| AVESİS

Yayın Türü

Yayın Alt Türü

(WOS) Araştırma Alanları

SDG

Araştırmacılar

Yıl


SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler
Synthesis of MoS₂/Graphene Hetero-Film Photocatalyst and Li-Oxygen Battery Application Çelt A. C., Çayırlı Can M., Özden R. C., Lökçü E., Anık M. CHEMELECTROCHEM , ss.1-6, 2025 (SCI-Expanded)
Improved bacterial filtration and DNA retention by a novel microfiltration process including composite membranes Javanifar R., GHORBANPOOR H., AVCI H. SEPARATION AND PURIFICATION TECHNOLOGY , cilt.357, 2025 (SCI-Expanded)
A novel green Microfiltration approach by developing a Lab-on-a-Chip System: A case study for Escherichia coli Javanifar R., Dabagh S., Kaya M., Bütün Şengel S., Ebrahimi A., Ghorbanpoor H., et al. Separation and Purification Technology , cilt.353, 2025 (SCI-Expanded)
Mitigating Zinc Dendrite Formation and Parasitic Side Reactions in Aqueous Zn-Ion Batteries Via Laser-Assisted Carbonization of Cu-PANI Films on Zn Anodes Asadi Haris S., Adhami S., Abuoali M., COŞKUN Ş., YÜKSEL R. Small , cilt.21, sa.3, 2025 (SCI-Expanded)
Investigating the Structural and Lithium Storage Properties of High-Entropy Oxides in the Mg-Co-Ni-Cu-Zn-O System LÖKÇÜ E., ANIK M. Scripta Materialia , cilt.240, 2024 (SCI-Expanded)
Electrosprayed MnFe2O4/PVDF membrane integrated microfluidic chip for amoxicillin removal with real-time monitoring of pH and dissolved oxygen Dabagh S., Javanifar R., Kaya M., Ebrahimi A., Guven S., Kaya B. M., et al. JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING , cilt.12, sa.6, 2024 (SCI-Expanded)
Molecular Separation by Using Active and Passive Microfluidic chip Designs: A Comprehensive Review (Adv. Mater. Interfaces 2/2024) Ebrahimi A., Icoz K., Didarian R., Shih C., Tarim E. A., Nasseri B., et al. ADVANCED MATERIALS INTERFACES , cilt.11, sa.2, ss.1, 2024 (SCI-Expanded)
Development of thermoelectric Ca3Co4O9 crystals for thermo-photovoltaic hybrid energy conversion Coşkun N., Uz V., GAŞAN H., Sen F. International Journal of Environmental Science and Technology , 2024 (SCI-Expanded)
An experimental study of the friction stir welding of Al 5083 H321 plates by using different process parameters Aybar K., Çakir F. H. Canadian Metallurgical Quarterly , cilt.63, sa.2, ss.360-372, 2024 (SCI-Expanded)
Molecular Separation by Using Active and Passive Microfluidic chip Designs: A Comprehensive Review Ebrahimi A., İÇÖZ K., Didarian R., Shih C., Tarim E. A., Nasseri B., et al. Advanced Materials Interfaces , cilt.11, sa.2, 2024 (SCI-Expanded)
Post-treatment optimization for silver nanowire networks in transparent droplet-based TENG sensors Cakir O., DOĞANAY D., Cugunlular M., Cicek M. O., DEMİRCİOĞLU O., COŞKUN Ş., et al. Nano Energy , cilt.128, 2024 (SCI-Expanded)
Earth-Abundant Divalent Cation High-Entropy Spinel Ferrites as Bifunctional Electrocatalysts for Oxygen Evolution and Reduction Reactions ERDİL T., ÖZGÜR Ç., Geyikci U., LÖKÇÜ E., TOPARLI Ç. ACS APPLIED ENERGY MATERIALS , cilt.7, ss.7775-7786, 2024 (SCI-Expanded)
CRYOGENIC TREATMENT EFFECT ON THE WEAR RESISTANCE OFAM60 MAGNESIUM ALLOY Gassama B., Karahisar B., ÖZTÜRK KÖRPE N., ÖTEYAKA M. Ö. ARCHIVES OF METALLURGY AND MATERIALS , cilt.69, sa.4, ss.1555-1564, 2024 (SCI-Expanded)
B-Site Doping Boosts the OER and ORR Performance of Double Perovskite Oxide as Air Cathode for Zinc-Air Batteries Özgür Ç., Erdil T., Geyikçi U., Yildiz I., Lökçü E., Toparli Ç. CHEMPHYSCHEM , cilt.25, sa.22, ss.202400531, 2024 (SCI-Expanded)
Engineering Oxygen Vacancies in (FeCrCoMnZn)3O4-δ High Entropy Spinel Oxides Through Altering Fabrication Atmosphere for High-Performance Rechargeable Zinc-Air Batteries ÖZGÜR Ç., ERDİL T., Geyikci U., Okuyucu C., LÖKÇÜ E., KALAY Y. E., et al. Global Challenges , cilt.8, sa.1, 2024 (SCI-Expanded)
Synthesis of N-Doped Graphene Photo-Catalyst for Photo-Assisted Charging of Li-Ion Oxygen Battery Kaçar N., LÖKÇÜ E., ÇAYIRLI M., ÖZDEN R. C., COŞKUN Ş., TOPARLI Ç., et al. Global Challenges , cilt.8, sa.1, 2024 (SCI-Expanded)
Improving the Bioactivity and Antibiofilm Properties of Metallic Implant Materials via Controlled Surface Microdeformation BİÇER F., TOKER S. M., Soykan M. N., Yilmaz B. T., YENİCE GÜRSU B., UYSAL O. ACS OMEGA , cilt.9, sa.42, ss.43138-43155, 2024 (SCI-Expanded)
Effect of Non-Plastic Raw Materials Particle Size on Technological Properties of the Single-Fired Wall Tile Bodies TANIŞAN B., Sakarya G. K. Transactions of the Indian Ceramic Society , cilt.83, sa.1, ss.22-28, 2024 (SCI-Expanded)
A Comprehensive Electrochemical Investigation of AuNPs-Modified Screen-Printed Carbon Electrodes for Domoic Acid Detection and Its Effect on Endothelial Cells Koc Y., AVCI H. CHEMISTRYSELECT , cilt.9, sa.37, 2024 (SCI-Expanded)
Coating effects of a strain sensor on durability and sensitivity using the fiber loop ringdown spectroscopy technique KAYA B. M., ESENTÜRK O., AŞICI C., Sarac U., DINDIŞ G., BAYKUL M. C. PHYSICA SCRIPTA , cilt.99, sa.5, 2024 (SCI-Expanded)
Utilization of porcelain tile polished waste as an alternative raw material in wall tile bodies TANIŞAN B., Guven D. N. JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY , 2024 (SCI-Expanded)
Advances in xenogeneic donor decellularized organs: A review on studies with sheep and porcine-derived heart valves Inal M. S., AVCI H., Hassan S., DARCAN C., Shin S. R., AKPEK A. Bioengineering and Translational Medicine , cilt.9, sa.6, 2024 (SCI-Expanded)
Ultrasound-assisted synthesis of rGO/SiO2-based nanosheets and their electrochemical performances in Li-ion batteries Lökçü E., CAN S., Anik M. Turkish Journal of Chemistry , cilt.47, sa.2, ss.495-503, 2023 (SCI-Expanded)
Simple and low-cost antibiotic susceptibility testing for Mycobacterium tuberculosis using screen-printed electrodes GHORBANPOOR H., AKÇAKOCA İ., Norouz Dizaji A., Butterworth A., Corrigan D., Kocagoz T., et al. Biotechnology and Applied Biochemistry , cilt.70, sa.3, ss.1397-1406, 2023 (SCI-Expanded)
Effects of surface micro-deformation on the cellular response to metallic implant materials BİÇER F., TOKER S. M. MATERIALS TODAY COMMUNICATIONS , cilt.37, 2023 (SCI-Expanded)
Effects of Zr addition on electrochemical characteristics of MgTiMnNi hydrogen storage alloys Küçükdeveci N., AKAY ERDOĞAN I., BİNAL AYBAR A. International Journal of Hydrogen Energy , cilt.48, sa.49, ss.18753-18760, 2023 (SCI-Expanded)
A multifunctional sateen woven dressings for treatment of skin injuries Ozel C., Apaydin E., EKER SARIBOYACI A., Tamayol A., AVCI H. Colloids and Surfaces B: Biointerfaces , cilt.224, 2023 (SCI-Expanded)
On chip microfluidic separation of cyclotides Didarian R., EBRAHIMI A., GHORBANPOOR H., Bagheroghli H., GÜZEL F. D., faradpour m., et al. Turkish Journal of Chemistry , cilt.47, sa.1, ss.253-262, 2023 (SCI-Expanded)
Revealing the single-channel characteristics of OprD (OccAB1) porins from hospital strains of Acinetobacter baumannii Ebrahimi A., Ergün T., KAYGUSUZ İZGÖRDÜ Ö., DARCAN C., AVCI H., Öztürk B., et al. European Biophysics Journal , cilt.52, sa.3, ss.131-143, 2023 (SCI-Expanded)
Electrolyte pH dependence of composition, roughness parameters, particle diameter and magnetic features of nanostructured Fe-Co-Ni/ITO deposits prepared by electrochemical deposition method SARAÇ U., Trong D. N., BAYKUL M. C., Long V. C., Dang P. N., Lan D. P., et al. JOURNAL OF MICROSCOPY , cilt.290, sa.2, ss.106-116, 2023 (SCI-Expanded)
Photocatalytic Efficiency of g-C<sub>3</sub>N<sub>4</sub>/Graphene Nanocomposites in the Photo-Assisted Charging of the Li-Ion Oxygen Battery Kaçar N., Çayirli M., Özden R. C., Lökçü E., Anik M. ACS OMEGA , cilt.8, sa.48, ss.46227-46235, 2023 (SCI-Expanded)
Effects of boron waste as a reinforcement in the production of Al composite foams Kilic G., ÖZTÜRK KÖRPE N. MATERIALS TESTING , cilt.65, sa.3, ss.322-331, 2023 (SCI-Expanded)
Nickel ion release and surface analyses on instrument fragments fractured beyond the apex: a laboratory investigation TOKER S. M., ORHAN E. O., BEKLEN A. BMC ORAL HEALTH , cilt.23, sa.1, 2023 (SCI-Expanded)
CLINICAL-GRADE HUMAN SYNOVIAL FLUID-DERIVED MESENCHYMAL STEM CELLS FOR DEGENERATIVE MENISCUS THERAPY Uysal O., Avcı H., Bagis S. G., Semerci Sevimli T., Ozel C., Cevizlidere B., et al. CYTOTHERAPY , sa.6, 2023 (SCI-Expanded)
Improvement of some physical and magnetic properties of nanocrystalline Fe15-Ni85/ITO thin films by galvanostatic pretreatment process Saraç U., Baykul M. C., Dındış G., Trong D. N., Kaya B. M., Lan D. P., et al. MATERIALS TODAY COMMUNICATIONS , cilt.35, 2023 (SCI-Expanded)
High-throughput microfluidic chip with silica gel‐C18 channels for cyclotide separation Ebrahimi A., Didarian R., GHORBANPOOR H., DOĞAN GÜZEL F., Hashempour H., AVCI H. Analytical and Bioanalytical Chemistry , cilt.415, sa.27, ss.6873-6883, 2023 (SCI-Expanded)
A fully integrated rapid on-chip antibiotic susceptibility test-A case study for Mycobacterium smegmatis Ghorbanpoor H., Dizaji A. N., Akçakoca İ., Blair E. O., Ozturk Y., Hoskisson P., et al. SENSORS AND ACTUATORS A-PHYSICAL , cilt.339, 2022 (SCI-Expanded)
Facile Synthesis and Origin of Enhanced Electrochemical Oxygen Evolution Reaction Performance of 2H-Hexagonal Ba2CoMnO6-delta as a New Member in Double Perovskite Oxides Erdil T., LÖKÇÜ E., YILDIZ İ., OKUYUCU C., KALAY Y. E., TOPARLI Ç. ACS OMEGA , cilt.7, sa.48, ss.44147-44155, 2022 (SCI-Expanded)
Electrochemical hydrogen storage properties of mechanically alloyed Mg0.8Ti0.2-xMnxNi (x 1/4 0, 0.025, 0.05, 0.1) type alloys Küçükdeveci N., AKAY ERDOĞAN I., BİNAL AYBAR A., ANIK M. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.47, sa.4, ss.2511-2519, 2022 (SCI-Expanded)
Lubricity assessment of ultra-low sulfur diesel fuel (ULSD), biodiesel, and their blends, in conjunction with pure hydrocarbons and biodiesel based compounds Tat M. E., Çelik O. N., Er Ü., Gaşan H., Ulutan M. International Journal of Engine Research , cilt.23, sa.2, ss.214-231, 2022 (SCI-Expanded)
Tuning structural properties, morphology and magnetic characteristics of nanostructured Ni-Co-Fe/ITO ternary alloys by galvanostatic pretreatment process SARAÇ U., Dung Nguyen Trong D. N. T., BAYKUL M. C., Van Cao Long V. C. L., Talu S. MICROSCOPY RESEARCH AND TECHNIQUE , cilt.85, sa.12, ss.3945-3954, 2022 (SCI-Expanded)
Photoassisted Charging of Li-Ion Oxygen Batteries Using g-C3N4/rGO Nanocomposite Photocatalysts LÖKÇÜ E., Kaçar N., ÇAYIRLI M., ÖZDEN R. C., ANIK M. ACS APPLIED MATERIALS & INTERFACES , cilt.14, sa.30, ss.34583-34592, 2022 (SCI-Expanded)
Electrochemical Deposition of Fe–Co–Ni Samples with Different Co Contents and Characterization of Their Microstructural and Magnetic Properties Long V. C., Saraç U., BAYKUL M. C., Trong L. D., Ţălu Ş., Trong D. N. Coatings , cilt.12, sa.3, 2022 (SCI-Expanded)
An Investigation of the Properties of 3D Textile-Reinforced Cementitious Composite Exposed to High Temperature CANBAZ M., AYBAR K., Çelikten S. Iranian Journal of Science and Technology - Transactions of Civil Engineering , cilt.46, sa.6, ss.4371-4382, 2022 (SCI-Expanded)
Immunomodulating Hydrogels as Stealth Platform for Drug Delivery Applications Rezaei Z., Yilmaz-Aykut D., Tourk F. M., Bassous N., Barroso-Zuppa M., Shawl A. I., et al. Pharmaceutics , cilt.14, sa.10, 2022 (SCI-Expanded)
Effect of synthesis environment on the electrochemical properties of (FeMnCrCoZn)(3)O-4 high-entropy oxides for Li-ion batteries Bayraktar D. O., Lökçü E., Özgür Ç., Erdil T., Toparli Ç. INTERNATIONAL JOURNAL OF ENERGY RESEARCH , cilt.46, sa.15, ss.22124-22133, 2022 (SCI-Expanded)
An electrochemical biosensor with integrated microheater to improve the sensitivity of electrochemical nucleic acid biosensors AKÇAKOCA İ., GHORBANPOOR H., Blair E., Ozturk Y., Dizaji A. N., Kocagoz T., et al. JOURNAL OF MICROMECHANICS AND MICROENGINEERING , cilt.32, sa.4, 2022 (SCI-Expanded)
From corrosion behavior to radiation response: A comprehensive biocompatibility assessment of a CoCrMo medium entropy alloy for utility in orthopedic and dental implants Gurel S., Nazarahari A., Canadinc D., Gerstein G., Maier H., Cabuk H., et al. INTERMETALLICS , cilt.149, 2022 (SCI-Expanded)
Developing an in-Line method to improve mechanical and flame retardancy performance of polyethylene fiber Gunaydin B., Seyhan A., Polat Y., Kilic A., Demir A., Ureyen M. E., et al. JOURNAL OF INDUSTRIAL TEXTILES , cilt.52, sa.1, ss.1-15, 2022 (SCI-Expanded)
Copper reinforced SiAlON matrix composites produced by spark plasma sintering Acikbas G., Calis Acikbas N., YAMAN ISLAK B., Ayas E., Bayrak K. G., Ataman A. Ceramics International , cilt.48, ss.13260-13270, 2022 (SCI-Expanded)
Effect of rGO loading on the electrochemical performance of Li22Si5/rGO composite anodes for lithium-ion batteries Çelikbilek Z., CAN S., LÖKÇÜ E., ANIK M. International Journal of Energy Research , cilt.46, sa.2, ss.1137-1145, 2022 (SCI-Expanded)
Improvement of polyethylene fiber wettability and mechanical properties through an environmentally sustainable spinning process Seyhan A., Gunaydin B. N., Polat Y., Kılıç A., Demir A., AVCI H. International Journal of Adhesion and Adhesives , cilt.119, 2022 (SCI-Expanded)
On‐chip label‐free impedance‐based detection of antibiotic permeation Kaur J., Ghorbanpoor H., Öztürk Y., Kaygusuz Ö., Avcı H., Darcan C., et al. IET Nanobiotechnology , cilt.15, sa.1, ss.100-106, 2021 (SCI-Expanded)
Determination of therapeutic agents efficiencies of microsatellite instability high colon cancer cells in post-metastatic liver biochip modeling Bayir Garbioglu D., DEMİR N., Ozel C., AVCI H., DİNCER M. FASEB Journal , cilt.35, sa.9, 2021 (SCI-Expanded)
Advances in protective layer-coating on metal nanowires with enhanced stability and their applications Bang J., COŞKUN Ş., Pyun K. R., DOĞANAY D., Tunca S., KOYLAN S., et al. Applied Materials Today , cilt.22, 2021 (SCI-Expanded)
Effects of Composition on the Physical Properties of Water-Soluble Salt Cores Cantas C., Baksan B. INTERNATIONAL JOURNAL OF METALCASTING , cilt.15, sa.3, ss.839-851, 2021 (SCI-Expanded)
EFFECTS OF COMPACTING PRESSURE AND SINTERING TEMPERATURE ON THE PROPERTIES OF HIGHLY POROUS PURE ALUMINUM PRODUCED WITH BORIC ACID (H3BO3) Korpe N., Dürger N. B., Dur D., ÇELİKYÜREK İ. POWDER METALLURGY AND METAL CERAMICS , cilt.59, sa.11-12, ss.661-671, 2021 (SCI-Expanded)
V-ZrSiO4 ceramic pigments synthesis from m-ZrO2 and different amorphous silica sources TANIŞAN B. Journal of the Australian Ceramic Society , cilt.57, sa.5, ss.1351-1357, 2021 (SCI-Expanded)
The effect of boric acid content on the properties of electrochemically prepared Ni-Fe/ITO thin films Sarac U., Kaya B. M., Baykul M. C. DIGEST JOURNAL OF NANOMATERIALS AND BIOSTRUCTURES , sa.3, ss.1137-1145, 2021 (SCI-Expanded)
Synthesis and properties of TiB2/Ti3SiC2 composites Islak B., Candar D. CERAMICS INTERNATIONAL , cilt.47, sa.1, ss.1439-1446, 2021 (SCI-Expanded)
Tissue adhesives: From research to clinical translation Bal-Ozturk A., Cecen B., Avci-Adali M., Topkaya S. N., ALARÇİN E., YAŞAYAN G., et al. Nano Today , cilt.36, 2021 (SCI-Expanded)
The influence of seed layer electroplating time on structural properties, optical energy bandgap, diameter, growth orientation and surface roughness of ZnO nanorods Saraç U., BAYKUL M. C. Journal of Materials Science: Materials in Electronics , cilt.32, ss.26578-26587, 2021 (SCI-Expanded)
Label-free molecular detection of antibiotic susceptibility forMycobacterium smegmatisusing a low cost electrode format Guzel F. D., Ghorbanpoor H., Dizaji A. N., Akçakoca İ., Ozturk Y., Kocagoz T., et al. BIOTECHNOLOGY AND APPLIED BIOCHEMISTRY , cilt.68, sa.6, ss.1159-1166, 2021 (SCI-Expanded)
Investigation of electrochemical behavior of potassium ferricyanide/ferrocyanide redox probes on screen printed carbon electrode through cyclic voltammetry and electrochemical impedance spectroscopy Koç Y., Moralı U., Erol S., Avcı H. Turkish Journal Of Chemistry , cilt.45, sa.6, ss.1895-1915, 2021 (SCI-Expanded)
