Marine Exhaust Systems with Thermal Pressure and Turbulence Benchmarks GÖRGÜLÜ Y. F., EKİCİ S., SÖĞÜT M. Z., KARAKOÇ T. H. International Conference on Polygeneration 2025, Antalya, Türkiye, 9 - 11 Ekim 2025, ss.249-254, (Tam Metin Bildiri)
Termal Şok Test Düzeneği Kurulumu ÖZDEMİR Y., DİLTEMİZ S. F., Sakarya Z. IX. INTERNATIONAL HEALTH, ENGINEERING AND SCIENCES CONGRESS, 27 - 29 Eylül 2024, ss.170-176, (Tam Metin Bildiri)
Model Uçak Aerodinamik Analizinde Düşük Mertebeli Aerodinamik Çözücülerin Karşılaştırılması Akçan M., Öznalbant Z., Timuralp Ç. 10. Ulusal Havacılık ve Uzay Konferansı, Ankara, Türkiye, 18 - 20 Eylül 2024, sa.57, ss.1-25, (Tam Metin Bildiri)
CFD Analysis of Parallel Flow in Double Pipe Heat Exchangers: Evaluating Thermal Performance and Effectiveness GÖRGÜLÜ Y. F. 15th China to Adriatic Turkish World International Scientific Research Congress, Baku, Azerbaycan, 7 - 09 Ocak 2024, cilt.1, ss.53-61, (Tam Metin Bildiri)
A study on battery management systems in the application of aviation engines Sarana G., Yetik Ö., Karakoç T. H. ISUDEF24, Baku, Azerbaycan, 22 - 24 Mayıs 2024, ss.1-12, (Tam Metin Bildiri)
SAVTEK 2024 11. Savunma Teknolojileri Kongresi Daysal M., Teoman A., Göde E., Tonbul K., Öğünç İ., Kuşhan M. C. SAVTEK 2024 11. Savunma Teknolojileri Kongresi, Ankara, Türkiye, 10 - 12 Eylül 2024, cilt.1, sa.1, ss.1-5, (Tam Metin Bildiri)
A study on the contributions of phase change material in battery cooling processes in thermal management Akpınar C., Yetik Ö., Karakoç T. H. ISUDEF24, Baku, Azerbaycan, 22 - 24 Mayıs 2024, ss.1-12, (Tam Metin Bildiri)
Experimental Thermal Analysis of Cylindrical LFP Batteries Demir F. N., Abdurakhmonzoda K., Yetik Ö., Karakoç T. H. ISSA24, Belgrade, Sırbistan, 30 Ekim - 01 Kasım 2024, ss.1-12, (Tam Metin Bildiri)
İÇTEN YANMALI DOĞALGAZ MOTORU PİSTONUNA TERMAL BARİYER KAPLAMA UYGULANMASI DİLTEMİZ S. F., ÖZDEMİR Y. ISARC 6. INTERNATIONAL DICLE SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, Diyarbakır, Türkiye, 25 - 26 Mayıs 2024, (Özet Bildiri)
TERMAL ŞOK TEST DÜZENEĞİ KURULUMU ÖZDEMİR Y., DİLTEMİZ S. F. IX. INTERNATIONAL HEALTH, ENGINEERING AND SCIENCES CONGRESS, Ankara, Türkiye, 27 - 29 Eylül 2024, (Tam Metin Bildiri)
BİR UÇAK BRAKETİNİN TOPOLOJİ OPTİMİZASYONU VE GELENEKSEL METOTLARLA ÜRETİLEBİLİR ŞEKİLDE YENİDEN MODELLENMESİ Diltemiz S. F., Gönenç S. 3. BİLSEL INTERNATIONAL TRUVA SCIENTIFIC RESEARCHES AND INNOVATION CONGRESS, Çanakkale, Türkiye, 25 - 26 Mayıs 2024, ss.684, (Özet Bildiri)