Bulk Nanostructured Metal from Multiply-Twinned Nanowires Prestowitz L. C. O., COŞKUN Ş., Hu X., Dunand D. C., Huang J. Nano Letters , cilt.21, ss.5627-5632, 2021 (SCI-Expanded)
Investigation of the Effect of Channel Structure and Flow Rate on On-Chip Bacterial Lysis Dizaji A. N., Ozturk Y., Ghorbanpoor H., Cetak A., AKÇAKOCA İ., Kocagoz T., et al. IEEE Transactions on Nanobioscience , cilt.20, sa.1, ss.86-91, 2021 (SCI-Expanded)
Effect of Infill Ratio on the Tensile and Flexural Properties of Unreinforced and Carbon Fiber-Reinforced Polylactic Acid Manufactured by Fused Deposition Modeling ÖTEYAKA M. Ö., AYBAR K., Öteyaka H. C. Journal of Materials Engineering and Performance , cilt.30, ss.5203-5215, 2021 (SCI-Expanded)
Studying structural, magnetic and morphological features of electrochemically fabricated thin films of Co–Ni–Fe with different Fe compositions Saraç U., BAYKUL M. C. Thin Solid Films , cilt.736, 2021 (SCI-Expanded)
Electrochemical-based ‘‘antibiotsensor’’ for the whole-cell detection of the vancomycin-susceptible bacteria Norouz Dizaji A., Ali Z., Ghorbanpoor H., Ozturk Y., Akçakoca İ., Avcı H., et al. Talanta , cilt.234, 2021 (SCI-Expanded)
THE ROLE OF DEPOSITION TEMPERATURE ON PARTICLE SIZE, ROUGHNESS PARAMETERS, MAGNETIC AND STRUCTURAL FEATURES OF ELECTROCHEMICALLY GROWN Ni-Fe/ITO SAMPLES Saraç U., Kaya M., Baykul M. C. DIGEST JOURNAL OF NANOMATERIALS AND BIOSTRUCTURES , cilt.16, sa.1, ss.51-60, 2021 (SCI-Expanded)
Fabric based wearable triboelectric nanogenerators for human machine interface DOĞANAY D., ÇİÇEK M. Ö., DURUKAN M. B., Altuntas B., Agbahca E., COŞKUN Ş., et al. Nano Energy , cilt.89, 2021 (SCI-Expanded)
Current strategies for the regeneration of skeletal muscle tissue Alarçin E., Bal‐Öztürk A., Avcı H., Ghorbanpoor H., Guzel F. D., Akpek A., et al. International Journal of Molecular Sciences , cilt.22, sa.11, 2021 (SCI-Expanded)
Synthesis and electrochemical performance of lithium silicide based alloy anodes for Li–ion oxygen batteries LÖKÇÜ E., ANIK M. International Journal of Hydrogen Energy , cilt.46, ss.10624-10631, 2021 (SCI-Expanded)
Electrochemical Investigation of Gold Based Screen Printed Electrodes: An Application for a Seafood Toxin Detection Koc Y., Morali U., Erol S., Avcı H. Electroanalysis , cilt.33, sa.4, ss.1033-1048, 2021 (SCI-Expanded)
Effects of Al on the Phase Volume Fractions and Wear Properties in the AlxCoCrFeMoNi High Entropy Alloy System Gaşan H., Lökçü E., Ozcan A., Çelik O. N., Çelikyürek İ., Ulutan M., et al. METALS AND MATERIALS INTERNATIONAL , cilt.26, sa.3, ss.310-320, 2020 (SCI-Expanded)
Bath temperature-dependent structural properties, coercive force, surface morphology and surface texture of electrochemically grown nanostructured Ni-Co/ITO thin films SARAÇ U., KAYA M., BAYKUL M. C. APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING , cilt.126, sa.3, 2020 (SCI-Expanded)
Controlling the surface morphologies, structural and magnetic properties of electrochemically fabricated Ni-Co thin film samples via seed layer deposition Denizli C., SARAÇ U., BAYKUL M. C. JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS , cilt.31, sa.5, ss.4279-4286, 2020 (SCI-Expanded)
Decellularized inner body membranes for tissue engineering: a review Inci I., Norouz Dizaji A., Ozel C., MORALI U., Dogan Guzel F., Avci H. JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION , cilt.31, sa.10, ss.1287-1368, 2020 (SCI-Expanded)
Recent Advances in 4D Bioprinting AKPEK A., BAL ÖZTÜRK A., ALARÇİN E., AVCI H., avci adali m. Research Journal of Biomedical and Biotechnology , cilt.1, sa.1, ss.20-23, 2020 (SCI-Expanded)
Flexible poly(styrene-ethylene-butadiene-styrene) hybrid nanofibers for bioengineering and water filtration applications Avcı H., Akkulak E., Gergeroglu H., Ghorbanpoor H., Uysal O., Eker Sarıboyacı A., et al. Journal of Applied Polymer Science , cilt.137, sa.26, 2020 (SCI-Expanded)
Self-assembled fibrillar polyethylene crystals with tunable properties Seyhan A., Gunaydin B. N., POLAT Y., Kılıç A., Demir A., AVCI H. POLYMER ENGINEERING AND SCIENCE , cilt.60, sa.9, ss.2176-2189, 2020 (SCI-Expanded)
Electrochemical Performance of (MgCoNiZn)(1-x)LixO High-Entropy Oxides in Lithium-Ion Batteries LÖKÇÜ E., Toparli C., ANIK M. ACS APPLIED MATERIALS & INTERFACES , cilt.12, sa.21, ss.23860-23866, 2020 (SCI-Expanded)
Synthesis of La2MgNi9 hydrogen storage alloy in molten salt Durger N. B., ANIK M. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.45, sa.15, ss.8750-8756, 2020 (SCI-Expanded)
Compressive properties and energy absorption response of cBN added Al composite foams YAMAN ISLAK B., Onuklu E. INTERNATIONAL JOURNAL OF MATERIALS RESEARCH , cilt.111, sa.2, ss.119-128, 2020 (SCI-Expanded)
New Eutectic High-Entropy Alloys Based on Co-Cr-Fe-Mo-Ni-Al: Design, Characterization and Mechanical Properties GAŞAN H., Ozcan A. METALS AND MATERIALS INTERNATIONAL , cilt.26, sa.8, ss.1152-1167, 2020 (SCI-Expanded)
Enhancement of the mechanical properties of EN52CrMoV4 spring steel by deep cryogenic treatmentVerbesserung der mechanischen Eigenschaften von EN52CrMoV4 Federstahl durch Tieftemperaturbehandlung ÖZDEN R. C., Anik M. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK , cilt.51, sa.4, ss.422-431, 2020 (SCI-Expanded)
A Point-of-Use (POU) Water Disinfection: Silver Nanowire Decorated Glass Fiber Filters Bahcelioglu E., DOĞANAY D., COŞKUN Ş., ÜNALAN H. E., BAYRAMOĞLU T. H. JOURNAL OF WATER PROCESS ENGINEERING , cilt.38, 2020 (SCI-Expanded)
All-Solution-Processed, Oxidation-Resistant Copper Nanowire Networks for Optoelectronic Applications with Year-Long Stability Genlik S. P., Tigan D., Kocak Y., Ercan K. E., ÇİÇEK M. Ö., Tunca S., et al. ACS APPLIED MATERIALS & INTERFACES , cilt.12, sa.40, ss.45136-45144, 2020 (SCI-Expanded)
Flexible nanofiber based triboelectric nanogenerators with high power conversion YAR A., Karabiber A., Ozen A., ÖZEL F., COŞKUN Ş. RENEWABLE ENERGY , cilt.162, ss.1428-1437, 2020 (SCI-Expanded)
Silver-nanowire-modified fabrics for wide-spectrum antimicrobial applications Doganay Y., Kanicioglu A., COŞKUN Ş., Akca G., ÜNALAN H. E. JOURNAL OF MATERIALS RESEARCH , cilt.34, sa.4, ss.500-509, 2019 (SCI-Expanded)
Evaluation of properties of spark plasma sintered Ti3SiC2 and Ti3SiC2/SiC composites YAMAN ISLAK B., Ayas E. CERAMICS INTERNATIONAL , cilt.45, sa.9, ss.12297-12306, 2019 (SCI-Expanded)
Formation of TaB2 powders from high energy ball milling and borothermal reduction process Gurcan K., Ayas E., GAŞAN H. MATERIALS CHEMISTRY AND PHYSICS , cilt.235, 2019 (SCI-Expanded)
Corrosion and Wear Characteristics of Electroless Ni-P, Ni-P-W and Composite Ni-P-W/Al2O3 Coatings on AZ91 Sheet Tasci S., ÖZDEN R. C., ANIK M. METALS AND MATERIALS INTERNATIONAL , cilt.25, sa.2, ss.313-323, 2019 (SCI-Expanded)
Microstructures and mechanical properties of graphene platelets-reinforced spark plasma sintered tantalum diboride-silicon carbide composites Gurcan K., Inci E., Sackan I., Ayas E., GAŞAN H. MATERIALS RESEARCH EXPRESS , cilt.6, sa.11, 2019 (SCI-Expanded)
Synergistic effects of plant extracts and polymers on structural and antibacterial properties for wound healing AVCI H., Gergeroglu H. POLYMER BULLETIN , cilt.76, sa.7, ss.3709-3731, 2019 (SCI-Expanded)
A Comparative Study on Microstructures, Magnetic Features and Morphologies of Ternary Fe-Co-Ni Alloy Thin Films Electrochemically Fabricated at Different Deposition Potentials SARAÇ U., KAYA M., BAYKUL M. C. JOURNAL OF SUPERCONDUCTIVITY AND NOVEL MAGNETISM , cilt.32, sa.4, ss.917-923, 2019 (SCI-Expanded)
Effect of Calcium Hexaborate Pentahydrate as a Lubricant Additive in Commercial Engine Oil Ozcan A., Yilmaz D., Koc N., GAŞAN H. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS , cilt.72, sa.2, ss.327-333, 2019 (SCI-Expanded)
3D printed antibacterial silver nanowire/polylactide nanocomposites Bayraktar I., DOĞANAY D., COŞKUN Ş., KAYNAK C., AKCA G., ÜNALAN H. E. COMPOSITES PART B-ENGINEERING , cilt.172, ss.671-678, 2019 (SCI-Expanded)
Wear response of glass fiber and ceramic tile-reinforced hybrid epoxy matrix composites AÇIKBAŞ G., Yaman B. IRANIAN POLYMER JOURNAL , cilt.28, sa.1, ss.21-29, 2019 (SCI-Expanded)
Dissolution Behavior of Electrodeposited Ni-W Alloys Adiguzel Z., ANIK M. PROTECTION OF METALS AND PHYSICAL CHEMISTRY OF SURFACES , cilt.54, sa.2, ss.316-324, 2018 (SCI-Expanded)
A Review of Cellulose and Cellulose Blends for Preparation of Bio-derived and Conventional Membranes, Nanostructured Thin Films, and Composites Douglass E. F., AVCI H., Boy R., Rojas O. J., Kotek R. POLYMER REVIEWS , cilt.58, sa.1, ss.102-163, 2018 (SCI-Expanded)
Preparation of origanum minutiflorum oil-loaded core–shell structured chitosan nanofibers with tunable properties Avcı H., Ghorbanpoor H., Nurbaş M. Polymer Bulletin , cilt.75, sa.9, ss.4129-4144, 2018 (SCI-Expanded)
Reversible Redox Activity by Ion-pH Dually Modulated Duplex Formation of i-Motif DNA with Complementary G-DNA Chang S., Kilic T., Lee C. K., AVCI H., Bae H., Oskui S. M., et al. NANOMATERIALS , cilt.8, sa.4, 2018 (SCI-Expanded)
Carbothermic reduction synthesis of calcium hexaboride using PVA-calcium hexaborate mixed gels Yilmaz D., SAVACI U., KOÇ N., TURAN S. CERAMICS INTERNATIONAL , cilt.44, sa.3, ss.2976-2981, 2018 (SCI-Expanded)
The Microstructure and Mechanical Properties of Friction Welded Cast Ni3Al Intermetallic Alloy Celikyurek İ., BAKSAN B., TORUN O., Arici G., Ozcan A. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS , cilt.71, sa.3, ss.775-779, 2018 (SCI-Expanded)
Recent advances in organ-on-a-chip technologies and future challenges: a review AVCI H., Dogan Guzel F., EROL S., Akpek A. TURKISH JOURNAL OF CHEMISTRY , cilt.42, sa.3, ss.587-610, 2018 (SCI-Expanded)
Effect of cryogenic treatment on the microstructure and the wear behavior of WC-Co end mills for machining of Ti6Al4V titanium alloy Çelik O. N., Sert A., Gaşan H., Ulutan M. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY , cilt.95, ss.2989-2999, 2018 (SCI-Expanded)
Investigation and recycling of paint sludge with cement and lime for producing lightweight construction mortar Avcı H., Ghorbanpoor H., Topçu İ. B., Nurbaş M. Journal of Environmental Chemical Engineering , cilt.5, sa.1, ss.861-869, 2017 (SCI-Expanded)
A new apparatus for standardization of experimental burn models ARDA M. S., Kocman A. E., Soztutar E., BAKSAN B., ÇETİN C. BURNS , cilt.43, sa.6, ss.1322-1329, 2017 (SCI-Expanded)
Friction and wear behavior of spark plasma-sintered cBN-added Al2O3-PSZ-based composites Yaman B., MANDAL H. JOURNAL OF THE AUSTRALIAN CERAMIC SOCIETY , cilt.53, sa.1, ss.163-172, 2017 (SCI-Expanded)
An eco-friendly approach to synthesis and characterization of magnetite (Fe3O4) nanoparticles using Platanus Orientalis L. leaf extract Nurbas M., Ghorbanpoor H., Avci H. Digest Journal of Nanomaterials and Biostructures , cilt.12, sa.4, ss.993-1000, 2017 (SCI-Expanded)
Effect of process variables on the synthesis of MgB2 by high energy ball mill KURAMA H., Erkus S., GAŞAN H. PHYSICOCHEMICAL PROBLEMS OF MINERAL PROCESSING , cilt.53, sa.2, ss.969-982, 2017 (SCI-Expanded)
Direct synthesis of La-Mg-Ni-Co type hydrogen storage alloys from oxide mixtures BİNAL AYBAR A., ANIK M. JOURNAL OF ENERGY CHEMISTRY , cilt.26, sa.4, ss.719-723, 2017 (SCI-Expanded)
The effect of process control agent usage on the structural properties of MgB2 synthesized by high energy ball mill KURAMA H., Erkus S., GAŞAN H. CERAMICS INTERNATIONAL , cilt.43, 2017 (SCI-Expanded)
Development of High-Tenacity, High-Modulus Poly(ethylene terephthalate) Filaments via a Next Generation Wet-Melt-Spinning Process Yoon J. H., AVCI H., Najafi M., Nasri L., Hudson S. M., Kotek R. POLYMER ENGINEERING AND SCIENCE , cilt.57, sa.2, ss.224-230, 2017 (SCI-Expanded)
Cobalt chromite nano pigments synthesis through microwave-assisted polyol route TANIŞAN B., Dondi M. JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY , cilt.83, sa.3, ss.590-595, 2017 (SCI-Expanded)
An exploration of plastic deformation dependence of cell viability and adhesion in metallic implant materials UZER YILMAZ B., Toker S. M., Cingoz A., Bagci-Onder T., Gerstein G., Maier H. J., et al. JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS , cilt.60, ss.177-186, 2016 (SCI-Expanded)
Dry sliding friction and wear behavior of bronze matrix composites reinforced with Ni3Al particles: Comparison with conventional brake lining ÇELİKYÜREK İ., Bicer A. INTERNATIONAL JOURNAL OF MATERIALS RESEARCH , cilt.107, sa.9, ss.835-841, 2016 (SCI-Expanded)
Molten salt synthesis of La(Ni1-xCox)(5) (x=0, 0.1, 0.2, 0.3) type hydrogen storage alloys ANIK M., Hatirnaz N. B., BİNAL AYBAR A. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.41, sa.1, ss.361-368, 2016 (SCI-Expanded)
Photophysical properties of phosphorescent elastomeric composite nanofibers ÇALIŞIR M. D., Erol M., Kılıç A., AVCI H. DYES AND PIGMENTS , cilt.125, ss.95-99, 2016 (SCI-Expanded)
Synthesis of La2Ni7 hydrogen storage alloy by the electro-deoxidation technique ANIK M., BİNAL AYBAR A., Kucukdeveci N., Erken H., BAKSAN B., GAŞAN H., et al. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.40, sa.5, ss.2248-2254, 2015 (SCI-Expanded)
Controlling of Threadline Dynamics via a Novel Method to Develop Ultra-High Performance Polypropylene Filaments Avci H., Kotek R., Toliver B. POLYMER ENGINEERING AND SCIENCE , cilt.55, sa.2, ss.327-339, 2015 (SCI-Expanded)
High-performance filaments by melt spinning low viscosity nylon 6 using horizontal isothermal bath process Najafi M., AVCI H., Kotek R. POLYMER ENGINEERING AND SCIENCE , cilt.55, sa.11, ss.2457-2464, 2015 (SCI-Expanded)
Synthesis of La-2(Ni1-xCox)(7) (x=0.05, 0.1, 0.2) Hydrogen Storage Alloys by the Electro-Deoxidation Technique ANIK M., BİNAL AYBAR A., Hatirnaz N. B., Ozdemir D. JOURNAL OF THE ELECTROCHEMICAL SOCIETY , cilt.162, sa.6, 2015 (SCI-Expanded)
Wear performance of spark plasma sintered Co/WC and cBN/Co/WC composites Yaman B., MANDAL H. INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS , cilt.42, ss.9-16, 2014 (SCI-Expanded)
Hydrogen storage characteristics of Ti2Ni alloy synthesized by the electro-deoxidation technique ANIK M., BAKSAN B., Orbay T. O., Kucukdeveci N., BİNAL AYBAR A., ÖZDEN R. C., et al. INTERMETALLICS , cilt.46, ss.51-55, 2014 (SCI-Expanded)
Discharging characteristics of CoB nano powders ANIK M., Kucukdeveci N. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.38, sa.3, ss.1501-1509, 2013 (SCI-Expanded)
Charge/discharge characteristics of electroless CoB films ANIK M., Kucukdeveci N., Yilmaz A. THIN SOLID FILMS , cilt.527, ss.69-75, 2013 (SCI-Expanded)
Development of the high performance magnesium based hydrogen storage alloy ANIK M., Karanfil F., Kucukdeveci N. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.37, sa.1, ss.299-308, 2012 (SCI-Expanded)
Synthesis of Fe-Mn Black Pigments by Using Hematite Waste and Manganese Ore Mixtures TANIŞAN B., Turan S. TRANSACTIONS OF THE INDIAN CERAMIC SOCIETY , cilt.71, sa.1, ss.17-20, 2012 (SCI-Expanded)
Black ceramic pigments for porcelain tile bodies produced with chromite ores and iron oxide waste TANIŞAN B., TURAN S. JOURNAL OF CERAMIC PROCESSING RESEARCH , cilt.12, sa.4, ss.462-467, 2011 (SCI-Expanded)
Friction welding of cast Fe-28Al alloy Torun O., Celikyurek İ., BAKSAN B. INTERMETALLICS , cilt.19, sa.7, ss.1076-1079, 2011 (SCI-Expanded)
Microstructure and strength of friction-welded Fe-28Al and 316 L stainless steel Celikyurek İ., Torun O., BAKSAN B. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING , cilt.528, ss.8530-8536, 2011 (SCI-Expanded)
Electrochemical hydrogen storage characteristics of Mg-Pd-Ni ternary alloys ANIK M., Ozdemir G., Kucukdeveci N. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.36, sa.11, ss.6744-6750, 2011 (SCI-Expanded)