İÇTEN YANMALI DOĞALGAZ MOTORU PİSTONUNA TERMAL BARİYER KAPLAMA UYGULAMASI Sakarya Z., DİLTEMİZ S. F., ÖZDEMİR Y. ISARC 6. INTERNATIONAL DICLE SCIENTIFIC RESEARCH AND INNOVATION CONGRESS, Diyarbakır, Türkiye, 25 Mayıs 2024, ss.567-568, (Özet Bildiri)
THE EFFECT OF LAZER CUTTING AND MIG WELDING PARAMETERS ON CONNECTION PROPERTIES IN ALUMINUM ALLOYS Diltemiz S. F., Çakır G. 4. BİLSEL INTERNATIONAL WORLD SCIENCE AND RESEARCH CONGRESS, İstanbul, Türkiye, 22 - 23 Haziran 2024, ss.574, (Özet Bildiri)
Shell and Tube Heat Exchanger Optimization for Enhanced Swimming Pool Heating Efficiency Using CFD Analysis GÖRGÜLÜ Y. F. 5. BİLSEL INTERNATIONAL WORLD SCIENTIFIC AND RESEARCH CONGRESS, İstanbul, Türkiye, 5 - 06 Ekim 2024, ss.414-425, (Tam Metin Bildiri)
Thermal Behavior and Performance Analysis of Lfp Batteries Under Different Current Rates Demir F. N., Yalçın H., Abdurakhmonzoda K., Yetik Ö., Karakoç T. H. ISATECH24, Thanh-Pho-Ho-Chi-Minh, Vietnam, 27 - 29 Ağustos 2024, ss.1-12, (Tam Metin Bildiri)
COMPOSITE MATERIALS USED IN ARJ21 AIRCRAFT Kuşhan M. C. INTERNATIONAL SCIENTIFIC RESEARCH AND INNOVATION CONGRESS -II, Adana, Türkiye, 16 - 18 Aralık 2024, cilt.1, sa.1, ss.2385-2389, (Tam Metin Bildiri)
TÜRKİYE’DE UÇAK/HAVACILIK/UZAY MÜHENDİSLİĞİ EĞİTİMİ YEĞİNER Y., URLA T., Demirkaya G., ÖZNALBANT Z., DİLTEMİZ S. F., GÜRGEN S., et al. XII.Ulusal Uçak, Havacılık ve Uzay Kurultayı, Türkiye, 13 Ekim 2023, (Tam Metin Bildiri)
Quality Assurance & Standards in Space Projects Aydes S., ÖZNALBANT Z. 10th International Conference on Recent Advances in Air and Space Technologies, RAST 2023, İstanbul, Türkiye, 7 - 09 Haziran 2023, (Tam Metin Bildiri)
Composite Materials for Space Radiation Shielding: A Review PEKER M. Y., ÇETİN M. E. International Symposium on Aircraft Technology, MRO & Operations (ISATECH 2023), Ha-Noi, Vietnam, 24 - 26 Ağustos 2023, (Tam Metin Bildiri)
VARESTRAINT WELDABILITY TEST FOR HIGH TECHNOLOGY WELDING OPERATIONS Çevik S., Kuşhan M. C. 10th INTERNATIONAL CONGRESS ON ENGINEERING AND TECHNOLOGY MANAGEMENT, İstanbul, Türkiye, 14 - 15 Ekim 2023, cilt.1, sa.1, ss.414-421, (Tam Metin Bildiri)
Investigation of Earth's Bow Shock Characteristic Using Data Retrieved from THEMIS C Spacecraft Peker M. Y., Çetin M. E. 2023 10th International Conference on Recent Advances in Air and Space Technologies (RAST), İstanbul, Türkiye, 7 - 09 Haziran 2023, (Tam Metin Bildiri)
Yeşil Havaalanlarının Toplum Sağlığı Üzerindeki Etkileri PEKER M. Y., DEMİRKAYA G., KUŞHAN M. C. Havacılık ve Uzay Tıbbı Kongresi (HUTP 2023), Eskişehir, Türkiye, 19 - 22 Ekim 2023, (Tam Metin Bildiri)
BAKIMDA NESNELERİN İNTERNETİ VE UÇAK BAKIMDA SANAL GERÇEKLİK/ARTIRILMIŞ GERÇEKLİK UYGULAMALARI DEĞERLİ M. C., ŞAHİN Ö., YAZAR I., KUŞHAN M. C. 10. Uluslararası Katılımlı Bakım teknolojileri Kongresi ve Sergisi, Denizli, Türkiye, 20 - 22 Ekim 2022, (Tam Metin Bildiri)
Recent developments and future trends in micro-milling tools and coatings SOFUOĞLU M. A., GÜRGEN S. IV. International Turkic World Congress on Science and Engineering, Niğde, Türkiye, 23 - 24 Haziran 2022, (Tam Metin Bildiri)
UÇAK MOTOR BAKIMINDA YAĞ SİSTEM ELEMANLARINDAKİ HASARLARIN ERKEN TESPİTİ AMACIYLA KULLANILAN MANYETİK ÇİP DEDEKTÖRLER Diltemiz S. F., Altun Ö. INTERNATIONAL MAINTENANCE TECHNOLOGIES CONGRESS AND EXHIBITION, Denizli, Türkiye, 20 - 22 Ekim 2022, ss.351-358, (Tam Metin Bildiri)
Evaluation of Architectural Structures in Electric Taxiing Systems CÖMERT O., YAZAR I., KARAKOÇ T. H. International Symposium on Aircraft technology, MRO and Operations - ISATECH 2022, Belgrade, Sırbistan, 14 - 16 Eylül 2022, (Tam Metin Bildiri)
GENİŞLETİLMİŞ GERÇEKLİK ve HAVACILIKTA UYGULAMA ALANLARI YAZAR I. Savunma Sanayi Sempozyumu ve Sergisi 2022, Kayseri, Türkiye, 13 - 15 Ekim 2022, (Tam Metin Bildiri)
HAVA ARAÇLARINDA KULLANILAN KOMPOZİT YAPILARINDA YAPISAL SAĞLIK İZLEME EROĞLU E., DİLTEMİZ S. F., KUŞHAN M. C. Savunma Sanayii Sempozyumu ve Sergisi’22, Türkiye, 20 Ekim 2022, (Tam Metin Bildiri)
UÇUŞ TEST ENSTRÜMANTASYONU VE UYGULAMALARI MENEVŞE A. İ., YAZAR I. ULUSAL HAVACILIK ve UZAY KONFERANSI - UHUK 2022, İzmir, Türkiye, 14 - 16 Eylül 2022, (Tam Metin Bildiri)
Radar Absorption Capabilities of Polyurethane Sandwich Composite Foams Kuşhan M. C. V. International Ege Composite Materials Symposium - KompEge, Antalya, Türkiye, 4 - 06 Kasım 2021, cilt.1, sa.1, ss.10-15, (Tam Metin Bildiri)
EXAMINATION OF SUPERCAPACITORS IN TERMS OF SUSTAINABILITY IN AVIATION Görgülü S. C., YAZAR I., KARAKOÇ T. H. International Symposium on Unmanned Systems and Defense Industry 2021, ISUDEF 2021, 26 - 28 Ekim 2021, (Tam Metin Bildiri)
IMPORTANCE OF COMMUNICATION IN AUTOMOTIVE Bozkurt Y. E., Daz B., Unç S. C., Kuşhan M. C. 6nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’21), Cappadocia /TURKEY, Kayseri, Türkiye, 26 - 28 Kasım 2021, cilt.1, sa.1, ss.20-25, (Tam Metin Bildiri)
Analysis of Analytical Solution Approaches of InverseSimulation for Fixed Wing Aircraft ÖZNALBANT Z., Chakravarthy A., DOĞAN A. AIAA SciTech 2021, 11 - 21 Ocak 2021, (Tam Metin Bildiri)