Effect of Al, B, Ti and Zr additive elements on the electrochemical hydrogen storage performance of MgNi alloy ANIK M., Ozdemir G., Kucukdeveci N., BAKSAN B. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.36, sa.2, ss.1568-1577, 2011 (SCI-Expanded)
Corrosion characteristics of Alloy AZ63 in buffered neutral solutions ANIK M., Gunesdogdu I. M. MATERIALS & DESIGN , cilt.31, sa.6, ss.3100-3105, 2010 (SCI-Expanded)
Effect of electroless nickel coating on the electrochemical hydrogen storage characteristics of Al and Zr including Mg-based alloys ANIK M., AKAY ERDOĞAN I., Topcu S. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.34, sa.13, ss.5449-5457, 2009 (SCI-Expanded)
Electrochemical hydrogen storage performance of Mg-Ti-Zr-Ni alloys ANIK M., AKAY ERDOĞAN I., Oezdemir G., BAKSAN B. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.34, sa.24, ss.9765-9772, 2009 (SCI-Expanded)
Electrochemical hydrogen storage characteristics of Mg1.5Al0.5-xZrxNi (x=0, 0.1, 0.2, 0.3, 0.4, 0.5) alloys synthesized by mechanical alloying ANIK M., GAŞAN H., Topcu S., AKAY ERDOĞAN I., Aydinbeyli N. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.34, sa.6, ss.2692-2700, 2009 (SCI-Expanded)
Titanium oxidation by pulsed oxygen plasma BALBAĞ M. Z., PAT S., Cenik I., Ekem N., AKAN T., BAKSAN B., et al. Journal of Optoelectronics and Advanced Materials , cilt.10, sa.3, ss.680-682, 2008 (SCI-Expanded)
Titanium oxidation by pulsed oxygen plasma Balbag M. Z., Pat S., Cenik I., Ekem N., AKAN T., BAKSAN B., et al. JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS , cilt.10, sa.3, ss.680-682, 2008 (SCI-Expanded)
Diffusion bonding of AZ91 using a silver interlayer Torun O., Karabulut A., BAKSAN B., Celikyurek İ. MATERIALS & DESIGN , cilt.29, sa.10, ss.2043-2046, 2008 (SCI-Expanded)
Effect of coating bath composition on the properties of electroless nickel-boron films ANIK M., Korpe E., Sen E. SURFACE & COATINGS TECHNOLOGY , cilt.202, sa.9, ss.1718-1727, 2008 (SCI-Expanded)
Effect of the eutectic phase mixture on the anodic behavior of alloy AZ91 Anik M., Avci P., Tanverdi A., Celikyurek İ., BAKSAN B., Gurler R. MATERIALS & DESIGN , cilt.27, sa.5, ss.347-355, 2006 (SCI-Expanded)
Effect of the heating rate on crystallization behavior of mechanically alloyed Mg50Ni50 amorphous alloy Aydinbeyli N., ÇELİK O. N., Gasan H., Aybar K. INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.31, sa.15, ss.2266-2273, 2006 (SCI-Expanded)
Boronizing of iron aluminide Fe72Al28 Celikyurek İ., BAKSAN B., Torun O., Gurler R. INTERMETALLICS , cilt.14, sa.2, ss.136-141, 2006 (SCI-Expanded)
Diffusion bonding of iron aluminide Fe72Al28 using a pure iron interlayer Torun O., Gurler R., BAKSAN B., Celikyurek İ. INTERMETALLICS , cilt.13, sa.8, ss.801-804, 2005 (SCI-Expanded)
Effect of pH on the anodic Behavior of tungsten Anik M., Osseo-Asare K. JOURNAL OF THE ELECTROCHEMICAL SOCIETY , cilt.149, sa.6, 2002 (SCI-Expanded)
Diğer Dergilerde Yayınlanan Makaleler
Size effect on compressive behavior of GFRP bars Eryılmaz Yıldırım M., Aybar K., Canbaz M. Challenge Journal of Structural Mechanics , cilt.10, sa.1, ss.14-20, 2024 (Hakemli Dergi)
Sert Hammadde Tane Boyutu ve Pişirim Sıcaklığının Duvar Karosu Bünye Özelliklerine Etkisi Tanışan B., Karakedi Sakarya G. Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.28, sa.1, ss.12-18, 2024 (Hakemli Dergi)
Determination of waste crushed baked clay aggregate concrete with granular composite material preparations ŞAMDAN F., ÇELİKYÜREK İ., CANBAZ M. Challenge Journal of Concrete Research Letters , cilt.15, sa.4, ss.112-119, 2024 (Scopus)
AB2O4 Spinel Tipi Yüksek-Entropili Oksitlerin Sentezi ve Elektrokimyasal Performansları Lökçü E. Bilecik Şeyh Edebali Üniversitesi Fen Bilimleri Dergisi , cilt.11, sa.1, ss.86-92, 2024 (Hakemli Dergi)
Clinical Perspectives and Novel Preclinical Models of Malignant Pleural Mesothelioma: A Critical Review EBRAHIMI A., AK G., ÖZEL C., İzgördü H., GHORBANPOOR H., Hassan S., et al. ACS Pharmacology and Translational Science , cilt.7, sa.11, ss.3299-3333, 2024 (ESCI)
Effect of H2/Ar Ratio on the Photoanodic Currents of Graphene/MoS2 Films ÖZDEN R. C., ANIK M. The Eurasia Proceedings of Science, Technology, Engineering & Mathematics (EPSTEM) , cilt.26, ss.718-722, 2023 (Scopus)
HAVACILIKTA KULLANILAN BAZI SÜPERALAŞIMLARIN YÜKSEK SICAKLIK GAZ OKSİTLENME DAVRANIŞLARININ KARŞILAŞTIRILMASI Bilgiç H. b., Halıcı U. G., BAYRAK İ., OZTURK KORPE N. Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online) , cilt.31, sa.2, ss.689-697, 2023 (Hakemli Dergi)
A NEW APPROACH TO TENSILE TESTING OF GFRP BARS Aybar K., Eryilmaz Yildirim M., Canbaz M. Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online) , cilt.31, ss.826-833, 2023 (Hakemli Dergi)
Glycine-Assisted Synthesis of High Surface Area (FeMnCrCoZn)3O4 Microsheets ÖZDEN R. C., ANIK M. The Eurasia Proceedings of Science, Technology, Engineering & Mathematics (EPSTEM) , cilt.26, ss.416-419, 2023 (Scopus)
Interaction of Ti-6Al-7Nb alloy with simulated body fluid; a preliminary biocompatibility investigation CULFA Ş., TOKER S. M. Frontiers in Life Sciences and Related Technologies (Online) , cilt.4, sa.3, ss.111-117, 2023 (Hakemli Dergi)
HIGH-TEMPERATURE MECHANICAL BEHAVIOURS OF IRON ALUMINIDES WITH YTTRIUM ADDITION ÖZTÜRK KÖRPE N., ÇELİKYÜREK İ., GÜRLER R. Journal of International Scientific Publications , cilt.17, ss.27-33, 2023 (Hakemli Dergi)
Biomimmetic Coating of 316L Stainless Steel with Microdeformation Areas on The Surface Sarikayak A., Koc E., Kalkan M., Toker S. M. JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.26, ss.1349-1358, 2023 (ESCI)
Improvement of Photo-Catalytic Properties of Graphene by N-Doping ÖZDEN R. C., LÖKÇÜ E., ANIK M. The Eurasia Proceedings of Science Technology Engineering and Mathematics , cilt.21, sa.1, ss.283-287, 2022 (Scopus)
Correlation between Tetragonality and the Residual Stress in Cryotreated Spring Steels ÖZDEN R. C. The Eurasia Proceedings of Science Technology Engineering and Mathematics , cilt.21, sa.1, ss.418-422, 2022 (Scopus)
Improved Energy Efficiency of Lithium-Air Batteries by using Alloy Based Anode and Photocatalyst Loading Cathode LÖKÇÜ E., ANIK M., ÖZDEN R. C. The Eurasia Proceedings of Science Technology Engineering and Mathematics , cilt.21, sa.1, ss.237-240, 2022 (Scopus)
The Smallest Workers in Regenerative Medicine: Stem Cell-Derived Exosomes Öner Ö., Kara S. G., Karakaya İ., Eker Sarıboyacı A., Uysal O., Güneş S., et al. , cilt.3, sa.2, ss.58-67, 2022 (Hakemli Dergi)
Investigation of the Compressive Behaviours of Pure Zinc and Zinc Alloy (ZA27) Foam Materials Produced Using Boric Acid (H3 BO3) Borik Asit (H3BO3) Kullanılarak Üretilen Saf Çinko ve Çinko Alaşımı (ZA27) Köpük Malzemelerin Basma Davranışlarının İncelenmesi ÖZTÜRK KÖRPE N., Kiremitci S. El-Cezeri Journal of Science and Engineering , cilt.9, sa.2, ss.656-668, 2022 (Scopus)
NVESTIGATION OF GOLD NANOPARTICLE MODIFICATION ON SCREEN PRINTED GOLD ELECTRODE BY ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY Koc Y., Avcı H. Journal of Engineering and Architecture Faculty of Eskisehir Osmangazi University , cilt.30, sa.3, ss.389-396, 2022 (Hakemli Dergi)
Synthesis of Nanocomposite Photo-Catalysts for Photo-Assisted Charging of Li-Ion Oxygen Batteries Lökçü E., Özden R. C., Anik M. The Eurasia Proceedings of Science Technology Engineering and Mathematics , cilt.21, sa.1, ss.316-320, 2022 (Scopus)
Electrochemical Performance of Tin-Based Solder Alloys for Secondary Lithium Batteries LÖKÇÜ E., ÖZDEN R. C., ANIK M. The Eurasia Proceedings of Science Technology Engineering and Mathematics , cilt.21, sa.1, ss.214-217, 2022 (Scopus)
Effect of Aluminum Casting Dross Addition on Mechanical Properties and Microstructure in Aluminum Foam Production Alüminyum Köpük Üretiminde Alüminyum Döküm Cürufu İlavesinin Mekanik Özelliklere ve Mikroyapıya Etkisi Uyan P., ÖZTÜRK KÖRPE N. El-Cezeri Journal of Science and Engineering , cilt.9, sa.3, ss.996-1004, 2022 (Scopus)
A comparative study of the effect of polyurethane nanofiber and powders filler on the mechanical properties of carbon fiber and glass fiber composites ÖTEYAKA M. Ö., AYBAR K., ÖTEYAKA H. C. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi , cilt.28, sa.1, ss.51-57, 2022 (ESCI)
Resistance Spot Weld Ability of Mild Steel Coated with Zn, Galfan and ZA12 ÇELİKYÜREK İ., TAŞDEMİR A., BAKSAN B. The Eurasia Proceedings of Science, Technology, Engineering & Mathematics (EPSTEM) , cilt.16, ss.57-62, 2021 (Hakemli Dergi)
A preliminary Investigation of Surface Micro Modification Effects on the Biocompatibility of 316L Stainless Steel Toker S. M., Özbulut E. S., Kolçak Z., Güner E. European Mechanical Science , cilt.5, sa.3, ss.109-115, 2021 (Hakemli Dergi)
Effect of Secondary Aging of Copper-Chromium Alloys to Electrical Conductivity BAKSAN B., ÇELİKYÜREK İ., TAŞDEMİR A. The Eurasia Proceedings of Science, Technology, Engineering & Mathematics (EPSTEM) , cilt.16, ss.63-68, 2021 (Hakemli Dergi)
Mineralleştirici İlavesinin Vanadyum-Zirkon Seramik Pigment Özelliklerine Etkisinin İncelenmesi Tanışan B. Dokuz Eylül Üniversitesi Mühendislik Fakültesi Fen ve Mühendislik Dergisi , cilt.23, sa.69, ss.1027-1032, 2021 (Hakemli Dergi)
Design Alginate Based Blends for Living Composite Fibers to Promote Wound Healing Özel C., Şengel T., Ebrahımı A., Apaydın E., Ghorbanpoor H., Eker Sarıboyacı A., et al. Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering , cilt.22, sa.SPECIAL ISSUE 2021, ss.98-111, 2021 (Hakemli Dergi)
Investigation of 3D Culture of Human Adipose Tissue-Derived Mesenchymal Stem Cells in a Microfluidic Platform Özel C., Koç Y., Topal A. E., Ebrahimi A., Şengel T., Ghorbanpoor H., et al. Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering , cilt.22, sa.SPECIAL ISSUE 2021, ss.85-97, 2021 (Hakemli Dergi)
Cryogenic Process Optimization for Medium Carbon Spring Steels ÖZDEN R. C., LÖKÇÜ E., ANIK M. The Eurasia Proceedings of Science, Technology, Engineering & Mathematics (EPSTEM) , cilt.16, ss.14-19, 2021 (Hakemli Dergi)
HIGHLY SENSITIVE LABEL-FREE ELECTROCHEMICAL DETECTION OF HEAT SHOCK PROTEIN WITH LOW-COST SCREEN-PRINTED ELECTRODES Doğan Güzel F., Akçakoca İ., Ghorbanpoor H., Norouz Dizaji A., Özturk Y., Blair E., et al. Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering , cilt.22, sa.4, ss.344-352, 2021 (Hakemli Dergi)
Synthesis of rGO/g-C3N4 Composite Cathodes for Li – Ion – Oxygen Battery LÖKÇÜ E., KAÇAR N., ÖZDEN R. C., ANIK M. The Eurasia Proceedings of Science, Technology, Engineering & Mathematics (EPSTEM) , cilt.16, ss.47-51, 2021 (Hakemli Dergi)
Investigation of the Effect of Some Factors on Resistance Spot Welding of DKP Steel Using Response Surface Method TAŞDEMİR A., BAKSAN B., ÇELİKYÜREK İ. The Eurasia Proceedings of Science, Technology, Engineering & Mathematics (EPSTEM) , cilt.16, ss.145-152, 2021 (Hakemli Dergi)
Synthesis of Graphene/g-C3N4 Composite Photo-Electrodes for Li – Ion – Oxygen Battery KAÇAR N., LÖKÇÜ E., ÖZDEN R. C., ANIK M. The Eurasia Proceedings of Science, Technology, Engineering & Mathematics (EPSTEM) , cilt.16, ss.162-166, 2021 (Hakemli Dergi)
Effect of Secondary Aging of AA7075 Aluminum Alloy to Hardness BAKSAN B., TAŞDEMİR A., ÇELİKYÜREK İ. The Eurasia Proceedings of Science, Technology, Engineering & Mathematics (EPSTEM) , cilt.16, ss.20-25, 2021 (Hakemli Dergi)
The Effect of Wnt/Beta-Catenin Signaling Pathway in Osteogenic Differentiation Stages of Human Adipose Tissue Derived Mesenchymal Stem Cells Eker Sarıboyacı A., Uysal O., Avcı H., Semerci Sevimli T., Ghorbanı A., Koç Y. 6. Uluslararası Erciyes Bilimsel Araştırmalar Kongre Kitapçığı , cilt.6, sa.6, ss.4-6, 2021 (Düzenli olarak gerçekleştirilen hakemli kongrenin bildiri kitabı)
Effect of Alloying on the Microstructure and Strength of the Ni Bronzes ÇELİKYÜREK İ., BAKSAN B., TAŞDEMİR A. The Eurasia Proceedings of Science, Technology, Engineering & Mathematics (EPSTEM) , cilt.16, ss.8-13, 2021 (Hakemli Dergi)
Determination ARIMA Model for the Discharge Acid Concentration in Pressure Oxidation Autoclave at A Gold Processing Plant TAŞDEMİR A., ÇELİKYÜREK İ., BAKSAN B. The Eurasia Proceedings of Science, Technology, Engineering & Mathematics (EPSTEM) , cilt.16, ss.39-46, 2021 (Hakemli Dergi)
Biyomedikal Alaşımların Yüzey İşlemlerinde Güncel Yaklaşımlar; Lazer İşlemleri GEDİKOĞLU M., KOLSAL A., Tutuş H., TOKER S. M. Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji , cilt.9, sa.3, ss.413-431, 2021 (Hakemli Dergi)
Study of the Lithium Diffusion Properties of (MgCoNiLiZn)O High EntropyOxide as an Anode in Lithium-Ion Battery LÖKÇÜ E., ANIK M., ÖZDEN R. C. The Eurasia Proceedings of Science, Technology, Engineering & Mathematics (EPSTEM) , cilt.16, ss.77-81, 2021 (Hakemli Dergi)
The Effect of Initial Compacting Pressure on the Production of Ti3Al with Low Porosity ÖZTÜRK KÖRPE N., KILIÇ G., KARAŞ M. H. Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , cilt.21, ss.710-717, 2021 (Hakemli Dergi)
Synthesis and Electrochemical Performance of Spinel Crystal Structured ((FeNiCrMn)1-xCox)3O4 (x=0.1, 0.2, 0.3) High Entropy Oxides ÇAYIRLI M., ERDOĞAN ESEN E., LÖKÇÜ E., ANIK M. The Eurasia Proceedings of Science, Technology, Engineering & Mathematics (EPSTEM) , cilt.16, ss.140-144, 2021 (Hakemli Dergi)
Four-Dimensional Printing Technology at the Frontier of Advanced Modeling and Applications in Brain Tissue Engineering SOYKAN M. N., ŞENGEL T., Ebrahimi A., ALTUĞ TASA B., GHORBANPOOR H., UYSAL O., et al. Journal of Medical Innovation and Technology , cilt.3, sa.2, ss.46-57, 2021 (Hakemli Dergi)
AISI 316 L Paslanmaz Çelik ile Fe60Al40 Metaller arası Bileşiğin Sürtünme Kaynağı ile Birleştirilmesi ÇELİKYÜREK İ., TORUN O., BAKSAN B., Özcan A. El-Cezeri Fen ve Mühendislik Dergisi , cilt.7, sa.1, ss.267-274, 2020 (Scopus)
EFFECT OF SECONDARY AGING of EN AC 43200 ALUMINUM ALLOY to MECHANICAL PROPERTIES BAKSAN B., ÇELİKYÜREK İ., kılıç Y. The International Journal of Materials and Engineering Technology , cilt.3, sa.1, ss.16-20, 2020 (Hakemli Dergi)
Secondary Aging Effects in Copper - Chromium Alloy BAKSAN B., ÇELİKYÜREK İ., TORUN O. The Eurasia Proceedings of Science, Technology,Engineering Mathematics (EPSTEM) , cilt.11, ss.155-159, 2020 (Hakemli Dergi)
Effect of Mg Content on the Electrochemical Properties of (MgCoNiZnLi)O Based High Entropy Oxides for Li-Ion Batteries LÖKÇÜ E., ÖZDEN R. C., ANIK M. The Eurasia Proceedings of Science, Technology,Engineering Mathematics (EPSTEM) , cilt.11, ss.53-56, 2020 (Hakemli Dergi)
Effects of Deep Cryogenic Treatment on the Mechanical Properties of Medium Carbon Spring Steels ÖZDEN R. C., LÖKÇÜ E., ANIK M. The Eurasia Proceedings of Science, Technology, Engineering and Mathematics , cilt.11, ss.48-52, 2020 (Hakemli Dergi)
Boriding of Ni40Al TORUN O., ÇELİKYÜREK İ., BAKSAN B. The Eurasia Proceedings of Science, Technology,Engineering Mathematics (EPSTEM) , cilt.11, ss.64-68, 2020 (Hakemli Dergi)
The Effect of Si Addition on the Microstructure and Mechanical Properties of ZA-12 Alloy ÇELİKYÜREK İ., TORUN O., BAKSAN B. The Eurasia Proceedings of Science, Technology,Engineering Mathematics (EPSTEM) , cilt.11, ss.168-174, 2020 (Hakemli Dergi)
Fe3Al ve Ti6Al4V alaşımlarının difüzyon kaynağı TORUN O., ÇELİKYÜREK İ. Eskişehir Osmangazi Üniversitesi Mühendislik ve mimarlık fakültesi dergisi , cilt.28, sa.3, ss.235-240, 2020 (Hakemli Dergi)
Effects of Deep Cryogenic Treatment on the Microstructural Properties of Medium Carbon Spring Steels ÖZDEN R. C., LÖKÇÜ E., ANIK M. The Eurasia Proceedings of Science, Technology, Engineering and Mathematics , cilt.11, ss.5-8, 2020 (Hakemli Dergi)
Mikrodeformasyon ile Yüzey Özellikleri Değiştirilen 316L Paslanmaz Çeliğin Sentetik Vücut Sıvısı ile Etkileşimi TOKER S. M., Battal E., Demir Z., Çevik K. E. Düzce Üniversitesi Bilim ve Teknoloji Dergisi , cilt.8, sa.4, ss.2455-2467, 2020 (Hakemli Dergi)