COMPARISON OF ENERGY STORAGE COMPONENTS IN AVIATION Görgülü S. C., YAZAR I., KARAKOÇ T. H. International Symposium Aircraft Technology, MRO and Operations-ISATECH 2021, Macaristan, 28 - 30 Haziran 2021, (Tam Metin Bildiri)
Yeni polimer matris kompozitlerin işlenebilirliğinin incelenmesi GÜRGEN S., YAMAN C., KAYA M., DÖNMEZ D., ÜLGEN B., SOFUOĞLU M. A. 6. Uluslararası Mühendislik ve Teknoloji Yönetimi Kongresi, Türkiye, 20 Kasım 2021, (Tam Metin Bildiri)
Anti impact properties of smart cork composites GÜRGEN S., SOFUOĞLU M. A. 7. Uluslararası Mühendislik Mimarlık ve Tasarım Kongresi, Türkiye, 21 - 22 Mayıs 2021, (Tam Metin Bildiri)
Analysis of solution approaches for inverse simulation of fixed wing aircraft ÖZNALBANT Z., Chakravarthy A., Dogan A. AIAA Science and Technology Forum and Exposition, AIAA SciTech Forum 2021, Virtual, Online, 11 - 15 Ocak 2021, ss.1-12, (Tam Metin Bildiri)
Implementation of a Single-Phase Half-Bridge Grid-Connected PV Inverter ŞENER E., ERTAŞGIN G., YAZAR I. 5th International Symposium on Multidisciplinary Studies and Innovative Technologies- ISMSIT2021, 20 - 22 Ekim 2021, (Tam Metin Bildiri)
Investigating Production of Polyurethane Elastomer Materials Using Shape Deposition Manufacturing Method Sheikhi M. R., Gürgen S., Kuşhan M. C. 8. INTERNATIONAL FIBER AND POLYMER RESEARCH SYMPOSIUM,, Eskişehir, Türkiye, 18 - 19 Haziran 2021, cilt.1, sa.1, ss.24-27, (Tam Metin Bildiri)
Uçak Kompozit Yapılarında Termografik Analiz ile Tahribatsız Muayene Eroğlu E., Diltemiz S. F., Kuşhan M. C., Gürgen S. Uçak Kompozit Yapılarında Termografik Analiz ile Tahribatsız Muayene, Eskişehir, Türkiye, 18 - 19 Haziran 2021, cilt.1, sa.1, ss.20-25, (Tam Metin Bildiri)
Thermal Analysis of a Marine LNG Tank Cambaz A., GÖRGÜLÜ Y. F., ARAT H. Mediterranean Summit 6th International Applied Sciences Congress, Adana, Türkiye, 23 - 24 Ekim 2021, ss.26-34, (Tam Metin Bildiri)
COMPOSITE LIGHTWEIGHT ARMOR DESIGN ATLERNATIVES FOR HELICOPTERS Kuşhan M. C., Çetin B., Tonbul K., Teoman A., Göde E. V. International Ege Composite Materials Symposium, Antalya, Türkiye, 4 - 06 Kasım 2021, cilt.1, sa.1, ss.25-29, (Tam Metin Bildiri)
EFFECT OF UHMWPE COATING ON THE TRIBOLOGICAL BEHAVIOR OF A LASER TEXTURED STEEL SERT A., GÜRGEN S. 6th International Conference on Advances in Mechanical Engineering, İstanbul, Türkiye, 20 Ekim 2021, ss.1338-1341, (Tam Metin Bildiri)
Mikro frezelemede son gelişmeler ve gelecekteki eğilimler GÜRGEN S., SOFUOĞLU M. A. 7. Uluslararası Mühendislik Mimarlık ve Tasarım Kongresi, Türkiye, 21 - 22 Mayıs 2021, (Tam Metin Bildiri)