Impedance testing of porous Si3N4 scaffolds for skeletal implant applications Akbulut S. O., Ghorbanpoor H., Iptec B. O., Butterworth A., Avcioglu G., Kozaci L. D., et al. SN Applied Sciences , cilt.2, sa.5, 2020 (ESCI)
Microstructural Evolution and Mechanical Properties of Mg Added ZA-12 Alloy ÇELİKYÜREK İ., BAKSAN B., TORUN O. The Eurasia Proceedings of Science, Technology,Engineering Mathematics (EPSTEM) , cilt.11, ss.57-63, 2020 (Hakemli Dergi)
Resistance Spot Welding of ZAMAK 12 TORUN O., BAKSAN B., ÇELİKYÜREK İ. The Eurasia Proceedings of Science, Technology,Engineering Mathematics (EPSTEM) , cilt.11, ss.9-13, 2020 (Hakemli Dergi)
Effect of Co Content on the Electrochemical Properties of (MgCoNiZnLi)O Based High Entropy Oxides for Li-Ion Batteries LÖKÇÜ E., ÖZDEN R. C., ANIK M. The Eurasia Proceedings of Science, Technology,Engineering Mathematics (EPSTEM) , cilt.11, ss.29-32, 2020 (Hakemli Dergi)
The Anode Performance of the Mg0.2Co0.2Ni0.2Zn0.2Li0.1Cu0.1O High Entropy Oxide for Li-Ion Batteries LÖKÇÜ E., ÖZDEN R. C., ANIK M. The Eurasia Proceedings of Science, Technology,Engineering Mathematics (EPSTEM) , cilt.11, ss.136-140, 2020 (Hakemli Dergi)
Biologically modified microelectrode sensors provide enhanced sensitivity for detection of nucleic acid sequences from Mycobacterium tuberculosis Blair E. O., Hannah S., Vezza V., AVCI H., Kocagoz T., Hoskisson P. A., et al. Sensors and Actuators Reports , cilt.2, sa.1, ss.100008, 2020 (ESCI)
Influence of Intermittent Aging in AA7075 Aluminum Alloy BAKSAN B., ÇELİKYÜREK İ., TORUN O. The Eurasia Proceedings of Science, Technology,Engineering Mathematics (EPSTEM) , cilt.11, ss.141-145, 2020 (Hakemli Dergi)
Ni75Al25 alaşımı ve 316 L paslanmaz çeliğin bakır ara tabaka kullanılarak difüzyon kaynağı TORUN O., ÇELİKYÜREK İ., BAKSAN B. El-Cezeri Fen ve Mühendislik Dergisi , cilt.6, sa.3, ss.517-524, 2019 (Hakemli Dergi)
Effect of Stirring on the Microstructure and Mechanical Properties ofZAMAK-12 Alloy ÇELİKYÜREK İ., TORUN O. The Eurasia Proceedings of Science Technology Engineering and Mathematics , cilt.7, ss.136-140, 2019 (Scopus)
Seramik Karoların Altın Dekorasyonunda Katodik Ark- FBB TiN Kaplama Proses Parametrelerinin Optimizasyonu TANIŞAN B. Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , cilt.19, sa.15703, ss.186-192, 2019 (Hakemli Dergi)
The Effect of the Friction Pressure on the Friction Welding of AZ91 andFe3Al Alloys TORUN O., ÇELİKYÜREK İ. The Eurasia Proceedings of Science Technology Engineering and Mathematics , cilt.7, ss.175-180, 2019 (Scopus)
An investigation of structural properties and surface morphologies of electrochemically fabricated nanocrystalline Ni-Co-Cu/ITO deposits with different compositions SARAÇ U., BAYKUL M. C. TURKISH JOURNAL OF PHYSICS , cilt.43, sa.4, ss.372-382, 2019 (ESCI)
SYNTESIS AND ELECTROCHEMICAL PERFORMANCE OF THE (Mg0.2Co0.2Ni0.2Zn0.2Li0.2)O HIGH ENTROPY OXIDE AS ANODE MATERIAL FOR Li-ION BATTERIES ANIK M., LÖKÇÜ E. The Eurasia Proceedings of Science, Technology,Engineering Mathematics (EPSTEM) , cilt.7, ss.329-332, 2019 (Hakemli Dergi)
Effects of Surface Characteristics on the in Vitro Biocompatibility Response of Niti Shape Memory Alloys TOKER S. M., Sugerman G., Frey E. C. Academic Platform Journal of Engineering and Science , cilt.7, sa.2, ss.112-116, 2019 (Hakemli Dergi)
HIGH PERFORMANCE FIBERS: A REVIEW ON CURRENT STATE OF ART AND FUTURE CHALLENGES AVCI H., Hassanin A., Hamouda T., KILIÇ A. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi , cilt.27, sa.2, ss.130-155, 2019 (Hakemli Dergi)
POLİMETİLMETAKRİLAT MALZEMENİN MİKRODALGA İLE OTOJEN KAYNAĞI BAKSAN B. Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi , cilt.8, sa.1, ss.576-582, 2019 (Hakemli Dergi)
EPOKSİ MATRİSLİ KOMPOZİTLERDE KATI YAĞLAYICI İLAVESİNİN SÜRTÜNME KAYBININ AZALTILMASINA ETKİSİNİN İNCELENMESİ YAMAN ISLAK B., AÇIKBAŞ G., ÇALIŞ AÇIKBAŞ N. Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi , cilt.8, sa.1, ss.583-592, 2019 (Hakemli Dergi)
GÜÇ TUTUŞUR POLİPROPİLEN POLİMERİ VE LİF UYGULAMALARINDA SON GELİŞMELER VE GELECEK BEKLENTİLERİ AVCI H., ÜREYEN M. E., KILIÇ A., Saglam E. A., DEMİR A. Uludağ University Journal of The Faculty of Engineering , cilt.24, sa.2, ss.609-632, 2019 (Hakemli Dergi)
Yüksek Sıcaklık Hacim Yanma Sentezi ile Üretilen Fe3Al MalzemedePresleme Basıncının ve Isıtma Hızının Gözeneklilik ve Mikro SertlikÜzerine Etkisinin Araştırılması ÖZTÜRK KÖRPE N., YÜCEL B. C., KOÇ N. Bitlis Eren Üniversitesi Fen Bilimleri Dergisi , cilt.8, sa.2, ss.521-532, 2019 (Hakemli Dergi)
Surface Property Dependent Biocompatibility Analysis of NiTi Shape Memory Alloys to be used inRoot Canal Shaping Applications TOKER S. M. International Journal of Dentistry and Oral Science (IJDOS) , cilt.2, ss.1-4, 2018 (Scopus)
Dry sliding behaviour of boron waste reinforced epoxy matrix composites YAMAN B., ÇALIŞ AÇIKBAŞ N. Journal of Boron , cilt.3, sa.2, ss.63-70, 2018 (Hakemli Dergi)
A NOVEL APPROACH FOR WATER TREATMENT BY USING ACTIVATED CARBON : APRICOT KERNEL SHELL Adhami S., Ghorbanpoor H., Azak B., Kapucu S., Nurbaş M., Avcı H. Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online) , cilt.26, sa.1, ss.1-7, 2018 (Hakemli Dergi)
NİKEL-TİTANYUM ŞEKİL BELLEKLİ ALAŞIMLARIN ÖRNEK GEOMETRİSİNE BAĞLI MEKANİK ÖZELLİK VE BİYOUYUMLULUK ANALİZİ Toker S. M. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi , cilt.26, sa.1, ss.8-13, 2018 (Hakemli Dergi)
The influence of deposit composition controlled by changing the relative Fe ion concentration on properties of electroplated nanocrystalline Co-Fe-Cu ternary thin films SARAÇ U., KAYA M., BAYKUL M. C. TURKISH JOURNAL OF PHYSICS , cilt.42, sa.2, ss.136-145, 2018 (ESCI)
Investigation of Boro/Carbothermic and Carbothermic Reduction Synthesized Calcium Hexaborides YILMAZ D., SAVACI U., KOÇ N., TURAN S. Journal of Boron , cilt.3, ss.103-108, 2018 (Hakemli Dergi)
INFLUENCE OF SI AND AL ON TI-MAX PHASE FORMATIONTHROUGH SPARK PLASMA SINTERING YAMAN B., AYAS E. International Journal of Electrical, Electronics and Data Communication , cilt.6, sa.8, ss.19-22, 2018 (Hakemli Dergi)
PRODUCTION AND ANALYSIS OF FUNCTIONAL SEBS NANOFIBERS BY ELECTROSPINNING Avcı H., Akkulak E., Gergeroglu H., Ghorbanpoor H., Baksan B., Doğan Güzel F. Eskişehir Osmangazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi , cilt.26, sa.2, ss.40-46, 2018 (Hakemli Dergi)
INFLUENCE OF VACUUM APPLICATION ON THE TRIBOLOGICAL PROPERTIES OF PORCELAIN WASTE REINFORCED EPOXY COMPOSITES ÇALIŞ AÇIKBAŞ N., YAMAN B., AÇIKBAŞ G. Selcuk University Journal of Engineering, Science and Technology , cilt.6, sa.1, ss.55-69, 2018 (Hakemli Dergi)
Yerli Borik Asitten Kalıntı Karbon İçermeyen Bor Karbür Sentezi YILMAZ D., KOÇ N., TURAN S. Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi , cilt.18, sa.1, ss.306-314, 2018 (Hakemli Dergi)
Use of molten salt method in the synthesis of metal hydride electrode materials ANIK M. The online journal of science and technology , cilt.7, sa.3, ss.164-168, 2017 (Hakemli Dergi)
Sustainable Approach to Produce Polyurethane Composite Foams with Natural Materials AVCI H., Ozdemir A. U. Celal Bayar Üniversitesi Fen Bilimleri Dergisi , 2017 (Hakemli Dergi)
Effect of cubic boron nitride addition on the properties of aluminium composite foams YAMAN B., ÖZTÜRK KÖRPE N., Onuklu E. Advances in Materials and Processing Technologies , cilt.3, sa.1, ss.83-89, 2017 (Scopus)
Investigation Of 3D Bio-Composite Structures Using Vacuum Infusion Method Via Chicken Feathers Fibers Nurbaş M., Ghorbanpoor H., Avcı H. Journal of Advanced Research in Engineering Technology , cilt.1, sa.2, ss.5-10, 2017 (Hakemli Dergi)
Production of aluminium–fly ash particulate composite by powder metallurgy technique using boric acid as foaming agent ÖZTÜRK KÖRPE N., ÖZKAN E., TAŞCI U. Advances in Materials and Processing Technologies , cilt.3, sa.1, ss.145-154, 2017 (Scopus)
Nikel Esaslı Süperalaşım Rene 41’xxin Tornalama İşlemi tali d., GAŞAN H., GÜLEŞEN M., GÜRGEN S., KUŞHAN M. C. TEI Post , 2017 (Hakemsiz Dergi)
TURNING OPERATION OF NICKEL BASED SUPERALLOY RENE 41 Tali D., GAŞAN H., GÜLEŞEN M., GÜRGEN S., KUŞHAN M. C. International Journal of Mechanical and Production Engineering , cilt.5, sa.5, 2017 (Hakemli Dergi)
FUNCTIONAL COMPOSITE NANOFIBERS DERIVED FROM NATURAL EXTRACT OF SATUREJA HORTENSIS GERGEROĞLU H., AVCI H. Anadolu University Journal of Science and Technology-A Applied Sciences and Engineering , cilt.18, sa.5, ss.908-918, 2017 (Hakemli Dergi)
Atık Boya Çamuru ile Üretilen Betonların özellikleri Ghorbanpoor H., TOPÇU İ. B., AVCI H., NURBAŞ M. yapı dünyası , cilt.252, ss.42-45, 2017 (Hakemli Dergi)
17-4 PH Paslanmaz Çelik ve Al 7075 Alaşımının Sürtünme Kaynağı TORUN O., ÇELİKYÜREK İ., BAKSAN B. El-Cezeri Fen ve Mühendislik Dergisi , cilt.4, sa.2, ss.201-208, 2017 (Scopus)
EFFECT OF Al CONTENT ON STRUCTURE AND WEAR BEHAVIOROF AlCoCrFeMoNi HIGH ENTROPY ALLOYS GAŞAN H., LÖKÇÜ E. The Online Journal of Science and Technology , cilt.7, sa.4, ss.63-67, 2017 (Hakemli Dergi)
Dry sliding friction and wear behaviours of bronze matrix composites reinforced with Ni3Al particles ÇELİKYÜREK İ., Bicer A. PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , cilt.23, sa.1, ss.40-44, 2017 (ESCI)
A Critical Approach to the Biocompatibility Testing of Niti Orthodontic Archwires UZER B., Gumus B., TOKER S. M., Sahbazoglu D., Doruk S., Yildirim C., et al. International Journal of Metallurgy and Metal Physics , cilt.1, sa.1, ss.1-7, 2016 (Hakemli Dergi)
Effects of welding parameters on microstructure and mechanical properties of friction welded AZ91 Mg alloy ÇELİKYÜREK İ., Önal E. Anadolu University Journal of Science and Technology-A Applied Sciences and Engineering , cilt.17, sa.3, ss.563-571, 2016 (Hakemli Dergi)
Effect of Reinforced Materials on Mechanical Properties of 3D Composite Structure Ghorbanpoor H., NURBAŞ M., AVCI H. International Journal of Mechanical And Production Engineering , 2016 (Hakemli Dergi)
Effects of Reinforced Materials on Mechanical Properties of 3D Composite Structure Ghorbanpoor H., Nurbaş M., Avcı H. International Journal of Mechanical and Production Engineering , cilt.5, 2016 (Hakemli Dergi)
Tungsten ilavesinin Fe3Al alaşımının Oksitlenme sülfitlenme özelliklerine etkisi ÖZTÜRK KÖRPE N., ÇELİKYÜREK İ., GÜRLER R. Eskişehir Osmangazi Üniversitesi Müh. Mim. Fak. Dergisi , cilt.24, sa.2, ss.11-21, 2011 (Hakemli Dergi)
Fe Cr siyah pigment üretiminde ferrokrom kullanımı TANIŞAN B., TURAN S. Eskişehir Osmangazi Üniv. Mühendislik-Mimarlık Fakültesi Dergisi , cilt.23, sa.2, ss.53-65, 2010 (Hakemli Dergi)
Isıl İşlemin Akımsız Ni-B Kaplamanın Mikro-Yapısına, Korozyon Direncine Ve Sertliğine Etkisi ANIK M., BAKSAN B., KÖRPE E. Eskişehir Osmangazi Üniversitesi mühendislik ve mimarlık fakültesi dergisi (online) , cilt.22, sa.2, ss.111-124, 2009 (Hakemli Dergi)
Bakır Esaslı Şekil Bellekli Alaşımların Üretimi ve Çekme Deneyi ile Karakterizasyonu BAKSAN B., GÜRLER R. SAKARYA ÜNİVERSİTESİ FEN BİLİMLERİ ENSTİTÜSÜ DERGİSİ , cilt.10, sa.1, ss.28-36, 2006 (Hakemli Dergi)
Otomotiv Endüstrisinde Magnezyum GÜRLER R., ÖZTÜRK KÖRPE N., BAKSAN B., ÇELİKYÜREK İ. Metalurji Malzeme , cilt.1, sa.1, ss.88-92, 2005 (Hakemli Dergi)
Kupol Ocaklarında Şarj Hesaplamalarının En Düşük Maliyete GöreYapılabilirliğinin Doğrusal Programlama Tekniği ile Denenmesi BAKSAN B., TAŞKIN H. Mühendis ve Makina , cilt.46, sa.551, ss.31-37, 2005 (Hakemli Dergi)
Kupol ocaklarında şarj hesaplamalarının en düşük maliyete göre yapılabilirliğinin doğrusal programlama tekniği ile denemesi Baksan B., Taşkın H. Mühendis ve Makina , cilt.46, sa.551, ss.31-37, 2005 (Hakemli Dergi)
Kitap & Kitap Bölümleri
Yerinde Oluşan Tantalyum Borür Takviyeli Alüminyum Matrisli Kompozit Malzemelerin Üretimi ve Karakterizasyonu Yılmaz F. N., Öztürk Körpe N. MALZEME VE METALURJİ MÜHENDİSLİĞİ ALANINDA ORİJİNAL ARAŞTIRMA VE DERLEMELER, Doç. Dr. Alper Bideci, Editör, Platanus Publishing, Ankara, ss.5-18, 2024
Characterization techniques for advanced research Avcı H. Mesoporous Silica Nanoparticles: Drug Delivery, Catalysis and Sensing, Sachin Namdeo Kothawade,Vishal Vijay Pande, Editör, Walter De Gruyter Gmbh, Berlin, ss.243-270, 2024
Polimerlerin Mekanik Özellikleri TOKER S. M. Polimerler: Özellikleri ve Uygulamaları, Avcı Hüseyin, Editör, Eskişehir Osmangazi Üniversitesi Yayınları, Eskişehir, ss.69-86, 2021
Polimer Yapısı ve Özelliklerine Giriş AVCI H., ŞENGEL T., Ebrahimi A. Polimerler: Özellikleri ve Uygulamaları, Avcı, Hüseyin, Editör, Eskişehir Osmangazi Üniversitesi Yayınları, Eskişehir, ss.1-27, 2021
Polimerlerin Savunma ve Havacılık Alanında Kullanımı COŞKUN Ş., DEMİRCAN Ö. Polimerler: Özellikleri ve Uygulamaları, Hüseyin Avcı, Editör, Eskişehir Osmangazi Üniversitesi Yayınevi, Eskişehir, ss.275-288, 2021
Lif ve Lifli Malzemeler Avcı H., Şengel T., Ebrahimi A. Polimerler: Özellikleri ve Uygulamaları, Avcı,Hüseyin, Editör, Eskişehir Osmangazi Üniversitesi Yayınları, Eskişehir, ss.28-69, 2021
Polimerler: Özellikleri ve Uygulamaları Avcı H. (Editör) Üniversite Yayınları, Eskişehir, 2021
A Comparative Global Overview for Flat-Plate Solar Collectors (FPSCS) in G-7 and G-20 Countries Acaroğlu H., Baykul M. C. Eurasian Economic Perspectives, Bilgin M.,Danis H.,Karabulut G.,Gözgor G, Editör, Springer, London/Berlin , Chur, ss.87-98, 2020
Physics I Experiments Labroratory Book for Engineering Students Alğın E., Peker D., İşsever U. G., Kılıç G., Aşıcı C., Baykul M. C., et al. Eskişehir Osmangazi Üniversitesi, Eskişehir, 2019
An Economic Inquiry about Flat-Plate Solar Collectors (FPSCs) for Turkey: A Case Study for a Mid-Size Anatolian City, Eskisehir Baykul M. C., Acaroğlu H. Current Issues in Turkish Economics, Çağlar Yurtseven,Mahmut Tekc, Editör, Peter Lang Publishing, Inc., Berlin, ss.131-146, 2019
A Comparative Panel Data Analysis on the Relationship between Solar Energy and Economic Growth in G-7 and G-20 Countries Acaroğlu H., Baykul M. C. Solar Energy Systems: Progress and Future Directions, Michaela Rybova, Editör, NOVA Science Publishers Inc. , New York, ss.103-129, 2019
Physics I Experiments Labroratory Book for Engineering Students ALĞIN E., PEKER D., İŞSEVER U. G., KILIÇ G., AŞICI C., BAYKUL M. C., et al. Eskişehir Osmangazi Üniversitesi, Eskişehir, 2018
Production of polyolefins Kotek R., Afshari M., Avcı H., Najafi M. Polyolefin Fibres: Structure, Properties and Industrial Applications, S C O Ugbolue, Editör, Woodhead Publishing Limited , Birmingham, ss.187-264, 2017
Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar
Integration of Micro- Environment Monitoring into the Organ-on-Chip System Dabagh S., Kaya B. M., Ebrahımı A., Eker Sarıboyacı A., Uysal O., Ghorbanpoor H., et al. 6. International Mediterranean Congress, Rome, İtalya, 13 - 15 Ağustos 2024, ss.127-128
Investigation of mesenchymal stem cell ratios on liver regeneration Seyıdova N., Tomsuk Ö., Guluzade L., Ebrahımı A., Ghorbanpoor H., Eker Sarıboyacı A., et al. 7th International Eurasian Conference on Biological and Chemical Sciences (EurasianBioChem 2024, 2 - 04 Ekim 2024, ss.23
Investigating Hepatoprotective Potential of Mesenchymal Stem Cells Against Acetaminophen-Induced Damage Guluzade L., Tomsuk Ö., Seyıdova N., Ebrahımı A., Ghorbanpoor H., Eker Sarıboyacı A., et al. 7th International Eurasian Conference on Biological and Chemical Sciences (EurasianBioChem 2024), 2 - 04 Ekim 2024, ss.22
Engineering the Surface of Gold Electrodes for Enhanced Immuno-Biosensors Benzaıt Z., Avcı H. 5th International Engineering Research Symposium, Düzce, Türkiye, 07 Mart 2024, ss.58
Establishment of three-dimensional tissue microarchitecture and microenvironment by three-dimensional bioprinting and in-vitro co-culture Yeniay S., Özel C., Uysal O., Eker Sarıboyacı A., Avcı H., Ghorbanpoor H., et al. Symposium for the Next Generation of Stem Cell Researchers (SY-STEM), Vienna, Avusturya, 13 - 15 Mart 2024, ss.22
Integration of Microfluidic Devices with Screen-Printed Electrodes for Electrochemical Sensing Ghorbanpoor H., Avcı H. 3. BİLSEL INTERNATIONAL WORLD SCIENCE AND RESEARCH CONGRESS, 17 - 18 Şubat 2024
Investigation of the Producibility of TI3AL/TIB2 Composite Powders by Volume Combustion Synthesis Paşaoğlu B., Akay Erdoğan I., Öztürk Körpe N. KOMPEGE VI 2024, İzmir, Türkiye, 27 - 29 Kasım 2024
Fabrication of Highly Adhered Gold Nanocoatings Without Metallic Intermediate Layers for Biosensing Application Benzait Z., Ghorbanpoor H., Ebrahımı A., Avcı H. 18th Nanoscience and Nanotechnology Conference (NanoTR 18), 26 - 28 Ağustos 2024, ss.259
Tungsten İlavesinin Fe3Al Metallerarası Bileşiğinin Aşınma Davranışına Etkisi Püye S., Çelikyürek İ., Öztürk Körpe N. 13. ULUSLARARASI MÜHENDİSLİK, MİMARLIK VE TASARIM KONGRESİ, İstanbul, Türkiye, 8 - 09 Haziran 2024, ss.690
Exploring anti-cancer drug activities by 3-dimensional liver cancer on a chip ABDULLAYEVA, N., Tomsuk Ö., Özel C., GHORBANPOOR H., Ebrahimi A., GASIMZADE, N., et al. 6th international eurasian conference on biological and chemical sciences eurasianbiochem, 11 - 13 Ekim 2023
HIGH-TEMPERATURE MECHANICAL BEHAVIOURS OF IRON ALUMINIDES WITH YTTRIUM ADDITION Öztürk Körpe N., Çelikyürek İ., Gürler R. 25th International Conference Materials, Methods & Technologies, Burgas, Bulgaristan, 17 - 20 Ağustos 2023, cilt.17, ss.27-33
Investigation of vascular damage in liver-cancer-on-chip model. GASIMZADE, N., Özel C., Tomsuk Ö., Ebrahimi A., GHORBANPOOR H., ABDULLAYEVA, N., et al. 6th international eurasian conference on biological and chemical sciences eurasianbiochem, 11 - 13 Ekim 2023
Liver Cancer on a Chip to Investigate Therapeutic Effect of Chemotherapy Drugs Ebrahimi A. ,., Ghorbanpoor H., Özel C., Tomsuk Ö., Abdullayeva N., Gasimzade N., et al. International Conference on Health and Medicine (ICHM-23), London, İngiltere, 24 - 25 Mayıs 2023, ss.40
Next generation in vitro technologies: Organ-on-a-chip Avcı H. Systems Biology and Bioinformatics Society Cooperation Meetings – III, İstanbul, Türkiye, 24 Aralık 2022
INVESTIGATION OF PHOTOCATALYTIC EFFECT IN TABLEWARE GLAZES Şatır G., YAMAN ISLAK B. 6th International Conference on Engineering Technologies (ICENTE’22), Konya, Türkiye, 17 Kasım 2022, ss.114
DETERMINATION OF THE PARAMETERS FOR CERAMIC-METAL JOINING Onuklu E., YAMAN ISLAK B. 3. INTERNATIONAL CAPPADOCIA SCIENTIFIC RESEARCH CONGRESS, Nevşehir, Türkiye, 11 - 12 Aralık 2022
Investigation of Vigno 1-5 Cyclotides Separation from Viola Ignobilis Through Microfluidic Chip AVCI H., Didarian R., Ebrahimi A., GHORBANPOOR H., HASHEMPOUR H., DOĞAN GÜZEL F. INTERNATIONAL EUROASIA Congress on Scientific Researches and Recent Trends 9, 18 Şubat 2022
Havacılık Endüstrisinde Kullanılan Ti–6Al–2Sn–4Zr–2Mo Ve Ti–6Al–4V Alaşımlarının 500 ve 800 ºC Sıcaklıklarda Oksitlenme Davranışının İncelenmesi Bilgiç H. B., Öztürk Körpe N. 10. Savunma Teknolojileri Kongresi, SAVTEK , Ankara, Türkiye, 13 - 15 Eylül 2022, ss.423-434
Effects of Controlled Surface Micro Modification on the Biocompatibility of Biomedical Alloys TOKER S. M., BİÇER F. 16th Nanoscience and Nanotechnology Conference, Ankara, Türkiye, 5 - 08 Eylül 2022
Synthesis of Double Transition Metal (Ti2Nb)AlC2 MAX Phase and Its Derivative (Ti2Nb)C2Tx MXene Tuzluca Yeşilbağ F. N., Yeşilbağ Y. Ö., Coşkun Ş., Yüksel R., Ertuğrul M. NANOTR-16 (16th Nanoscience and Nanotechnology Conference), Ankara, Türkiye, 5 - 08 Eylül 2022
Synthesis of Transition Metal Fe2AlB2 MAB Phase via High-Temperature Sintering Method Tuzluca Yeşilbağ F. N., Yeşilbağ Y. Ö., Coşkun Ş., Yüksel R., Ertuğrul M. NANOTR-16 (16th Nanoscience and Nanotechnology Conference), Ankara, Türkiye, 5 - 08 Eylül 2022
Adsorption challenge in the PDMS-based microfluidic systems for drug screening application Mohammadigharehbagh R., Tomsuk O., Ghorbanpoor H., Doğan Güzel F., Eker Sarıboyacı A., Avcı H. 11. Uluslararası Lif ve Polimer Araştırmaları Sempozyumu, Bursa, Türkiye, 4 - 05 Kasım 2022, ss.222-226
Menekşe Bitkisinin Ekstraktından Siklotidlerin Mikroakışkan Çip Yoluyla Eldesi Didarian R., Ebrahimi A., GHORBANPOOR H., Zendeh Z., DOĞAN GÜZEL F., AVCI H. INTERNATIONAL Congressof Health Research, 08 Aralık 2022
Ağ.%5-15 TiB2 İçeren Fe3Al Kompozitlerin Yerinde (İn situ) Üretimi ve Karakterizasyonu Öztürk Körpe N., Paşaoğlu B., Metin C. E., Özen Y. E. 2022 International Boron Symposium, İstanbul, Türkiye, 5 - 07 Ekim 2022, ss.156-158
Çok yönlü ultra kararlı bir mikro protein olan siklotidlerin antikanser özelliklerin incelenmesi Didarian R., Ebrahimi A., GHORBANPOOR H., Zendeh Z., DOĞAN GÜZEL F., LOTFIBAKHSHAYESH N., et al. 4th International Eurasian Conference on Science, Engineering and Technology (EurasianSciEnTech 2022), 14 Aralık 2022
Biomimetic Approaches to Engineer Materials for Medicine and Health Research Avcı H. 11th ULPAS, Bursa, Türkiye, 4 - 05 Kasım 2022, ss.205-206
Human Organ on a Chip: New Paradigm for Medicine and Health Research Avcı H. AIJU Technological Institute, Valencia, İspanya, 16 Mayıs 2022
INFLUENCE OF CRYOGENIC HEAT TREATMENT ON PERFORMANCE OF UNCOATED, ALCRN AND ALTIN CARBIDE CUTTING TOOLS IN MILLING OF TI6AL4V Demircan Y., Gemici S., SERT A., ULUTAN M., GAŞAN H. 6th International Conference on Advances in Mechanical Engineering, İstanbul, Türkiye, 20 Ekim 2021, ss.1541-1553
Investigation of Mesenchymal cells in the Microfluidic Cell Culture Device Özel C., Koç Y., Topal A. E., Ebrahimi A., ŞENGEL T., GHORBANPOOR H., et al. VIII. INTERNATIONAL FIBER and POLYMER RESEARCH SYMPOSIUM, 18 - 19 Haziran 2021
Cost effective alginate blend and its antibiotic release properties: Wound healing approaches. ÖZEL C., ŞENGEL T., EKER SARIBOYACI A., UYSAL O., ÖZKURT M., AVCI H. VIIIth International Fiber and Polymer Research Symposium, Bursa, Türkiye, 18 Haziran 2021, ss.61-62
The Effect of Wnt/Beta-Catenin Signaling Pathway in Osteogenic Differentiation Stages of Human Adipose Tissue Derived Mesenchymal Stem Cells. Eker Sarıboyacı A., Uysal O., Avcı H., Semerci Sevimli T., Ghorbanı A., Koç Y. 6. Uluslararası Erciyes Bilimsel Araştırmalar Kongresi, Kayseri, Türkiye, 01 Eylül 2021, ss.4-6
Synthesis and Characterization of rGO@SiO2 Nanostructures for Li-Ion Batteries CAN S., ÇAYIRLI M., LÖKÇÜ E., ANIK M. International Congress of Engineering and Natural Sciences Studies, Ankara, Türkiye, 7 - 09 Mayıs 2021
BOR ÜRÜNÜ VE ATIĞI KULLANILARAK ALÜMİNYUM KOMPOZİT KÖPÜK ÜRETİMİ ÖZTÜRK KÖRPE N., KILIÇ G. 1.ULUSLARARASI MÜHENDİSLİK VE MİMARLIK KONGRESİ, İstanbul, Türkiye, 16 Ocak 2021
Microfluidic integration onto microelectrode and its effect on electrochemistry Ali Z., Uçar A., Ghorbanpoor H., Avcı H., Doğan Güzel F. 4th International Eurasian Conference on Biological and Chemical Sciences (EurasianBioChem), Ankara, Türkiye, 24 - 26 Kasım 2021, ss.48-49
Investigation of Polar and Nonpolar Cyclotides Separation from Violet Extract Through Microfluidic Chip Didarian R., Ebrahimi A., GHORBANPOOR H., Norouz Dizaji A., DOĞAN GÜZEL F., AVCI H. VIII. INTERNATIONAL FIBER and POLYMER RESEARCH SYMPOSIUM, 18 - 19 Haziran 2021
İNSAN YAĞ DOKUSU KÖKENLİ MEZENKİMAL KÖK HÜCRELERİNOSTEOJENİK FARKLILAŞMA EVRELERİNDE WNT/BETA-KATENİN SİNYALYOLAĞININ ETKİSİ Eker Sarıboyacı A., Uysal O., Avcı H., Semerci Sevimli T., Ghorbani A., Koç Y. 6. ULUSLARARASI ERCİYES BİLİMSEL ARAŞTIRMALAR KONGRESİ, Kayseri, Türkiye, 1 - 03 Eylül 2021, ss.4-6
Microstructural and Electrochemical Properties of (Mg0.2Co0.2Ni0.2Zn0.2Li0.1Al0.1)O High Entropy Oxide Anode ÇAYIRLI M., CAN S., LÖKÇÜ E., ANIK M. International Congress of Engineering and Natural Sciences Studies, Ankara, Türkiye, 7 - 09 Mayıs 2021
MgTiMnZrNi Alaşımlarının Elektrokimyasal Hidrojen Depolama Performansları(Electrochemical Hydrogen Storage Performances of MgTiMnZrNi quaniry Alloys) KÜÇÜKDEVECİ N., AKAY ERDOĞAN I., BİNAL AYBAR A., BAYER ÖZTÜRK Z., ANIK M. 4. Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC’21 ), Nevşehir, Türkiye, 28 Mayıs 2021
Cytotoxic, Apoptotic and Wound Healing Effects of Boric Acid on Colon Cancer Cells. UYSAL O., APAYDIN E., SOYKAN M. N., GHORBANPOOR H., AVCI H. 2. Internatıonal Health and Medical Sciences Conference, Muş, Türkiye, 18 Eylül 2021, ss.98-99
KÂĞIT YÜZEYİNDE FLORESAN ÖZELLİK: FTALOSİYANİN BİLEŞİĞİNİN NANOTELLERLE ETKİLEŞİMİ CABİR B., COŞKUN Ş., AĞIRTAŞ M. S. 5. ULUSLARARASI BİLİMSEL ÇALIŞMALAR KONGRESİ, Türkiye, 15 Mart 2021
The Role of TGF‑Β Signaling Pathway in Osteogenic Differentiation Stages of Mesenchymal Stem Cells of Human Adipose Tissue Origin Eker Sarıboyacı A., Avcı H., Uysal O., Qomı Ekenel E., Ghorbanpoor H., Karakaya İ. B. 6. Uluslararası Erciyes Bilimsel Araştırmalar Kongresi, Kayseri, Türkiye, 01 Eylül 2021, ss.7-9
MgNi esaslı Alaşımlara İlave edilen Katkı Elementlerinin Hidrojen Depolama Performansına Etkisi KÜÇÜKDEVECİ N., AKAY ERDOĞAN I., BİNAL AYBAR A. 4. Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology (IMSMATEC’21 ), Türkiye, 28 Mayıs 2021
Ekran Baskılı Altın Elektrot Yüzeyine Altın Nanopartikül Modifikasyonu ve Elektrokimyasal Empedans Spektroskopisi Yöntemi İle İncelenmesi KOÇ Y., MORALI U., AVCI H. 14. Ulusal Kimya Mühendisliği Kongresi, Türkiye, 10 Haziran 2021
A novel microheater integrated microelectrode enhances the sensitivity of conventional electrochemical nucleic acid biosensors Akcakoca I., Ghorbanpoor H., Ozturk Y., Norouz Dizaji A., Blair E., Kocagoz T., et al. International Eurasian Conference on Biotechnology and Biochemistry, 16 - 18 Aralık 2020
Organ on a Chip: Opportunities and Challenges AVCI H. BioTurkiye, 5 - 07 Mart 2020
Synthesis of Li22Si5/reduced graphene oxide nanocomposite as anode material for Li-ion batteries CAN S., LÖKÇÜ E., ANIK M. 2nd international conference on natural and applied science and engineering, Türkiye, 21 - 25 Ekim 2020, ss.1-4
Synthesis and lithium storage properties of non-equiatomic MgNiCuZnCo high-entropy oxides ÇAYIRLI M., LÖKÇÜ E., ANIK M. 2nd international conference on natural and applied science and engineering, Türkiye, 21 - 25 Ekim 2020, ss.9-12
The effect of Co content on the electrochemical properties of CoMgNiZnLiO based high entropy oxides for Li ion batteries LÖKÇÜ E., ÖZDEN R. C., ANIK M. International conference on technology enginnering ans science, Türkiye, 29 Ekim - 01 Kasım 2020, cilt.11, ss.29-32
The effect of Si Addition on the Microstructure and Mechanical Properties of ZA-12 Alloy Çelikyürek İ., Torun O., Baksan B. Icontes2020: International conference on Technology, Engineering and Science, Antalya, Türkiye, 29 Ekim - 01 Kasım 2020, ss.168-174
Determination of Sintering Parameters ofTiB2 – Ti3SiC2 Composites YAMAN ISLAK B., AYAS E. ICCMSN 2020 : 22nd International Conference on Chemistry, Materials Science and Nanoscience, Bangkok, Tayland, 3 - 04 Şubat 2020, ss.198
Biomimetic approaches to tissue engineering of organoids AVCI H. VI. International Fiber and Polymer Research Symposium, 24 - 25 Ocak 2020
Effect of deep cryojenik treatment on the mechanical properties of medium carbon spring steels ÖZDEN R. C., LÖKÇÜ E., ANIK M. International conference on technology engineering and science, Antalya, Türkiye, 29 Ekim - 01 Kasım 2020, cilt.11, ss.48-52
Synergistic engineering of organoids: A platform for drug discovery and personalized medicine AVCI H. V. Life Sciences Congress, Türkiye, 21 - 22 Şubat 2020
Multifunctional, flexible, and free-standing SERS-active AgNW filter foils Demirtaş Ö., Akdemir O., COŞKUN Ş., ÜNALAN H. E., BEK A. SPIE Nanophotonics VIII, Online Only, France, 6 - 10 Nisan 2020
Surface modification of polyethylene by a simple post-treatment method Seyhan A., Tepekiran B. N., POLAT Y., KILIÇ A., DEMİR A., AVCI H. VI. International Fiber and Polymer Research Symposium, 24 - 25 Ocak 2020
The anode performance of the Mg0.2Co0.2Ni0.2Zn0.2Li0.1Cu0.1O high entropy oxide for Li-ion batteries LÖKÇÜ E., ÖZDEN R. C., ANIK M. International conference on technology, engineering and science, Antalya, Türkiye, 29 Ekim - 01 Kasım 2020, cilt.11, ss.136-140
Synthesis and lithium storage properties of non-equiatomic MgNiCuZnCo high-entropy oxides ÇAYIRLI M., LÖKÇÜ E., ANIK M. ICNASEN-2020, Antalya, Türkiye, 21 - 25 Ekim 2020
Effect of Mg content on the electrochemical properties of (MgCoNiZnLi)O based high entropy oxides for Li-ion batteries LÖKÇÜ E., ÖZDEN R. C., ANIK M. International conference on technology, engineering and science, Antalya, Türkiye, 29 Ekim - 01 Kasım 2020, cilt.11, ss.53-56
Improving flame retardancy of PE with halogen-free materials Tepekiran B. N., Seyhan A., POLAT Y., KILIÇ A., DEMİR A., AVCI H. VI. International Fiber and Polymer Research Symposium, 24 - 25 Ocak 2020
Investigation of Hot Drawing on Chain Orientation Using Linear Low-Density Polyethylene Fibers Seyhan A., Tepekiran B., POLAT Y., KILIÇ A., DEMİR A., AVCI H. VII. International Fiber and Polymer Research Symposium, 25 - 26 Eylül 2020
Effect of deep cryogenic treatment on the microstructural properties of medium carbon spring steels ÖZDEN R. C., LÖKÇÜ E., ANIK M. International conference on technology, engineering and science, Türkiye, 29 Ekim - 01 Kasım 2020, cilt.11, ss.5-8
Çeşitli Redoks Problarının Ekran Baskılı Karbon Elektrodun Elektrokimyasal Davranışı Üzerindeki Etkisinin Dönüşümlü Voltametri Yöntemi ile İncelenmesi KOÇ Y., MORALI U., EROL S., AVCI H. 32. Ulusal Kimya Kongresi, Türkiye, 17 - 19 Eylül 2020
Investigation of the Effect of Heat Treatment on Microstructure and Mechanical Properties of AERMET 100 Steel, ÖZTÜRK KÖRPE N., KARATAY R. V. International Scientific and Vocational Studies Congress – Engineering (BILMES EN 2020), 12 - 15 Aralık 2020
Effects of Deep Cryogenic Treatment on the WearProperties of 52 CrMoV4 Steel ÖZDEN R. C., ANIK M., GAŞAN H. 3rd INTERNATIONAL CONFERENCE ON ADVANCES IN NATURAL APPLIED SCIENCE ENGINEERING, 9 - 12 Mayıs 2018
Effects of Deep Cryogenic Treatment on The Mechanical Properties of 52CrMoV4 Steel ÖZDEN R. C., ANIK M. UDCS’19 Fourth International Iron and Steel Symposium, 4 - 06 Nisan 2019
Stronsiyum Hekzaborür Tozlarının SrCO3 ve NaBH4 kullanılarakKatı Hal Sentezi ile Üretim Parametrelerinin Araştırılması KOÇ N. INTERNATIONAL SYMPOSIUM ON BORON(BORON 2019), Nevşehir, Türkiye, 17 - 19 Nisan 2019, ss.235-239
Development of Crystal Cleavage for Low Molecular Weight Linear Polymer Seyhan A., Tepekiran B., POLAT Y., KILIÇ A., DEMİR A., AVCI H. 5th International Fiber and Polymer Research Symposium, Türkiye, 2 - 03 Mayıs 2019
Effect of stirring on the microstructure and mechanical properties of ZA12 alloy ÇELİKYÜREK İ., TORUN O. International conference on technology, engineering and science (icontes), Antalya, Türkiye, 26 - 29 Ekim 2019, ss.20
Mechanical and Dry Sliding Friction and Wear Properties of Zinc Alloy ZA12 Modified with Pb ÇELİKYÜREK İ. 4Th International Conference on Engineering Technology and Applied Sciences, Kiev, Ukrayna, 24 - 28 Nisan 2019, ss.394-398
PRODUCTION AND CHARACTERIZATION OF SiC REINFORCED BRASS MATRIX COMPOSITE MATERIAL BY SPS METHOD TOKAT BİRGİN P. Ç., UZ V., GÖREN R., AYDIN H., GAŞAN H., GÜRCAN K. International Conference on Material Science and Technology, Ankara, Türkiye, 18 - 20 Ekim 2019
Microstructure and Mechanical Properties(Co40Cr10Fe5Mo5Ni40)82,2Al17,8 Eutectic HighEntropy Alloy GAŞAN H., ÖZCAN A., ÇELİK O. N. 3rd INTERNATIONAL CONFERENCE ONADVANCES INNATURAL APPLIED SCIENCEICANAS 2018, 9 - 12 Mayıs 2018
The effect of the friction pressure on the friction welding of AZ91 and Fe3Al alloy TORUN O., ÇELİKYÜREK İ. International conference on technology, engineering and science (Icontes), Antalya, Türkiye, 26 - 29 Ekim 2019, ss.36
Production and Characterization of Fe3Al-Al2O3 Composite Material by High Temperature Volume Combustion Synthesis ÖZTÜRK KÖRPE N., ÇAKMAK B. 8th INTERNATIONAL CONFERENCE ON ADVANCED TECHNOLOGIES, SARAYBOSNA, Bosna-Hersek, 26 - 30 Ağustos 2019
Biocompatibility dependence of metallic biomaterials on microstructural mechanisms TOKER S. M. AAAFM-UCLA 2019, International Conference on Advances in Functional Materials in UCLA, Los-Angeles, Şili, 19 - 22 Ağustos 2019