ARAMID fabrics used as ballistic plate for army KUŞHAN M. C., GÜRGEN S., SOFUOĞLU M. A. 8th International Fiber and Polymer Research Symposium, Türkiye, 18 - 19 Haziran 2021, (Tam Metin Bildiri)
270VDC-28VDC Synchronous Interleaved 1.2kW Buck Converter Design for Avionics ŞENER E., YAZAR I., ERTAŞGIN G., YAMIK H. ISATECH 2019, 9 - 11 Ekim 2019, (Tam Metin Bildiri)
1.2kW Interleaved Synchronous Buck Converter Design for Aviation Systems ŞENER E., YAZAR I., ERTAŞGIN G., YAMIK H. ISATECH 2019, 9 - 11 Ekim 2019, (Tam Metin Bildiri)
Comparative Analysis of a NACA 0012 Aerofoil Performed in a Subsonic Wind Tunnel and CFD GÖRGÜLÜ Y. F., ÖZGÜR M. A., KÖSE R. 2. Uluslararası Uygulamalı Bilimler Kongresi, Edirne, Türkiye, 10 Mayıs 2020, ss.100-105, (Tam Metin Bildiri)
CONCEPTUAL DESIGN AND INTEGRATION OF LARGE LITHIUM BASED BATTERY PACKS FOR ELECTRIC VEHICLES Vepa R., YAZAR I., ÇALIŞKAN F. INTERNATIONAL SYMPOSIUM ON SUSTAINABLE AVIATION (ISSA) 2020, 9-12 NOVEMBER 2020 UNIVERSITI PUTRA MALAYSIA, MALAYSIA, Malezya, 09 Kasım 2020, (Tam Metin Bildiri)
Vertical Wind Turbine Application in Doha Metro, Qatar GÖRGÜLÜ Y. F., ÖZGÜR M. A., KÖSE R., YOLCAN O. O. 3. International GAP Conference on Mathematics-Engineering-Science and Medical Studies, Şanlıurfa, Türkiye, 29 Kasım - 01 Aralık 2019, cilt.1, ss.1010-1018, (Tam Metin Bildiri)
Horizontal Wind Turbine Application in Doha Metro, Qatar GÖRGÜLÜ Y. F., ÖZGÜR M. A., KÖSE R. International Symposium on Current Developments in Science, Technology and Social Sciences, Ankara, Türkiye, 20 - 22 Aralık 2019, cilt.2, ss.210-218, (Tam Metin Bildiri)
Electrical architecture design for a turbo electric aircraft propulsion system on Matlab / Simulink ŞENER E., ERTAŞGIN G., YAZAR I. ISSA 2019, Budapest, Macaristan, 26 - 29 Mayıs 2019, (Tam Metin Bildiri)
Generating Electrical Energy by Using Air Flow Occurrence on Horizontal Wind Turbines in Underground Metros A Case Study in London GÖRGÜLÜ Y. F., Winfield P., KÖSE R., ÖZGÜR M. A., GÖRGÜLÜ A., YOLCAN O. O., et al. 8th International Advanced Technologies Symposium, Elazığ, Türkiye, 19 - 22 Ekim 2017, cilt.6, ss.1258-1266, (Tam Metin Bildiri)
Generating Electrical Energy by Using Air Flow Occurrence on Vertical Wind Turbines in Underground Metros A Case Study in London GÖRGÜLÜ Y. F., Winfield P., KÖSE R., GÖRGÜLÜ A., ÖZGÜR M. A., YOLCAN O. O. 2nd International Energy Engineering Conference, Gaziantep, Türkiye, 12 - 13 Ekim 2017, cilt.1, ss.296-309, (Tam Metin Bildiri)
3 drone 3 görev Urla T. Diğer, ss.15-17, 2021
Bilirkişi Raporu Kuşhan M. C., Ay G. M., Kaya E. Eskişehir Tüketici Mahkemesi, ss.3, Eskişehir, 2022