EPOKSİ MATRİSLİ KOMPOZİTLERİN MEKANİK ÖZELLİKLERİNE ATIK FINDIK KABUĞU VE ÇAM KOZALAĞI MİKTARININ ETKİSİ AÇIKBAŞ G., Can O., YAMAN ISLAK B. III. INTERNATIONALSCIENTIFIC AND VOCATIONALSTUDIES CONGRESS – ENGINEERING(BILMES EN 2019), Ürgüp, Nevşehir, Türkiye, 27 - 30 Haziran 2019, ss.256-260
Effect of Manganese Additive Element on Mg08Ti02Ni Ternary Hydrogen Storage Alloys KÜÇÜKDEVECİ N., BİNAL AYBAR A., AKAY ERDOĞAN I., ANIK M. 4. The International Conference on Material Science and Technology in Kızılcahamam/Ankara, 18 - 20 Ekim 2019
Effect of Deep Cryogenic Treatment on the Microstructure and Wear Behavior ofAustempered Ductile Iron (GGG40) GAŞAN H., KAYA S. 4th International Conference on Engineering Technology and Applied Sciences, 24 - 28 Nisan 2019
Production and Characterization of 2024 Alloy Foam Materials Using Boron Product ÖZTÜRK KÖRPE N., ÇELİKYÜREK İ., KİREMİTÇİ S., DUR D. 4th INTERNATIONAL CONFERENCE ON MATERIALS SCIENCE AND TECHNOLOGY, Ankara, Türkiye, 18 - 20 Ekim 2019, ss.559-563
An Investigation of Weld ability of Zinc Alloy ZA12 Using Friction Welding Process ÇELİKYÜREK İ. 4th International Conference on Engineering Technology and Applied Sciences, Kiev, Ukrayna, 24 - 28 Nisan 2019, ss.172-175
The Microstructure and MechanicalProperties of Novel (Co40Cr10Fe30Nb10Ni10)92Al8 Eutectic High Entropy Alloy ÖZCAN A., GAŞAN H., ÇELİK O. N. International Conference on Modern research in Engineering, Technology Science, 29 - 31 Mart 2019
Developing Biosensors for Food Safety Analysis AVCI H., ANIL H., KOÇ Y., MORALI U., EROL S. 4th International Congress on Biosensors, Çanakkale, Türkiye, 8 - 11 Temmuz 2019
Effect of Secondary Aging of EN AC 43200 Aluminum Alloy on Mechanical Properties BAKSAN B., ÇELİKYÜREK İ., KILIÇ Y. TICMET’19, The International Conference of Materials and Engineering Technology, Gaziantep, Türkiye, 10 - 12 Ekim 2019, ss.600-605
The Phase Stability and Mechanical Properties of (Co40Cr10Fe5Mo5Ni40)82,20Al17,80Eutectic High Entropy Alloy GAŞAN H., ÖZCAN A., ÇELİK O. N. International Conference On Modern research in Engineering, Technology and Science, 29 - 31 Mart 2019
Effect Of Alloying Elements On The Wear Properties Of Cryogenically Treated Medium Carbon Spring Steels ÖZDEN R. C., ANIK M. UDCS’19 Fourth International Iron and Steel Symposium, 4 - 06 Nisan 2019
Phase stability of in situ synthesized MAX phase YAMAN ISLAK B. 2nd International Conference on Technology and Science, Burdur, Türkiye, 14 - 16 Kasım 2019, ss.91
Investigation of immobilization process of screen printed carbon electrode for an advanced biosensor: A detailed characterization Koc Y., Moralı U., Erol S., Avcı H. IV. International Scientific and Vocational Studies Congress – Engineering, Ankara, Türkiye, 7 - 10 Kasım 2019, ss.174-177
Impedance Testing of Porous Si3N4 Scaffolds for Skeletal Implant Applications Akbulut O., Özbek B., Butterworth A., Ghorbanpoor H., Avcıoğlu G., KOZACI L. D., et al. 5th International Conference on Engineering Sciences, 19 Eylül 2019
Appication of Box-Behnken Experimental Design on Resistance Spot Welding of DKP Steel TORUN O., BAKSAN B., TAŞDEMİR A., ÇELİKYÜREK İ. 4th International Conference on Engineering and Natural Sciences ICENS 2018, kiev, Ukrayna, 2 - 06 Mayıs 2018, ss.348
Diffusion welding of Nodular Cast Iron to Copper ÇELİKYÜREK İ., TORUN O., BAKSAN B. 4th International Conference on Engineering and Natural Sciences ICENS 2018, kiev, Ukrayna, 2 - 06 Mayıs 2018, ss.974-979
Characteristics of electroless NiPW coatings on AZ91 sheet ÖZDEN R. C., ANIK M. 2nd international conference on innovations in natural science and engineering, 7 - 10 Eylül 2018
Production of Magnetic Electrospun Nanofibers for Use in Cancer Threapy Gergeroglu H., AVCI H., Ghorbanpoor H., NURBAŞ M. X. International RD Brokerage Event, 8 - 09 Mart 2018
Fe25Al25Ti Alaşımının Aşınma Davranışları TORUN O., ÇELİKYÜREK İ., BAKSAN B. V. Uluslararası Multidisipliner Çalışmaları Sempozyumu (ISMS), Ankara, Türkiye, 16 - 17 Kasım 2018, cilt.2, ss.964-970
Doğal Antibakteriyal Ajanlar ile İmmobilize Edilmiş Elektrospun Nanofiberleri Kullanarak In vitro Yara İyileşmesi AVCI H., Gergeroglu H. 3rd International Fiber and Polymer Research Symposium, 8 - 09 Mart 2018
Effect of Cold work to Recrystallization Temperature and Grain Size of Cold Worked Pure Copper ÇELİKYÜREK İ., BAKSAN B., TORUN O., TAŞDEMİR A. 2nd International Conference on Innovations in Natural Science and Engineering, Kiev, Ukrayna, 7 - 10 Eylül 2018, ss.47-51
İlaç Keşfi İçin Mikroakışkan Teknolojili Çip Içerisinde Kalp AVCI H., Shin S. R., Zhang Y. S., Dokmeci M., Khademhosseini A. 3rd International Fiber and Polymer Research Symposium, 8 - 09 Mart 2018
Determination of Parameters Affecting Hardness of AA70775 Aluminum Alloy by Response Surface Method BAKSAN B., ÇELİKYÜREK İ., TAŞDEMİR A., TORUN O. 4th International Conference on Engineering and Natural Science ICENS 2018, Kiev, Ukrayna, 2 - 06 Mayıs 2018, ss.980-987
A Novel Microfluidic Liver on a Chip Platform for Prediction of Drug Toxicity Kilic T., Shin S. R., Zhang Y. S., AVCI H., Dokmeci M., Ali K. VII. Polymer Science Technology Congress with International Participation, 9 - 12 Eylül 2018
Determination of Parameters Effecting Aging Heat Treatment of AA7075 Aluminum Alloy by Response Surface Method BAKSAN B., ÇELİKYÜREK İ., TAŞDEMİR A., TORUN O. 4th International Conference on Engineering and Natural Science, Kiev, Ukrayna, 2 - 06 Mayıs 2018, ss.381
Label-Free Glucose-Sensitive Optical Hydrogel Fibers Haider B., AVCI H. X. International RD Brokerage Event, 8 - 09 Mart 2018
Production of Core–Shell Nanofibers for Controlled Drug Delivery for Their Potential Application in Wound Healing AVCI H., Ghorbanpoor H., NURBAŞ M. VII. Polymer Science Technology Congress with International Participation, 9 - 12 Eylül 2018
The Influence of Wall Tile and Glass Fiber Waste Particle Sizes on the Wear Behavior of Hybrid Epoxy Matrix Composites ÇALIŞ AÇIKBAŞ N., AÇIKBAŞ G., YAMAN B., ÖZCAN S. 1st International Symposium on Innovative Approaches in Scientific Studies (ISAS 2018), 11 - 13 Nisan 2018
Study on the sliding wear characteristics of hybrid composites: effect of Wall tile to glass fiber waste ratio ÇALIŞ AÇIKBAŞ N., YAMAN B., AÇIKBAŞ G., ÖZCAN S. II. International Scientific and Vocational Studies Congress (BILMES 2018), Türkiye, 5 - 08 Temmuz 2018, ss.604-605
Resistance Spot Welding of Fe3Al Alloy TORUN O., Alptuğ Ş., ÇELİKYÜREK İ. 4th International Conference on Engineering and Natural Sciences ICENS 2018, kiev, Ukrayna, 2 Mayıs - 06 Haziran 2018, ss.988-992
Anti-Diyabetik Kontrollü İlaç Taşıyıcı Sistemler İçin Elektroçekim Çekirdek/Kabuk Nanoliflerinin Geliştirilmesi Kara Magden G., AVCI H., NURBAŞ M. VII. Polymer Science Technology Congress with International Participation, 9 - 12 Eylül 2018
Robotic Microactuator-Controlled Catheters for Minimally Invasive Surgery AVCI H., Shin S. X. International RD Brokerage Event, 8 - 09 Mart 2018
Rapid Prototyping of Whole-Thermoplastic Microfluidics Mousavi Shaegh S. A., AVCI H., Pourmand A., Zhang Y. S., Khademhosseini A. 3rd International Fiber and Polymer Research Symposium, 8 - 09 Mart 2018
Influence of Si and Al on Ti-MAX phase formation through spark plasma sintering YAMAN B., AYAS E. ISERD 393rd International Conference on Recent Innovations in Engineering and Technology, Paris, Fransa, 12 - 13 Mayıs 2018
Synthesis of La-Ni based hydrogen storage alloys by elextro-deoxidation ANIK M. 2nd international conference on innovations in natural science and engineering, 7 - 10 Eylül 2018
Novel Nanofibre Integrated SiN Scaffolds for Skeletal Implant Applications Akbulut S. O., Ozbek Iptec B., Butterworth A., Ghorbanpoor H., Avcioglu G., Akbas Y., et al. 14th Nanoscience and Nanotechnology Conference, 22 - 25 Eylül 2018
Friction Welding of Fe3Al and AZ91 Alloys TORUN O., BAKSAN B., ÇELİKYÜREK İ., TAŞDEMİR A. 2nd International Conference on Innovations in Natural Science and Engineering, Kiev, Ukrayna, 7 - 10 Eylül 2018, ss.174-177
LOCALIZED OXIDATION AND CORROSION BEHAVIOR OFBIOMEDICAL NiTi SHAPE MEMORY ALLOYS IN RELATION TOTHEIR MICROSTRUCTURAL FEATURES TOKER S. M., Canadinc D. The Internatinonal Conference on Materials Science, Mechanical and Automotive Engineerings and Technology in ÇEŞME/İZMİR (IMSMATEC’18), İzmir, Türkiye, 10 - 12 Nisan 2018
A Comparative Global Overview for Flat-plate Solar Collectors (FPSCs) in G-7 G-20 Coutries ACAROĞLU H., BAYKUL M. C. 25th Euroasia Business and Economic Society (EBES) Conference, 22 - 25 Mayıs 2018
Exploration of Eutectic High Entropy Alloys in the AlCoCrFeMoNi System ÖZCAN A., GAŞAN H. 3rd INTERNATIONAL CONFERENCE ON ADVANCES IN NATURAL APPLIED SCIENCE (ICANAS), 09 Mayıs 2018 - 12 Mayıs 2019
Wearable Optical Fiber Sensor for Prolonged Continues Glucose Monitoring at Point of Care Haider B., AVCI H. X. International RD Brokerage Event, 8 - 09 Mart 2018
Fe3Al Alaşımının Nokta Direnç Kaynağında Kaynak Süresinin Etkisi TORUN O., ÇELİKYÜREK İ., Alptuğ Ş. V. Uluslararası Multidisipliner Çalışmaları Sempozyumu (ISMS), Ankara, Türkiye, 16 - 17 Kasım 2018, cilt.2, ss.957-963
Synthesis of Vanadium-doped Zircon Pigment by Solid-state Reaction at Low Temperature TANIŞAN B. IV. International Ceramic, Glass, Porcelain Enamel, Glaze and Pigment Congress, Eskişehir, Türkiye, 10 - 12 Ekim 2018
Direct Synthesis of La-Ni Based Hydrogen Storage Alloys from the Oxide Form BİNAL AYBAR A., ANIK M. 19. Uluslararası Metalurji ve Malzeme Kongresi, 25 - 27 Ekim 2018
Development of Ballistic Hybrid Nonwovens by Impregnated with Nanocrystalline Particles AVCI H., Gergeroglu H. X. International RD Brokerage Event, 8 - 09 Mart 2018
Microstructure and Strength of Diffusion Bonded Nodular Cast Iron to Pure Copper ÇELİKYÜREK İ., BAKSAN B., TORUN O., TAŞDEMİR A. 2nd International Conference on Innovations in Natural Science and Engineering, Kiev, Ukrayna, 7 - 10 Eylül 2018, ss.42-46
Electrochemical Hydrogen Storage: Alloy Synthesis and Characterization ANIK M. 3rd international conference on material science and technology in cappadocia (IMSTEC 18), 17 - 19 Eylül 2018
An Economic Inquiry about Flat-Plate Solar Collectors (FPSCs) for Eskisehir, Turkey BAYKUL M. C., ACAROĞLU H. International Congress on Social Sciences (FSECON), 14 - 15 Eylül 2018
Cu-Cr Alaşımlarında Yaşlandırma İşlemine Düşük Sıcaklık Yeniden Kristalleşme Tavlamasının Etkisi BAKSAN B., ÇELİKYÜREK İ., TORUN O. V. Uluslararası Multidisipliner Çalışmaları Sempozyumu (ISMS), Ankara, Türkiye, 16 - 17 Kasım 2018, cilt.2, ss.375-384
Difüzyon Kaynağı ile Birleştirilmiş Küresel Grafitli Dökme Demir ile Saf Bakır’xxın Mikroyapı ve Mukavemeti ÇELİKYÜREK İ., BAKSAN B., TORUN O. V. Uluslararası Multidisipliner Çalışmaları Sempozyumu (ISMS), Ankara, Türkiye, 16 - 17 Kasım 2018, cilt.2, ss.979-986
Fe3Al ve Ti6Al4V Alaşımının Bakır Ara Tabaka Kullanılarak Difüzyon Kaynağı TORUN O., ÇELİKYÜREK İ. V. Uluslararası Multidisipliner Çalışmaları Sempozyumu (ISMS), Ankara, Türkiye, 16 - 17 Kasım 2018, cilt.2, ss.971-978
Optimization of Resistance Spot Welding Conditions for Mild Steel by Response Surface Method TORUN O., BAKSAN B., TAŞDEMİR A., ÇELİKYÜREK İ. 2nd International Conference on Innovations in Natural Science and Engineering, Kiev, Ukrayna, 7 - 10 Eylül 2018, ss.178-184
Determination of Parameters Effecting Aging Heat Treatment of AA7075 Aluminum Alloy by Responce Surface Method BAKSAN B., ÇELİKYÜREK İ., TAŞDEMİR A., TORUN O. 4th International Conference on Engineering and Natural Sciences ICENS 2018, kiev, Ukrayna, 2 - 06 Mayıs 2018, ss.980-987
Characterization of electrotically synthesized carbon nanotubes as cathode for metal air batteries ANIK M., LÖKÇÜ E. ICONTES 2017, 26 - 29 Ekim 2017
The mechanical properties of Fe50Al35Ti15 alloys produced by casting and spark plasma sintering method AYBAR K., TORUN O., ÇELİKYÜREK İ. International Conference on Technology, Engineering and Science, 26 - 29 Ekim 2017
Katalizör Miktarının Polimer Matrisli Kompozit Malzeme Özellikleri Üzerine Etkisi AÇIKBAŞ G., ÇALIŞ AÇIKBAŞ N., YAMAN B., SOYLU Ş. 2 International Congress On Engineering Architecture And Design (UMMTK), 12 - 13 Mayıs 2017
Influence of deposition parameters on the gold-like colouration of TiN-coated glazed tiles by cathodic arc evaporation TANIŞAN B., Tosun T. International Engineering Conference (IEC2017), Antalya, Türkiye, 19 - 21 Ekim 2017
Green and Sustainable Approach for Design of Antibacterial Wound Care Dressings AVCI H., Gergeroglu H., Akkulak E., Toptas Y., ÇABUK A. International Conference on Engineering Technology and Innovation, 22 - 26 Mart 2017
Sliding friction and wear behavior of bimetal bronze-cast iron pairs ÇELİKYÜREK İ., BAKSAN B., TORUN O. 3. International Conference on Engineering and natural Sciences ICENS, Budapest, Macaristan, 3 - 07 Mayıs 2017
Synthesis of anode and cathode electrodes for Li-air batteries ANIK M., LÖKÇÜ E. METAL 2017, 24 - 26 Mayıs 2017
Friction welding of AZ91 magnesium and Ti6Al4V alloys TORUN O., ÇELİKYÜREK İ., BAKSAN B. 3. International Conference on Engineering and natural Sciences ICENS, Budapest, Macaristan, 3 - 07 Mayıs 2017
Investigation of cold work on recrystallization temperature of cold worked pure copper by differantial scanning calorimetry BAKSAN B., ÇELİKYÜREK İ., TORUN O. 3. International Conference on Engineering and natural Sciences ICENS, Budapest, Macaristan, 3 - 07 Mayıs 2017
Boya Çamurunun Geri Dönüşümü ile Isı ve Ses İzolasyonlu Hafif Konut İnşaat Yapısının Üretimi NURBAŞ M., GHORBANPOOR H., AVCI H. Endüstriyel Simbiyoz Konferansı ve Proje Pazarı, 01 Şubat 2017
Effect of Process Parameters on the Tribological Properties of Porcelain Waste Reinforced Epoxy Composites ÇALIŞ AÇIKBAŞ N., YAMAN B., AÇIKBAŞ G. BRAMAT 10th International Conference on Materials Science Engineering, 8 - 11 Mart 2017
Synthesis of La-Mg-Ni-Co Hydrogen Storage Alloys by Electro-deoxidation BİNAL AYBAR A., ANIK M. The Second International Hydrogen Technologies Congress - 2017 (IHTEC 2017), Adana, Türkiye, 15 - 18 Mart 2017
Effect of Magnesium Additive Element on the Hydrogen Storage Characteristics of La-Ni Based Alloys BİNAL AYBAR A., ANIK M. International Conference on Advances and Innovations in Engineering (ICAIE), Elazığ, Türkiye, 10 - 12 Mayıs 2017
Mechanical properties and microstructure of diffusion bonded GGG60 cast iron to commercially pure copper ÇELİKYÜREK İ., TORUN O., BAKSAN B. 3. International Conference on Engineering and natural Sciences ICENS, Budapest, Macaristan, 3 - 07 Mayıs 2017
Effect of Ti addition on microstructure and Hardness of Al1.5CoCr FeMoNi high entropy alloys GAŞAN H., LÖKÇÜ E., ÇELİK O. N., Özcan A., ÇELİKYÜREK İ., ULUTAN M. METAL 2017 26. International conference on Metallurgy and Materials, Brno, Çek Cumhuriyeti, 24 - 26 Mayıs 2017, ss.79
Synthesis of CoB Nano-Powder as Electrode Material KÜÇÜKDEVECİ N., ANIK M. 2nd International Hydrogen Technologies Congress, 15 - 18 Mart 2017
Electrochemical hydrogen storage in nanostructures LÖKÇÜ E., ANIK M. ICONTES 2017, 26 - 29 Ekim 2017
SYNTHESIS OF STRONTIUM BORATE WITH USE OF THE TURKISH CELESTITE AND BORIC ACID YILMAZ D., KOÇ N., TURAN S. 2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC’17), 11 - 13 Ekim 2017
Investigation of the Mechanism of Cryogenic Treatment on the Microstructural Changes in Tungsten Carbide Tools SERT A., ÇELİK O. N., GAŞAN H. 3th International Conference on Engineering and Natural Science - ICENS2017, Budapest, Macaristan, 3 - 07 Mayıs 2017, ss.295
Optimization of cathodic arc-PVD Titanium nitride coating process parameters for decorative applications TANIŞAN B., Tosun T. 2nd International Conference on Material Science and Technology, Nevşehir, Türkiye, 11 - 13 Ekim 2017
3D Örgülü Ve Tavuk Tüyü Takviyeli Biyokompozitler NURBAŞ M., Ghorbanpoor H., AVCI H. 2nd International Fiber and Polymer Research Symposium, 27 - 28 Nisan 2017
Talaşlı İmalatta Kullanılan Sialon Esaslı Kesici Uçların Mikroyapı Tasarımı ÇALIŞ AÇIKBAŞ N., AÇIKBAŞ G., YAMAN B., SOYLU Ş. 2 International Congress On Engineering Architecture And Design (UMMTK), 12 - 13 Mayıs 2017
THE EFFECT OF THE FRICTION PRESSURE ON THE FRICTION WELDING OF AZ91 ANDTI6AL4V ALLOS TORUN O., ÇELİKYÜREK İ., BAKSAN B. International Conference on Technology, Engineering and Science (IConTES), 26 - 29 Ekim 2017, ss.101
Surface characteristic dependent ex situ and in vitro biocompatibility analysis ofNiTi alloys TOKER S. M., UZER B., Canadinc D. BIOMED 2017, 12 - 14 Mayıs 2017
TURNING OPERATION OF NICKEL BASED SUPERALLOY RENE 41 tali d., GAŞAN H., GÜLEŞEN M., GÜRGEN S., KUŞHAN M. C. The IIER International Conference, Prag, Çek Cumhuriyeti, 21 - 22 Mart 2017, cilt.1, ss.1-3
Microwave welding of industrial polymer polyoxymethylene (POM) BAKSAN B., TORUN O., ÇELİKYÜREK İ. 3. International Conference on Engineering and natural Sciences ICENS, Budapest, Macaristan, 3 - 07 Mayıs 2017
Effect of weld tool rotational speed and travel speed on the mechanical properties of friction stir welded AA5083-H321 alloy AYBAR K., AYDINBEYLİ N. International Conference on Technology, Engineering and Science, 26 - 29 Ekim 2017
Microstructure and mechanical properties of friction welded AZ91 magnesium alloy to commercially pure copper TORUN O., BAKSAN B., ÇELİKYÜREK İ. 3. International Conference on Engineering and natural Sciences ICENS, Budapest, Macaristan, 3 - 07 Mayıs 2017
Development of porous graphene based cathodes for Li-air batteries LÖKÇÜ E., ANIK M. ICONTES 2017, 26 - 29 Ekim 2017
Effect of Mo Addition on the Microstructure and Mechanical Properties of AlCoCrFeNi Eutectic High Entropy Alloys ÖZCAN A., GAŞAN H., ÇELİK O. N. 26TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS - METAL 2017, 24 - 26 Mayıs 2017
Microfluidic Biosensor Integrated Organ-an-a-Chip System for Drug Discovery AVCI H. International Congress on Chemistry and Materials Science, 5 - 07 Ekim 2017
Synthesis of La-Mg-Ni-Co/Carbon nantube composite hydrogen storage electrodes LÖKÇÜ E., ANIK M. METAL 2017, 24 - 26 Mayıs 2017
.An Effective Natural Approach to Synthesize Magnetic Nanoparticles Ghorbanpoor H., AVCI H., NURBAŞ M. International Congress on Chemistry And Materials Science, 5 - 07 Ekim 2017
Application of Activated Carbon to the Removal of Methylene Blue in Drinking Water Adhami S., Ghorbanpoor H., NURBAŞ M., AVCI H. International Congress on Chemistry and Materials Science, 5 - 07 Ekim 2017
Kayısı Çekirdek Kabuğundan Suyun Temizlenmesine Yolculuk: Aktif Karbon ADHAMİ S., GHORBANPOOR H., AVCI H., NURBAŞ M. ESOGU Project Exhibition Event, 08 Mayıs 2017
Electrode Performans of CoB Films as Anode Materials For Lithium Ion Batteries KÜÇÜKDEVECİ N., ANIK M. 2nd International Conference of Materials Science and Technology in Cappadocia, 11 - 13 Ekim 2017
Geometry and Surface Characteristic Dependent Biocompatibility Analysis of NiTi Alloys TOKER S. M. INTERNATIONAL CONGRESS ON CHEMISTRY AND MATERIALS SCIENCE, 5 - 07 Ekim 2017
Coaxial-Electrospun Core–Shell Nanofibers for Medical Application NURBAŞ M., Ghorbanpoor H., AVCI H. 13th Nanosciemce and Nanotechnology Conference, 22 - 25 Ekim 2017
Effect of N2 flow rate on the structural and optical properties of TiNx thin films prepared by cathodic arc evaporation TANIŞAN B., Tosun T. 2nd International Conference on Material Science and Technology, Nevşehir, Türkiye, 11 - 13 Ekim 2017
Effect of Particle Size Variations on the Tribological Properties of PorcelainWaste Added Epoxy Composites YAMAN B., AÇIKBAŞ G., ÇALIŞ AÇIKBAŞ N. ICCME 2017 : 19th International Conference on Chemical and Materials Engineering, 4 - 05 Mayıs 2017
Effect of calcium carbonate addition on the gel precursor synthesize of boron carbide YILMAZ D., GÜNDÜZ Ö., KOÇ N., TURAN S. ECerS2017, 9 Temmuz - 13 Ekim 2017
3D Örgülü ve Tavuk Tüyü Takviyeli Biyokompozitler NURBAŞ M., Ghorbanpoor H., AVCI H. 2nd International Fiber and Polymer Research Symposium, 27 - 28 Nisan 2017
The Effects Of Cryogenic Treatment On The Wear ResistanceOf Grey Cast Iron Brake Discs GAŞAN H., Yatkın G. 8th International Advanced Technologies Symposium (IATS’17), 19 - 22 Ekim 2017, ss.76
Production of Fiber Reinforced Lightweight Construction Material by Recycling of Paint Sludge Avcı H., Ghorbanpoor H., Topçu İ. B., Nurbaş M. IX. International RD Brokerage Event, Bursa, Türkiye, 27 - 28 Nisan 2017
Design of Transparent and Antimicrobial PM2 5Air Filter by Using Electrospun Nanofibers NURBAŞ M., ghorbanpoor H., AVCI H. VIII. International R&D Brokerage Event, Bursa, 12-13 May 2016, Turkey., 12 - 13 Mayıs 2016
Effect of Excess Carbon Content of Boron carbide and Temperature on Synthesis of Calcium Hexaboride Powders YILMAZ ÇAKTA D., KOÇ N., TURAN S. 18th International Metallurgy and Materials Congress, 29 Ekim - 01 Kasım 2016
Electrode performances of electroless cob films KÜÇÜKDEVECİ N., ANIK M. IMSTEC 2016, 6 - 08 Nisan 2016
Synthesis of La Mg Ni Co hydrogen storage alloys by the electro deoxidation technique BİNAL AYBAR A., ANIK M. IEE8E, 11 - 13 Mayıs 2016
Production of Antibacterial and Wound Healing Nano Fibers Containing Eco Friendly and Natural Compounds Gergeroğlu H., Akkulak E., Ghorbanpoor H., BAKSAN B., NURBAŞ M., AVCI H. 12th International Nanoscience and Nanotechnology Conference, Kocaeli, 3-5 June 2016, Turkey., 3 - 05 Haziran 2016
Deneysel yanık modelinde yeni standart düzenek ARDA M. S., KOÇMAN A. E., SÖZTUTAR E., BAKSAN B., ÇETİN C. 20. ulusal çocuk cerrahisi vehemşireliği kongresi, Türkiye, 26 - 30 Ekim 2016
Fiber Textile Technology for Musculoskeletal Tissue Engineering Applications Yazdi I., Fallahi A., Costa Almeida R., AVCI H., Tamayol A., Khademhosseini A. Biomedical Engineering Society (BMES) Annual Meeting, 5 - 08 Ekim 2016
A new apparatus for standardization of experimental burn model ARDA M. S., KOÇMAN A. E., SÖZTUTAR E., BAKSAN B., ÇETİN C. 34. ULUSAL ÇOCUK CERRAHİSİ KONGRESİ, Türkiye, 26 Nisan - 30 Ekim 2016
Dynamic Manipulation of Thermoplastic Elastomer of Poly styrene b ethylene cobutylene b styrene for Engineering Functional Electrospun Nanofibers Akkulak E., Gergeroğlu h., ghorbanpoor H., BAKSAN B., NURBAŞ M., AVCI H. 12th International Nanoscience and Nanotechnology Conference, Kocaeli, 3-5 June 2016, Turkey., 3 - 05 Haziran 2016
Synthesis and characterization of nanosized cobalt chromite pigment prepared by microwave assisted polyol method TANIŞAN B., Dondi M. ICENS International Conference on Engineering and Natural Sciences, Saraybosna, Bosna-Hersek, 24 - 28 Mayıs 2016
17 4 PH paslanmaz çelik ve Al 7075 alaşımının sürtünme kaynağı ile birleştirilmesi TORUN O., ÇELİKYÜREK İ., BAKSAN B. Uluslararası Kaynak Teknolojileri Konferansı ve Sergisi, Gaziantep, Türkiye, 11 - 13 Mayıs 2016, cilt.2, ss.1361-1369
AZ91 Mg Alaşımının Sürtünme Kaynağı ÇELİKYÜREK İ., Önal E. Uluslararası Kaynak Teknolojileri Konferansı ve Sergisi, Gaziantep, Türkiye, 11 - 13 Mayıs 2016, cilt.2, ss.1370-1376
Toxicological Evaluation of High Aspect Ratio Silver Nanowires CHAREH SAZ M., COŞKUN Ş., ÜNALAN H. E., REİS R., helvacıoğlu s., AYDIN A. 12th International Nanoscience and Nanotechnology Conference, 3 - 05 Haziran 2016
Effect of Mo Content on Structure and Wear Behavior of AlCoCrFeMoxNi x 0 5 1 0 High Entropy Alloys GAŞAN H., LÖKÇÜ E., özcan a., ÇELİK O. N., ÇELİKYÜREK İ., ULUTAN M., et al. 25th International Conference on Metallurgy and Materials, Bruno, Çek Cumhuriyeti, 25 - 27 Mayıs 2016
Design of antibacterial and eco friendly wound dressings by using natural additives substance NURBAŞ M., ghorbanpoor H., AVCI H. 6th International Congress on Nanoscience & Nanotechnology, 26-28 October 2016, Tehran, Iran, 26 - 28 Ekim 2016
Study of Paint Sludge Emissions from Polymeric Composites ghorbanpoor H., Akkulak e., Gergeroglu h., civan l., NURBAŞ M., AVCI H. 46th IUPAC World Polymer Congress, 17-21 July 2016, Istanbul, Turkey., 17 - 21 Temmuz 2016
Synthesis and characterization of A2B7 type hydrogen storage alloys BİNAL AYBAR A., ANIK M. IMSTEC 2016, 6 - 08 Nisan 2016
SYNTHESIS OF TI-NI BASED HYDROGEN STORAGE ALLOY IN MOLTEN SALT ANIK M. 25th Anniversary International Conference on Metallurgy and Materials (METAL), Brno, Çek Cumhuriyeti, 25 - 27 Mayıs 2016, ss.1280-1284
Corrosion properties of Ni P W Al2O3 Electroless composite coatings on AZ91 magnesium alloy Taşcı S., ÖZDEN R. C., ANIK M. 18th international metallurgy and materials congress, 29 Eylül - 01 Ekim 2016
Synthesis of cob nanopowder and determination of their electrode performances KÜÇÜKDEVECİ N., ANIK M. IMSTEC 2016, 6 - 08 Nisan 2016
The Effect of Process Control Agent PCA Usage on the Structural Properties of MgB2 Syntheses by High Energy Ball Mill KURAMA H., Erkuş S., GAŞAN H. The 10th Asian Meeting of Electroceramics, 4 - 07 Aralık 2016
EFFECT OF Al CONTENT ON STRUCTURE AND WEAR BEHAVIOR OF AlCoCrFeMoNi HIGH ENTROPY ALLOYS GAŞAN H., LÖKÇÜ E. International Science and Technology Conference, 13 - 15 Temmuz 2016
Investigation of 3d Bio Composite Structures Using Vacuum Infusion Method via Chicken Feathers Fibers NURBAŞ M., ghorbanpoor H., AVCI H. ” IAARHIES 28th International Conference on Engineering & Technology ICET, 18-19 September 2016, Shanghai, China, 18 - 20 Eylül 2016
A textile platform using mechanically reinforced hydrogel fibres towards engineering tendon niche Almeida R., Tamayol A., Yazdi I., AVCI H., Fallahi A., Annabi N., et al. TERMIS-EU 2016, 28 Haziran - 01 Temmuz 2016
Tİ3AL METALLERARASI BİLEŞİĞİNİN SÜRTÜNME KAYNAĞI BAKSAN B., ÇELİKYÜREK İ., TORUN O., ÖZCAN A. ICWET'16, 4.ULUSLARARASI KAYNAK TEKNOLOJİLERİ KONFERANSI VE SERGİSİ, Gaziantep, Türkiye, 11 - 13 Mayıs 2016, cilt.2, ss.1428-1436
Textile Platform for Musculoskeletal Tissue Engineering Yazdi I., Fallahi A., AVCI H., Tamayol A., Khademhosseini A. NIH- Training Grantees Meeting, 11 - 12 Temmuz 2016
Ni-Al Alaşımlarının Borlanmasında Box-Behnken Deney Tasarımının Uygulanması TORUN O., TAŞDEMİR A., ÇELİKYÜREK İ., BAKSAN B. 1st International Conference on Engineering Technology and Applied Sciences, Afyonkarahisar, Türkiye, 21 - 22 Nisan 2016, ss.439
SYNTHESIS and CHARACTERİZATİON of A2B7 TYPE HYDROGEN STORAGE ALLOYS BİNAL AYBAR A., ANIK M. International Material Science and Technology in Cappadocia (IMSTEC’16), April 6-8, 2016, Nevsehir, Turkey, Nevşehir, Türkiye, 6 - 08 Nisan 2016, ss.819-822
AZ91 Magnezyum Alaşımı Üzerine Yapılan Akımsız Ni-P-W / Al2O3 Kompozit Kaplamaya Uygulanan Isıl İşlemin Kaplamanın Korozyon Özelliklerine Etkisi TAŞÇI S., ÖZDEN R. C., ANIK M. 14th International Corrosion Symposium, 5 - 07 Ekim 2016
Investigation of morphology of polished marble surfaceby Atomic Force Microscopy AFM ANKARA H., ARAS H., ÇELİKYÜREK İ., YEREL KANDEMİR S. WMESS 2016, Prague, Çek Cumhuriyeti, 5 - 09 Eylül 2016
Textile Tissue Engineering: A Path Towards Organ Weaving Ali T., Iman Y., Afsoon F., Mahboubeh N., AVCI H., Raquel C., et al. 10th World Biomaterials Congress, 17 - 22 Mayıs 2016, cilt.4
The effects of the constituents on the mechanical prepertios of the polyester matrix composites reinforced with calcite particulates ÇELİKYÜREK İ. International science and technology conference, ISTEC 2016, Viyana, Avusturya, 13 - 15 Temmuz 2016, ss.1003-1006
Friction welding of the AISI 316 stainless steel to commercially pure copper ÇELİKYÜREK İ. International science and technology conference, ISTEC 2016, Viyana, Avusturya, 13 - 15 Temmuz 2016, ss.430
Corrosion characteristics of nanocrystalline Ni W electrolytic coating ADIGÜZEL Z., ANIK M. EOROCORR 2016, 11 - 15 Ekim 2016
Mechanically Reinforced Hydrogel Fibers for Tendon Tissue Engineering CostaAlmeida R., Tamayol A., Yazdi I., AVCI H., Fallahi A., Annabi N., et al. 5th Portuguese Young Chemists Meeting (5th PYCheM) and 1st European Young Chemists Meeting (1st EYCheM), 26 - 29 Nisan 2016
Effect of process variables on synthesis of MgB2 by a high energy ball mill KURAMA H., Erkus S., GAŞAN H. Mineral Engineering Conference (MEC), Swieradow Zdroj, Polonya, 25 - 28 Eylül 2016, cilt.8
Synthesis of carbon nanotubes via molten salt technique for li air batteries ANIK M., LÖKÇÜ E. 18th ınternational metallurgy and materials congress, 29 Ekim - 01 Kasım 2016
Use of molten salt method in the synthesis of metal hydride electrode materials ANIK M. 2016 ISTEC, 13 - 15 Temmuz 2016
DEVELOPMENT OF COMPOSITE POLYURETHANE FOAM USING ENVIRONMENTALLY FRIENDLY MATERIALS Ozdemir A. U., Gergeroglu H., AVCI H. 28. Ulusal Kimya Kongresi, Türkiye, 15 - 21 Ağustos 2016
Ni3Al PARTİKÜLLERİ İLE PEKİŞTİRİLMİŞ BRONZ MATRİSLİ FRENBALATA MALZEMELERİ aytaç b., ÇELİKYÜREK İ. ULUSLAR ARASI KATILIMLI III. EGE KOMPOZIT MALZEMELER SEMPOZYUMU, Aydın, Türkiye, 5 - 07 Kasım 2015, ss.423-429
Development of Novel 3D Reinforced Composites for Advanced Materials Nurbaş M., Avcı H., Hamed G., İnce M. E. Proceedings of the 6th World Conference on 3D Fabrics and their Applications, South Carolina, Amerika Birleşik Devletleri, 26 - 28 Mayıs 2015, ss.124-128
Development of Advanced 3D Knitted Fabric Based Green Composite For New Generation Automotive NURBAŞ M., GHORBANPOOR H., AVCI H., Gergeroglu H., Soykan M. N., Akkulak E. VII. International R&D Brokerage Event, 27 Mayıs 2015
Synthesis of A2B7 Type Hydrogen Storage Alloys in the Molten Salt BİNAL AYBAR A., Duygu A., ANIK M. mESC-IS 2015 International Symposium on Materials for Energy Storage & Conversion, Ankara, Türkiye, 7 - 09 Eylül 2015
Synthesis of La NixCo1 x 5 type hydrogen storage alloys by electro deoxidation ANIK M., Başak H., BİNAL AYBAR A. World congress and expo on materials science & polymer engineering, Dubai, Birleşik Arap Emirlikleri, 26 - 28 Kasım 2015
Molten Salt Synthesis of La Ni Co Hydrogen Storage Alloys ANIK M., BİNAL AYBAR A., Başak H., Özdemir D. METAL 2015, Brno, Çek Cumhuriyeti, 3 - 05 Haziran 2015, ss.140
Development of New Generation Radiation Shielding Ecofriendly3D Knitted Biocomposites NURBAŞ M., GHORBANPOOR H., AVCI H., Gergeroglu H., Akkulak E. VII. International R&D Brokerage Event, Bursa, 27 Mayıs 2015
Silver Nanowire Molybdenum Oxide Nanocomposite Electrodes for Flexible Supercapacitors YÜKSEL R., COŞKUN Ş., DURUCAN C., ÜNALAN H. E. MRS Fall Meeting' 2015, 29 Kasım - 04 Aralık 2015
Bioactive Composite Living Fibers for Organ Weaving Tamayol A., Yazdi I., Nabavinia M., Fallahi A., Khoshakhlagh P., Akbari M., et al. Discover Brigham, Boston, Amerika Birleşik Devletleri, 07 Ekim 2015, ss.3
ELECTRICAL CONDUCTIVITY OF SILVERNANOWIRE POLYLACTIDE NANOCOMPOSITE FILMS DOĞANAY D., COŞKUN Ş., KAYNAK C., ÜNALAN H. E. Uluslararası Katılımlı 3. Ege Kompozit Malzemeler Sempozyumu, Türkiye, 5 - 07 Kasım 2015
Effects of Silver Nanowires on the Behavior of Polylactide Nanocomposite Films DOĞANAY D., COŞKUN Ş., ÜNALAN H. E., KAYNAK C. TMS Meeting, 15 - 19 Mart 2015
Effects of Silver Nanowires on the Behavior of Polylactide Nanocomposite Films DOĞANAY D., COŞKUN Ş., KAYNAK C., ÜNALAN H. E. TMS 2015 144th ANNUAL MEETING & EXHIBITION, 15 - 19 Mart 2015
Design of Advanced Green 3D Fiber Reinforced Composite Structures Nurbaş M., Ghorbanpoor H., Avcı H. 6th World Conference on 3D Fabrics and their Applications, North Carolina, Amerika Birleşik Devletleri, 26 - 28 Mayıs 2015
Salt Bath Nitriding of Fe72Al28 Intermetallic Alloy ÇELİKYÜREK İ. International Conference on Engineering and Natural Sciences, Üsküp, Makedonya, 15 - 19 Mayıs 2015, ss.725-729
Electromagnetic Interface Shielding Behavior of Silver Nanowire Networks alpugan e., COŞKUN Ş., DERİCİOĞLU A. F., ÜNALAN H. E. MRS Fall Meeting' 2015, Amerika Birleşik Devletleri, 29 Kasım - 04 Aralık 2015
A Comparative Analysis of Silver Nanowire Network Indium Tin Oxide and Traditional Metal Contacts for Nitride Light Emitting Diodes Açan M. B., COŞKUN Ş., ÜNALAN H. E., İMER M. B. Materials Research Society (MRS) 2015 Fall Meeting Exhibit, Boston, Symposium RR: Wide-Bandgap Materials for Energy Efficiency – Power Electronics and Solid State Lighting, Boston, Amerika Birleşik Devletleri, 29 Kasım - 04 Aralık 2015
Effect of Cubic Boron Nitride Addition on the Properties of Aluminium Composite Foams YAMAN B., ÖZTÜRK KÖRPE N., Onuklu E. The Advances in Materials and Processing Technologies (AMPT) conference, Madrid, İspanya, 14 - 17 Aralık 2015, ss.193-194
Optoelectronic Properties Of Nickel Oxide Thin Films Elaborated by Sol Gel saraç b. e., COŞKUN Ş., ÜNALAN H. E., DURUCAN C. MRS Fall Meeting' 2015, 29 Kasım - 04 Aralık 2015
Development of an Alternative Carbon Fiber Precursor via Eco-Friendly Methods AVCI H., GHORBANPOOR H., Gergeroglu H., NURBAŞ M., kotek R., Akkulak E. VII. International R&D Brokerage Event, 27 Mayıs 2015
Synthesis of L NixCo1 x 5 Type Hydrogen Storage Alloys by Electro deoxidation ANIK M., HATIRNAZ N. B., BİNAL AYBAR A. World congress and Expo on MaterialsScience & Polymer Engineering, Dubai, Birleşik Arap Emirlikleri, 26 - 28 Kasım 2015
Friction welding of FeAl intermetallic alloy and AISI 316 Stainless Steel ÇELİKYÜREK İ., TORUN O., BAKSAN B., ÖZCAN A. ICENS International Conference on Engineering and Natural Science 2015, ÜSKÜP, Makedonya, 15 Mayıs 2015, ss.743-748
THE FRICTION WELDING OF FEAL INTERMETALLIC ALLOY AND AISI 316STAINLESS STEEL ÇELİKYÜREK İ., TORUN O., BAKSAN B., özcan a. International Conference on Engineering and Natural Sciences, üsküp, Makedonya, 15 - 19 Mayıs 2015, ss.743-748
Effects of Reinforced Materials on Mechanical Properties of 3D Composite Structure GHORBANPOOR H., NURBAŞ M., AVCI H. 23rd IIER International Conference on Chemical and Biochemical Engineering (ICCBE), 11 Mayıs - 11 Aralık 2015
Effect of Reinforced Materials on Mechanical Properties of 3D Composite Structure NURBAŞ M., AVCI H., Ghorbanpoor H. International Conference of Chemical and Biochemical Engineering, 11 Aralık 2015, ss.7-10
Effect of glass compositions on the thermal and microstructural properties of TeO2 ZnO TiO2 glass systems KABALCI İ., ÖZTÜRK KÖRPE N., POLAT R. The third International Symposium on Innovative Technologies in Engineering and Science, Valencia, İspanya, 3 - 05 Haziran 2015
Development of an alternative carbon fiber precursor via eco friendly method AVCI H., Ghorbanpoor H., Gergeroglu H., Cengiz M., NURBAŞ M., Kotek R., et al. VII. International RD Brokerage Event, 27 - 29 Mayıs 2015, ss.696-697
Thermal analysis and linear optical properties of (1-x)TeO2-(x)ZnCl2 optical glasses for photonic applications KABALCI İ., ÖZTÜRK KÖRPE N., POLAT R. International Symposium on Next-Generation Electronics (ISNE 2015), Taipei, Tayvan, 4 - 06 Mayıs 2015
Production of New Generation Functional Fiber By Ecofriendly Isothermal Bath AVCI H., Ghorbanpoor H., Gergeroglu H., Cengiz M., NURBAŞ M., Kotek R., et al. VII. International RD Brokerage Event, 27 - 29 Mayıs 2015, ss.341-342
Use of Electro deoxidation in the synthesis of hydrogen storage alloys Başak H., Özdemir D., ANIK M. mESC-IS 2015 International Symposium on Materials for Energy Storage & Conversion, Ankara, Türkiye, 7 - 09 Eylül 2015
Effect of Cryogenic Treatment on The Mechanical Properties of Compacted Graphite Cast Iron GAŞAN H., AKIN C. M. 24th International Conference on Metallurgy and Materials, Brno, Çek Cumhuriyeti, 3 - 05 Haziran 2015
Production of Aluminum Foam Using Boric Acid as FoamingAgent by Space Holder Technique Processing Parameters ÖZTÜRK KÖRPE N., ÇELİKYÜREK İ., HATIRNAZ N. B., dur d. Euro PM 2014 congress and exhibition, Salzburg, Avusturya, 21 - 24 Eylül 2014
A New Generation of High Performance Functional Composite Fibers AVCI H., Kotek R. 1st International Conference of Sustainable Composite Technologies, 3 - 05 Kasım 2014
Haddelenmiş AZ91 Magnezyum Alaşımı Üzerine Ni-P-W Kaplama Uygulanması ve Kaplamanın Korozyon Karakteristikleri TAŞÇI S., ÖZDEN R. C., ANIK M. 13th International Corrosion Symposium, 15 - 17 Ekim 2014
The mechanical properties of Al Mg alloy foams produced by powder sintering using boric acid H3BO3 as foaming agent ÇELİKYÜREK İ., ÖZTÜRK KÖRPE N., HATIRNAZ N. B., dur d. Euro PM2014 congress and exhibition, Salzburg, Avusturya, 21 Eylül 2014
Creep of Fe3Al alloys with addition of Vanadium Dobes F., Dymacek P., ÇELİKYÜREK İ., TORUN O. The Czech-Japenese Workshop on High-Temperature Intermetallics, Brno, Çek Cumhuriyeti, 13 - 16 Nisan 2014
A study of fabricating copper foams using boric acid as foaming agent HATIRNAZ N. B., ÖZTÜRK KÖRPE N., ÇELİKYÜREK İ., dur d. Euro PM2014 congress and exhibition, Salzburg, Avusturya, 21 - 24 Eylül 2014
FULLY DENSE FINE GRAINED FeAl BASED INTERMETALLICSPREPARED BY SPARK PLASMA SINTERING METHOD Sima V., Cieslar M., ÇELİKYÜREK İ., TORUN O., Chraska T. The 8. pasific Rim international congress on advances materials and processing, Havai, Amerika Birleşik Devletleri, 01 Ocak 2013
Ni3Al esaslı düzenli metallerarası bileşiğin sürtünme kaynağı ile birleştirilmesi ARICI G., özcan a., ÇELİKYÜREK İ., BAKSAN B., TORUN O. 2. Uluslararası Kaynak Teknolojileri Konferansı ve Sergisi, Ankara, Türkiye, 23 - 25 Mayıs 2012, ss.329-335
Optical properties and crystallization kinetics of (TeO2)(ZnO)(TiO2) glasses Kabalci I., ÖZTÜRK KÖRPE N., Duran T., ÖZDEMİR M. 4th International Conference on Optical, Optoelectronic and Photonic Materials and Applications (ICOOPMA), Budapest, Macaristan, 15 - 20 Ağustos 2010, cilt.8, ss.2629-2632
Kemikte defekt iyileşmesine stronsiyum içeren silisyum-hidroksiapatit seramiklerinin etkisi KERMAN G., KOÇ N., VOLKAN M., KORKUSUZ P., TİMUÇİN M., KORKUSUZ F. 22. Ulusal Türk Ortopedi ve Travmatoloji Kongresi. 31 Ekim-5 Kasım 2011, Belek, Antalya ”, (Acta Orthopaedica Traumatologica Turcica 2011-Supp I), BELEK- ANTALYA, Türkiye, 31 Ekim - 05 Kasım 2011, cilt.45, ss.281-282
Investigation of the effects of ore partical size and temperatures of leaching and roasting by thiourea method NECMİ G., SELENGİL U., TUĞBA Ö., KABASAKAL O. S., KOMAÇ O. Ş. Proceedings of the 22nd International Mining Congress of Turkey, 11 - 13 Mayıs 2011, ss.387-395
Investigation of wear resistance of spark plasma sintered Co WC and cBN Co WC composites YAMAN ISLAK B., MANDAL H. 3.European Conference on Tribology, Viyana, Avusturya, 7 - 09 Haziran 2011, ss.177-182
Nano-hidroksiapatit seramiklerin mezenkimal kök hücrelerle uyumu. KORKUSUZ F., KOÇ N., ARSLAN S., KORKUSUZ P., UÇKAN D., TİMUÇİN M. 22. Ulusal Türk Ortopedi ve Travmatoloji Kongresi. (Acta Orthop”, 45, 2011-Supp I), BELEK-ANTALYA, Türkiye, 31 Ekim - 05 Kasım 2011, cilt.45, ss.281-282
Spark Plazma Sinterleme (SPS) Yöntemi ile Üretilen SiAlON Seramiklerinde Mikroyapının Tribolojik Özelliklere Etkisi YAMAN ISLAK B., MANDAL H. 15th International MetallurgyMaterials Congress, 11 - 13 Kasım 2010, ss.2096-2105
DIFFUSION BONDING OF NICKEL ALUMINIDE STAINLESS STEEL USING A COPPER INTERLAYER ÇELİKYÜREK İ., BAKSAN B., TORUN O. International science and technology conference-2010, Famagusta, Kıbrıs (Kktc), 27 - 29 Ekim 2010, ss.218-222
Thermal, optical properties and structural investigation of Tm3 doped TeO2-ZnO-TiO2 glassy system KABALCI İ., ÖZTÜRK KÖRPE N., Duran T., Özdemir M., TAY T., Özen G. Mesoscopic physics in complex media, Corsica, Fransa, 12 - 16 Temmuz 2010
Physical Properties of Cu Reinforced with Ni3Al ÖZTÜRK KÖRPE N., ÇELİKYÜREK İ., Ölçer T., GÜRLER R. PM2010 World Congress, Floransa, İtalya, 10 - 14 Ekim 2010, cilt.5, ss.219-226
DRY SLIDING WEAR BEHAVIOURS OF CAST FE28AL AND FE27 5AL20TI ALLOYS TORUN O., ÇELİKYÜREK İ., BAKSAN B. International science and technology conference-2010, Famagusta, Kıbrıs (Kktc), 27 - 29 Ekim 2010
Optical properties and crystallization kinetics of TeO2-ZnO-TiO2 glases KABALCI İ., ÖZTÜRK KÖRPE N., Duran T., Özdemir M. International Conference on Optical and Optoelectronic Properties of Materials and Applications, Budapest, Macaristan, 15 - 20 Ağustos 2010
Colour properties of porcelain tiles containing black pigments produced by rotary calcination TANIŞAN B., TURAN S. International Science and Technology conference-2010, Magosa, Kıbrıs (Kktc), 27 - 29 Ekim 2010
The effect of Al content on the boriding of Ni Al intermetallic compound BAKSAN B., TORUN O., ÇELİKYÜREK İ. International science and technology conference-2010, Famagusta, Kıbrıs (Kktc), 27 - 29 Ekim 2010, ss.753-757
Thermal, Optical Properties and Structural Investigation of Tm3+ doped TeO2-ZnO-TiO2 Glass System Kabalci I., ÖZTÜRK KÖRPE N., Duran T., ÖZDEMİR M., TAY T., Ozen G. Conference on the Mesoscopic Physics in Complex Media, Cargese, Fransa, 12 - 16 Temmuz 2010
The Sliding Wear Behaviors of Cu Reinforced with Ni3Al ÇELİKYÜREK İ., ÖZTÜRK KÖRPE N., Ölçer T., GÜRLER R. PM2010 World Congress, Flores, Guatemala, 10 - 14 Ekim 2010, cilt.5, ss.195-202
Fe Mn containing black ceramic pigments production and characterisation from cost effective raw materials TANIŞAN B., TURAN S. 1. International Ceramic, Glass, Porselain Enamel, Glaze and Pigment Congress, Eskişehir, Türkiye, 12 - 14 Ekim 2009
Ivestigation of oxidation sulfidation behaviour of Fe 28Al 0 5 1 5 W alloys ÖZTÜRK KÖRPE N., GÜRLER R., ÇELİKYÜREK İ. 5. Discussion Meeting on the Development of Innovative Iron Aluminium Alloys FeAl 2009, Prag, Çek Cumhuriyeti, 21 - 24 Eylül 2009
Comparison of rotary and static calcination in ceramic pigment production TANIŞAN B., TURAN S. 1. International Ceramic, Glass, Porcelain Enamel, Glaze and Pigment Congress, Eskişehir, Türkiye, 12 - 14 Ekim 2009, ss.647
Development of black ceramic pigments from chromite and hematite mixtures Tanışan B., Turan S. 1. International Ceramic, Glass, Porcelain Enamel, Glaze and Pigment Congress, Eskişehir, Türkiye, 12 - 14 Ekim 2009, ss.1127-1134
Spark Plazma Yöntemiyle Sinterlenmiş cBN Katkılı Tungsten Karbür/Kobalt Malzemeler YAMAN ISLAK B., MANDAL H. 14th International MetallurgyMaterials Congress, 16 - 18 Kasım 2008, ss.929-935
Diffusion study between SiAlON and Fe-Alloys YAMAN ISLAK B., MANDAL H. 10th International Conference and Exhibition Ceramic Society, 17 - 21 Haziran 2007
Effect of Self-Lubricative Additives on SiAlON Ceramics YAMAN ISLAK B., MANDAL H. 2nd International Symposium on SiAlONs and Non-Oxides, 2 - 05 Aralık 2007
Investigation of mechanical properties and oxidation behaviour of Fe 28Al 0 5 1 5 W alloys containing 0 1 Y ÖZTÜRK KÖRPE N., ÇELİKYÜREK İ., GÜRLER R. Final conference COST Action 535 Thermodynamics of Alloyed Aluminides (THALU) and 4th Discussion Meeting on the Development of Innovative Iron Aluminium Alloys, Interlaken, İsviçre, 21 - 24 Ekim 2007, ss.50
Investigation of oxidation behaviours of Fe 20Al 2 5Zr and Fe 20Al 2 5Zr 2Cr containing 0 1Y ÇELİKYÜREK İ., Çolak G., ÖZTÜRK KÖRPE N., GÜRLER R. Final conference COST Action 535 Thermodynamics of Alloyed Aluminides (THALU) and 4th Discussion Meeting on the Development of Innovative Iron Aluminium Alloys, Interlaken, İsviçre, 21 - 24 Ekim 2007, ss.60
Investigation of oxidation behaviour of elektrospark deposited Fe 28Al and Fe 40Al alloys containing 0 1 Y GÜRLER R., Yagan M., ÇELİKYÜREK İ., ÖZTÜRK KÖRPE N. Final conference COST Action 535 Thermodynamics of Alloyed Aluminides (THALU) and 4th Discussion Meeting on the Development of Innovative Iron Aluminium Alloys, Interlaken, İsviçre, 21 - 24 Ekim 2007, ss.26
Kromit ve hematitin porselen karo bünyelerde renklendirici olarak kullanılması TANIŞAN B., TURAN S. 4. Uluslarası Katılımlı Seramik, Cam, Emaye, Sır ve Boya Semineri, Eskişehir, Türkiye, 26 - 28 Kasım 2007, ss.585-586
Diffusion bonding of Fe3AI to Ti6AI4V TORUN O., BAKSAN B., ÇELİKYÜREK İ., GÜRLER R. 3rd Discussion Meeting on the Development of Innovative Iron Aluminium Alloys, Düsseldorf, Almanya, 22 Ocak 2006, ss.67
Arakritik Östenitleme Sıcaklıklarından Farklı Hızlarda Soğutmanın Küresel Grafitli Dökme Demirin Mikroyapı ve Mekanik Özellikleri Üzerine Etkisi COŞKUN Ş., KILIÇLI V., ERDOĞAN M. 14. Uluslararası Metalurji ve Malzeme Kongresi (IMMC'2006), Türkiye, 16 - 19 Ekim 2006, ss.96-104
Mekanik alaşımlama yöntemi ile üretilen amorf Mg50Ni50 alaşımının ısıl kararlılığı AYBAR K., AYDINBEYLİ N., GAŞAN H., ÇELİK O. N. 11. Uluslararası Denizli Malzeme Sempozyumu, 19 - 21 Nisan 2006, ss.755-759
Diffusion Bonding of iron aluminide Fe60AI40 using pure iron interlayer GÜRLER R., TORUN O., BAKSAN B., ÇELİKYÜREK İ. 3rd Discussion Meeting on the Development of Innovative Iron Aluminium Alloys, Düsseldorf, Almanya, 22 Ocak 2006
Diffusion Bonding of Iron Aluminide Fe60Al40 Using Pure Iron Interlayer GÜRLER R., TORUN O., BAKSAN B., ÇELİKYÜREK İ. III. Dıscussion Meeting on the Development of Innovative Iron Aluminium Alloys, Düsseldorf, Almanya, 22 - 24 Ocak 2006
Proses parametrelerinin siyah pigment eldesindeki etkileri Tanışan B., Turan S. 6. Uluslararası Katılımlı Seramik Kongresi, Sakarya, Türkiye, 30 Ekim - 01 Kasım 2006, ss.221-226
Diffusion bonding of Iron aluminide Fe60Al40 using pure copper interlayer BAKSAN B., TORUN O., ÇELİKYÜREK İ., GÜRLER R. III. Dıscussion Meeting on the Development of Innovative Iron Aluminium Alloys, Düsseldorf, Almanya, 22 - 24 Ocak 2006, ss.66
Boronizing of Iron Aluminium Alloys ÇELİKYÜREK İ., BAKSAN B., TORUN O., GÜRLER R. III. Dıscussion Meeting on the Development of Innovative Iron Aluminium Alloys, Düsseldorf, Almanya, 22 - 24 Ocak 2006, ss.27
Diffusion Bonding of Fe3Al to Ti6Al4V TORUN O., BAKSAN B., ÇELİKYÜREK İ., GÜRLER R. 3. Discussion meeting on the development of innovative Iron Aluminium alloys, Düsseldorf, Almanya, 22 - 24 Ocak 2006, ss.67
Diffusion bonding of iron aluminide Fe60AI40 using pure copper interlayer BAKSAN B., TORUN O., ÇELİKYÜREK İ., GÜRLER R. 3rd Discussion Meeting on the Development of Innovative Iron Aluminium Alloys, Düsseldorf, Almanya, 22 Ocak 2006, ss.66
Demir Aluminatın Fe72Al28 borlanması ÇELİKYÜREK İ., BAKSAN B., TORUN O., GÜRLER R. I. Ulusal bor çalıştayı, Ankara, Türkiye, 28 - 29 Nisan 2005, ss.169-174
Gaz atomizasyonu ile metalik toz üretimi BAKSAN B., ÇELİKYÜREK İ., GÜRLER R. OTEKON'04 Otomotiv teknolojileri kongresi, Bursa, Türkiye, 21 - 23 Haziran 2004, ss.221-226
Ostemperlenmiş Küresel Grafitli Dökme Demirlerde Isıl İşlem Şartlarının Sertliğe Etkisi KOMAÇ O. Ş., ÇELİK O. N. 1. Ulusal Metalurji ve Malzeme Günleri, Türkiye, 27 - 28 Mayıs 2004
Selection of an oxidant for copper CMP ANIK M. 205th ECS Meeting, San Antonio, TX, Amerika Birleşik Devletleri, 9 - 13 Mayıs 2004, ss.327-337
Ag 5 10 Cd Esaslı Elektrik kontakt malzemelerinin üretimi ve alternatif akım şartlarında incelenmesi ÇELİKYÜREK İ., Yagan M., BAKSAN B., GÜRLER R. OTEKON'04 Otomotiv teknolojileri kongresi, Bursa, Türkiye, 21 - 23 Haziran 2004, ss.235-240
Ötektik fazın AZ91 alaşımının anodik davranışına etkisi ANIK M., Avcı P., Tanrıverdi A., ÇELİKYÜREK İ., BAKSAN B., GÜRLER R. I. Ulusal Metalurji ve malzeme günleri, Eskişehir, Türkiye, 27 - 28 Mayıs 2004, ss.203-208
Ag-%5-10 CdO ESASLI ELEKTRİK KONTAK MALZEMELERİNİN ÜRETİMİ VE ALTERNATİF AKIM ŞARTLARINDA İNCELENMESİ ÇELİKYÜREK İ., YAGAN M., BAKSAN B., GÜRLER R. OTEKON'04 Otomotiv Teknolojileri Kongresi, Bursa, Türkiye, 21 Haziran 2004, ss.235-240
Küresel grafitli dökme demirlerin borlanması ÇELİKYÜREK İ., BAKSAN B., GÜRLER R. 2. Uluslararsı bor sempozyumu, Eskişehir, Türkiye, 23 - 25 Eylül 2004, ss.231-235
GAZ ATOMİZASYONU İLE METALİK TOZ ÜRETİMİ BAKSAN B., ÇELİKYÜREK İ., GÜRLER R. OTEKON'04 Otomotiv Teknolojileri Kongresi, Bursa, Türkiye, 21 Haziran 2004, ss.221-226
Fe3Al Fe74Al26 alaşımının borlanması ÖZTÜRK KÖRPE N., Körpe E., BAKSAN B., ÇELİKYÜREK İ., GÜRLER R. 2. Uluslararsı bor sempozyumu, Eskişehir, Türkiye, 23 - 25 Eylül 2004, ss.243-247
Tarımsal Mekanizasyonda Ostenitik Mangan Çeliğinin Aşınma Direncine Yüzey Basıncının Etkisi KOMAÇ O. Ş., PAR B. 4. Uluslararası Tarımsal Mekanizasyon ve Enerji Kongresi, 1 - 04 Ekim 1990

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Diğer Dergilerde Yayınlanan Makaleler

Kitap & Kitap Bölümleri

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar